BLADETYPE2-PHYSICAL-MIB Table View

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.2.1.1

vlanCurCfgVlanName

The VLAN name.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.2.1.2

vlanCurCfgPorts

The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
…

OctetString

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.2.1.3

vlanCurCfgState

Enable or disable a VLAN

Enumeration

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.2.1.4

vlanCurCfgStg

The Spanning Tree Group for the VLAN.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.2.1.6

vlanNewCfgTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.3 · 1 row entry · 8 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk vlanNewCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::vlanNewCfgTable'

The table of VLAN configuration.

vlanNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.3.1

A row in the VLAN configuration table.

Indexes

vlanNewCfgVlanId

Column Syntax OID

vlanNewCfgVlanId

The VLAN identifier.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.3.1.1

vlanNewCfgVlanName

The VLAN name.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.3.1.2

vlanNewCfgPorts

The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ po…

OctetString

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.3.1.3

vlanNewCfgState

Enable or disable a VLAN

Enumerationr/w

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.3.1.4

vlanNewCfgAddPort

The port to be added to the specified VLAN. A '0' value is
returned when read.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.3.1.5

vlanNewCfgRemovePort

The port to be removed from the specified VLAN. A '0'
value is returned when read.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.3.1.6

vlanNewCfgDelete

This is an action object to create or delete a VLAN.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a VLAN

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.3.1.7

vlanNewCfgStg

The Spanning Tree Group for the VLAN.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.3.1.9

trunkGroupCurCfgTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.2 · 1 row entry · 3 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk trunkGroupCurCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::trunkGroupCurCfgTable'

The table of trunk group configuration.

trunkGroupCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.2.1

A row in the trunk group configuration table.

Indexes

trunkGroupCurCfgIndex

Column Syntax OID

trunkGroupCurCfgIndex

The identifier of the trunk group.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.2.1.1

trunkGroupCurCfgPorts

The port list in the trunk group. The ports are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…

OctetString

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.2.1.2

trunkGroupCurCfgState

Enable or disable a trunk group.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.2.1.3

trunkGroupNewCfgTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.3 · 1 row entry · 6 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk trunkGroupNewCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::trunkGroupNewCfgTable'

The table of trunk group configuration.

trunkGroupNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.3.1

A row in the trunk group configuration table.

Indexes

trunkGroupNewCfgIndex

Column Syntax OID

trunkGroupNewCfgIndex

The identifier of the trunk group.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.3.1.1

trunkGroupNewCfgPorts

The port list in the trunk group. The ports are presented
in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…

OctetString

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.3.1.2

trunkGroupNewCfgAddPort

The port to be added in the trunk group. When read, 0 is returned.

trunkGroupNewCfgRemovePort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.3.1.3

The port to be deleted from the trunk group. when read, 0
is returned.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.3.1.4

trunkGroupNewCfgState

Enable or disable a trunk group.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.3.1.5

trunkGroupNewCfgDelete

Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.3.1.6

stgCurCfgTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1 · 1 row entry · 10 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk stgCurCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::stgCurCfgTable'

The table of Spanning Tree Group configuration.

stgCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1

Information about a particular Spanning Tree Group configuration.

Indexes

stgCurCfgIndex

Column Syntax OID

stgCurCfgIndex

The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.1

stgCurCfgState

Turn on of off Spanning Tree operation of a particular Spanning
Tree Group.

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.2

stgCurCfgVlanBmap1obsolete

The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 2048.

in receiving order:

OCTET 1 OCTET 2 .....…

OctetString

Constraints:
range: 0-256

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.3

stgCurCfgVlanBmap2obsolete

The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 2049 to 4096.

in receiving order:

OCTET 1 OCTET 2 ..…

OctetString

Constraints:
range: 0-256

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.4

stgCurCfgPriority

The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.5

stgCurCfgBrgHelloTime

The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.6

stgCurCfgBrgForwardDelay

The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.

Integer32

Constraints:
range: 4-30

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.7

stgCurCfgBrgMaxAge

The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.

Integer32

Constraints:
range: 6-40

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.8

stgCurCfgAgingTime

The timeout period in seconds for aging out dynamically learned
forwarding information.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.9

stgCurCfgVlanBmap

The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4095.

in receiving order:

OCTET 1 OCTET 2 .....…

OctetString

Constraints:
range: 0-512

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.10

stgNewCfgTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2 · 1 row entry · 13 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk stgNewCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::stgNewCfgTable'

The table of Spanning Tree Groups configuration in the new_config.

stgNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1

Information about a particular Spanning Tree Group configuration.

