Baytech-MIB-403-1 Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

120

sBTANetworkConfigSNMPTrapReceiverTable

table mandatory

.1.3.6.1.4.1.4779.1.2.8.4 · 1 row entry · 2 columns

Open in standard view

Uses the baytech variant from /opt/observium/mibs/baytech.

Command help

Walk sBTANetworkConfigSNMPTrapReceiverTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Baytech-MIB-403-1' -M '/opt/observium/mibs/baytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Baytech-MIB-403-1::sBTANetworkConfigSNMPTrapReceiverTable'

A list of managers to send traps to.  The number of
entries is given by the value of sBTANetworkConfigSNMPNumTrapReceivers.
Maximum number of Trap Receivers is four.

sBTANetworkConfigSNMPTrapReceiverEntry row .1.3.6.1.4.1.4779.1.2.8.4.1

Table of managers to send traps to.

Indexes

trapIndex

Column	Syntax	OID
trapIndexmandatory The index to a trap receiver entry.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.2.8.4.1.1`
receiverAddressmandatory The IP address of the manager to send traps to.	RFC1155-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.4779.1.2.8.4.1.2`

sBTAModulesRPCTable

table mandatory

.1.3.6.1.4.1.4779.1.3.5.2 · 1 row entry · 24 columns

Open in standard view

Uses the baytech variant from /opt/observium/mibs/baytech.

Command help

Walk sBTAModulesRPCTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Baytech-MIB-403-1' -M '/opt/observium/mibs/baytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Baytech-MIB-403-1::sBTAModulesRPCTable'

Allows for control of individual outlets and individual RPC modules.

sBTAModulesRPCEntry row .1.3.6.1.4.1.4779.1.3.5.2.1

The RPCs to control and get status on.

Indexes

sBTAModulesRPCIndex

Column Syntax OID

sBTAModulesRPCIndexmandatory

The index into the RPC table. Indexes for rpcs attached to ds74 modules are calculate with the following formula:
((module - 2) * 4) + port. For example module 3 port 1 = index 5.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.2.1.1

sBTAModulesRPCNamemandatory

The name (unit id) of the rpc.

RFC1213-MIBDisplayStringr/w

.1.3.6.1.4.1.4779.1.3.5.2.1.2

sBTAModulesRPCFirmwareVersionmandatory

The firware version of the rpc.

RFC1213-MIBDisplayString

.1.3.6.1.4.1.4779.1.3.5.2.1.3

sBTAModulesRPCCurrentmandatory

The current reading for the power strip.
If current measurement is not installed this value will always read 0.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.2.1.4

sBTAModulesRPCMaxCurrentmandatory

The maximum detected current reading for the power strip.
If current measurement is not installed this value will always read 0.
Setting this value to 0 will clear the maximum current detected.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.2.1.5

sBTAModulesRPCVoltagemandatory

The voltage reading for the power strip.
If voltage measurement is not installed this value will always read 0.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.2.1.6

sBTAModulesRPCPowermandatory

The power reading for the power strip.
If power measurement is not installed this value will always read 0.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.2.1.7

sBTAModulesRPCTemperaturemandatory

The temperature reading for the power strip. Readings are in degrees C.
If temperature measurement is not installed this value will always read 0.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.2.1.8

sBTAModulesRPCRebootTimeoutmandatory

The length of off time for automatic reboot sequences.
Currently a read-only value set to the fixed reboot timeout.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.2.1.9

sBTAModulesRPCAllOutletsCmdmandatory

Turns all outlets on, off or reboot.
0 = off
1 = on
2 = reboot

A get will return unknown (6).

