BLADETYPE5-NETWORK-MIB Table View

The table of port configuration in the current_configuration block.

agPortCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1

A row in the port table in the current_configuration block.

Indexes

agPortCurCfgIndx

Column	Syntax	OID
agPortCurCfgIndx The index of the row in port configurations table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.1
agPortCurCfgState This is the state of the port.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.2
agPortCurCfgVlanTag This is VLAN tag state of the port	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.3
agPortCurCfgRmon This object is used to turn RMON on or off on the port.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.5
agPortCurCfgPVID The default VLAN ID for the port.	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.6
agPortCurCfgGigEthAutoNeg This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.11
agPortCurCfgGigEthSpeed Selects the port speed for gigabit Ethernet connection.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.12
agPortCurCfgGigEthMode This object is used to select port mode for gigabit Ethernet connection.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.13
agPortCurCfgGigEthFctl This object is used to select port flow control for gigabit Ethernet connection.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.14
agPortCurCfgPortName The switch port name.	OctetString Constraints: range: 0-65	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.15
agPortCurCfgLinkTrap Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface…	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.18
agPortCurCfgTagPVID This is PVID tag state of the port	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.19
agPortCurCfgMulticastThreshold Current status of the port's Multicast Threshold.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.20
agPortCurCfgMulticastThresholdRate Current port's Multicast Threshold Rate.	Integer32 Constraints: range: 0-262143	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.21
agPortCurCfgBroadcastThreshold Current status of the port's Broadcast Threshold.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.22
agPortCurCfgBroadcastThresholdRate Current port's Broadcast Threshold Rate.	Integer32 Constraints: range: 0-262143	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.23
agPortCurCfgDLFThreshold Current status of the port's Destination Lookup Fail Threshold.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.24
agPortCurCfgDLFThresholdRate Current port's Destination Lookup Fail Threshold Rate.	Integer32 Constraints: range: 0-262143	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.25
agPortCurCfgType The switch port type.	OctetString Constraints: range: 0-65	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.28

The table of port configuration in the new_configuration block.

agPortNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1

A row in the port configuration table in the new_configuration block.

Indexes

agPortNewCfgIndx

Column	Syntax	OID
agPortNewCfgIndx The index of the row in port configurations table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.1
agPortNewCfgState This is the state of the port.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.2
agPortNewCfgVlanTag This is VLAN tag state of the port	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.3
agPortNewCfgRmon This object is used to turn RMON on or off on the port.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.5
agPortNewCfgPVID The default VLAN ID for the port.	Integer32r/w Constraints: range: 1-4095	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.6
agPortNewCfgGigEthAutoNeg This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.11
agPortNewCfgGigEthSpeed Selects the port speed for gigabit Ethernet connection.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.12
agPortNewCfgGigEthMode This object is used to select port mode for gigabit Ethernet connection.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.13
agPortNewCfgGigEthFctl This object is used to select port flow control for gigabit Ethernet connection.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.14
agPortNewCfgPortName The switch port name.	OctetStringr/w Constraints: range: 0-65	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.15
agPortNewCfgLinkTrap Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface…	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.18
agPortNewCfgTagPVID This is PVID tag state of the port	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.19
agPortNewCfgMulticastThreshold New status of the port's Multicast Threshold.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.20
agPortNewCfgMulticastThresholdRate New port's Multicast Threshold Rate.	Integer32r/w Constraints: range: 0-262143	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.21
agPortNewCfgBroadcastThreshold New status of the port's Broadcast Threshold.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.22
agPortNewCfgBroadcastThresholdRate New port's Broadcast Threshold Rate.	Integer32r/w Constraints: range: 0-262143	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.23
agPortNewCfgDLFThreshold New status of the port's Destination Lookup Fail Threshold.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.24
agPortNewCfgDLFThresholdRate New port's Destination Lookup Fail Threshold Rate.	Integer32r/w Constraints: range: 0-262143	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.25
agPortNewCfgType The switch port type.	OctetString Constraints: range: 0-65	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.28

The table of syslog messages.

agSyslogMsgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.11.1

A syslog message stored on the switch.

Indexes

agSyslogMsgIndex

Column	Syntax	OID
agSyslogMsgIndex The syslog message table index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.11.1.1
agSyslogMessage The syslog message.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.11.1.2

The table of URL path for URL load balancing in the current_config.

agApplyTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8.5.1

Information about an URL path for URL load balancing.