Indexes

stgNewCfgIndex

Column Syntax OID

stgNewCfgIndex

The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.1

stgNewCfgState

Turn on of off Spanning Tree operation of a particular Spanning
Tree Group.

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.2

stgNewCfgDefaultCfg

Setting the value to default-config(1) will set the default
configuration as recommended by IEEE 802.1D for a particular
Spanning Tree Group. default-config (1) is always returned
When read, but it does not mean anyt…

Enumerationr/w

Enumerated Values:

1	default-config

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.3

stgNewCfgAddVlan

The vlan to be added to the specified Spanning Tree Group. A
'0' value is returned when read.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.4

stgNewCfgRemoveVlan

The vlan to be removed from the specified Spanning Tree Group.
A '0' value is returned when read.

stgCurCfgStgIndex stgCurCfgPortIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.5

stgNewCfgVlanBmap1obsolete

The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 2048.

in receiving order:

OCTET 1 OCTET 2 .....…

OctetString

Constraints:
range: 0-256

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.6

stgNewCfgVlanBmap2obsolete

The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 2049 to 4096.

in receiving order:

OCTET 1 OCTET 2 ..…

OctetString

Constraints:
range: 0-256

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.7

stgNewCfgPriority

The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.8

stgNewCfgBrgHelloTime

The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root.

Integer32r/w

Constraints:
range: 1-10

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.9

stgNewCfgBrgForwardDelay

The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.

Integer32r/w

Constraints:
range: 4-30

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.10

stgNewCfgBrgMaxAge

The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.

Integer32r/w

Constraints:
range: 6-40

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.11

stgNewCfgAgingTime

The timeout period in seconds for aging out dynamically learned
forwarding information.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.12

stgNewCfgVlanBmap

The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4095.

in receiving order:

OCTET 1 OCTET 2 .....…

OctetString

Constraints:
range: 0-512

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.13

stgCurCfgPortTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3 · 1 row entry · 8 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk stgCurCfgPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::stgCurCfgPortTable'

The table of Spanning Tree Group port configuration in the
current_config.

stgCurCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3.1

Information about port configuration of a particular Spanning Tree
Group.

Indexes

Column Syntax OID

stgCurCfgStgIndex

The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3.1.1

stgCurCfgPortIndex

The port identifier of a particular Spanning Tree Group.

stgNewCfgStgIndex stgNewCfgPortIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3.1.2

stgCurCfgPortState

Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group.

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3.1.3

stgCurCfgPortPriority

The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3.1.4

stgCurCfgPortPathCost

The contribution of this port to the path cost of paths towards the
spanning tree root which include this port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3.1.5

stgCurCfgPortLink

The type of the port link.

Enumeration

Enumerated Values:

1	auto
2	p2p
3	shared

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3.1.6

stgCurCfgPortEdge

The state of port edge.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3.1.7

stgCurCfgPortFastFwd

The state of port fast forwarding.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3.1.8

stgNewCfgPortTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4 · 1 row entry · 8 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk stgNewCfgPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::stgNewCfgPortTable'

The table of Spanning Tree Group port configuration in the
new_config.

stgNewCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4.1

Information about port configuration of a particular Spanning Tree
Group.

Indexes

Column Syntax OID

stgNewCfgStgIndex

The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4.1.1

stgNewCfgPortIndex

The port identifier of a particular Spanning Tree Group.

pmCurCfgPmirrMoniPortIndex pmCurCfgPmirrMirrPortIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4.1.2

stgNewCfgPortState

Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group.

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4.1.3

stgNewCfgPortPriority

The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4.1.4

stgNewCfgPortPathCost

The contribution of this port to the path cost of paths towards the
spanning tree root which include this port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4.1.5

stgNewCfgPortLink

The type of the port link.

Enumerationr/w

Enumerated Values:

1	auto
2	p2p
3	shared

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4.1.6

stgNewCfgPortEdge

The state of port edge.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4.1.7

stgNewCfgPortFastFwd

The state of port fast forwarding.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4.1.8

pmCurCfgPortMonitorTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.3 · 1 row entry · 3 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk pmCurCfgPortMonitorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::pmCurCfgPortMonitorTable'

The table of monitoring ports.

pmCurCfgPortMonitorEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.3.1

A row in the monitoring port table.

