BROCADE-MCT-CLUSTER-MIB Table View

This table provides Multi Chassis Trunking Cluster information.

brcdMctClusterEntry row .1.3.6.1.4.1.1991.1.1.12.1.1.2.1

An entry in this table represents the MCT Cluster.

Indexes

brcdMctClusterId

Column	Syntax	OID
brcdMctClusterId The id for this MCT Cluster.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.1
brcdMctClusterName The name of this MCT Cluster. This object cannot be modified after creation.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.2
brcdMctClusterRbridgeId The remote bridge id of this MCT Cluster. This remote bridge id is used by the peer to communicate with this cluster node.	Unsigned32r/w Constraints: range: 1-35535	.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.3
brcdMctClusterSessionVlan The session VLAN of this MCT Cluster. The cluster session VLAN can be in the range of 1 to 4090, but cannot be default VLAN. The brcdMctClusterSessionVlan and brcdMctClusterKeepAliveVlan cannot be same.	FOUNDRY-SN-SWITCH-GROUP-MIBBrcdVlanIdTCr/w Type Constraints: range: 1..4090	.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.4
brcdMctClusterKeepAliveVlan The keep-alive VLAN of this MCT Cluster. The keep-alive VLAN can be in the range of 0 to 4090, but cannot be default VLAN. The brcdMctClusterSessionVlan and brcdMctClusterKeepAliveVlan cannot be same. The…	FOUNDRY-SN-SWITCH-GROUP-MIBBrcdVlanIdOrNoneTCr/w Type Constraints: range: 0..4090	.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.5
brcdMctClusterClientIsolationMode The client isolation mode of this MCT Cluster. When this object is set to loose(1), then whenever the CCP goes down the client performs the Master/Slave negotiation. After negotiation, the Slave shuts dow…	Enumerationr/w Enumerated Values: 1 loose 2 strict	.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.6
brcdMctClusterClientShutdown The client shutdown state of this MCT Cluster. When set to true, shutdown all the local client interfaces in the cluster. This would result in failover of traffic to the cluster peer.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.7
brcdMctClusterMemberVlans The list of the member VLAN ids on which this MCT cluster is operating. This would be the range of VLANs for which there would be MAC synchronization. The VLANs which are not continuous are represented with a space sepa…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.8
brcdMctClusterActiveMemberVlans The list of the active member VLANs of this MCT Cluster. The VLANs which are not continuous are represented with a space separated and continuous VLANs represented with the range. For example: 2 5 10 to 40 100	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.9
brcdMctClusterDeploy The admin status of this MCT Cluster. When this object is set to deploy, consistency check of the entire cluster configuration is done. Once the cluster is deployed, the configuration cannot be modified e…	BrcdDeployStatusr/w Type Values: 1 deploy 2 undeploy	.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.10
brcdMctClusterDeployFailureReason The last failure reason for cluster deploy operation through SNMP. The following failure reason codes are supported: none(1) - The last deploy is successful. unknown(2) …	Enumeration Enumerated Values: 1 none 2 unknown 3 rBridgeIdNotConfigured 4 sessionVlanNotConfigured 5 iclNotConfigured 6 peerNotConfigured 7 iclIsMrpSecondaryInterface 8 iclIsErpRplInterface 9 iclIsErpMsInterface 10 iclIsErpFsInterface 11 iclNotInSessionVlan 12 iclNotInMemberVlans 13 nonIclInterfacesInSessionVlan 14 mgmtVeNotConfiguredInSessionVlan 15 mgmtIpNotConfiguredInSessionVlan 16 mgmtIpIsUsedInPeerOrClientConfig 17 mgmtIpNotInSubnetOfPeerIp 18 rBridgeIdIsUsedInPeerOrClientConfig 19 clientInterfaceIsNotInMemberVlan 20 defaultVlanConfigForSessionOrMemberVlan	.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.11
brcdMctClusterRowStatus The row status of this MCT Cluster. All the values of RowStatus are supported. The notInService(2) indicates that cluster is not yet activated. The following objects should be present in the same SNMP set…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.12

This table provides Multi Chassis Trunking Cluster information.

brcdMctClusterIclEntry row .1.3.6.1.4.1.1991.1.1.12.1.1.3.1

An entry in this table represents the MCT Cluster ICL.