Indexes

agApplyIndex

Column	Syntax	OID
agApplyIndex The table index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8.5.1.1
agApplyString A string in the apply table.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8.5.1.2

The table of tacacs+ user map current configuration.

agTacacsUserMapCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.31.1

A row in the tacacs+ user mapping table.

Indexes

agTacacsUserMapCurCfgUId

Column	Syntax	OID
agTacacsUserMapCurCfgUId The current config remote privilege identifier.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.31.1.1
agTacacsUserMapCurCfgMapping Current Tacacs+ user privilege mappings.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.31.1.2

The table of tacacs+ user map new configuration.

agTacacsUserMapNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.32.1

A row in the tacacs+ user mapping table.

Indexes

agTacacsUserMapNewCfgUId

Column	Syntax	OID
agTacacsUserMapNewCfgUId The new config remote privilege identifier.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.32.1.1
agTacacsUserMapNewCfgMapping Set new Tacacs+ user privilege mappings.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.32.1.2

The table for Management Network definitions
in the current configuration block.

agCurCfgMgmtNetEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.2.1

A row in the management network definition table.

Indexes

agCurCfgMgmtNetIndex

Column	Syntax	OID
agCurCfgMgmtNetIndex The index of the Management Network Definition table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.2.1.1
agCurCfgMgmtNetSubnet The Management Network Address in the current_configuration block.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.2.1.2
agCurCfgMgmtNetMask The Management Network Mask in the current_configuration block.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.2.1.3

The table for Management Network definitions
in the new configuration block.

agNewCfgMgmtNetEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.3.1

A row in the management network definition table.

Indexes

agNewCfgMgmtNetIndex

Column	Syntax	OID
agNewCfgMgmtNetIndex The index of the Management Network Definition table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.3.1.1
agNewCfgMgmtNetSubnet The Management Network Address in the new_configuration block.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.3.1.2
agNewCfgMgmtNetMask The Management Network Mask in the new_configuration block.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.3.1.3
agNewCfgMgmtNetDelete By setting the value to delete(2), the entire row is deleted.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.3.1.4

The table of Access user configuration.

agAccessUserCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2.1

A row in the Access user configuration table.

Indexes

agAccessUserCurCfgUId

Column	Syntax	OID
agAccessUserCurCfgUId The User identifier.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2.1.1
agAccessUserCurCos The user class of service.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2.1.2
agAccessUserCurCfgName The user name.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2.1.3
agAccessUserCurCfgPswd The character string representing the user passworde.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2.1.4
agAccessUserCurCfgState Enable or disable a user.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2.1.5

The table of Access user configuration.

agAccessUserNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1

A row in the Access user configuration table.

Indexes

agAccessUserNewCfgUId

Column	Syntax	OID
agAccessUserNewCfgUId The User identifier.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1.1
agAccessUserNewCos The user class of service.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1.2
agAccessUserNewCfgName The user name.	OctetStringr/w Constraints: range: 0-8	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1.3
agAccessUserNewCfgPswd The character string representing the user passworde.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1.4
agAccessUserNewCfgState Enable or disable a user.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1.5
agAccessUserNewCfgDelete This is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1.6

The table of port statistics.

portStatsTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1

A row in the port stats table.

Indexes

portStatsIndx

Column	Syntax	OID
portStatsIndx The port index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.1
portStatsPhyIfInOctets The total number of octets received on the interface, including framing characters.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.2
portStatsPhyIfInUcastPkts The number of subnetwork-unicast packets delivered to a higher-layer protocol.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.3
portStatsPhyIfInNUcastPkts The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.4
portStatsPhyIfInDiscards The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet co…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.5
portStatsPhyIfInErrors The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.6
portStatsPhyIfInUnknownProtos The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.7
portStatsPhyIfOutOctets The total number of octets transmitted out of the interface, including framing characters.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.8
portStatsPhyIfOutUcastPkts The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.9
portStatsPhyIfOutNUcastPkts The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.10
portStatsPhyIfOutDiscards The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer s…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.11
portStatsPhyIfOutErrors The number of outbound packets that could not be transmitted because of errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.12
portStatsPhyIfOutQLen The length of the output packet queue (in packets).	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.13
portStatsPhyIfInBroadcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.14
portStatsPhyIfOutBroadcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.15
portStatsClear Setting this value to clear(1) clears the stats for this port.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.16
portStatsPhyIfInMulticastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.17
portStatsPhyIfOutMulticastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.18

The table of 802.1x port statistics.

dot1xPortStatsTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1

A row in the 802.1x port stats table.