Indexes

Column Syntax OID

pmCurCfgPmirrMoniPortIndex

The monitoring port number.

pmCurCfgPmirrMirrPortIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.3.1.1

The mirrored port number

pmNewCfgPmirrMoniPortIndex pmNewCfgPmirrMirrPortIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.3.1.2

pmCurCfgPmirrDirection

The type of traffic to be monitored with respect to the
mirrored port.

Enumeration

Enumerated Values:

1	in
2	out
3	both

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.3.1.3

pmNewCfgPortMonitorTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.4 · 1 row entry · 5 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk pmNewCfgPortMonitorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::pmNewCfgPortMonitorTable'

The table of monitoring ports.

pmNewCfgPortMonitorEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.4.1

A row in the monitoring port table.

Indexes

Column Syntax OID

pmNewCfgPmirrMoniPortIndex

The monitoring port number.

pmNewCfgPmirrMirrPortIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.4.1.1

The mirrored port number

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.4.1.2

pmNewCfgPmirrDirection

The type of traffic to be monitored with respect to the
mirrored port.

Enumerationr/w

Enumerated Values:

1	in
2	out
3	both

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.4.1.3

pmNewCfgPmirrDelete

Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.4.1.4

pmNewCfgPmonDelete

Setting the value to delete(2) will delete the monitor
port. When read, other(1) is returned.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.4.1.10

mstCistCurCfgPortTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.3 · 1 row entry · 7 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk mstCistCurCfgPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::mstCistCurCfgPortTable'

The table of CIST Port configuration.

mstCistCurCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.3.1

Information about a particular CIST Port configuration.

Indexes

mstCistCurCfgPortIndex

Column Syntax OID

mstCistCurCfgPortIndex

The port number of the port for which this entry contains spanning
tree configuration.

mstCistCurCfgPortPriority

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.3.1.1

The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.

Integer32

Constraints:
range: 0-240

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.3.1.2

mstCistCurCfgPortPathCost

The contribution of this port to the path cost of paths towards
the CIST Root which include this port.

Integer32

Constraints:
range: 0-200000000

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.3.1.3

mstCistCurCfgPortLinkType

The administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shar…

Enumeration

Enumerated Values:

1	auto
2	p2p
3	shared

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.3.1.4

mstCistCurCfgPortEdge

The value of the Edge Port parameter.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.3.1.5

mstCistCurCfgPortStpState

Turn port's Spanning Tree on/off.

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.3.1.6

mstCistCurCfgPortHelloTime

The amount of time between the transmission of Configuration Port
PDUs in seconds.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.3.1.7

mstCistNewCfgPortTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.4 · 1 row entry · 7 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk mstCistNewCfgPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::mstCistNewCfgPortTable'

The table of CIST Port configuration.

mstCistNewCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.4.1

Information about a particular CIST Port configuration.

Indexes

mstCistNewCfgPortIndex

Column Syntax OID

mstCistNewCfgPortIndex

The port number of the port for which this entry contains spanning
tree configuration.

mstCistNewCfgPortPriority

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.4.1.1

The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.

Integer32r/w

Constraints:
range: 0-240

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.4.1.2

mstCistNewCfgPortPathCost

The contribution of this port to the path cost of paths towards
the CIST Root which include this port.

Integer32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.4.1.3

mstCistNewCfgPortLinkType

Enumerationr/w

Enumerated Values:

1	auto
2	p2p
3	shared

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.4.1.4

mstCistNewCfgPortEdge

The value of the Edge Port parameter.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.4.1.5

mstCistNewCfgPortStpState

Turn port's Spanning Tree on/off.

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.4.1.6

mstCistNewCfgPortHelloTime

The amount of time between the transmission of Configuration Port
PDUs in seconds.

Integer32r/w

Constraints:
range: 1-10

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.4.1.7

lacpCurPortCfgTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.7 · 1 row entry · 4 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk lacpCurPortCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::lacpCurPortCfgTable'

The table of LACP port configuration.

lacpCurPortCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.7.1

A row in the LACP port configuration table.

Indexes

lacpCurPortCfgTableId

Column Syntax OID

lacpCurPortCfgTableId

LACP port number.

lacpCurPortActorPortPriority

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.7.1.1

lacpCurPortState

LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer.