Enumerationr/w

Enumerated Values:

0	off
1	on
2	reboot
3	lockon
4	lockoff
5	unlock
6	unknown

.1.3.6.1.4.1.4779.1.3.5.2.1.10

sBTAModulesRPCAllOutletsStatusmandatory

Reports status of outlets in a comma deliminated string.
0 = off
1 = on
2 = reboot
3 = locked on
4 = locked off

RFC1213-MIBDisplayString

.1.3.6.1.4.1.4779.1.3.5.2.1.11

sBTAModulesRPCCurrentAlarmThresholdmandatory

The current alarm threshold level *10. A value of 105 will set the level to 10.5.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.2.1.12

sBTAModulesRPCOverVoltageThresholdmandatory

The over voltage alarm threshold level *10. A value of 105 will set the level to 10.5.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.2.1.13

sBTAModulesRPCUnderVoltageThresholdmandatory

The under voltage alarm threshold level *10. A value of 105 will set the level to 10.5.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.2.1.14

sBTAModulesRPCNumberOfOutletsmandatory

Number of outlets for this RPC.
This will be the size of outlet table for this RPC index.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.2.1.15

sBTAModulesRPCCircuitBreakermandatory

Status of circuit breaker in power strip. 0=off 1=on.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.4779.1.3.5.2.1.16

sBTAModulesRPCOverTempThresholdmandatory

The over temperature alarm threshold level *10. A value of 505 will set the level to 50.5.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.2.1.17

sBTAModulesRPCUnitVAmandatory

Total Volt-Amps for this RPC.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.2.1.18

sBTAModulesRPCNumberOfBreakersmandatory

Number of breakers for this RPC.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.2.1.19

sBTAModulesRPCLowCurrentThresholdmandatory

Low current threshold for this RPC.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.2.1.20

sBTAModulesRPCVoltageSourcemandatory

Voltage source for this RPC.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.2.1.21

sBTAModulesRPCSourceSwitchCountmandatory

Count of Voltage Source Switches for this RPC.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.2.1.22

sBTAModulesRPCNumberOfSensorsmandatory

Number of environmental sensors for this RPC.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.2.1.23

sBTAModulesRPCTypemandatory

The type of RPC installed at the indexed location.

RFC1213-MIBDisplayString

.1.3.6.1.4.1.4779.1.3.5.2.1.24

sBTAModulesRPCOutletTable

table mandatory

.1.3.6.1.4.1.4779.1.3.5.3 · 1 row entry · 4 columns

Open in standard view

Uses the baytech variant from /opt/observium/mibs/baytech.

Command help

Walk sBTAModulesRPCOutletTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Baytech-MIB-403-1' -M '/opt/observium/mibs/baytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Baytech-MIB-403-1::sBTAModulesRPCOutletTable'

Allows for control of individual outlets. The number of
entries is contained in the sBTAModulesRPCOutletTableSize OID.

sBTAModulesRPCOutletEntry row .1.3.6.1.4.1.4779.1.3.5.3.1

The outlets to control and get status on.

Indexes

sBTAModulesRPCOutletModuleIndex sBTAModulesRPCOutletIndex

Column Syntax OID

sBTAModulesRPCOutletModuleIndexmandatory

The index to the outlet entry.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.3.1.1

sBTAModulesRPCOutletIndexmandatory

The index to the outlet entry.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.3.1.2

sBTAModulesRPCOutletStatemandatory

Getting this variable will return the state of the outlet.
Valid return states are unknown, on, off, lockon, lockoff.
0 = off
1 = on
2 = reboot
3 = lockon (outlet is on and no changes are allowed)
4 = lockoff (outlet is…

Enumerationr/w

Enumerated Values:

0	off
1	on
2	reboot
3	lockon
4	lockoff
5	unlock
6	unknown

.1.3.6.1.4.1.4779.1.3.5.3.1.3

sBTAModulesRPCOutletNamemandatory

The name of the outlet. Maximum size is 16 characters.

RFC1213-MIBDisplayStringr/w

.1.3.6.1.4.1.4779.1.3.5.3.1.4

sBTAModulesRPCModPortTable

table mandatory

.1.3.6.1.4.1.4779.1.3.5.5 · 1 row entry · 25 columns

Open in standard view

Uses the baytech variant from /opt/observium/mibs/baytech.

