BRCM-BATTERY-MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
30

batteryTable

table
.1.3.6.1.4.1.4413.2.2.2.1.10.1.1 · 1 row entry · 26 columns
Open in standard view
Uses the broadcom variant from /opt/observium/mibs/broadcom.
Command help
Walk batteryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BRCM-BATTERY-MGMT-MIB' -M '/opt/observium/mibs/broadcom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BRCM-BATTERY-MGMT-MIB::batteryTable' 
A table of batteries present on the system.
batteryEntry row .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1
An entry describing the characteristics of an individual battery.
Indexes
Column Syntax OID
battIndex
Identifies the instance number of this individual battery.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.1
battCapacity
The charge capacity of this battery.
milliamp hoursSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.2
battMaximumVoltage
The voltage at which this battery is considered to be fully charged.
Note that if battChargerMaximumCharge is set to less than 100%, the
battery will never be charged to this voltage.
millivoltsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.3
battMinimumVoltage
The voltage at which this battery is considered to be fully
discharged.
millivoltsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.4
battMeasuredVoltage
The most recently measured voltage of this battery.
millivoltsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.5
battIsValid
Indicates whether this battery is considered valid by the battery
charger. A value of false(2) here indicates some kind of failure
with this battery.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.6
battIsSelected
Indicates whether this battery is currently selected for charging or
discharging.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.7
battEstimatedMinutesRemaining
An estimate of the time to depletion of this battery's charge
under the present load conditions if the utility power
is off and remains off, or if it were to be lost and
remain off.
minutesUPS-MIBPositiveInteger
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.8
battEstimatedChargeRemaining
An estimate of this battery's charge remaining expressed
as a percent of full charge.
percentInteger32
Constraints:
range: 0-100
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.9
battErrors
Indicates the number of errors reported by the charger when trying
to charge this battery. This object should always have a value of
zero if all is well with the charger and the battery.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.10
battEpromRevision
The version of the battery EPROM.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.11
battPackSupplier
Battery Pack Supplier
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.12
battModelNumber
Battery Model Number.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.13
battSerialNumber
Battery Serial Number.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.14
battCellSupplier
Battery Cell Supplier.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.15
battCellCapacity
Battery Cell Capacity.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.16
battCellDateCode
Battery Cell Date Code(mmddyy).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.17
battPackDateCode
Battery Pack Date Code(mmddyy).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.18
battTemperature
The temperature as reported by this battery. If the battery pack does
not support temperature measurement then this object will not be
supported.
degrees CentigradeSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.19
battPackGUID
The battery pack globally unique ID (0x<cc><iiiiiiii><ff>).
Where <cc> is an 8-bit CRC, <iiiiiiii> is the 48-bit ID, and <ff> is
the 8-bit family code. If the hardware does not support reading
the GUID then this object…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.20
battActualCapacity
The current maximum charge capacity of this battery. If the hardware
does not support periodic life testing, this will return the same
value as battDesignCapacity
milliamp hoursSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.21
battAge
Specifies the current age of the battery as a percentage of its design
capacity. This value could be calculated by dividing battActualCapacity
by battDesignCapacity (however, this value clips at 100%.)
percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.22
battNextLifeTest
Returns/specifies the date and time of the next life test (mmddyyyy hh:mm:ss)
for the specified pack. If the charger does not support periodic life
testing then this object will not be supported. Setting this object t…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.23
battDischargeTable
Returns the full discharge table for the specified battery as a comma-delimited string
OctetString .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.24
battCompressedDischargeTable
Returns the compressed discharge table from the specified battery
OctetString .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.25
battInvalidateNonVolSlot
Invalidates the specified non-vol slot
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.26

batteryThermalSensorTable

table
.1.3.6.1.4.1.4413.2.2.2.1.10.5.1 · 1 row entry · 4 columns
Open in standard view
Uses the broadcom variant from /opt/observium/mibs/broadcom.
Command help
Walk batteryThermalSensorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BRCM-BATTERY-MGMT-MIB' -M '/opt/observium/mibs/broadcom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BRCM-BATTERY-MGMT-MIB::batteryThermalSensorTable' 
A table of thermal sensors present on the system.
batteryThermalSensorEntry row .1.3.6.1.4.1.4413.2.2.2.1.10.5.1.1
An entry describing a single thermal sensor.
Indexes
Column Syntax OID
battThermalSensorType
Identifies the type of this thermal sensor.
Enumeration
Enumerated Values:
1batteryPackSensor
2boardLevelTemperatureSensor
3thermalShutdownControllerSensor
 .1.3.6.1.4.1.4413.2.2.2.1.10.5.1.1.1
battThermalSensorIndex
Identifies the instance number of this thermal sensor.
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.4413.2.2.2.1.10.5.1.1.2
battThermalSensorDescription
A textual description of this thermal sensor.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4413.2.2.2.1.10.5.1.1.3
battThermalSensorTemperature
The temperature as reported by this thermal sensor.
degrees CentigradeSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4413.2.2.2.1.10.5.1.1.4