Enumeration

Enumerated Values:

1	off
2	active
3	passive

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.7.1.2

The priority value assigned to this Aggregation Port.
This 16-bit value is read-only.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.7.1.3

lacpCurPortActorAdminKey

The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local
significance.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.7.1.4

lacpNewPortCfgTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.8 · 1 row entry · 4 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk lacpNewPortCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::lacpNewPortCfgTable'

The table of LACP port configuration.

lacpNewPortCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.8.1

A row in the LACP port configuration table.

Indexes

lacpNewPortCfgTableId

Column Syntax OID

lacpNewPortCfgTableId

LACP port number.

lacpNewPortActorPortPriority

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.8.1.1

lacpNewPortState

LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer.

Enumerationr/w

Enumerated Values:

1	off
2	active
3	passive

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.8.1.2

The priority value assigned to this Aggregation Port.
This 16-bit value is read-write.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.8.1.3

lacpNewPortActorAdminKey

The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local
significance.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.8.1.4

dot1xCurCfgPortTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3 · 1 row entry · 9 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk dot1xCurCfgPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::dot1xCurCfgPortTable'

The table of 8021x configuration in the Current_config.

dot1xCurCfgPortEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1

Information about 8021x Port Config

Indexes

dot1xCurCfgPortIndex

Column Syntax OID

dot1xCurCfgPortIndex

The 8021x Port number for which the table is related.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1.1

dot1xCurCfgPortMode

Port authenticaton mode
forceUnauth(0),
auto(1),
forceAuth(2)

Enumeration

Enumerated Values:

0	forceUnauth
1	auto
2	forceAuth

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1.2

dot1xCurCfgPortQtPeriod

Quiet period (0-65535)

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1.3

dot1xCurCfgPortTxPeriod

Tx Period

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1.4

dot1xCurCfgPortSupTmout

Supplicant timeout (1..65535)

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1.5

dot1xCurCfgPortSrvTmout

Server timeout (1..65535)

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1.6

dot1xCurCfgPortMaxRq

Maximum numer of requests (1..10)

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1.7

dot1xCurCfgPortRaPeriod

Reautentication period (0..604800)

Integer32

Constraints:
range: 0-604800

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1.8

dot1xCurCfgPortReAuth

ReAuthentication state
off(0),
on(1)

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1.9

dot1xNewCfgPortTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4 · 1 row entry · 11 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk dot1xNewCfgPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::dot1xNewCfgPortTable'

The table of 8021x configuration in the new_config.

dot1xNewCfgPortEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1

Information about 8021x Port Config

Indexes

dot1xNewCfgPortIndex

Column Syntax OID

dot1xNewCfgPortIndex

The 8021x Port number for which the table is related.

dot1xNewCfgPortApplyGlobal

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.1

dot1xNewCfgPortMode

Port authentication mode
forceUnauth(0),
auto(1),
forceAuth(2)

Enumerationr/w

Enumerated Values:

0	forceUnauth
1	auto
2	forceAuth

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.2

dot1xNewCfgPortQtPeriod

Quiet period (0..65535)

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.3

dot1xNewCfgPortTxPeriod

Tx Period (1..65535)

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.4

dot1xNewCfgPortSupTmout

Supplicant Timeout (1..65535)

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.5

dot1xNewCfgPortSrvTmout

Server Timeout (1..65535)

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.6

dot1xNewCfgPortMaxRq

Maximum number of requests (1..10)

Integer32r/w

Constraints:
range: 1-10

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.7

dot1xNewCfgPortRaPeriod

Reauthentication period (1..604800)

Integer32r/w

Constraints:
range: 1-604800

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.8

dot1xNewCfgPortReAuth

Reauthentication state
off(0),
on(1)

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.9

dot1xNewCfgPortDefault

Port default settings

Enumerationr/w

Enumerated Values:

0	other
1	apply

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.10

Apply Global config

Enumerationr/w

Enumerated Values:

0	other
1	apply

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.11

fdbNewCfgStaticTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.12.2 · 1 row entry · 5 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk fdbNewCfgStaticTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::fdbNewCfgStaticTable'

The table of FDB static entries.

fdbNewCfgStaticEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.12.2.1

A row in the fdb table.

Indexes

fdbNewCfgEntryIndex

Column Syntax OID

fdbNewCfgEntryIndex

The fdb entry index

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.12.2.1.1

fdbNewCfgAddVlan

Add vlan for fdb entry index

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.12.2.1.2

fdbNewCfgAddPort

The MAC address port number.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.12.2.1.3

fdbNewCfgAddMac

Add a fdb entry.