Command help

Walk sBTAModulesRPCModPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Baytech-MIB-403-1' -M '/opt/observium/mibs/baytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Baytech-MIB-403-1::sBTAModulesRPCModPortTable'

Allows for control of individual outlets and individual RPC modules. The number of
entries is contained in the sBTAModulesNumberOfRPCModules OID.

sBTAModulesRPCModPortEntry row .1.3.6.1.4.1.4779.1.3.5.5.1

The RPCs to control and get status on.

Indexes

sRPCModuleIndex sRPCPortIndex

Column Syntax OID

sRPCModuleIndexmandatory

The module number index into the RPC table.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.1

sRPCPortIndexmandatory

The port number index into the RPC table. In the case of ds30 modules this number is always 1.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.2

sRPCTypemandatory

Type of RPC at the module, port index.

RFC1213-MIBDisplayString

.1.3.6.1.4.1.4779.1.3.5.5.1.3

sRPCNamemandatory

The name (unit id) of the rpc module.

RFC1213-MIBDisplayStringr/w

.1.3.6.1.4.1.4779.1.3.5.5.1.4

sRPCFirmwareVersionmandatory

The firware version of the rpc module.

RFC1213-MIBDisplayString

.1.3.6.1.4.1.4779.1.3.5.5.1.5

sRPCCurrentmandatory

The current reading for the power strip.
If current measurement is not installed this value will always read 0.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.6

sRPCMaxCurrentmandatory

The maximum detected current reading for the power strip.
If current measurement is not installed this value will always read 0.
Setting this value to 0 will clear the maximum current detected.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.7

sRPCVoltagemandatory

The voltage reading for the power strip.
If voltage measurement is not installed this value will always read 0.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.8

sRPCPowermandatory

The power reading for the power strip.
If power measurement is not installed this value will always read 0.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.9

sRPCTemperaturemandatory

The temperature reading for the power strip. Readings are in degrees C.
If temperature measurement is not installed this value will always read 0.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.10

sRPCRebootTimeoutmandatory

The length of off time for automatic reboot sequences.
Currently a read-only value set to the fixed reboot timeout.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.11

sRPCAllOutletsCmdmandatory

Turns all outlets on, off or reboot.
0 = off
1 = on
2 = reboot
3 = lockon (will lock outlets to on state)
4 = lockoff (will lock outlets to off state)
5 = unlock (will unlock all outlets)

A get will retur…

Enumerationr/w

Enumerated Values:

0	off
1	on
2	reboot
3	lockon
4	lockoff
5	unlock
6	unknown

.1.3.6.1.4.1.4779.1.3.5.5.1.12

sRPCAllOutletsStatusmandatory

Reports status of outlets in a comma deliminated string.
0 = off
1 = on
2 = reboot
3 = locked on
4 = locked off

RFC1213-MIBDisplayString

.1.3.6.1.4.1.4779.1.3.5.5.1.13

sRPCCurrentAlarmThresholdmandatory

The current alarm threshold level *10. A value of 105 will set the level to 10.5.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.14

sRPCOverVoltageThresholdmandatory

The over voltage alarm threshold level *10. A value of 105 will set the level to 10.5.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.15

sRPCUnderVoltageThresholdmandatory

The under voltage alarm threshold level *10. A value of 105 will set the level to 10.5.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.16

sRPCNumberOfOutletsmandatory

Number of outlets for this RPC.
This will be the size of outlet table for this RPC index.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.17

sRPCCircuitBreakermandatory

Status of circuit breaker in power strip. 0=off 1=on.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.4779.1.3.5.5.1.18

sRPCOverTempThresholdmandatory

The over temperature alarm threshold level *10. A value of 505 will set the level to 50.5.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.19

sRPCUnitVAmandatory

Number of outlets for this RPC.
This will be the size of outlet table for this RPC index.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.20

