BLADE-MIB Table View

Table of power module health information.  Contains
the power health information for each power module.

powerModuleHealthEntry row .1.3.6.1.4.1.2.3.51.2.2.4.1.1

Power Module health entry

Indexes

No indexes recorded

Column	Syntax	OID
powerModuleIndexmandatory Power module sequence index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.4.1.1.1
powerModuleExistsmandatory Indicates whether the power module specified exists or not.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.4.1.1.2
powerModuleStatemandatory The health state for the power module.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.4.1.1.3
powerModuleDetailsmandatory The details for this power module.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.4.1.1.4

Table of fan pack information.  Contains
the information for each fan pack.
          
NOTE: Fan packs are also referred to as Power Module Cooling Devices.

fanPackEntry row .1.3.6.1.4.1.2.3.51.2.2.6.1.1

Fan Pack entry

Indexes

No indexes recorded

Column	Syntax	OID
fanPackIndexmandatory Fan Pack sequence index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.6.1.1.1
fanPackExistsmandatory Indicates whether the fan pack specified exists or not.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.6.1.1.2
fanPackStatemandatory The health state for the fan pack. 0 = unknown, 1 = good, 2 = warning, 3 = bad.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.6.1.1.3
fanPackFanCountmandatory The number of fans in the fan pack.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.6.1.1.4
fanPackAverageSpeedmandatory The average speed of all fans in the fan pack expressed in percent(%) of maximum RPM. If the fan pack is determined not to be running or the fan pack speed cannot be determined, the string will indicate 'Offline'. The …	OctetString	.1.3.6.1.4.1.2.3.51.2.2.6.1.1.5
fanPackAverageSpeedRPMmandatory The average speed of all fans in the fan pack expressed in RPM. If the fan pack is determined not to be running or the fan pack speed cannot be determined, the string will indicate 'Offline'. The string 'Not Readable!' …	OctetString	.1.3.6.1.4.1.2.3.51.2.2.6.1.1.6
fanPackControllerStatemandatory The health state for the controller for the fan pack. 0 = operational, 1 = flashing in progress, 2 = not present, 3 = communication error, 255 = unknown	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.6.1.1.7

Table of System Health summary. Contains more detailed
information about the reasons for the overall system
health status.
          
NOTE: This MIB object is for BladeCenter only.

systemHealthSummaryEntry row .1.3.6.1.4.1.2.3.51.2.2.7.2.1

System Health Summary entry

NOTE: This MIB object is for BladeCenter only.

Indexes

No indexes recorded

Column	Syntax	OID
systemHealthSummaryIndexmandatory System health summary index. NOTE: This MIB object is for BladeCenter only.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.7.2.1.1
systemHealthSummarySeveritymandatory System health summary severity. NOTE: This MIB object is for BladeCenter only.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.7.2.1.2
systemHealthSummaryDescriptionmandatory System health summary description. NOTE: This MIB object is for BladeCenter only.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.7.2.1.3
systemHealthSummaryDateTimemandatory System health summary date time. NOTE: This MIB object is for BladeCenter only.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.7.2.1.4

Table of blade status information.
          
NOTE: Querying objects in this table may take significantly longer
than normal, so it is recommended that the query timeout be set to 
a large value. On a fully populated chassis, the timeout should be set
to 120 seconds or more.

bladeLEDsEntry row .1.3.6.1.4.1.2.3.51.2.2.8.2.1.1

Blade system status entry

Indexes

No indexes recorded

Column	Syntax	OID
ledBladeIndexmandatory Blade LED table index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.1
ledBladeIdmandatory The numeric blade ID.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.2
ledBladeExistsmandatory Indicates whether the server blade specified exists or not.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.3
ledBladePowerStatemandatory Indicates the power state of the blade specified.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.4
ledBladeHealthStatemandatory The system health state for the blade. Unknown: Blade is in an undefined state. Good: Blade is operating normally. Warning: One or more outstanding warnings exist for this blade. Critical: One or more out…	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.5
ledBladeNamemandatory The name of the blade as a null terminated string.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.6
ledBladeSystemErrormandatory Indicates whether the blade system error LED is on or off.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.7
ledBladeInformationmandatory Indicates whether the blade information LED is on or off. For Write access, the LED can be turned off only.	Enumerationr/w	.1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.8
ledBladeKVMmandatory Indicates whether the blade KVM LED is on, off, or blinking.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.9
ledBladeMediaTraymandatory Indicates whether the blade media tray LED is on, off, or blinking.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.10
ledBladeIdentitymandatory Indicates whether the blade identify LED is on, off, or blinking.	Enumerationr/w	.1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.11

Table of blade LEDs detailed information.
          
NOTE: Querying objects in this table may take significantly longer
than normal, so it is recommended that the query timeout be set to 
a large value. On a fully populated chassis, the timeout should be set
to 120 seconds or more.

bladeLEDsDetailsEntry row .1.3.6.1.4.1.2.3.51.2.2.8.2.2.1

Blade LEDs Details entry

Indexes

No indexes recorded

Column	Syntax	OID
ledIndexmandatory The LED index number. For consistent results, view as a table and not as individual entries.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.8.2.2.1.1
ledBladeBayNumbermandatory The bay number of the main server blade that the LED is grouped into. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.8.2.2.1.2
ledBladeComponentTypemandatory Type of the component/subcomponent grouping for this LED. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.8.2.2.1.3
ledBladeLabelmandatory Text label for a LED. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.8.2.2.1.4
ledBladeStatemandatory Text description which denotes color or on/off/blink state for a LED. For consistent results, view as a table and not as individual entries.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.2.2.1.5
ledBladeLocationmandatory Location of this LED. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.8.2.2.1.6

Table of switch module LEDs information.

smLEDsEntry row .1.3.6.1.4.1.2.3.51.2.2.8.4.1.1

Switch module LEDs information entry

Indexes

No indexes recorded

Column	Syntax	OID
ledSMIndexmandatory Switch module LEDs table index.	Integer32	.1.3.6.1.4.1.2.3.51.2.2.8.4.1.1.1
ledSMLEDsmandatory A bitmap of LEDs information on the selected switch module. The bitmap is a string containing a list of 1's and 0's. Every 4 bytes are used to represent a led state. The first 64 bytes represent the status of the exte…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.8.4.1.1.2

Table of blower LEDs information.
          