SNMPv2-TCPhysAddressr/w

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.12.2.1.4

fdbNewCfgDelStaticEntry

When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.12.2.1.5

hotlinksCurCfgTriggerTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.6 · 1 row entry · 8 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hotlinksCurCfgTriggerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::hotlinksCurCfgTriggerTable'

The Hot Links Trigger Table.

hotlinksCurCfgTriggerTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.6.1

A row in the Hot Links Trigger Table.

Indexes

hotlinksCurCfgTriggerId

Column Syntax OID

hotlinksCurCfgTriggerId

The Trigger identifier.

hotlinksCurCfgTriggerState

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.6.1.1

Enable/disable Trigger state.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.6.1.2

hotlinksCurCfgTriggerPreemptState

Enable/disable Preemption state.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.6.1.3

hotlinksCurCfgTriggerFdelay

Forward Delay setting (in secs).

hotlinksCurCfgTriggerMasterPort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.6.1.4

The master interface port number.

hotlinksCurCfgTriggerMasterTrunk

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.6.1.5

The master interface trunk number.

hotlinksCurCfgTriggerBackupPort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.6.1.6

The backup interface port number.

hotlinksCurCfgTriggerBackupTrunk

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.6.1.7

The backup interface trunk number.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.6.1.8

hotlinksNewCfgTriggerTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.7 · 1 row entry · 8 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hotlinksNewCfgTriggerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::hotlinksNewCfgTriggerTable'

The Hot Links Trigger Table.

hotlinksNewCfgTriggerTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.7.1

A row in the Hot Links Trigger Table.

Indexes

hotlinksNewCfgTriggerId

Column Syntax OID

hotlinksNewCfgTriggerId

The Trigger identifier.

hotlinksNewCfgTriggerState

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.7.1.1

Enable/disable Trigger state.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.7.1.2

hotlinksNewCfgTriggerPreemptState

Enable/disable Preemption state.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.7.1.3

hotlinksNewCfgTriggerFdelay

Forward Delay setting (in secs).

hotlinksNewCfgTriggerMasterPort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.7.1.4

The master interface port number.

hotlinksNewCfgTriggerMasterTrunk

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.7.1.5

The master interface trunk number.

hotlinksNewCfgTriggerBackupPort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.7.1.6

The backup interface port number.

hotlinksNewCfgTriggerBackupTrunk

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.7.1.7

The backup interface trunk number.

stgStatsStpIndex stgStatsPortIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.7.1.8

stgStatsPortTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.2.1 · 1 row entry · 6 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk stgStatsPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::stgStatsPortTable'

The table of Spanning Tree Group port statistics.

stgStatsPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.2.1.1

Statistics about port of a particular Spanning Tree Group.

Indexes

Column	Syntax	OID
stgStatsStpIndex The identifier of a particular Spanning Tree Group.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.2.1.1.1`
stgStatsPortIndex The port identifier of a particular Spanning Tree Group.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.2.1.1.2`
stgStatsPortRcvCfgBpdus Number of Configuration BPDU's received on this port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.2.1.1.3`
stgStatsPortRcvTcnBpdus Number of TCN BPDU's received on this port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.2.1.1.4`
stgStatsPortXmtCfgBpdus Number of Configuration BPDU's trasmitted from the port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.2.1.1.5`
stgStatsPortXmtTcnBpdus Number of TCN BPDU's trasmitted from the port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.2.1.1.6`

lacpStatsTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1 · 1 row entry · 9 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk lacpStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::lacpStatsTable'

The table of LACP Stats.

lacpStatsTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1

Lacp status info.

Indexes

lacpStatsIndex

Column	Syntax	OID
lacpStatsIndex Index	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1.1`
lacpdusRx Valid LACPDUs received	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1.2`
markerpdusRx Valid Marker PDUs received	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1.3`
markerresponsepdusRx Valid Marker Rsp PDUs received	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1.4`
unknownRx Unknown version/TLV type	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1.5`
illegalRx Illegal subtype received	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1.6`
lacpdusTx LACPDUs transmitted	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1.7`
markerpdusTx Market PDUs transmitted	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1.8`
markerresponsepdusTx Marker Rsp PDUs transmitted	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1.9`

hotlinksStatsTriggerTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.6.1 · 1 row entry · 5 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hotlinksStatsTriggerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::hotlinksStatsTriggerTable'

The Hot Links Trigger Table Stats.

hotlinksStatsTriggerTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.6.1.1

A row in the Hot Links Trigger Table Stats.