sRPCNumberOfBreakersmandatory

Number of breakers for this RPC.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.21

sRPCLowCurrentThresholdmandatory

Low current threshold for this RPC.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.22

sRPCVoltageSourcemandatory

Voltage source for this RPC.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.23

sRPCSourceSwitchCountmandatory

Voltage source switch count for this RPC.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.24

sRPCNumberOfSensorsmandatory

Number of sensors for this RPC.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.5.1.25

sBTAModulesRPCModPortOutletTable

table mandatory

.1.3.6.1.4.1.4779.1.3.5.6 · 1 row entry · 5 columns

Open in standard view

Uses the baytech variant from /opt/observium/mibs/baytech.

Command help

Walk sBTAModulesRPCModPortOutletTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Baytech-MIB-403-1' -M '/opt/observium/mibs/baytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Baytech-MIB-403-1::sBTAModulesRPCModPortOutletTable'

Allows for control of individual outlets. The number of
entries is contained in the sBTAModulesRPCOutletTableSize OID.

sBTAModulesRPCModPortOutletEntry row .1.3.6.1.4.1.4779.1.3.5.6.1

The outlets to control and get status on.

Indexes

sRPCOutletModuleIndex sRPCOutletPortIndex sRPCOutletIndex

Column Syntax OID

sRPCOutletModuleIndexmandatory

The module index to the outlet entry.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.6.1.1

sRPCOutletPortIndexmandatory

The port index to the outlet entry. In the case of ds30s this number is always 1.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.6.1.2

sRPCOutletIndexmandatory

The outlet index to the outlet entry.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.6.1.3

sRPCOutletStatemandatory

Enumerationr/w

Enumerated Values:

0	off
1	on
2	reboot
3	lockon
4	lockoff
5	unlock
6	unknown

.1.3.6.1.4.1.4779.1.3.5.6.1.4

sRPCOutletNamemandatory

The name of the outlet. Maximum size is 16 characters.

RFC1213-MIBDisplayStringr/w

.1.3.6.1.4.1.4779.1.3.5.6.1.5

sBTAModulesRPCCurrentGroupsCurrentTable

table mandatory

.1.3.6.1.4.1.4779.1.3.5.8 · 1 row entry · 5 columns

Open in standard view

Uses the baytech variant from /opt/observium/mibs/baytech.

Command help

Walk sBTAModulesRPCCurrentGroupsCurrentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Baytech-MIB-403-1' -M '/opt/observium/mibs/baytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Baytech-MIB-403-1::sBTAModulesRPCCurrentGroupsCurrentTable'

A list of total current for RPCs in each current group

sBTAModulesRPCCurrentGroupsCurrentEntry row .1.3.6.1.4.1.4779.1.3.5.8.1

Table of total current measurement by group

Indexes

groupCurrentIndex

Column	Syntax	OID
groupCurrentIndexmandatory The index to a group total current.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.3.5.8.1.1`
groupCurrentmandatory Current total for all RPCs in group.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.3.5.8.1.2`
rpcGroupmandatory A character string listing the RPCs, by port index, that will be included in a measurement of total current. For each group, a sum will be periodically computed of currents of all listed RPCs, which will be compared to…	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.4779.1.3.5.8.1.3`
warningThresholdmandatory The current level, in tenths of an amp, that will cause a Current Level Warning trap to be sent if the total current for the associated group if exceeded. Conversely, a Current Level Warning Clear trap will be sent w…	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.3.5.8.1.4`
emergencyThresholdmandatory The current level, in tenths of an amp, that will cause a Current Level Emergency trap to be sent if the total current for the associated group if exceeded. Conversely, a Current Level Emergeny Clear trap will be sen…	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.3.5.8.1.5`

sBTAModulesRPCBreakersTable

table mandatory

.1.3.6.1.4.1.4779.1.3.5.9 · 1 row entry · 9 columns

Open in standard view

Uses the baytech variant from /opt/observium/mibs/baytech.

