BRCMROBOMGMT5324MIB Table View

Basic information for each port.

portEntry row .1.3.6.1.4.1.655.9.22.1.2.1.1

Port information entry.

Indexes

portIndex

Column	Syntax	OID
portIndexmandatory port number, This is defined as ifIndex in the IF-MIB.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.655.9.22.1.2.1.1.1
portNamemandatory Name of each port.	OctetStringr/w Constraints: range: 0-12	.1.3.6.1.4.1.655.9.22.1.2.1.1.2
portTypemandatory The type of each port.	Enumeration Enumerated Values: 1 other 2 s100tx 3 s100fx 4 s1000tx 5 s1000fx	.1.3.6.1.4.1.655.9.22.1.2.1.1.3
portLinkmandatory This object indicates the link status of each port is up or down.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.655.9.22.1.2.1.1.4
portEnablemandatory Enable/disable status of the port, default = enable(1).	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.655.9.22.1.2.1.1.5
portAdminModemandatory To Control the speed & duplex mode for 10/100Mb ports, default = AutoNegotiation (1) (1) AutoNegotiation : detect by AN (i.e. AN enable) if link partner do not support AN, the port is force to half duplex mode. …	Enumerationr/w Enumerated Values: 1 autonegotiation 2 s10mhalf 3 s10mfull 4 s100mhalf 5 s100mfull 6 s1000mhalf 7 s1000mfull	.1.3.6.1.4.1.655.9.22.1.2.1.1.6
portSpeedDpxStatusmandatory The operating speed and duplex mode of the switched port.	Enumeration Enumerated Values: 1 error 2 halfDuplex10 3 fullDuplex10 4 halfDuplex100 5 fullDuplex100 6 halfDuplex1000 7 fullDuplex1000	.1.3.6.1.4.1.655.9.22.1.2.1.1.7
portFlowControlConfigurationmandatory Flow control configuration,	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.655.9.22.1.2.1.1.8
portFlowCtrlStatusmandatory (1) Flow control mechanism is disabled. (2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used.	Enumeration Enumerated Values: 1 none 2 backpressure 3 dot3xflowcontrol	.1.3.6.1.4.1.655.9.22.1.2.1.1.9
portTrunkIDmandatory The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to trunk at trunkIndex, defined by the corresponding trunkPort…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.655.9.22.1.2.1.1.10

This table contains addressing information relevant
to this interface corresponding to IfEntry table.
The number of entries is given by the value of ifNumber.

netConfigEntry row .1.3.6.1.4.1.655.9.22.1.2.2.1

Indexes

netConfigIndex

Column	Syntax	OID
netConfigIndexmandatory This index value uniquely identifies the interface to which this entry is applicable. This is defined as ifIndex in the IF-MIB.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.655.9.22.1.2.2.1.1
netConfigOperationmandatory This object indicates the operational status of this device.	Enumeration Enumerated Values: 1 ok 2 failure	.1.3.6.1.4.1.655.9.22.1.2.2.1.2
netConfigMacAddrmandatory The MAC address of the specified interface of the device.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.655.9.22.1.2.2.1.3
netConfigIpAddrmandatory The Internet address of the specified interface of the device.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.655.9.22.1.2.2.1.4
netConfigSNetMaskmandatory The internet address subnet mask of the specified interface of the device.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.655.9.22.1.2.2.1.5
netConfigDfGatewaymandatory The default gateway address which the routed packets are delivered to.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.655.9.22.1.2.2.1.6

This table contains the information needed
for sending traps.

switchTrapManagerEntry row .1.3.6.1.4.1.655.9.22.1.3.2.1

Indexes

switchTrapManagerIndex

Column	Syntax	OID
switchTrapManagerIndexmandatory	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.655.9.22.1.3.2.1.1
switchTrapManagerIpAddrmandatory The Internet address of the management station which trap is sent to .	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.655.9.22.1.3.2.1.2
switchTrapManagerCommmandatory Community name used for sending the trap to this management station	OctetStringr/w Constraints: range: 1-16	.1.3.6.1.4.1.655.9.22.1.3.2.1.3

Address table for each port.

addrPortEntry row .1.3.6.1.4.1.655.9.22.1.4.1.1.1

Address table entry for each port.