NOTE: Blowers are also referred to as Chassis Cooling Devices.

blowerLEDsEntry row .1.3.6.1.4.1.2.3.51.2.2.8.5.1.1

Blower LEDs information entry

Indexes

No indexes recorded

Column	Syntax	OID
ledBlowerIndexmandatory Blower LEDs table index.	Integer32	.1.3.6.1.4.1.2.3.51.2.2.8.5.1.1.1
ledBlowerIdmandatory The numeric blade ID.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.5.1.1.2
ledBlowerExistsmandatory Indicates whether the blower specified exists or not.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.5.1.1.3
ledBlowerErrormandatory Indicates whether the blower error LED is on, off, or not available.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.5.1.1.4

Table of fan pack LEDs information.
          
NOTE: Fan packs are also referred to as Power Module Cooling Devices.

fanPackLEDsEntry row .1.3.6.1.4.1.2.3.51.2.2.8.6.1.1

Fan Pack LEDs information entry

Indexes

No indexes recorded

Column	Syntax	OID
ledFanPackIndexmandatory Fan Pack LEDs table index.	Integer32	.1.3.6.1.4.1.2.3.51.2.2.8.6.1.1.1
ledFanPackIdmandatory The numeric fan pack ID.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.6.1.1.2
ledFanPackExistsmandatory Indicates whether the fan pack specified exists or not.	Integer32	.1.3.6.1.4.1.2.3.51.2.2.8.6.1.1.3
ledFanPackErrormandatory Indicates whether the fan pack error LED is on or off.	Integer32	.1.3.6.1.4.1.2.3.51.2.2.8.6.1.1.4

Table of Media Tray Status LEDs information.
          
NOTE: This MIB object is for BladeCenter HT only.

mtStatusLEDsEntry row .1.3.6.1.4.1.2.3.51.2.2.8.7.1.1

Media Tray Status LEDs information entry.

NOTE: This MIB object is for BladeCenter HT only.

Indexes

No indexes recorded

Column	Syntax	OID
ledMediaTrayIndexmandatory Media Tray Status LEDs table index. NOTE: This MIB object is for BladeCenter HT only.	Integer32	.1.3.6.1.4.1.2.3.51.2.2.8.7.1.1.1
ledMediaTrayIdmandatory The numeric Media Tray ID. NOTE: This MIB object is for BladeCenter HT only.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.7.1.1.2
ledMediaTrayExistsmandatory Indicates whether the Media Tray exists or not. NOTE: This MIB object is for BladeCenter HT only.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.7.1.1.3
ledMediaTrayFaultmandatory Indicates whether the Media Tray Fault LED is on or off. NOTE: This MIB object is for BladeCenter HT only.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.7.1.1.5

Table of Network Clock Status LEDs information.
          
NOTE: This MIB object is for BladeCenter HT only.

ncStatusLEDsEntry row .1.3.6.1.4.1.2.3.51.2.2.8.9.1.1

Network Clock Status LEDs information entry.

NOTE: This MIB object is for BladeCenter HT only.

Indexes

No indexes recorded

Column	Syntax	OID
ledNetworkClockIndexobsolete Network Clock Status LEDs table index. NOTE: This MIB object is for BladeCenter HT only.	Integer32	.1.3.6.1.4.1.2.3.51.2.2.8.9.1.1.1
ledNetworkClockIdobsolete The numeric Network Clock ID. NOTE: This MIB object is for BladeCenter HT only.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.9.1.1.2
ledNetworkClockExistsobsolete Indicates whether the Network Clock exists or not. NOTE: This MIB object is for BladeCenter HT only.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.9.1.1.3
ledNetworkClockFRRobsolete Indicates whether the Network Clock Safe To Remove LED is on or off. NOTE: This MIB object is for BladeCenter HT only.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.9.1.1.4
ledNetworkClockFaultobsolete Indicates whether the Network Clock Fault LED is on or off. NOTE: This MIB object is for BladeCenter HT only.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.9.1.1.5

Table of Multiplexer Expansion Module Status LEDs information.
          
NOTE: This MIB object is for BladeCenter HT only.

mxStatusLEDsEntry row .1.3.6.1.4.1.2.3.51.2.2.8.10.1.1

Multiplexer Expansion Module Status LEDs information entry.

NOTE: This MIB object is for BladeCenter HT only.

Indexes

No indexes recorded

Column	Syntax	OID
ledMuxIndexmandatory Multiplexer Expansion Module Status LEDs table index. NOTE: This MIB object is for BladeCenter HT only.	Integer32	.1.3.6.1.4.1.2.3.51.2.2.8.10.1.1.1
ledMuxIdmandatory The numeric Multiplexer Expansion Module ID. NOTE: This MIB object is for BladeCenter HT only.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.10.1.1.2
ledMuxExistsmandatory Indicates whether the Multiplexer Expansion Module exists or not. NOTE: This MIB object is for BladeCenter HT only.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.10.1.1.3
ledMuxFRRmandatory Indicates whether the Multiplexer Expansion Module Safe To Remove LED is on or off. NOTE: This MIB object is for BladeCenter HT only.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.10.1.1.4
ledMuxFaultmandatory Indicates whether the Multiplexer Expansion Module Fault LED is on or off. NOTE: This MIB object is for BladeCenter HT only.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.10.1.1.5

Table of storage module LEDs information.
          
NOTE: This MIB object is for BladeCenter S only.

storageLEDsEntry row .1.3.6.1.4.1.2.3.51.2.2.8.11.1.1

Storage Module LEDs information entry

NOTE: This MIB object is for BladeCenter S only.

Indexes

No indexes recorded

Column	Syntax	OID
ledStorageIndexmandatory Storage Module LEDs table index. NOTE: This MIB object is for BladeCenter S only.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.8.11.1.1.1
ledStorageIdmandatory The numeric storage module ID. NOTE: This MIB object is for BladeCenter S only.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.11.1.1.2
ledStorageExistsmandatory Indicates whether the storage module specified exists or not. NOTE: This MIB object is for BladeCenter S only.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.11.1.1.3
ledStorageErrormandatory Indicates the status of the storage module error LED. NOTE: This MIB object is for BladeCenter S only.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.8.11.1.1.4

Table of System Health summary. Contains more detailed
information about the reasons for the overall system
health status.
          
NOTE: This MIB object is for BladeCenter T only.
NOTE: This table may contain one entry if no alarms are in progress.  That one entry,
     if present, contains no alarms but a message of 'Good' in the severity object.

telcoSystemHealthSummaryEntry row .1.3.6.1.4.1.2.3.51.2.2.9.2.1

BladeCenter T System Health Summary entry.