Indexes

dot1xPortStatsIndx

Column	Syntax	OID
dot1xPortStatsIndx The 802.1x port stats index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.1
eapolFramesRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.2
eapolFramesTx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.3
eapolStartFramesRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.4
eapolLogoffFramesRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.5
eapolRespIdFramesRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.6
eapolRespFramesRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.7
eapolReqIdFramesTx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.8
eapolReqFramesTx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.9
invalidEapolFramesRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.10
eapLengthErrorFramesRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.11
authEntersConnecting	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.12
authEapLogoffsWhileConnecting	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.13
authEntersAuthenticating	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.14
authSuccessesWhileAuthenticating	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.15
authTimeoutsWhileAuthenticating	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.16
authFailWhileAuthenticating	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.17
authReauthsWhileAuthenticating	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.18
authEapStartsWhileAuthenticating	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.19
authEapLogoffWhileAuthenticating	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.20
authReauthsWhileAuthenticated	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.21
authEapStartsWhileAuthenticated	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.22
authEapLogoffWhileAuthenticated	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.23
backendResponses	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.24
backendAccessChallenges	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.25
backendOtherRequestsToSupplicant	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.26
backendNonNakResponsesFromSupplicant	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.27
backendAuthSuccesses	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.28
backendAuthFails	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.29
lastEapolFrameVersion	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.30
lastEapolFrameSource	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.31

The table of all ports statistics.

allportsStatsTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1

A row in the table of all ports statistics.

Indexes

allportsStatsIndx

Column	Syntax	OID
allportsStatsIndx The port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.1
allportsStatsDescr The port description.	OctetString Constraints: range: 0-5	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.2
allportsStatsSpeed The current operational speed of the port.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.3
allportsStatsPhysAddress The port MAC Address.	SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.4
allportsStatsAdminStatus The port Admin state.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.5
allportsStatsOperStatus The port Operational Status.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.6
allportsStatsInOctets Octets In for port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.7
allportsStatsOutOctets Octets Out for port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.8
allportsStatsInPkts Packets In for port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.9
allportsStatsOutPkts Packets Out for port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.10
allportsStatsInUcast Unicast Packets In for port.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.11
allportsStatsOutUcast Unicast Packets Out for port.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.12
allportsStatsInBcast Broadcasts Packets In for port.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.13
allportsStatsOutBcast Broadcasts Packets Out for port.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.14
allportsStatsInMcast Multicast Packets In for port.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.15
allportsStatsOutMcast Multicast Packets Out for port.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.16
allportsStatsInDiscards Discarded Packets for port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.17
allportsStatsOutDiscards Outbound Packets for port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.18
allportsStatsInErrors Error Packets for port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.19
allportsStatsOutErrors Not sent packets due to error.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.20
allportsStatsInUnknownProtos Unknown protocol packets.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.21
allportsStatsOutQLen Outbound Packet Queue Length.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.22
allportsStatsipInReceives Ip In Receives.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.23
allportsStatsipInHeaderErrors Ip In Header Errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.24
allportsStatsipInDiscards Ip In Discards.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.25
allportsStatsLinkStateChange Number of link state changes.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.26

The table of ACL statistics.

aclStatsTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.12.1.1

Statistics about a particular ACL configuration entry.

Indexes

aclStatsIndex

Column	Syntax	OID
aclStatsIndex The acl index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.12.1.1.1
aclStatsHits Total number of hits for this ACL entry	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.12.1.1.2
aclClearStats Setting this value to clear(2) clears the stats for the ACL.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.12.1.1.3

The table of port information.

portInfoTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1

A row in the port information table.

Indexes

portInfoIndx

Column	Syntax	OID
portInfoIndx The port index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.1
portInfoSpeed The current operational speed of the port.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.2
portInfoMode The current operational mode of the port.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.3
portInfoFlowCtrl The current operational flow control of the port.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.4
portInfoLink The current operational link status of the port.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.5
portInfoPhyIfDescr A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.6
portInfoPhyIfType The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.7
portInfoPhyIfMtu The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.8
portInfoPhyIfPhysAddress The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet str…	SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.9
portInfoPhyIfOperStatus The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.10
portInfoPhyIfLastChange The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object …	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.11

The table of URL path for URL load balancing in the current_config.

agDiffTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.4.4.1

Information about an URL path for URL load balancing.