Indexes

hotlinksStatsTriggerId

Column	Syntax	OID
hotlinksStatsTriggerId The Trigger identifier.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.6.1.1.1`
hotlinksStatsTriggerMasterActive The number of times the master interface was set to active.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.6.1.1.2`
hotlinksStatsTriggerBackupActive The number of times the backup interface was set to active.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.6.1.1.3`
hotlinksStatsTriggerFdbUpdate The number of times an FDB update was performed.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.6.1.1.4`
hotlinksStatsTriggerFdbFailed The number of times an FDB update failed.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.6.1.1.5`

cistInfoPortTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2 · 1 row entry · 9 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk cistInfoPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::cistInfoPortTable'

The table of CIST Port information.

cistInfoPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1

Information about a particular CIST Port.

Indexes

cistInfoPortIndex

Column Syntax OID

cistInfoPortIndex

The port number of the port for which this entry contains spanning
tree configuration.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1.1

cistInfoPortPriority

The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1.2

cistInfoPortPathCost

The contribution of this port to the path cost of paths towards
the CIST Root which include this port.

cistInfoPortDesignatedBridge

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1.3

cistInfoPortState

Current state of the Port as defined by the Common
spanning tree protocol.

Enumeration

Enumerated Values:

1	disabled
2	discarding
4	learning
5	forwarding

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1.4

cistInfoPortRole

Selected Port Role of the port for this spanning tree instance.

Enumeration

Enumerated Values:

1	disabled
2	alternate
3	backup
4	root
5	designated
6	master
7	unknown

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1.5

The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment.

cistInfoPortDesignatedPort

Type Constraints:
range: 8

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1.6

The Port identifier of the port on the Designated Bridge
for this port's segment.

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1.7

cistInfoPortLinkType

The point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that thi…

Enumeration

Enumerated Values:

1	p2p
2	shared
3	unknown

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1.8

cistInfoPortHelloTime

The amount of time between the transmission of Configuration Port
PDUs in seconds.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1.9

fdbTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.2 · 1 row entry · 7 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk fdbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::fdbTable'

The table of FDB entries.

fdbEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.2.1

A row in the FDB table

Indexes

fdbMacAddr

Column Syntax OID

fdbMacAddr

The MAC address for the FDB entry.

SNMPv2-TCPhysAddress

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.2.1.1

fdbVlan

The VLAN ID for the FDB entry.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.2.1.2

fdbSrcPort

Either the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not bee…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.2.1.3

fdbState

The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(3) : the MAC address …

Enumeration

Enumerated Values:

1	unknown
2	ignore
3	forward
4	flood
5	ffd
6	trunk
7	vir
8	vsr
9	vpr
10	other

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.2.1.4

fdbRefSps

The referenced SPs associated with this FDB entry.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.2.1.5

fdbLearnedPort

The learned port associated with this FDB entry.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.2.1.6

fdbSrcTrunk

Either the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not as…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.2.1.7

stpInfoTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1 · 1 row entry · 17 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk stpInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::stpInfoTable'

The table of Spanning Tree Group information.

stpInfoTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1

Information about a particular Spanning Tree Group.

Indexes

stpInfoIndex

Column Syntax OID

stpInfoIndex

The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.

stpInfoTimeSinceTopChange

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.1

stpInfoState

Turn on of off Spanning Tree operation of a particular Spanning
Tree Group.

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.2

stgInfoVlanBmap

The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.

in receiving order:

OCTET 1 OCTET 2 .....
…

OctetString

Constraints:
range: 0-512

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.3

The time (in hundredths of a second) since the last time a topology
change was detected by the bridge entity.