NOTE: This MIB object is for BladeCenter T only.

Indexes

No indexes recorded

Column	Syntax	OID
telcoSystemHealthSummaryIndexmandatory BladeCenter T System Health Summary Index. NOTE: This MIB object is for BladeCenter T only.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.9.2.1.1
telcoSystemHealthSummarySeveritymandatory BladeCenter T System Health Summary Severity. The values and meanings are as follows: 0x06 Critical-Power 0x05 Critical 0x04 Major-Power 0x03 Major 0x02 Minor-Power 0x01 Minor 0xFF Normal …	OctetString	.1.3.6.1.4.1.2.3.51.2.2.9.2.1.2
telcoSystemHealthSummaryDescriptionmandatory BladeCenter T System Health Summary Description. NOTE: This MIB object is for BladeCenter T only. NOTE: If no alarms are in progress, this object contains 'No alarm events'.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.9.2.1.3
telcoSystemHealthSummaryEventNamemandatory BladeCenter T System Health Summary Event Name. NOTE: This MIB object is for BladeCenter T only.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.9.2.1.4
telcoSystemHealthSummaryEventKeyIDmandatory BladeCenter T System Health Summary Event Key ID. An octet string expressed as 'mmm:ggg:iii:aaa:sss' where: m : Module ID value of decimal digits(1-255) or blank space(s) for leading zero(s) g : Gen ID valu…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.9.2.1.5
telcoSystemHealthSummaryAcknowledgemandatory BladeCenter T System Health Summary Acknowledge. Indicates whether the alarm event is acknowledged or unacknowledged. NOTE: This MIB object is for BladeCenter T only.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.9.2.1.6
telcoSystemHealthSummaryAssertTimemandatory BladeCenter T System Health Summary Assert Time. NOTE: This MIB object is for BladeCenter T only. NOTE: If no alarms are in progress, this object contains 'No alarm events'.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.9.2.1.7

Table of Fuel Gauge information.

fuelGaugeEntry row .1.3.6.1.4.1.2.3.51.2.2.10.1.1.1

Fuel Gauge entry

Indexes

No indexes recorded

Column	Syntax	OID
fuelGaugeIndexmandatory Fuel Gauge Table Index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.1
fuelGaugePowerDomainNumbermandatory Fuel Gauge Table Power Domain Number.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.2
fuelGaugeStatusmandatory Fuel Gauge Table Status for the power domain. The response will start out with a numeric value (0 = unknown, 1 = good, 2 = warning, and 3: bad), followed by a text message.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.3
fuelGaugeFirstPowerModulemandatory Fuel Gauge Table First Power Module capacity in Watts in the power domain. NOTE: First power module in power domain 1 and 2 is in bay 1 and 3 respectively.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.4
fuelGaugeSecondPowerModulemandatory Fuel Gauge Table Second Power Module capacity in Watts in the power domain. NOTE: Second power module in power domain 1 and 2 is in bay 2 and 4 respectively.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.5
fuelGaugePowerManagementPolicySettingmandatory Fuel Gauge Table for the Power Management Policy Setting for each power domain. When a 1200W or 1400W power module is installed in the domain the power management policy will not be applicable. In addition the power con…	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.6
fuelGaugeTotalPowermandatory This field displays the total available power for each power domain based on installed power modules and the current Power Management Policy Setting. When a 1200W or 1400W power module is installed in the domain the pow…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.7
fuelGaugeAllocatedPowermandatory This field displays the power that has been reserved in each power domain. NOTE: 1) Power is always reserved in domain 1 for two management modules and two I/O modules. 2) Power is reserved for I/O modules installed in…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.8
fuelGaugeRemainingPowermandatory This field displays the remaining power available in each domain. Remaining Power = Total Power minus Power In Use When a 1200W or 1400W power module is installed in the domain the power management policy will not be ap…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.9
fuelGaugePowerInUsedmandatory This field displays the total power being used in each power domain. When a 1200W or 1400W power module is installed in the domain the power management policy will not be applicable. In addition the power consumption in…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.10

Table of Power Domain 1.
          
NOTE: Blowers are also referred to as Chassis Cooling Devices.
NOTE: Fan packs are also referred to as Power Module Cooling Devices.

powerDomain1Entry row .1.3.6.1.4.1.2.3.51.2.2.10.2.1.1

Fuel Gauge entry

Indexes

No indexes recorded

Column	Syntax	OID
pd1Indexmandatory Power Domain 1 Table Index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.1
pd1BayNumbermandatory Power Domain 1 Table Bay Number. The following Bay Number IDs are used in the BladeCenter: notApplicable(1), notApplicable(2), blowerBay1(3), blowerBay2(4), managementModuleBay1(5), managementModuleBay2(6), switc…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.2
pd1BladePrimarySlotmandatory Power Domain 1 Table Blade Primary Slot can be useful when a server blade spans multiple slots (e.g. double wide or triple wide). For example if the blade is double wide and is installed in slot 3 and 4. 3 is primary …	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.3
pd1ModuleStatusmandatory Power Domain 1 Table Module Throttle Status.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.4
pd1ModuleNamemandatory Power Domain 1 Table Module Name.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.5
pd1ModuleStatemandatory Power Domain 1 Table Module State.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.6
pd1ModuleAllocatedPowerCurrentmandatory Power Domain 1 Table Allocated Power Current indicates the current power allocation for the module in Watts. When a 1200W or 1400W power module is installed in the domain the power management policy will not be applicab…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.7
pd1ModuleAllocatedPowerMaxmandatory Power Domain 1 Table Allocated Power Max indicates the maximum power allocation for the module in Watts. It is indicative of the maximum amount of power the module will consume in the domain when it is fully populated …	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.8
pd1ModuleAllocatedPowerMinmandatory Power Domain 1 Table Allocated Power Min indicates the minumum power allocation for the module in Watts. It is indicative of the minumum power consumption of the component in the domain based on its maximum throttle li…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.9
pd1ModuleCPUDutyCyclesmandatory Power Domain 1 Table Module CPUs Duty Cycles applies to blade servers only. It displays the duty cycle for each CPU on the blade as a percentage. Note that some blades do not report the CPU duty cycles. In this case,…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.10
pd1ModuleThrottlemandatory Power Domain 1 Table Module Throttle indicates whether the server blade may be allowed to throttle or not. When a 1200W or 1400W power module is installed in the domain the power management policy will not be applicable…	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.11
pd1ModulePowerCapabilitiesmandatory Power Domain 1 Table Module Power Capabilities. staticPowerManagement: the module with the static worst case power values. fixedPowermanagement: the module with the static power values but ability…	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.12
pd1ModuleMeasuredOrStaticmandatory Power Domain 1 Table Module Measured Or Static.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.13

Table of Power Domain 1 Power Trending Information.

pd1PowerTrendingSampleEntry row .1.3.6.1.4.1.2.3.51.2.2.10.2.3.10.1

Power Domain 1 Power Trending Sample entry.