Indexes

agDiffIndex

Column	Syntax	OID
agDiffIndex The table index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.4.4.1.1
agDiffString A string in the diff table.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.4.4.1.2

The table of dump strings.

agCfgDumpTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.5.4.1

An entry in the dump table.

Indexes

agCfgDumpIndex

Column	Syntax	OID
agCfgDumpIndex The table index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.5.4.1.1
agCfgDumpString A string in the dump table.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.5.4.1.2

The table of gea port mapping.

geaportInfoTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.7.1.1

An entry in the geaport table mapping.

Indexes

geaportInfoLogicalIndex

Column	Syntax	OID
geaportInfoLogicalIndex The logical port index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.7.1.1.1
geaportInfoPort The GEA Port (0-based).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.7.1.1.2
geaportInfoUnit The GEA Unit.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.7.1.1.3

The table of LtD admin key configuration.

ufdInfoLtDAdminkeyTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.10.1

A row in the LtD admin key table.

Indexes

ufdInfoLtDAdminkey

Column	Syntax	OID
ufdInfoLtDAdminkey The LtD admin key.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.10.1.1

The table of external port SFP information.

sfpInfoTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1

A row in the external port SFP information table.

Indexes

sfpInfoIndx

Column	Syntax	OID
sfpInfoIndx The external port SFX index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.1
sfpInfoPort External Port SFP/XFP alias.	OctetString Constraints: range: 0-6	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.2
sfpInfoDevice External Port SFP/XFP Device.	OctetString Constraints: range: 0-6	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.3
sfpInfoTXEnable External Port SFP/XFP TX-Enable.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.4
sfpInfoRXSignal External Port SFP/XFP RX-Signal.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.5
sfpInfoTXFault External Port SFP/XFP TX-Fault.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.6
sfpInfoApproved External Port SFP/XFP Approval.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.7

The table of port operations.

agPortOperTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.1.1

A row in the port operations table.

Indexes

portOperIdx

Column	Syntax	OID
portOperIdx The port index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.1.1.1
portOperState Enable/Disable port.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.1.1.2
portOperRmon Enable/Disable RMON for port.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.1.1.3

The table of port operations.

portOperDot1xTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.3.1

A row in the port 802.1x operation table.

Indexes

portOperDot1xIndx

Column	Syntax	OID
portOperDot1xIndx The port index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.3.1.1
portOperDot1xReset Reinitialize 802.1x access control on port.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.3.1.2
portOperDot1xReauth Initiate reauthentication on port.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.3.1.3

The table of VLAN configuration.

vlanCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2.1

A row in the VLAN configuration table.

Indexes

vlanCurCfgVlanId

Column	Syntax	OID
vlanCurCfgVlanId The VLAN identifier.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2.1.1
vlanCurCfgVlanName The VLAN name.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2.1.2
vlanCurCfgPorts The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 …	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2.1.3
vlanCurCfgState Enable or disable a VLAN	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2.1.4
vlanCurCfgStg The Spanning Tree Group for the VLAN.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2.1.6

The table of VLAN configuration.

vlanNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1

A row in the VLAN configuration table.

Indexes

vlanNewCfgVlanId

Column	Syntax	OID
vlanNewCfgVlanId The VLAN identifier.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.1
vlanNewCfgVlanName The VLAN name.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.2
vlanNewCfgPorts The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ po…	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.3
vlanNewCfgState Enable or disable a VLAN	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.4
vlanNewCfgAddPort The port to be added to the specified VLAN. A '0' value is returned when read.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.5
vlanNewCfgRemovePort The port to be removed from the specified VLAN. A '0' value is returned when read.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.6
vlanNewCfgDelete This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.7
vlanNewCfgStg The Spanning Tree Group for the VLAN.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.9

The table of trunk group configuration.

trunkGroupCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.2.1

A row in the trunk group configuration table.

Indexes

trunkGroupCurCfgIndex

Column	Syntax	OID
trunkGroupCurCfgIndex The identifier of the trunk group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.2.1.1
trunkGroupCurCfgPorts The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || ||…	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.2.1.2
trunkGroupCurCfgState Enable or disable a trunk group.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.2.1.3

The table of trunk group configuration.

trunkGroupNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1

A row in the trunk group configuration table.