Indexes

brcdMctClusterId brcdMctClusterIclName

Column	Syntax	OID
brcdMctClusterIclName The name of ICL.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.1991.1.1.12.1.1.3.1.1
brcdMctClusterIclIfIndex The interface index of the ICL. The ICL interface can be a single ethernet interface or trunk interface index.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.1991.1.1.12.1.1.3.1.2
brcdMctClusterIclRowStatus The row status of this MCT Cluster ICL entry. Only the active(1), createAndGo(4) and destroy (6) values of RowStatus are supported. If the cluster is deployed, then brcdMctClusterIclRowStatus cannot be se…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1991.1.1.12.1.1.3.1.3

This table provides Multi Chassis Trunking Cluster Peers
information.
The objects in this table cannot be modified after the
cluster is deployed

brcdMctClusterPeerEntry row .1.3.6.1.4.1.1991.1.1.12.1.1.4.1

An entry in this table represents the MCT Cluster Peer.

Indexes

brcdMctClusterId brcdMctClusterPeerAddrType brcdMctClusterPeerAddr

Column	Syntax	OID
brcdMctClusterPeerAddrType The address type of this MCT Cluster Peer. The supported address types are ipv4(1) and ipv6(2).	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.1991.1.1.12.1.1.4.1.1
brcdMctClusterPeerAddr The IPv4/IPv6 address of this MCT Cluster Peer.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.1991.1.1.12.1.1.4.1.2
brcdMctClusterPeerRbridgeId The remote bridge Id of this MCT Cluster Peer.	Unsigned32r/w Constraints: range: 1-35535	.1.3.6.1.4.1.1991.1.1.12.1.1.4.1.3
brcdMctClusterPeerIclName The ICL name of this MCT Cluster Peer. This should be same as brcdMctClusterIclName object for this MCT Cluster	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.1991.1.1.12.1.1.4.1.4
brcdMctClusterPeerFastFailover The fast failover status of this MCT Cluster Peer. When this object is set to enable, as soon as the ICL interface goes down the CCP goes down. All the remote MACs are flushed. When set to …	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1991.1.1.12.1.1.4.1.5
brcdMctClusterPeerKeepAliveTime The keep-alive time in seconds of this MCT Cluster Peer. The range of keep-alive time is 0 to 21845. The default is 30 seconds.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.12.1.1.4.1.6
brcdMctClusterPeerHoldTime The hold time in seconds of this MCT Cluster Peer. The hold time must be at least 3 times the keep alive time. The range of hold time is 3 to 65535. The default is 90 seconds.	Unsigned32r/w Constraints: range: 3-65535	.1.3.6.1.4.1.1991.1.1.12.1.1.4.1.7
brcdMctClusterPeerActiveVlans The list of the active member VLANs of this MCT Cluster Peer. The VLANs which are not continuous are represented with a space separated and continuous VLANs represented with the range. For example: 2 5 10 to 40 100	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1991.1.1.12.1.1.4.1.8
brcdMctClusterPeerOperStatus The operational status of this MCT Cluster Peer. The follwoing values are supported for operational status unknown(1) - Unknown state noState(2) - The peer state machine is not started init(3) - The peer state …	Enumeration Enumerated Values: 1 unknown 2 noState 3 init 4 ccpUp 5 ccpDown 6 reachable	.1.3.6.1.4.1.1991.1.1.12.1.1.4.1.9
brcdMctClusterPeerDownReason The reason for the brcdMctClusterPeerOperStatus is in ccpDown(3) state. The following values are supported as down reason: none(1) - Peer is not in down state loopbackInterfaceDown(2) - Loopback…	Enumeration Enumerated Values: 1 none 2 loopbackInterfaceDown 3 iclInterfaceDown 4 upgradeInProgress 5 routeNotAvailable 6 iclVeDown 7 rBridgeIdMismatch 8 clusterIdMismatch 9 keepAliveTimeMismatch 10 holdTimeMismatch 11 fastFailoverMismatch 12 shutdownMesgFromPeer 13 tcpKeepAliveTimeout 14 tcpConnCloseMesg 15 holdTimeoutExpired 16 sendStateTimeoutExpired 17 recvStateTimeoutExpired 18 initMesgSendFail 19 keepAliveMesgSendFail 20 invalidAppMesgRecv 21 badProtocolVersionPktRecv 22 badPduLengthPktRecv 23 unknownCcpPktRecv 24 invalidCcpPktRecv 25 internalCcpErrorRecv 26 ccpTcpCommFail	.1.3.6.1.4.1.1991.1.1.12.1.1.4.1.10
brcdMctClusterPeerUpTime The time since this MCT Cluster Peer is up. If the brcdMctClusterPeerOperStatus is not in ccpUp(2) state, then zero will be returned.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.1991.1.1.12.1.1.4.1.11
brcdMctClusterPeerRowStatus The row status of this MCT Cluster Peer. Only the active(1), notInService(2), createAndGo(4) and destroy(6) values of RowStatus are supported. The notInService(2) indicates that cluster is not yet activated. …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1991.1.1.12.1.1.4.1.12