Indexes

No indexes recorded

Column	Syntax	OID
pd1PowerTrendingSampleIndexmandatory Power Domain 1 Power Trending Sample Table Index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.2.3.10.1.1
pd1PowerTrendingSampleTimeStampmandatory Power Domain 1 Power Trending Sample Table Timestamp.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.2.3.10.1.2
pd1PowerTrendingSampleAvemandatory Power Domain 1 Power Trending Table Average Power.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.2.3.10.1.3

Table of Power Domain 2.
          
NOTE: Blowers are also referred to as Chassis Cooling Devices.
NOTE: Fan packs are also referred to as Power Module Cooling Devices.

powerDomain2Entry row .1.3.6.1.4.1.2.3.51.2.2.10.3.1.1

Fuel Gauge entry

Indexes

No indexes recorded

Column	Syntax	OID
pd2Indexmandatory Power Domain 2 Table Index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.1
pd2BayNumbermandatory Power Domain 2 Table Bay Number. The following Bay Number IDs are used in the BladeCenter: serverBladeBay7(1), serverBladeBay8(2), serverBladeBay9(3), serverBladeBay10(4), serverBladeBay11(5), serverBladeBay12(6),…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.2
pd2BladePrimarySlotmandatory Power Domain 2 Table Blade Primary Slot can be useful when a server blade spans multiple slots (e.g. double wide or triple wide). For example if the blade is double wide and is installed in slot 3 and 4. 3 is primary …	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.3
pd2ModuleStatusmandatory Power Domain 2 Table Module throttle status.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.4
pd2ModuleNamemandatory Power Domain 2 Table Module Name.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.5
pd2ModuleStatemandatory Power Domain 2 Table Power State.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.6
pd2ModuleAllocatedPowerCurrentmandatory Power Domain 2 Table Allocated Power Current indicates the current power allocation for the module. When a 1200W or 1400W power module is installed in the domain the power management policy will not be applicable. In ad…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.7
pd2ModuleAllocatedPowerMaxmandatory Power Domain 2 Table Allocated Power Max indicates the maximum power allocation for the module in Watts. It is indicative of the maximum amount of power the module will consume in the domain when it is fully populated …	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.8
pd2ModuleAllocatedPowerMinmandatory Power Domain 2 Table Allocated Power Min indicates the minumum power allocation for the module in Watts. It is indicative of the minumum power consumption of the component in the domain based on its maximum throttle li…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.9
pd2ModuleCPUDutyCyclesmandatory Power Domain 2 Table Module CPUs Duty Cycles applies to blade servers only. It displays the duty cycle for each CPU on the blade as a percentage. Note that some blades do not report the CPU duty cycles. In this case,…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.10
pd2ModuleThrottlemandatory Power Domain 2 Table Module Throttle indicates whether the server blade may be allowed to throttle or not. When a 1200W or 1400W power module is installed in the domain the power management policy will not be applicable…	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.11
pd2ModulePowerCapabilitiesmandatory Power Domain 2 Table Module Power Capabilities. staticPowerManagement: the module with the static worst case power values. fixedPowermanagement: the module with the static power values but ability…	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.12
pd2ModuleMeasuredOrStaticmandatory Power Domain 2 Table Module Measured Or Static.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.13

Table of Power Domain 2 Power Trending Sample Information.

pd2PowerTrendingSampleEntry row .1.3.6.1.4.1.2.3.51.2.2.10.3.3.10.1

Power Domain 2 Power Trending Sample entry.

Indexes

No indexes recorded

Column	Syntax	OID
pd2PowerTrendingSampleIndexmandatory Power Domain 2 Power Trending Sample Table Index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.3.3.10.1.1
pd2PowerTrendingSampleTimeStampmandatory Power Domain 2 Power Trending Sample Table Timestamp.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.3.3.10.1.2
pd2PowerTrendingSampleAvemandatory Power Domain 2 Power Trending Sample Table Average Power.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.3.3.10.1.3

Table of Blade Module Details.

bladeDetailsEntry row .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1

Blade Module Details entry.

Indexes

No indexes recorded

Column	Syntax	OID
bladeDetailsIndexmandatory Blade Module Details Table Index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.1
bladeDetailsIdmandatory Blade Module Details Table Blade Id.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.2
bladeDetailsMaxPowerConfigmandatory Blade Module Details Table Maximum Power Configuration. Allow the user to set the maximum power that can be used by the blade. This function is also known as power capping. If the value of maximum power c…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.3
bladeDetailsEffectiveClockRatemandatory Blade Module Details Table Effective CPU Clock Rate applies to DPM blades only. It displays processor's effective clock rate based on sample interval. Note that some blades do not effective clock rate. In this case, …	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.4
bladeDetailsMaximumClockRatemandatory Blade Module Details Table Maximum CPU Clock Rate applies to DPM blades only. It displays processor's maximum clock rate based on sample interval. Note that some blades do not maximum clock rate. In this case, 'notAp…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.5
bladeDetailsPowerSaverModemandatory When enabled, the static low power saver mode allows the blade to selectively alter its operating voltage and frequency to reduce power consumption. This feature is not available on all blade types. Please refer to the…	Enumerationr/w	.1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.6
bladeDetailsDynamicPowerSavermandatory When enabled, Dynamic Power Saver allows the voltage and frequency of the CPUs on the blade to be controlled based on how busy the CPU is. This feature is not available on all blade types. Please refer to the blade doc…	Enumerationr/w	.1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.7
bladeDetailsDynamicPowerFavorPerformanceOverPowermandatory When enabled, Dynamic Power Favor Performance Over Power supports a max performance mode that pushes the system past its nominal CPU frequency when CPU and memory utilization implies it would help and the system allows …	Enumerationr/w	.1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.8
bladeDetailsPowerControlmandatory This object is used to get or set the power control setting on a blade. If dynamic power mgmt is not supported on a blade, notApplicable(255) will be returned. This will set the power cont…	Enumerationr/w	.1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.9

Table of Blade Module Power Trending Information.

bladePowerTrendingSampleEntry row .1.3.6.1.4.1.2.3.51.2.2.10.4.1.3.10.1

Blade Module Power Trending Sample entry.

