BRCM-CM-ENGINEERING-MIB Table View

A list of tuner coeffiencents to be used when calculating downstream 
power for this device.

cmDsCalTunerCoefEntry row .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.3.1

An entry defining a tuner coefficient for a given frequency at the
given index for this device.

Indexes

BRCM-CM-FACTORY-MIBcmDsCalOffsetIndex cmDsCalTunerCoefIndex

Column	Syntax	OID
cmDsCalTunerCoefIndex Identifies the instance of this tuner coefficient.	Integer32 Constraints: range: 1-128	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.3.1.1
cmDsCalTunerCoefFrequency The downstream frequency at which this instance of cmDsCalTunerCoefValue applies. This read-only object is provided here for convenience. Value is identical to the value of the read-write object cmDsCalOffsetFrequenc…	hertzSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.3.1.2
cmDsCalTunerCoefValue The value of this tuner coefficient multiplied by one million. For example, a tuner coefficient value of 0.218369 would be represented as 218369. This gives a Since tuner coefficients must range in value between zero …	millionthUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.3.1.3
cmDsCalTunerCoefCopyFrom Setting this object to the value of the first element of an index of a row in this table will cause all coefficients for this frequency to be copied from the corresponding location in the frequency pointed to by the in…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.3.1.4

A list of intermediate frequency coeffiencents to be used when 
calculating downstream power for this device.

cmDsCalIFCoefEntry row .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.6.1

An entry defining an IF coefficient for a given frequency at the
given index for this device.

Indexes

BRCM-CM-FACTORY-MIBcmDsCalOffsetIndex cmDsCalIFCoefIndex

Column	Syntax	OID
cmDsCalIFCoefIndex Identifies the instance of this IF coefficient.	Integer32 Constraints: range: 1-128	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.6.1.1
cmDsCalIFCoefFrequency The downstream frequency at which this instance of cmDsCalIFCoefValue applies. This read-only object is provided here for convenience. Value is identical to the value of the read-write object cmDsCalOffsetFrequency w…	hertzSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.6.1.2
cmDsCalIFCoefValue The value of this IF coefficient multiplied by one hundred thousand. For example, an IF coefficent value of -2662.94 would be represented as -266294000. This gives an effective range of IF coefficent values ranging fro…	hundred-thousandthSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.6.1.3
cmDsCalIFCoefCopyFrom Setting this object to the value of the first element of an index of a row in this table will cause all coefficients for this frequency to be copied from the corresponding location in the frequency pointed to by the in…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.6.1.4

A list of Fine coeffiencents to be used when calculating downstream 
power for this device.

cmDsCalFineCoefEntry row .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.9.1

An entry defining a Fine coefficient for a given frequency at the
given index for this device.

Indexes

BRCM-CM-FACTORY-MIBcmDsCalOffsetIndex cmDsCalFineCoefIndex

Column	Syntax	OID
cmDsCalFineCoefIndex Identifies the instance of this Fine coefficient.	Integer32 Constraints: range: 1-128	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.9.1.1
cmDsCalFineCoefFrequency The downstream frequency at which this instance of cmDsCalFineCoefValue applies. This read-only object is provided here for convenience. Value is identical to the value of the read-write object cmDsCalOffsetFrequency…	hertzSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.9.1.2
cmDsCalFineCoefValue The value of this fine coefficient multiplied by one million. For example, a fine coefficent value of 36.5494 would be represented as 36549400. This gives an effective range of fine coefficent values ranging from -2147…	millionthSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.9.1.3
cmDsCalFineCoefCopyFrom Setting this object to the value of the first element of an index of a row in this table will cause all coefficients for this frequency to be copied from the corresponding location in the frequency pointed to by the in…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.9.1.4

A list of equalizer coeffiencents to be used when calculating downstream 
power for this device.

cmDsCalEqCoefEntry row .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.12.1

An entry defining a equalizer coefficient for a given frequency at the
given index for this device.

Indexes

BRCM-CM-FACTORY-MIBcmDsCalOffsetIndex cmDsCalEqCoefIndex

Column	Syntax	OID
cmDsCalEqCoefIndex Identifies the instance of this equalizer coefficient.	Integer32 Constraints: range: 1-128	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.12.1.1
cmDsCalEqCoefFrequency The downstream frequency at which this instance of cmDsCalEqCoefValue applies. This read-only object is provided here for convenience. Value is identical to the value of the read-write object cmDsCalOffsetFrequency w…	hertzSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.12.1.2
cmDsCalEqCoefValue The value of this equalizer coefficient multiplied by one hundred thousand. For example, an equalizer coefficent value of 4287.95 would be represented as 428795000. This gives an effective range of equalizer coeffic…	hundred-thousandthSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.12.1.3
cmDsCalEqCoefCopyFrom Setting this object to the value of the first element of an index of a row in this table will cause all coefficients for this frequency to be copied from the corresponding location in the frequency pointed to by the in…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.12.1.4

A table used to control all tuners present on this device.

cmDsCalTunerEntry row .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.32.1

An entry used to control an individual tuner.