SNMPv2-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.4

stpInfoTopChanges

The total number of topology changes detected by this bridge since
the management entity was last reset or initialized.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.5

stpInfoDesignatedRoot

The bridge identifier of the root of the spanning tree as determined
by the Spanning Tree Protocol as executed by this node. This value
is used as the Root Identifier parameter in all Configuration Bridge
PDUs origi…

Type Constraints:
range: 8

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.6

stpInfoRootCost

The cost of the path to the root as seen from this bridge.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.7

stpInfoRootPort

The port number of the port which offers the lowest cost path from
this bridge to the root bridge.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.8

stpInfoMaxAge

The maximum age of Spanning Tree Protocol information learned from
the network on any port before it is discarded, in units of
hundredths of a second. This is the actual value that this bridge is
currently using.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.9

stpInfoHelloTime

The amount of time between the transmission of Configuration bridge
PDUs by this node on any port when it is the root of the spanning
tree or trying to become so, in units of hundredths of a second.
This is the actual…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.10

stpInfoForwardDelay

This time value, measured in units of hundredths of a second,
controls how fast a port changes its spanning state when moving
towards the Forwarding state. The value determines how long the port
stays in each of the …

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.11

stpInfoHoldTime

This time value determines the interval length during which no more
than two Configuration bridge PDUs shall be transmitted by this node,
in units of hundredths of a second.

stpInfoPortStpIndex stpInfoPortIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.12

stpInfoBrgPriority

The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.13

stpInfoBrgHelloTime

The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.14

stpInfoBrgForwardDelay

The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.

Integer32

Constraints:
range: 4-30

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.15

stpInfoBrgMaxAge

The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.

Integer32

Constraints:
range: 6-40

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.16

stpInfoAgingTime

The timeout period in seconds for aging out dynamically learned
forwarding information.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.17

stpInfoPortTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2 · 1 row entry · 9 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk stpInfoPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::stpInfoPortTable'

The table of Spanning Tree Group port information.

stpInfoPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1

Information about port configuration for a particular Spanning Tree
Group.

Indexes

Column Syntax OID

stpInfoPortStpIndex

The identifier of a particular Spanning Tree Group.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1.1

stpInfoPortIndex

The port identifier of a particular Spanning Tree Group.

stpInfoPortDesignatedRoot

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1.2

stpInfoPortState

The port's current state as defined by application of the Spanning
Tree Protocol. This state controls what action a port takes on
reception of a frame. If the bridge has detected a port that is
malfunctioning it wil…

Enumeration

Enumerated Values:

1	disabled
2	blocking
3	listening
4	learning
5	forwarding
6	broken

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1.3

The unique Bridge Identifier of the Bridge recorded as the Root in
the Configuration BPDUs transmitted by the Designated Bridge for the
segment to which the port is attached.

stpInfoPortDesignatedCost

Type Constraints:
range: 8

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1.4

The path cost of the Designated Port of the segment connected to this
port. This value is compared to the Root Path Cost field in received
bridge PDUs.

stpInfoPortDesignatedBridge

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1.5

The Bridge Identifier of the bridge which this port considers to be
the Designated Bridge for this port's segment.

stpInfoPortDesignatedPort

Type Constraints:
range: 8

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1.6

The Port Identifier of the port on the Designated Bridge for this
port's segment.

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1.7

stpInfoPortForwardTransitions

The number of times this port has transitioned from the Learning
state to the Forwarding state.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1.8

stpInfoPortPathCost

The path cost of the port.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1.9

lacpInfoPortTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.4.1 · 1 row entry · 5 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk lacpInfoPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::lacpInfoPortTable'

The table of LACP port information.

lacpInfoPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.4.1.1

Information about a LACP port.

Indexes

lacpInfoPortIndex

Column Syntax OID

lacpInfoPortIndex

The port identifier.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.4.1.1.1

lacpInfoPortSelected

Selected flag value indicates that the selection logic has selected
an appropriate Aggregator. A value of unselected indicates that no
aggregator is currently selected. A value of standby indicates that
although the se…

Enumeration

Enumerated Values:

1	selected
2	unselected
3	standby

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.4.1.1.2

lacpInfoPortNtt

Need to transmit flag. True indicates that there is new protocol
information that should be transmitted on the link.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.4.1.1.3

lacpInfoPortReadyN

True value for Ready_N flag indicates that the wait while timer
has expired and it is waiting to attach to an aggregator.
There is one Ready_N value for each port.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.4.1.1.4

lacpInfoPortMoved

Port Moved flag is set to true if the receive machine for a port
is in the port_disabled state, and the combination of partner oper
system and partner oper port number in use by the port has been
used by received in a…

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.4.1.1.5

dot1xInfoPortTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.1 · 1 row entry · 6 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk dot1xInfoPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::dot1xInfoPortTable'

The table of 8021x configuration in the Current_config.