Indexes

No indexes recorded

Column	Syntax	OID
bladePowerTrendingSampleIndexmandatory Blade Module Power Trending Sample Table Index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.4.1.3.10.1.1
bladePowerTrendingSampleIdmandatory Blade Module Power Trending Sample Table Blade Id.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.4.1.3.10.1.2
bladePowerTrendingSampleTimeStampmandatory Blade Module Power Trending Sample Table Timestamp.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.4.1.3.10.1.3
bladePowerTrendingSampleMaxmandatory Blade Module Power Trending Sample Table Maximum Power.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.4.1.3.10.1.4
bladePowerTrendingSampleMinmandatory Blade Module Power Trending Sample Table Minimum Power.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.4.1.3.10.1.5
bladePowerTrendingSampleAvemandatory Blade Module Power Trending Sample Table Average Power.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.4.1.3.10.1.6

Table of Switch Module Power Trending Information.

switchPowerTrendingSampleEntry row .1.3.6.1.4.1.2.3.51.2.2.10.4.2.3.10.1

Switch Module Power Trending Sample entry.

Indexes

No indexes recorded

Column	Syntax	OID
switchPowerTrendingSampleIndexmandatory Switch Module Power Trending Sample Table Index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.4.2.3.10.1.1
switchPowerTrendingSampleIdmandatory Switch Module Power Trending Sample Table Switch Id.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.4.2.3.10.1.2
switchPowerTrendingSampleTimeStampmandatory Switch Module Power Trending Sample Table Timestamp.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.4.2.3.10.1.3
switchPowerTrendingSampleMaxmandatory Switch Module Power Trending Sample Table Maximum Power.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.4.2.3.10.1.4
switchPowerTrendingSampleMinmandatory Switch Module Power Trending Sample Table Minimum Power.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.4.2.3.10.1.5
switchPowerTrendingSampleAvemandatory Switch Module Power Trending Sample Table Average Power.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.4.2.3.10.1.6

Table of Blower Module Power Trending Information.
          
NOTE: Blowers are also referred to as Chassis Cooling Devices.

blowerPowerTrendingSampleEntry row .1.3.6.1.4.1.2.3.51.2.2.10.4.3.3.10.1

Blower Module Power Trending Sample entry.

Indexes

No indexes recorded

Column	Syntax	OID
blowerPowerTrendingSampleIndexmandatory Blower Module Power Trending Sample Table Index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.4.3.3.10.1.1
blowerPowerTrendingSampleIdmandatory Blower Module Power Trending Sample Table Blower Id.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.4.3.3.10.1.2
blowerPowerTrendingSampleTimeStampmandatory Blower Module Power Trending Sample Table Timestamp.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.4.3.3.10.1.3
blowerPowerTrendingSampleMaxmandatory Blower Module Power Trending Sample Table Maximum Power.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.4.3.3.10.1.4
blowerPowerTrendingSampleMinmandatory Blower Module Power Trending Sample Table Minimum Power.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.4.3.3.10.1.5
blowerPowerTrendingSampleAvemandatory Blower Module Power Trending Sample Table Average Power.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.4.3.3.10.1.6

Table of Chassis Power Trending Sample Information in specified time period.

chassisPowerTrendingSampleEntry row .1.3.6.1.4.1.2.3.51.2.2.10.5.3.10.1

Chassis Power Trending Sample entry in specified time period.

Indexes

No indexes recorded

Column	Syntax	OID
chassisPowerTrendingSampleIndexmandatory Chassis Power Trending Sample Index in specified time period.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.5.3.10.1.1
chassisPowerTrendingSampleTimeStampmandatory Chassis Power Trending Sample Timestamp in specified time period.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.5.3.10.1.2
chassisPowerTrendingSampleAvemandatory Chassis Power Trending Sample Average Power in specified time period.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.5.3.10.1.3

Table of Media Tray 1 Thermal Trending Information.

mt1ThermalTrendingEntry row .1.3.6.1.4.1.2.3.51.2.2.10.5.5.10.1

Media Tray 1 Thermal Trending entry.

Indexes

No indexes recorded

Column	Syntax	OID
mt1ThermalTrendingIndexmandatory Media Tray 1 Thermal Trending Table Index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.5.5.10.1.1
mt1ThermalTrendingTimeStampmandatory Media Tray 1 Thermal Trending Table Sample Timestamp.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.5.5.10.1.2
mt1ThermalTrendingTemperaturemandatory Media Tray 1 Thermal Trending Table Temperature.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.5.5.10.1.3

Table of Media Tray 2 Thermal Trending Information.
          
NOTE: This MIB object is for BladeCenter HT only.

mt2ThermalTrendingEntry row .1.3.6.1.4.1.2.3.51.2.2.10.5.5.15.1

Media Tray 2 Thermal Trending entry.

NOTE: This MIB object is for BladeCenter HT only.

Indexes

No indexes recorded

Column	Syntax	OID
mt2ThermalTrendingIndexmandatory Media Tray 2 Thermal Trending Table Index. NOTE: This MIB object is for BladeCenter HT only.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.5.5.15.1.1
mt2ThermalTrendingTimeStampmandatory Media Tray 2 Thermal Trending Table Sample Timestamp. NOTE: This MIB object is for BladeCenter HT only.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.5.5.15.1.2
mt2ThermalTrendingTemperaturemandatory Media Tray 2 Thermal Trending Table Temperature. NOTE: This MIB object is for BladeCenter HT only.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.5.5.15.1.3

Table of Blower 1 Thermal Trending Information.
          
NOTE: Blowers are also referred to as Chassis Cooling Devices.

blower1ThermalTrendingEntry row .1.3.6.1.4.1.2.3.51.2.2.10.5.5.20.1

Blower 1 Thermal Trending entry.

Indexes

No indexes recorded

Column	Syntax	OID
blower1ThermalTrendingIndexmandatory Blower 1 Thermal Trending Table Index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.5.5.20.1.1
blower1ThermalTrendingTimeStampmandatory Blower 1 Thermal Trending Table Sample Timestamp.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.5.5.20.1.2
blower1ThermalTrendingTemperaturemandatory Blower 1 Thermal Trending Table Temperature.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.5.5.20.1.3

Table of Blower 2 Thermal Trending Information.
          