This table provides Multi Chassis Trunking Cluster Clients information.

brcdMctClusterClientEntry row .1.3.6.1.4.1.1991.1.1.12.1.1.5.1

An entry in this table represents the MCT Cluster Client.

Indexes

brcdMctClusterId brcdMctClusterClientName

Column	Syntax	OID
brcdMctClusterClientName The name of this MCT Cluster client.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.1991.1.1.12.1.1.5.1.1
brcdMctClusterClientRbridgeId The remote bridge id of this MCT Cluster client. This remote bridge ID is used by the client to communicate with this cluster node.	Unsigned32r/w Constraints: range: 1-35535	.1.3.6.1.4.1.1991.1.1.12.1.1.5.1.2
brcdMctClusterClientIfIndex The interface index which is connected to this MCT Cluster client. The interface should be an ethernet interface or trunk interface.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.1991.1.1.12.1.1.5.1.3
brcdMctClusterClientOperStatus The operational status of this MCT Cluster client. The following values are taken by the operational status: unknown(1) - Unknown state noState(2) - The peer state machine is not started init(3) - T…	Enumeration Enumerated Values: 1 unknown 2 noState 3 init 4 localDeploy 5 adminUp 6 remoteUp 7 localUp 8 up 9 slave 10 master 11 masterPeerUp	.1.3.6.1.4.1.1991.1.1.12.1.1.5.1.4
brcdMctClusterClientDeploy The admin status of this MCT Cluster client. When this object is set to deploy and if cluster is not deployed, the configuration will be taken but the client state machine will not be started. The objects…	BrcdDeployStatusr/w Type Values: 1 deploy 2 undeploy	.1.3.6.1.4.1.1991.1.1.12.1.1.5.1.5
brcdMctClusterClientDeployFailureReason The failure reason for the last cluster client deploy operation through SNMP. The following failure reasons are supported: none(1) - The last deploy is successful. unknown(2) …	Enumeration Enumerated Values: 1 none 2 unknown 3 rBridgeIdNotConfigured 4 clientInterfaceNotConfigured 5 rBridgeIdUsedInClusterOrPeer 6 clientInterfacePhysicallyNotUp 7 clientInterfaceIsMrpRingInterface 8 clientInterfaceIsErpInterface 9 iclIsNotInMemberVlan	.1.3.6.1.4.1.1991.1.1.12.1.1.5.1.6
brcdMctClusterClientRowStatus The row status of this MCT Cluster client. All the values of RowStatus are supported. The notInService(2) indicates that cluster client is not deployed. The brcdMctClusterClientRbridgeId and brcdMctCluste…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1991.1.1.12.1.1.5.1.7