Indexes

trunkGroupNewCfgIndex

Column	Syntax	OID
trunkGroupNewCfgIndex The identifier of the trunk group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1.1
trunkGroupNewCfgPorts The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || ||…	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1.2
trunkGroupNewCfgAddPort The port to be added in the trunk group. When read, 0 is returned.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1.3
trunkGroupNewCfgRemovePort The port to be deleted from the trunk group. when read, 0 is returned.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1.4
trunkGroupNewCfgState Enable or disable a trunk group.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1.5
trunkGroupNewCfgDelete Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1.6

The table of Spanning Tree Group configuration.

stgCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1

Information about a particular Spanning Tree Group configuration.

Indexes

stgCurCfgIndex

Column	Syntax	OID
stgCurCfgIndex The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.1
stgCurCfgState Turn on of off Spanning Tree operation of a particular Spanning Tree Group.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.2
stgCurCfgPriority The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.5
stgCurCfgBrgHelloTime The value in seconds that all bridges use for HelloTime when this bridge is acting as the root.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.6
stgCurCfgBrgForwardDelay The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.	Integer32 Constraints: range: 4-30	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.7
stgCurCfgBrgMaxAge The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.	Integer32 Constraints: range: 6-40	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.8
stgCurCfgVlanBmap The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4095. in receiving order: OCTET 1 OCTET 2 .....…	OctetString Constraints: range: 0-512	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.10

The table of Spanning Tree Groups configuration in the new_config.

stgNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1

Information about a particular Spanning Tree Group configuration.

Indexes

stgNewCfgIndex

Column	Syntax	OID
stgNewCfgIndex The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.1
stgNewCfgState Turn on of off Spanning Tree operation of a particular Spanning Tree Group.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.2
stgNewCfgDefaultCfg Setting the value to default-config(1) will set the default configuration as recommended by IEEE 802.1D for a particular Spanning Tree Group. default-config (1) is always returned When read, but it does not mean anyt…	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.3
stgNewCfgAddVlan The vlan to be added to the specified Spanning Tree Group. A '0' value is returned when read.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.4
stgNewCfgRemoveVlan The vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.5
stgNewCfgPriority The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.8
stgNewCfgBrgHelloTime The value in seconds that all bridges use for HelloTime when this bridge is acting as the root.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.9
stgNewCfgBrgForwardDelay The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.	Integer32r/w Constraints: range: 4-30	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.10
stgNewCfgBrgMaxAge The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.	Integer32r/w Constraints: range: 6-40	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.11
stgNewCfgVlanBmap The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4095. in receiving order: OCTET 1 OCTET 2 .....…	OctetString Constraints: range: 0-512	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.13

The table of Spanning Tree Group port configuration in the
current_config.

stgCurCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1

Information about port configuration of a particular Spanning Tree
Group.

Indexes

stgCurCfgStgIndex stgCurCfgPortIndex

Column	Syntax	OID
stgCurCfgStgIndex The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.1
stgCurCfgPortIndex The port identifier of a particular Spanning Tree Group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.2
stgCurCfgPortState Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.3
stgCurCfgPortPriority The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.4
stgCurCfgPortPathCost The contribution of this port to the path cost of paths towards the spanning tree root which include this port.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.5
stgCurCfgPortLink The type of the port link.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.6
stgCurCfgPortEdge The state of port edge.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.7
stgCurCfgPortFastFwd The state of port fast forwarding.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.8

The table of Spanning Tree Group port configuration in the
new_config.

stgNewCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1

Information about port configuration of a particular Spanning Tree
Group.

Indexes

stgNewCfgStgIndex stgNewCfgPortIndex

Column	Syntax	OID
stgNewCfgStgIndex The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.1
stgNewCfgPortIndex The port identifier of a particular Spanning Tree Group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.2
stgNewCfgPortState Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.3
stgNewCfgPortPriority The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.4
stgNewCfgPortPathCost The contribution of this port to the path cost of paths towards the spanning tree root which include this port.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.5
stgNewCfgPortLink The type of the port link.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.6
stgNewCfgPortEdge The state of port edge.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.7
stgNewCfgPortFastFwd The state of port fast forwarding.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.8

The table of monitoring ports.

pmCurCfgPortMonitorEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.3.1

A row in the monitoring port table.

Indexes

pmCurCfgPmirrMoniPortIndex pmCurCfgPmirrMirrPortIndex

Column	Syntax	OID
pmCurCfgPmirrMoniPortIndex The monitoring port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.3.1.1
pmCurCfgPmirrMirrPortIndex The mirrored port number	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.3.1.2
pmCurCfgPmirrDirection The type of traffic to be monitored with respect to the mirrored port.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.3.1.3

The table of monitoring ports.

pmNewCfgPortMonitorEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4.1

A row in the monitoring port table.