NOTE: Blowers are also referred to as Chassis Cooling Devices.

blower2ThermalTrendingEntry row .1.3.6.1.4.1.2.3.51.2.2.10.5.5.30.1

Blower Thermal 2 Trending entry.

Indexes

No indexes recorded

Column	Syntax	OID
blower2ThermalTrendingIndexmandatory Blower 2 Thermal Trending Table Index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.5.5.30.1.1
blower2ThermalTrendingTimeStampmandatory Blower 2 Thermal Trending Table Sample Timestamp.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.5.5.30.1.2
blower2ThermalTrendingTemperaturemandatory Blower 2 Thermal Trending Table Temperature.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.5.5.30.1.3

Table of Blower 3 Thermal Trending Information.
          
NOTE: This MIB object is for BladeCenter T only.
NOTE: Blowers are also referred to as Chassis Cooling Devices.

blower3ThermalTrendingEntry row .1.3.6.1.4.1.2.3.51.2.2.10.5.5.40.1

Blower 3 Thermal Trending entry.

NOTE: This MIB object is for BladeCenter T only.

Indexes

No indexes recorded

Column	Syntax	OID
blower3ThermalTrendingIndexmandatory Blower 3 Thermal Trending Table Index. NOTE: This MIB object is for BladeCenter T only.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.5.5.40.1.1
blower3ThermalTrendingTimeStampmandatory Blower 3 Thermal Trending Table Sample Timestamp. NOTE: This MIB object is for BladeCenter T only.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.5.5.40.1.2
blower3ThermalTrendingTemperaturemandatory Blower 3 Thermal Trending Table Temperature. NOTE: This MIB object is for BladeCenter T only.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.5.5.40.1.3

Table of Blower 4 Thermal Trending Information.
          
NOTE: This MIB object is for BladeCenter T only.

blower4ThermalTrendingEntry row .1.3.6.1.4.1.2.3.51.2.2.10.5.5.50.1

Blower 4 Thermal Trending entry.

NOTE: This MIB object is for BladeCenter T only.
NOTE: Blowers are also referred to as Chassis Cooling Devices.

Indexes

No indexes recorded

Column	Syntax	OID
blower4ThermalTrendingIndexmandatory Blower 4 Thermal Trending Table Index. NOTE: This MIB object is for BladeCenter T only.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.5.5.50.1.1
blower4ThermalTrendingTimeStampmandatory Blower 4 Thermal Trending Table Sample Timestamp. NOTE: This MIB object is for BladeCenter T only.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.5.5.50.1.2
blower4ThermalTrendingTemperaturemandatory Blower 4 Thermal Trending Table Temperature. NOTE: This MIB object is for BladeCenter T only.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.5.5.50.1.3

Table of Power Policy information for all power domains. Reading this
table can tell you about the available power policies that can be
configured for a domain and also which is currently selected. The
powerPolicyActivate object can also be SET to select which policy
should be active for a given power domain.

powerPolicyEntry row .1.3.6.1.4.1.2.3.51.2.2.10.6.1.1

Power Policy Entry

Indexes

No indexes recorded

Column	Syntax	OID
powerPolicyIndexmandatory The unique idenitifier of a row in the powerPolicyTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.6.1.1.1
powerPolicyPowerDomainNumbermandatory The power domain number which this row is associated with.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.10.6.1.1.2
powerPolicyNamemandatory The short name of the power policy. The following are the possible names and their detailed description: Power Module Redundancy Intended for a single AC power source into the chassis where e…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.10.6.1.1.3
powerPolicyPwrSupplyFailureLimitmandatory The maximum number of power supplies that can fail in a chassis while still providing redundancy.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.6.1.1.4
powerPolicyMaxPowerLimitmandatory The maximum power available (in watts), based on the number of power modules and the Power Management Policy setting.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.6.1.1.5
powerPolicyEstimatedUtilizationmandatory The estimated utilization (as a percentage) based on current power usage.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.10.6.1.1.6
powerPolicyActivatemandatory When read, this object provides the status of this power policy. If the value is enabled(1), it means this is the active power policy for the associated domain. When set to a value of enabled(1), the power policy will b…	Enumerationr/w	.1.3.6.1.4.1.2.3.51.2.2.10.6.1.1.7

Table of MM users currently logged in.
          
NOTE: This MIB object is for AMM only.

currentlyLoggedInEntry row .1.3.6.1.4.1.2.3.51.2.2.17.1.1.1

MM users currently logged in entries.

NOTE: This MIB object is for AMM only.

Indexes

No indexes recorded

Column	Syntax	OID
currentlyLoggedInEntryIndexmandatory Index for MM users currently logged in.	Integer32	.1.3.6.1.4.1.2.3.51.2.2.17.1.1.1.1
currentlyLoggedInEntryUserIdmandatory Name for MM users currently logged in. NOTE: 'Default SNMPv1 user' indicates an internal user used by SNMPv1 agent.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.17.1.1.1.2
currentlyLoggedInEntryAccMethodmandatory Access method for MM users currently logged in.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.17.1.1.1.3

Table of voltage threshold entries.
          
NOTE: This MIB object is for BladeCenter only.

voltageThresholdsEntry row .1.3.6.1.4.1.2.3.51.2.2.20.2.1.1

Voltage threshold entries.

NOTE: This MIB object is for BladeCenter only.

Indexes

No indexes recorded

Column	Syntax	OID
voltageThresholdEntryIndexmandatory Index for voltage threshold entry.	Integer32	.1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.1
voltageThresholdEntryNamemandatory Voltage threshold entry null terminated string that contains the power supply's name, for example '+5V'.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.2
voltageThresholdEntryCurrentValuemandatory Voltage reading expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Read…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.3
voltageThresholdEntryWarningHighValuemandatory Voltage threshold reading expressed in Volts(V). If the voltage rises above this value, a warning alert/event, if enabled, will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for neg…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.6
voltageThresholdEntryWarningResetHighValuemandatory Voltage threshold reading expressed in Volts(V). If the voltage rises above this value and if a warning alert/event had previously been created, then the alert/event will be reset. An octet string expressed as 'sdd.dd V…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.7
voltageThresholdEntryWarningLowValuemandatory Voltage threshold reading expressed in Volts(V). If the voltage drops below this value, a warning alert/event, if enabled, will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for neg…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.10
voltageThresholdEntryWarningResetLowValuemandatory Voltage threshold reading expressed in Volts(V). If the voltage drops below this value and if a warning alert/event had previously been created, then the alert/event will be reset. An octet string expressed as 'sdd.dd V…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.11

Table of the management module hardware components.
For consistent results, view as a table and not as individual entries.

mmHardwareVpdEntry row .1.3.6.1.4.1.2.3.51.2.2.21.2.1.1

Management module hardware VPD entry.
For consistent results, view as a table and not as individual entries.