Indexes

cmDsCalTunerIndex

Column	Syntax	OID
cmDsCalTunerIndex Identifies the instance of this tuner.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.32.1.1
cmDsCalTunerType Identifies the type of this tuner.	Enumeration	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.32.1.2
cmDsCalTunerNumChannels Identifies the maximum number of downstream channels which may be tuned by this tuner in this application. Note that the value of this object depends on the annex mode, because in Annex A each channel is 8MHz in widt…	Integer32 Constraints: range: 1-5	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.32.1.3
cmDsCalTunerFrequency The center frequency to which this tuner will tune when cmDsCalTunerTuneNow is set to true(1). Note that a read of this object does NOT necessarily indicate that the CM is currently tuned to the indicated frequency,…	hertzInteger32r/w Constraints: range: 0-1000000000	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.32.1.4
cmDsCalTunerTuneNow When this object is set to true(1), the tuner will tune to the frequency specified by cmDsCalTunerFrequency. Sets to false(2) will be rejected with an inconsistentValue error. taken. When read, this object returns tru…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.32.1.5

A table which allows control over each individual downstream phy 
block present on the device.

cmDsCalPhyEntry row .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1

An entry allowing control over an individual downstream phy block.

Indexes

cmDsCalPhyIndex

Column	Syntax	OID
cmDsCalPhyIndex Identifies the instance of this phy block.	Integer32 Constraints: range: 1-12	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.1
cmDsCalPhyTuner Controls which tuner from the cmDsCalTunerTable this phy is mapped to.	Integer32r/w Constraints: range: 1-8	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.2
cmDsCalPhyTunerChannel Controls which channel of the tuner identified by cmDsCalPhyTuner is mapped to this phy. Values are defined as offsets from the center channel of the tuner, which is represented by a value of 0 for this object. Note…	Integer32r/w Constraints: range: -8-8	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.3
cmDsCalPhyModulation The modulation type that the CM will attempt to lock under when cmDsCalPhyLockNow is set to true. Note that a read of this object does NOT necessarily indicate that the CM is currently locked under the indicated modul…	Enumerationr/w	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.4
cmDsCalPhyLockNow When this object is set to true(1), the CM will attempt to lock the downstream phy according to the parameters specified by the values of cmDsCalTunerCenterFrequency, cmDsCalPhyTuner, cmDsCalPhyTunerChannel, and cmDsCa…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.5
cmDsCalPhyQamLocked Indicates whether the last set of cmDsCalPhyLockNow to true resulted in the phy acheiving QAM lock. The value of this object is reset whenever cmDsCalPhyLockNow is set to true, and its value will always indicate the…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.6
cmDsCalPhyFecLocked Indicates whether the last set of cmDsCalPhyLockNow to true resulted in the phy acheiving FEC lock. The value of this object is reset whenever cmDsCalPhyLockNow is set to true, and its value will always indicate the…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.7
cmDsCalPhySignalNoise Signal/Noise ratio as perceived for this phy.	TenthdBDOCS-IF-MIBTenthdB	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.8
cmDsCalPhyPower The received power level for this phy.	dBmVDOCS-IF-MIBTenthdBmV	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.9
cmDsCalPhyFrequency Reports the frequency to which this phy is locked. The value of this object will reflect the frequency as calculated according to the settings of cmDsCalPhyTuner and cmDsCalPhyTuner, and does not include the frequenc…	hertzSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.10
cmDsCalPhyFrequencyError Reports the frequency error for this phy. The actual frequency to which the phy is locked will be the sum of the value of this object and cmDsCalPhyFrequency. If cmDsCalPhyLockNow has not been set to true(1) then th…	hertzSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.11
cmDsCalPhySymbolRate Reports the downstream symbol rate for this phy. If cmDsCalPhyLockNow has not been set to true(1) then this object will report a value of 0.	symbols per secondSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.12

A list of control values to be used when calculating upstream 
power for this device.

cmUsCalControlEntry row .1.3.6.1.4.1.4413.2.99.1.1.3.2.3.5.1

An entry defining the control values for a given power at the given
index for this device.

Indexes

cmUsCalControlIndex

Column	Syntax	OID
cmUsCalControlIndex Identifies the instance of this pair of control values.	Integer32 Constraints: range: 1-128	.1.3.6.1.4.1.4413.2.99.1.1.3.2.3.5.1.1
cmUsCalControlPower Indicates the upstream power level which is expected when the amp gain and DAC attenuation are programmed as indicated in this entry. This value is read-only, its value depends on the values set in cmUsCalControlStartP…	hundredth dBmVInteger32 Constraints: range: 0-255	.1.3.6.1.4.1.4413.2.99.1.1.3.2.3.5.1.2
cmUsCalControlAmpGain Controls and reflects the amplifier gain setting used to produce an output power equal to the value of this entry's instance of cmUsCalControlPower.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.4413.2.99.1.1.3.2.3.5.1.3
cmUsCalControlDacAtten Controls and reflects the DAC attenuation setting used to produce an output power equal to the value of this entry's instance of cmUsCalControlPower.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.4413.2.99.1.1.3.2.3.5.1.4