Command help

Walk sBTAModulesRPCBreakersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Baytech-MIB-403-1' -M '/opt/observium/mibs/baytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Baytech-MIB-403-1::sBTAModulesRPCBreakersTable'

Allows monitoring of individual outlet strips on RPCs.

sBTAModulesRPCBreakersEntry row .1.3.6.1.4.1.4779.1.3.5.9.1

Status organization by breaker.

Indexes

sBTAModulesRPCBreakersModulesIndex sBTAModulesRPCBreakersBreakersIndex

Column Syntax OID

sBTAModulesRPCBreakersModulesIndexmandatory

The index into the RPC table.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.9.1.1

sBTAModulesRPCBreakersBreakersIndexmandatory

The index into the RPC breaker table.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.9.1.2

sBTAModulesRPCBreakersCircuitBreakermandatory

Status of circuit breaker in power strip. 0=off 1=on.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.4779.1.3.5.9.1.3

sBTAModulesRPCBreakersCurrentmandatory

The detected current reading for the power strip.
If current measurement is not installed this value will always read 0.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.9.1.4

sBTAModulesRPCBreakersMaxCurrentmandatory

The maximum detected current reading for the power strip.
If current measurement is not installed this value will always read 0.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.9.1.5

sBTAModulesRPCBreakersVoltagemandatory

The voltage reading for the power strip.
If voltage measurement is not installed this value will always read 0.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.9.1.6

sBTAModulesRPCBreakersPowermandatory

The power reading for the power strip.
If voltage measurement is not installed this value will always read 0.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.9.1.7

sBTAModulesRPCBreakersVAmandatory

The volt-amps reading for the power strip.
If voltage measurement is not installed this value will always read 0.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.9.1.8

sBTAModulesRPCBreakersCurrentAlarmThresholdmandatory

The current alarm threshold level *10. A value of 105 will set the level to 10.5.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.9.1.9

sRPCModPortBreakersTable

table mandatory

.1.3.6.1.4.1.4779.1.3.5.10 · 1 row entry · 10 columns

Open in standard view

Uses the baytech variant from /opt/observium/mibs/baytech.

Command help

Walk sRPCModPortBreakersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Baytech-MIB-403-1' -M '/opt/observium/mibs/baytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Baytech-MIB-403-1::sRPCModPortBreakersTable'

Allows monitoring of individual outlet strips on RPCs.

sRPCModPortBreakersEntry row .1.3.6.1.4.1.4779.1.3.5.10.1

Status organization by breaker.

Indexes

sRPCBreakersModIndex sRPCBreakersPortIndex sRPCBreakersBreakersIndex

Column Syntax OID

sRPCBreakersModIndexmandatory

The module index into the RPC breaker table.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.10.1.1

sRPCBreakersPortIndexmandatory

The port index into the RPC breaker table.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.10.1.2

sRPCBreakersBreakersIndexmandatory

The breaker index into the RPC breaker table.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.10.1.3

sRPCBreakersCircuitBreakermandatory

Status of circuit breaker in power strip. 0=off 1=on.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.4779.1.3.5.10.1.4

sRPCBreakersCurrentmandatory

The detected current reading for the power strip.
If current measurement is not installed this value will always read 0.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.10.1.5

sRPCBreakersMaxCurrentmandatory

The maximum detected current reading for the power strip.
If current measurement is not installed this value will always read 0.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.10.1.6

sRPCBreakersVoltagemandatory

The voltage reading for the power strip.
If voltage measurement is not installed this value will always read 0.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.10.1.7

sRPCBreakersPowermandatory

The power reading for the power strip.
If voltage measurement is not installed this value will always read 0.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.10.1.8

sRPCBreakersVAmandatory

The volt-amps reading for the power strip.
If voltage measurement is not installed this value will always read 0.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.10.1.9

sRPCBreakersCurrentAlarmThresholdmandatory

The current alarm threshold level x10. A value of 105 will set the level to 10.5.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.10.1.10

sRPCOutletGroupTable

table mandatory

.1.3.6.1.4.1.4779.1.3.5.11 · 1 row entry · 4 columns

Open in standard view

Uses the baytech variant from /opt/observium/mibs/baytech.