Indexes

No indexes recorded

Column	Syntax	OID
mmHardwareVpdIndexmandatory Management module hardware VPD index. For consistent results, view as a table and not as individual entries.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.1
mmHardwareVpdBayNumbermandatory Management module hardware VPD Bay number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.2
mmHardwareVpdManufacturingIdmandatory Management module hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.3
mmHardwareVpdFruNumbermandatory Management module hardware VPD FRU number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.4
mmHardwareVpdHardwareRevisionmandatory Management module hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed in the OEM VPD area for this component, then the HardwareRevi…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.5
mmHardwareVpdUuidmandatory Management module hardware VPD UUID. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.6
mmHardwareVpdManufDatemandatory Management module hardware VPD manufacture date. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.7
mmHardwareVpdPartNumbermandatory Management module hardware VPD Part number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.8
mmHardwareVpdFruSerialmandatory Management module hardware VPD FRU serial number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.9
mmHardwareVpdManufacturingIDNumbermandatory Management module hardware VPD manufacturer ID Number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.10
mmHardwareVpdProductIdmandatory Management module hardware VPD product ID. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.11
mmHardwareVpdSubManufacturerIdmandatory Management module hardware VPD subsystem manufacturer. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.12
mmHardwareVpdCleimandatory Management module hardware VPD Common Language Equipment Identification (CLEI). For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.13
mmHardwareVpdHardwareRevisionStringmandatory Management module hardware VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed in the OEM VPD area for this component, then…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.14

Table of the management module interposer hardware components.
For consistent results, view as a table and not as individual entries.
          
NOTE: This MIB object is for BladeCenter HT only.

mmInpHardwareVpdEntry row .1.3.6.1.4.1.2.3.51.2.2.21.2.2.1

Management module Interposer hardware VPD entry.
For consistent results, view as a table and not as individual entries.

NOTE: This MIB object is for BladeCenter HT only.

Indexes

No indexes recorded

Column	Syntax	OID
mmInpHardwareVpdIndexmandatory Management module Interposer hardware VPD index. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT only.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.1
mmInpHardwareVpdBayNumbermandatory Management module Interposer hardware VPD Bay number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT only.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.2
mmInpHardwareVpdManufacturingIdmandatory Management module Interposer hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT only.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.3
mmInpHardwareVpdFruNumbermandatory Management module Interposer hardware VPD FRU number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT only.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.4
mmInpHardwareVpdHardwareRevisionmandatory Management module Interposer hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT only. If a hardware re…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.5
mmInpHardwareVpdUuidmandatory Management module Interposer hardware VPD UUID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT only.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.6
mmInpHardwareVpdManufDatemandatory Management module Interposer hardware VPD manufacture date. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT only.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.7
mmInpHardwareVpdPartNumbermandatory Management module Interposer hardware VPD Part number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT only.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.8
mmInpHardwareVpdFruSerialmandatory Management module Interposer hardware VPD FRU serial number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT only.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.9
mmInpHardwareVpdManufacturingIDNumbermandatory Management module Interposer hardware VPD manufacturer ID Number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.10
mmInpHardwareVpdProductIdmandatory Management module Interposer hardware VPD product ID. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.11
mmInpHardwareVpdSubManufacturerIdmandatory Management module Interposer hardware VPD subsystem manufacturer. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.12
mmInpHardwareVpdCleimandatory Management module Interposer hardware VPD Common Language Equipment Identification (CLEI). For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.13
mmInpHardwareVpdHardwareRevisionStringmandatory Management module Interposer hardware VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT only. …	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.14

Table of MM Firmware VPD.

mmMainApplVpdEntry row .1.3.6.1.4.1.2.3.51.2.2.21.3.1.1

MM Firmware VPD entry.

Indexes

No indexes recorded

Column	Syntax	OID
mmMainApplVpdIndexmandatory Firmware VPD index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.21.3.1.1.1
mmMainApplVpdNamemandatory Firmware VPD name description. 'AMM firmware' indicates the running firmware of the MM. 'AMM firmware (pending restart)' indicates the flashed firmware of the MM which will become active after the next restart.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.1.1.2
mmMainApplVpdBuildIdmandatory Firmware VPD build identification.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.1.1.3
mmMainApplVpdRevisonNumbermandatory Firmware VPD revision number.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.1.1.4
mmMainApplVpdFilenamemandatory Firmware VPD file name.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.1.1.5
mmMainApplVpdBuildDatemandatory Firmware VPD build date.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.1.1.6

Table of MM Firmware VPD.
          
NOTE: This MIB object is for MM only.
NOTE: This table is deprecated and no longer supported.

mmBootROMVpdEntry row .1.3.6.1.4.1.2.3.51.2.2.21.3.2.1

MM Firmware VPD entry.

NOTE: This MIB object is for MM only.
NOTE: This table is deprecated and no longer supported.

Indexes

No indexes recorded

Column	Syntax	OID
mmBootROMVpdIndexobsolete Firmware VPD index. NOTE: This MIB object is for MM only. NOTE: This Mib object is deprecated and no longer supported.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.21.3.2.1.1
mmBootROMVpdNameobsolete Firmware VPD name description. NOTE: This MIB object is for MM only. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.2.1.2
mmBootROMVpdBuildIdobsolete Firmware VPD build identification. NOTE: This MIB object is for MM only. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.2.1.3
mmBootROMVpdRevisonNumberobsolete Firmware VPD revision number. NOTE: This MIB object is for MM only. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.2.1.4
mmBootROMVpdFilenameobsolete Firmware VPD file name. NOTE: This MIB object is for MM only. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.2.1.5
mmBootROMVpdBuildDateobsolete Firmware VPD build date. NOTE: This MIB object is for MM only. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.2.1.6

Table of MM Firmware VPD.
NOTE: This MIB object is for MM only.
NOTE: This table is deprecated and no longer supported.

mmRemoteControlVpdEntry row .1.3.6.1.4.1.2.3.51.2.2.21.3.3.1

MM Firmware VPD entry.