Indexes

addrPortIndex

Column	Syntax	OID
addrPortIndexmandatory Port index. This is defined as ifIndex in the IF-MIB.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.655.9.22.1.4.1.1.1.1
addrPortLastSrcAddressmandatory The object is the last source address in this port	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.655.9.22.1.4.1.1.1.2

The table contain information about static entry in the device.

addrStaticEntry row .1.3.6.1.4.1.655.9.22.1.4.2.8.1

Indexes

addrStaticIndex

Column	Syntax	OID
addrStaticIndexmandatory This index value uniquely identifies the address in static table. Value range between 1 and the value of addrStaticMaxAddrNumber.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.655.9.22.1.4.2.8.1.1
addrStaticSetAddressmandatory To set/modify the static address. If the two entries are occupied by the other static addresses, the set is fail	OctetStringr/w	.1.3.6.1.4.1.655.9.22.1.4.2.8.1.2

The MAC security configuration.

portMacSecurityEntry row .1.3.6.1.4.1.655.9.22.1.4.3.1

The Static Mac number and Mac Security mode of each port.

Indexes

portMacIndex

Column	Syntax	OID
portMacIndexmandatory This is defined as ifIndex in the IF-MIB.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.655.9.22.1.4.3.1.1
portStaticMacNomandatory The static mac number of port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.655.9.22.1.4.3.1.2

The table contain information about dynamic entry in the device.

addrDynamicEntry row .1.3.6.1.4.1.655.9.22.1.4.4.1

Indexes

addrDynamicIndex

Column	Syntax	OID
addrDynamicIndexmandatory This index value uniquely identifies the address in dynamic arl table. Value range between 1 and MaxDynamicIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.655.9.22.1.4.4.1.1
addrDynamicSetAddressmandatory To show the dynamic address. Format: MAC(6 bytes)+Portid(4 bytes)+VID(2 bytes).	OctetString	.1.3.6.1.4.1.655.9.22.1.4.4.1.2

A table that contains information about every
port that is associated with this transparent
bridge.

statisticPortEntry row .1.3.6.1.4.1.655.9.22.1.5.2.1

A list of information for each port of a
transparent bridge.

Indexes

statisticPort

Column	Syntax	OID
statisticPortmandatory This is defined as ifIndex in the IF-MIB.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.655.9.22.1.5.2.1.1
statisticPortSymbolErrorCountsmandatory The number of times a packet contained symbol error	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.655.9.22.1.5.2.1.2
statisticPortReceiveExcessSizeDiscardsmandatory The number of frame that are greater than 1536 bytes	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.655.9.22.1.5.2.1.3
statisticPortTransmtInDiscardsmandatory The number of frame which are discarded due to lack of space on an output queue.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.655.9.22.1.5.2.1.4
statisticPortTransmitPauseControlFrameCountsmandatory The counter of PAUSE control packets transmitted by a port	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.655.9.22.1.5.2.1.5
statisticPortReceivePauseControlFrameCountsmandatory The counter of PAUSE control packets received by a port	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.655.9.22.1.5.2.1.6

The authentication mode of port in 802.1x.

portModeEntry row .1.3.6.1.4.1.655.9.22.1.7.14.1

For 802.1p frame, mapping the 802.1p pri[2:0] (priority tag)
to the priority queue of the system.

Indexes

portDot1xIndex

Column	Syntax	OID
portDot1xIndexmandatory This is defined as ifIndex in the IF-MIB.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.655.9.22.1.7.14.1.1

The table contain information for Port Trunking function.

portTrunkEntry row .1.3.6.1.4.1.655.9.22.1.8.1.4.1

Table entry of port Trunk.

Indexes

portTrunkIndex

Column	Syntax	OID
portTrunkIndexmandatory Value range between 1 and the value of portTrunkMaxGroupCount	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.655.9.22.1.8.1.4.1.1
portTrunkGetmandatory Get Port map in the specific trunk	PortList	.1.3.6.1.4.1.655.9.22.1.8.1.4.1.2
portTrunkGroupDestorymandatory A state to present whether the Port Trunk group is ON or OFF in the device. The default value is OFF.	Enumerationr/w Enumerated Values: 1 nodestory 2 destory	.1.3.6.1.4.1.655.9.22.1.8.1.4.1.3
portTrunkPortAddmandatory Add ports to the specific Truck group.	PortListr/w	.1.3.6.1.4.1.655.9.22.1.8.1.4.1.4
portTrunkPortRemovemandatory Remove ports from the specific Truck group.	PortListr/w	.1.3.6.1.4.1.655.9.22.1.8.1.4.1.5

A table that contains information about link
delay switch of each port.

spanningTreeLinkEntry row .1.3.6.1.4.1.655.9.22.1.9.2.1

A list of information for delay switch of each port.