Indexes

pmNewCfgPmirrMoniPortIndex pmNewCfgPmirrMirrPortIndex

Column	Syntax	OID
pmNewCfgPmirrMoniPortIndex The monitoring port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4.1.1
pmNewCfgPmirrMirrPortIndex The mirrored port number	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4.1.2
pmNewCfgPmirrDirection The type of traffic to be monitored with respect to the mirrored port.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4.1.3
pmNewCfgPmirrDelete Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4.1.4
pmNewCfgPmonDelete Setting the value to delete(2) will delete the monitor port. When read, other(1) is returned.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4.1.10

The table of CIST Port configuration.

mstCistCurCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1

Information about a particular CIST Port configuration.

Indexes

mstCistCurCfgPortIndex

Column	Syntax	OID
mstCistCurCfgPortIndex The port number of the port for which this entry contains spanning tree configuration.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.1
mstCistCurCfgPortPriority The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.	Integer32 Constraints: range: 0-240	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.2
mstCistCurCfgPortPathCost The contribution of this port to the path cost of paths towards the CIST Root which include this port.	Integer32 Constraints: range: 0-200000000	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.3
mstCistCurCfgPortLinkType The administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shar…	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.4
mstCistCurCfgPortEdge The value of the Edge Port parameter.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.5
mstCistCurCfgPortStpState Turn port's Spanning Tree on/off.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.6
mstCistCurCfgPortHelloTime The amount of time between the transmission of Configuration Port PDUs in seconds.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.7

The table of CIST Port configuration.

mstCistNewCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1

Information about a particular CIST Port configuration.

Indexes

mstCistNewCfgPortIndex

Column	Syntax	OID
mstCistNewCfgPortIndex The port number of the port for which this entry contains spanning tree configuration.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.1
mstCistNewCfgPortPriority The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.	Integer32r/w Constraints: range: 0-240	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.2
mstCistNewCfgPortPathCost The contribution of this port to the path cost of paths towards the CIST Root which include this port.	Integer32r/w Constraints: range: 0-200000000	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.3
mstCistNewCfgPortLinkType The administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shar…	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.4
mstCistNewCfgPortEdge The value of the Edge Port parameter.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.5
mstCistNewCfgPortStpState Turn port's Spanning Tree on/off.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.6
mstCistNewCfgPortHelloTime The amount of time between the transmission of Configuration Port PDUs in seconds.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.7

The table of LACP port configuration.

lacpCurPortCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.7.1

A row in the LACP port configuration table.

Indexes

lacpCurPortCfgTableId

Column	Syntax	OID
lacpCurPortCfgTableId LACP port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.7.1.1
lacpCurPortState LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.7.1.2
lacpCurPortActorPortPriority The priority value assigned to this Aggregation Port. This 16-bit value is read-only.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.7.1.3
lacpCurPortActorAdminKey The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.7.1.4

The table of LACP port configuration.

lacpNewPortCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1

A row in the LACP port configuration table.

Indexes

lacpNewPortCfgTableId

Column	Syntax	OID
lacpNewPortCfgTableId LACP port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1.1
lacpNewPortState LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1.2
lacpNewPortActorPortPriority The priority value assigned to this Aggregation Port. This 16-bit value is read-write.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1.3
lacpNewPortActorAdminKey The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1.4

The table of LtD admin key configuration.

ufdLtDAdminkeyCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.14.1

A row in the LtD admin key table.

Indexes

ufdLtDAdminkeyCurCfg

Column	Syntax	OID
ufdLtDAdminkeyCurCfg The LtD admin key.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.14.1.1

The table of LtD admin key configuration.

ufdLtDAdminkeyNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.15.1

A row in the LtD admin key table.