Command help

Walk sRPCOutletGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Baytech-MIB-403-1' -M '/opt/observium/mibs/baytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Baytech-MIB-403-1::sRPCOutletGroupTable'

Allows control of outlets via a group of up to four outlets.

sRPCOutletGroupEntry row .1.3.6.1.4.1.4779.1.3.5.11.1

Organized by group number.

Indexes

sRPCOutletGroupIndex

Column Syntax OID

sRPCOutletGroupIndexmandatory

The index into the outlet group table.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.3.5.11.1.1

sRPCOutletGroupNamemandatory

The name of the outlet group.

RFC1213-MIBDisplayStringr/w

.1.3.6.1.4.1.4779.1.3.5.11.1.2

sRPCOutletGroupOutletsmandatory

The list of outlets in the outlet group.
Format is mod.port.outlet,mod.port.outlet up to 4 outlets.

RFC1213-MIBDisplayStringr/w

.1.3.6.1.4.1.4779.1.3.5.11.1.3

sRPCOutletGroupCmdmandatory

Command for outlet group. Same rules as rpc commands.

Enumerationr/w

Enumerated Values:

0	off
1	on
2	reboot
3	lockon
4	lockoff
5	unlock
6	unknown

.1.3.6.1.4.1.4779.1.3.5.11.1.4

sBTAControlUserTable

table mandatory

.1.3.6.1.4.1.4779.1.4.4 · 1 row entry · 7 columns

Open in standard view

Uses the baytech variant from /opt/observium/mibs/baytech.

Command help

Walk sBTAControlUserTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Baytech-MIB-403-1' -M '/opt/observium/mibs/baytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Baytech-MIB-403-1::sBTAControlUserTable'

A list of users and user information.
The number of entries is contained in the sBTAControlNumOfLoggedUsers OID.

sBTAControlUserEntry row .1.3.6.1.4.1.4779.1.4.4.1

The users to get status on.

Indexes

sBTAControlUserIndex

Column Syntax OID

sBTAControlUserIndexmandatory

The index to the user entry.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.4.4.1.1

sBTAControlUserNamemandatory

The username of the user.

RFC1213-MIBDisplayString

.1.3.6.1.4.1.4779.1.4.4.1.2

sBTAControlUserAddressmandatory

The IP address of the user.

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.4779.1.4.4.1.3

sBTAControlUserConnectionmandatory

Type of connection.
If unknown, user is logging out or the connection is invalid.

Enumeration

Enumerated Values:

0	serialport
1	telnet
2	ssh
4	unknown

.1.3.6.1.4.1.4779.1.4.4.1.4

sBTAControlUserConnModulemandatory

If the user is connected to a module, this value will
report the module number connected to.
If the value is 0 the user is not connected to a module.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.4.4.1.5

sBTAControlUserConnPortmandatory

The port number with in a module that the user is connected to.
This usually only applies to connections to DS74 serial modules.
Intelligent modules connections are always made on port 1.
If value is 0 the user is not c…

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4779.1.4.4.1.6

sBTAControlUserTerminateUsermandatory

Settings this OID to anything but 0 will terminate (log out) the user.
A get of this OID will return 0.

Enumerationr/w

Enumerated Values:

terminate

.1.3.6.1.4.1.4779.1.4.4.1.7

sBTAModulesEnvironmentalObjectsTable

table mandatory

.1.3.6.1.4.1.4779.1.6.1 · 1 row entry · 12 columns

Open in standard view

Uses the baytech variant from /opt/observium/mibs/baytech.