Indexes

spanningTreeLinkIndex

Column	Syntax	OID
spanningTreeLinkIndexmandatory The index of the port number for which this entry contains link delay switch information of each port. This is defined as ifIndex in the IF-MIB.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.655.9.22.1.9.2.1.1
spanningTreeLinkDelaySwitchmandatory A switch to select whether the spanning tree will do the link delay or not. The default is ON.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.655.9.22.1.9.2.1.2

Port Priority information for each port.

portPriorityEntry row .1.3.6.1.4.1.655.9.22.1.10.2.1

Port priority information entry.

Indexes

portPriorityIndex

Column	Syntax	OID
portPriorityIndexmandatory This is defined as ifIndex in the IF-MIB.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.655.9.22.1.10.2.1.1
portPrioritySettingmandatory port priority setting	Enumerationr/w Enumerated Values: 1 priorityhigh 2 prioritylow	.1.3.6.1.4.1.655.9.22.1.10.2.1.2
port8021PSettingmandatory port 802.1p priority setting	Enumerationr/w Enumerated Values: 1 settingEnable 2 settingDisable	.1.3.6.1.4.1.655.9.22.1.10.2.1.3

The information for the multicast group which stored in the
multi-port table

multiPortGroupEntry row .1.3.6.1.4.1.655.9.22.1.11.2.1

multi-port information entry.

Indexes

multiPortGroupIndex

Column	Syntax	OID
multiPortGroupIndexmandatory	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.655.9.22.1.11.2.1.1
multiPortGroupMACAddressmandatory	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.655.9.22.1.11.2.1.2
multiPortGroupMembermandatory The port number belong to the multicast group	PortListr/w	.1.3.6.1.4.1.655.9.22.1.11.2.1.3

The information for Ingress Rate Control of per port.

rcIngressPortEntry row .1.3.6.1.4.1.655.9.22.1.12.2.1

Ingress Rate Control information entry.

Indexes

rcIngressPortIndex

Column	Syntax	OID
rcIngressPortIndexmandatory	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.655.9.22.1.12.2.1.1
rcIngressCountmandatory Rate = No Limit , when N=0. Rate = N*64 Kbps , when N=1~28. Rate = (N-27)*1 Mbps , when N=29~127. Rate = (N-115)*8Mb, when N=128~240. (only for gigabit port)	Integer32r/w Constraints: range: 0-240	.1.3.6.1.4.1.655.9.22.1.12.2.1.2

The information for Engress Rate Control of per port.

rcEngressPortEntry row .1.3.6.1.4.1.655.9.22.1.12.3.1

Engress Rate Control information entry.

Indexes

rcEngressPortIndex

Column	Syntax	OID
rcEngressPortIndexmandatory	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.655.9.22.1.12.3.1.1
rcEngressCountmandatory Rate = No Limit , when N=0. Rate = N*64 Kbps , when N=1~28. Rate = (N-27)*1 Mbps , when N=29~127. Rate = (N-115)*8Mb, when N=128~240. (only for gigabit port)	Integer32r/w Constraints: range: 0-240	.1.3.6.1.4.1.655.9.22.1.12.3.1.2

The information for Storm Control of each port.

scPortEntry row .1.3.6.1.4.1.655.9.22.1.13.4.1

Storm Control information entry for each port.

Indexes

scPortIndex

Column	Syntax	OID
scPortIndexmandatory	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.655.9.22.1.13.4.1.1

The table contain information for Virtual LAN function.

virtualLanEntry row .1.3.6.1.4.1.655.9.22.1.14.5.1

Table entry of port monitor.

Indexes

virtualLanIndex

Column	Syntax	OID
virtualLanIndexmandatory VLAN ID, the value range between 1 and the value of virtualLanMaxDomainCount	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.655.9.22.1.14.5.1.1
virtualLanDomainNamemandatory Domain name	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.655.9.22.1.14.5.1.2
virtualLanGetmandatory Get Port map in the specific VLAN	PortList	.1.3.6.1.4.1.655.9.22.1.14.5.1.3
virtualLanDomainDestorymandatory To reset the domain's VLAN configuration. The default VLAN can not be destory. Ports which do not belong to other VLAN are belong to the default VLAN.	Enumerationr/w Enumerated Values: 1 nodestory 2 destory	.1.3.6.1.4.1.655.9.22.1.14.5.1.4
virtualLanPortAddmandatory Add ports to the specific VLAN	PortListr/w	.1.3.6.1.4.1.655.9.22.1.14.5.1.5
virtualLanPortRemovemandatory Remove the specific ports from the given VLAN	PortListr/w	.1.3.6.1.4.1.655.9.22.1.14.5.1.6