BROCADE-ACL-MIB

        MIB module for management of ACLs.
    
Source file
BROCADE-ACL-MIB
Last revised
Identity
brocadeACLMIB
Base OID
1.3.6.1.4.1.1588.3.1.16
Imported Objects
Brocade-REG-MIB bcsiModules
IF-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the brocade MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'BROCADE-ACL-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'BROCADE-ACL-MIB::brocadeACLMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BROCADE-ACL-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BROCADE-ACL-MIB::brocadeACLMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (39)
.1.3.6.1.4.1.1588.3.1.16
.1.3.6.1.4.1.1588.3.1.16.0
.1.3.6.1.4.1.1588.3.1.16.1
.1.3.6.1.4.1.1588.3.1.16.1.1
.1.3.6.1.4.1.1588.3.1.16.1.1.1
.1.3.6.1.4.1.1588.3.1.16.1.1.1.1
.1.3.6.1.4.1.1588.3.1.16.1.1.1.2
.1.3.6.1.4.1.1588.3.1.16.1.1.1.3
.1.3.6.1.4.1.1588.3.1.16.1.1.1.4
.1.3.6.1.4.1.1588.3.1.16.1.2
.1.3.6.1.4.1.1588.3.1.16.1.2.1
.1.3.6.1.4.1.1588.3.1.16.1.2.1.1
.1.3.6.1.4.1.1588.3.1.16.1.2.1.10
.1.3.6.1.4.1.1588.3.1.16.1.2.1.11
.1.3.6.1.4.1.1588.3.1.16.1.2.1.12
.1.3.6.1.4.1.1588.3.1.16.1.2.1.13
.1.3.6.1.4.1.1588.3.1.16.1.2.1.14
.1.3.6.1.4.1.1588.3.1.16.1.2.1.15
.1.3.6.1.4.1.1588.3.1.16.1.2.1.16
.1.3.6.1.4.1.1588.3.1.16.1.2.1.17
.1.3.6.1.4.1.1588.3.1.16.1.2.1.18
.1.3.6.1.4.1.1588.3.1.16.1.2.1.19
.1.3.6.1.4.1.1588.3.1.16.1.2.1.2
.1.3.6.1.4.1.1588.3.1.16.1.2.1.20
.1.3.6.1.4.1.1588.3.1.16.1.2.1.21
.1.3.6.1.4.1.1588.3.1.16.1.2.1.22
.1.3.6.1.4.1.1588.3.1.16.1.2.1.23
.1.3.6.1.4.1.1588.3.1.16.1.2.1.3
.1.3.6.1.4.1.1588.3.1.16.1.2.1.4
.1.3.6.1.4.1.1588.3.1.16.1.2.1.5
.1.3.6.1.4.1.1588.3.1.16.1.2.1.6
.1.3.6.1.4.1.1588.3.1.16.1.2.1.7
.1.3.6.1.4.1.1588.3.1.16.1.2.1.8
.1.3.6.1.4.1.1588.3.1.16.1.2.1.9
.1.3.6.1.4.1.1588.3.1.16.1.3
.1.3.6.1.4.1.1588.3.1.16.1.3.1
.1.3.6.1.4.1.1588.3.1.16.1.3.1.1
.1.3.6.1.4.1.1588.3.1.16.1.3.1.2
.1.3.6.1.4.1.1588.3.1.16.2
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. Brocade-REG-MIBbrocade
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. BROCADE-ACL-MIBbrocadeselected
Type Definitions (10)
Enumeration
deny(1)
permit(2)
hardDrop(3)
Enumeration
l2(1)
ipv4(2)
ipv6(3)
Enumeration
standard(1)
any(2)
host(3)
OctetString range: 0..255
Enumeration
standard(1)
extended(2)
Enumeration
zero(0)
one(1)
two(2)
Enumeration
level1(1)
level2(2)
level3(3)
level4(4)
level5(5)
level6(6)
level7(7)
level0(8)
invalid(127)
Enumeration
inbound(1)
outbound(2)
Unsigned32 range: 0..4090
Enumeration
singleTagged(1)
doubleTagged(2)
untagged(3)