Command help

Walk sBTAModulesEnvironmentalObjectsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Baytech-MIB-403-1' -M '/opt/observium/mibs/baytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Baytech-MIB-403-1::sBTAModulesEnvironmentalObjectsTable'

Allows monitoring of individual outlet strips on RPCs.

sBTAModulesEnvironmentalObjectsEntry row .1.3.6.1.4.1.4779.1.6.1.1

Status organization by sensor.

Indexes

sBTAModulesEnvironmentalModulesIndex sBTAModulesEnvironmentalSensorsIndex

Column	Syntax	OID
sBTAModulesEnvironmentalModulesIndexmandatory Module Index for Environemntal table	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.1.1.1`
sBTAModulesEnvironmentalSensorsIndexmandatory Sensor Index for Environemntal table	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.1.1.2`
sBTAModulesEnvironmentalTypemandatory Environmental Object Type.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.1.1.3`
sBTAModulesEnvironmentalNamemandatory The name for the environmental object.	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.4779.1.6.1.1.4`
sBTAModulesEnvironmentalMeasurementmandatory The measurement or state for the object.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.1.1.5`
sBTAModulesEnvironmentalHiThresholdmandatory Hi threshold for object.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.1.1.6`
sBTAModulesEnvironmentalLoThresholdmandatory Lo threshold for object.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.1.1.7`
sBTAModulesEnvironmentalMaxmandatory Max value recorded for object since last reset.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.1.1.8`
sBTAModulesEnvironmentalMinmandatory Min value recorded for object since last reset.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.1.1.9`
sBTAModulesEnvironmentalHiThresholdEnmandatory Hi threshold enable for object.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.1.1.10`
sBTAModulesEnvironmentalLoThresholdEnmandatory Lo threshold enable for object.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.1.1.11`
sBTAModulesEnvironmentalStateTrapEnmandatory Trap enable for environmental sensors with contacts.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.1.1.12`

sRPCEnvironmentalObjectsTable

table mandatory

.1.3.6.1.4.1.4779.1.6.2 · 1 row entry · 13 columns

Open in standard view

Uses the baytech variant from /opt/observium/mibs/baytech.

Command help

Walk sRPCEnvironmentalObjectsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Baytech-MIB-403-1' -M '/opt/observium/mibs/baytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Baytech-MIB-403-1::sRPCEnvironmentalObjectsTable'

Allows monitoring of individual outlet strips on RPCs.

sRPCEnvironmentalObjectsEntry row .1.3.6.1.4.1.4779.1.6.2.1

Status organization by sensor.

Indexes

sBTAEnvironmentalModuleIndex sBTAEnvironmentalPortIndex sBTAEnvironmentalSensorsIndex

Column	Syntax	OID
sRPCEnvironmentalModuleIndexmandatory Module Index for Environemntal table	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.2.1.1`
sRPCEnvironmentalPortIndexmandatory Port Index for Environemntal table	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.2.1.2`
sRPCEnvironmentalSensorsIndexmandatory Sensor Index for Environemntal table	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.2.1.3`
sRPCEnvironmentalTypemandatory Environmental Object Type.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.2.1.4`
sRPCEnvironmentalNamemandatory The name for the environmental object.	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.4779.1.6.2.1.5`
sRPCEnvironmentalMeasurementmandatory The measurement or state for the object.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.2.1.6`
sRPCEnvironmentalHiThresholdmandatory Hi threshold for object.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.2.1.7`
sRPCEnvironmentalLoThresholdmandatory Lo threshold for object.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.2.1.8`
sRPCEnvironmentalMaxmandatory Max value recorded for object since last reset.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.2.1.9`
sRPCEnvironmentalMinmandatory Min value recorded for object since last reset.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.2.1.10`
sRPCEnvironmentalHiThresholdEnmandatory Hi threshold enable for object.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.2.1.11`
sRPCEnvironmentalLoThresholdEnmandatory Lo threshold enable for object.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.2.1.12`
sRPCEnvironmentalStateTrapEnmandatory Trap enable for environmental sensors with contacts.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4779.1.6.2.1.13`