Indexes

ufdLtDAdminkeyNewCfg

Column	Syntax	OID
ufdLtDAdminkeyNewCfg The LtD admin key.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.15.1.1

The table of 8021x configuration in the Current_config.

dot1xCurCfgPortEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1

Information about 8021x Port Config

Indexes

dot1xCurCfgPortIndex

Column	Syntax	OID
dot1xCurCfgPortIndex The 8021x Port number for which the table is related.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.1
dot1xCurCfgPortMode Port authenticaton mode forceUnauth(0), auto(1), forceAuth(2)	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.2
dot1xCurCfgPortQtPeriod Quiet period (0-65535)	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.3
dot1xCurCfgPortTxPeriod Tx Period	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.4
dot1xCurCfgPortSupTmout Supplicant timeout (1..65535)	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.5
dot1xCurCfgPortSrvTmout Server timeout (1..65535)	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.6
dot1xCurCfgPortMaxRq Maximum numer of requests (1..10)	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.7
dot1xCurCfgPortRaPeriod Reautentication period (0..604800)	Integer32 Constraints: range: 0-604800	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.8
dot1xCurCfgPortReAuth ReAuthentication state off(0), on(1)	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.9

The table of 8021x configuration in the new_config.

dot1xNewCfgPortEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1

Information about 8021x Port Config

Indexes

dot1xNewCfgPortIndex

Column	Syntax	OID
dot1xNewCfgPortIndex The 8021x Port number for which the table is related.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.1
dot1xNewCfgPortMode Port authentication mode forceUnauth(0), auto(1), forceAuth(2)	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.2
dot1xNewCfgPortQtPeriod Quiet period (0..65535)	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.3
dot1xNewCfgPortTxPeriod Tx Period (1..65535)	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.4
dot1xNewCfgPortSupTmout Supplicant Timeout (1..65535)	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.5
dot1xNewCfgPortSrvTmout Server Timeout (1..65535)	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.6
dot1xNewCfgPortMaxRq Maximum number of requests (1..10)	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.7
dot1xNewCfgPortRaPeriod Reauthentication period (1..604800)	Integer32r/w Constraints: range: 1-604800	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.8
dot1xNewCfgPortReAuth Reauthentication state off(0), on(1)	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.9
dot1xNewCfgPortDefault Port default settings	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.10
dot1xNewCfgPortApplyGlobal Apply Global config	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.11

The table of FDB static entries.

fdbNewCfgStaticEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2.1

A row in the fdb table.

Indexes

fdbNewCfgEntryIndex

Column	Syntax	OID
fdbNewCfgEntryIndex The fdb entry index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2.1.1
fdbNewCfgAddVlan Add vlan for fdb entry index	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2.1.2
fdbNewCfgAddPort The MAC address port number.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2.1.3
fdbNewCfgAddMac Add a fdb entry.	SNMPv2-TCPhysAddressr/w Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2.1.4
fdbNewCfgDelStaticEntry When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2.1.5

The table of FDB static entries.

fdbCurCfgStaticEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.3.1

A row in the fdb table.

Indexes

fdbCurCfgEntryIndex

Column	Syntax	OID
fdbCurCfgEntryIndex The fdb entry index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.3.1.1
fdbCurCfgVlan Add vlan for fdb entry index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.3.1.2
fdbCurCfgPort The MAC address port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.3.1.3
fdbCurCfgMac Add a fdb entry.	SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.3.1.4

The table of Spanning Tree Group port statistics.

stgStatsPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1

Statistics about port of a particular Spanning Tree Group.

Indexes

stgStatsStpIndex stgStatsPortIndex

Column	Syntax	OID
stgStatsStpIndex The identifier of a particular Spanning Tree Group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1.1
stgStatsPortIndex The port identifier of a particular Spanning Tree Group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1.2
stgStatsPortRcvCfgBpdus Number of Configuration BPDU's received on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1.3
stgStatsPortRcvTcnBpdus Number of TCN BPDU's received on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1.4
stgStatsPortXmtCfgBpdus Number of Configuration BPDU's trasmitted from the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1.5
stgStatsPortXmtTcnBpdus Number of TCN BPDU's trasmitted from the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1.6

The table of LACP Stats.

lacpStatsTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1

Lacp status info.

Indexes

lacpStatsIndex

Column	Syntax	OID
lacpStatsIndex Index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.1
lacpdusRx Valid LACPDUs received	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.2
markerpdusRx Valid Marker PDUs received	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.3
markerresponsepdusRx Valid Marker Rsp PDUs received	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.4
unknownRx Unknown version/TLV type	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.5
illegalRx Illegal subtype received	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.6
lacpdusTx LACPDUs transmitted	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.7
markerpdusTx Market PDUs transmitted	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.8
markerresponsepdusTx Marker Rsp PDUs transmitted	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.9
lacpClearStats Setting this to clear(2) results in clearing the LACP statistics.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.10