dot1xInfoPortEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.1.1

Information about 8021x Port Config

Indexes

dot1xInfoPortIndex

Column Syntax OID

dot1xInfoPortIndex

The 8021x Port number for which the table is related.

dot1xInfoPortAuthPAEState

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.1.1.1

dot1xInfoPortAuthMode

Authentication mode

Enumeration

Enumerated Values:

0	forceUnauth
1	auto
2	forceAuth

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.1.1.2

dot1xInfoPortAuthStatus

Authentication status

Enumeration

Enumerated Values:

0	authorized
1	unauthorized

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.1.1.3

dot1xInfoPortCtrlDir

Controlled Directions

Enumeration

Enumerated Values:

0	both
1	in

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.1.1.4

Authenticator PAE State

Enumeration

Enumerated Values:

0	initialize
1	disconnected
2	connecting
3	authenticating
4	authenticated
5	aborting
6	held
7	forceauth
8	forceunauth

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.1.1.5

dot1xInfoPortBackAuthState

Backend authenticator PAE state

Enumeration

Enumerated Values:

0	request
1	response
2	success
3	fail
4	timeout
5	idle
6	initialize

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.1.1.6

dot1pInfoPriorityCOSTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.1 · 1 row entry · 3 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk dot1pInfoPriorityCOSTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::dot1pInfoPriorityCOSTable'

The table of current priority to COS queue information.

dot1pInfoPriorityCOSEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.1.1

Current information about 8021p priority to COS queue.

Indexes

dot1pInfoPriorityIndex

Column	Syntax	OID
dot1pInfoPriorityIndex The 8021p priority for which the table is related.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.1.1.1`
dot1pInfoPriorityCOSQueue The 8021p priority COSq.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.1.1.2`
dot1pInfoPriorityCOSWeight The 8021p priority weight.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.1.1.3`

dot1pInfoPortTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.2 · 1 row entry · 4 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk dot1pInfoPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::dot1pInfoPortTable'

The table of 8021p port priority configuration 
in the Current_config.

dot1pInfoPortEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.2.1

Information about 8021p Port Priority

Indexes

dot1pInfoPortIndex

Column	Syntax	OID
dot1pInfoPortIndex The 8021p Port number for which the table is related.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.2.1.1`
dot1pInfoPortPriority The 8021p Port number for which the table is related.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.2.1.2`
dot1pInfoPortCOSq The 8021p port COSq.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.2.1.3`
dot1pInfoPortWeight The 8021p port weight.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.2.1.4`

vlanInfoTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.8.1 · 1 row entry · 4 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk vlanInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::vlanInfoTable'

The table of VLAN information.

vlanInfoTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.8.1.1

Information about a particular VLAN.

Indexes

vlanInfoId

Column Syntax OID

vlanInfoId

The VLAN identifier.

Integer32

Constraints:
range: 1-4095

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.8.1.1.1

vlanInfoName

The VLAN name.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.8.1.1.2

vlanInfoStatus

Enable or disable, VLAN state information

Enumeration

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.8.1.1.3

vlanInfoPorts

The port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| …

OctetString

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.8.1.1.4

trunkGroupInfoTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.9.1 · 1 row entry · 3 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk trunkGroupInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::trunkGroupInfoTable'

The table of trunk group information.

trunkGroupInfoTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.9.1.1

A row in trunk group information table.

Indexes

trunkGroupInfoIndex

Column Syntax OID

trunkGroupInfoIndex

The identifier of the trunk group.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.9.1.1.1

trunkGroupInfoState

Trunk group state.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.9.1.1.2

trunkGroupInfoPorts

The port list in the trunk group. The ports are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…

OctetString

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.9.1.1.3

hotlinksInfoTriggerTable

table

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.10.3 · 1 row entry · 5 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hotlinksInfoTriggerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE2-PHYSICAL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE2-PHYSICAL-MIB::hotlinksInfoTriggerTable'

The Hot Links Trigger Table Info.

hotlinksInfoTriggerTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.10.3.1

A row in the Hot Links Trigger Table Info.

Indexes

hotlinksInfoTriggerId

Column Syntax OID

hotlinksInfoTriggerId

The Trigger identifier.

hotlinksInfoTriggerPreemptState

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.10.3.1.1

hotlinksInfoTriggerState

Enable/disable Trigger state info.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.10.3.1.2

Enable/disable Preemption state info.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.10.3.1.3

hotlinksInfoTriggerFdelay

Forward Delay setting info (in secs).