NOTE: This table is deprecated and no longer supported.

Indexes

No indexes recorded

Column	Syntax	OID
mmRemoteControlVpdIndexobsolete Firmware VPD index. NOTE: This Mib object is deprecated and no longer supported.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.21.3.3.1.1
mmRemoteControlVpdNameobsolete Firmware VPD name description. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.3.1.2
mmRemoteControlVpdBuildIdobsolete Firmware VPD build identification. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.3.1.3
mmRemoteControlVpdRevisonNumberobsolete Firmware VPD revision number. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.3.1.4
mmRemoteControlVpdFilenameobsolete Firmware VPD file name. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.3.1.5
mmRemoteControlVpdBuildDateobsolete Firmware VPD build date. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.3.1.6

Table of MM Firmware VPD.
NOTE: This MIB object is for MM only.
NOTE: This table is deprecated and no longer supported.

mmPS2toUSBConvVpdEntry row .1.3.6.1.4.1.2.3.51.2.2.21.3.4.1

MM Firmware VPD entry.
NOTE: This table is deprecated and no longer supported.

Indexes

No indexes recorded

Column	Syntax	OID
mmPS2toUSBConvVpdIndexobsolete Firmware VPD index. NOTE: This Mib object is deprecated and no longer supported.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.21.3.4.1.1
mmPS2toUSBConvVpdNameobsolete Firmware VPD name description. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.4.1.2
mmPS2toUSBConvVpdBuildIdobsolete Firmware VPD build identification. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.4.1.3
mmPS2toUSBConvVpdRevisonNumberobsolete Firmware VPD revision number. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.4.1.4
mmPS2toUSBConvVpdFilenameobsolete Firmware VPD file name. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.4.1.5
mmPS2toUSBConvVpdBuildDateobsolete Firmware VPD build date. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.4.1.6

Table of MM Firmware VPD.
NOTE: This MIB object is for MM only.
NOTE: This table is deprecated and no longer supported.

mmToUSBIntfVpdEntry row .1.3.6.1.4.1.2.3.51.2.2.21.3.5.1

MM Firmware VPD entry.

NOTE: This table is deprecated and no longer supported.

Indexes

No indexes recorded

Column	Syntax	OID
mmToUSBIntfVpdIndexobsolete Firmware VPD index. NOTE: This Mib object is deprecated and no longer supported.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.21.3.5.1.1
mmToUSBIntfVpdNameobsolete Firmware VPD name description. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.5.1.2
mmToUSBIntfVpdBuildIdobsolete Firmware VPD build identification. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.5.1.3
mmToUSBIntfVpdRevisonNumberobsolete Firmware VPD revision number. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.5.1.4
mmToUSBIntfVpdFilenameobsolete Firmware VPD file name. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.5.1.5
mmToUSBIntfVpdBuildDateobsolete Firmware VPD build date. NOTE: This Mib object is deprecated and no longer supported.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.3.5.1.6

Table of VPD information for the blade hardware components.
For consistent results, view as a table and not as individual entries.

bladeHardwareVpdEntry row .1.3.6.1.4.1.2.3.51.2.2.21.4.1.1

Blade hardware VPD entry.
For consistent results, view as a table and not as individual entries.

Indexes

No indexes recorded

Column	Syntax	OID
bladeHardwareVpdIndexmandatory Blade hardware VPD index. For consistent results, view as a table and not as individual entries.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.1
bladeHardwareVpdBayNumbermandatory Blade hardware VPD Bay number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.2
bladeHardwareVpdManufacturingIdmandatory Blade hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.3
bladeHardwareVpdFruNumbermandatory Blade hardware VPD FRU number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.4
bladeHardwareVpdHardwareRevisionmandatory Blade hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed in the OEM VPD area for this component, then the HardwareRevisionString v…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.5
bladeHardwareVpdSerialNumbermandatory Blade hardware VPD serial number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.6
bladeHardwareVpdMachineTypemandatory Blade hardware VPD machine type. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.7
bladeHardwareVpdUuidmandatory Blade hardware VPD UUID. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.8
bladeHardwareVpdManufDatemandatory Blade hardware VPD Manufacture Date. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.9
bladeHardwareVpdPartNumbermandatory Blade hardware VPD Part number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.10
bladeHardwareVpdFruSerialmandatory Blade hardware VPD FRU serial number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.11
bladeHardwareVpdMachineModelmandatory Blade hardware VPD machine model. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.12
bladeHardwareVpdManufacturingIDNumbermandatory Blade hardware VPD Manufacturer ID Number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.13
bladeHardwareVpdProductIdmandatory Blade hardware VPD product ID. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.14
bladeHardwareVpdSubManufacturerIdmandatory Blade hardware VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.15
bladeHardwareVpdCleimandatory Blade hardware VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.16
bladeHardwareVpdHardwareRevisionStringmandatory Blade hardware VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed in the OEM VPD area for this component, then this MIB ob…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.17
bladeDaughterVpdCardTypemandatory Blade expansion card (daughter card) VPD type. For consistent results, view as a table and not as individual entries.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.20
bladeDaughterVpdManufacturingIdmandatory Blade expansion card (daughter card) VPD manufacturing ID. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.21
bladeDaughterVpdFruNumbermandatory Blade expansion card (daughter card) VPD FRU number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.22
bladeDaughterVpdHardwareRevisionmandatory Blade expansion card (daughter card) VPD hardware revision. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed in the OEM VPD area for this component, then the Ha…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.23
bladeDaughterVpdSerialNumbermandatory Blade expansion card (daughter card) VPD Serial number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.24
bladeDaughterVpdMachineTypemandatory Blade expansion card (daughter card) VPD Machine type. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.25
bladeDaughterVpdUuidmandatory Blade expansion card (daughter card) VPD UUID. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.26
bladeDaughterVpdManufDatemandatory Blade expansion card (daughter card) VPD Manufacture date. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.27
bladeDaughterVpdPartNumbermandatory Blade expansion card (daughter card) VPD Part number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.28
bladeDaughterVpdFruSerialmandatory Blade expansion card (daughter card) VPD FRU Serial. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.29
bladeDaughterVpdManufacturingIDNumbermandatory Blade expansion card (daughter card) VPD manufacturer ID Number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.30
bladeDaughterVpdProductIdmandatory Blade expansion card (daughter card) VPD product ID. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.31
bladeDaughterVpdSubManufacturerIdmandatory Blade expansion card (daughter card) VPD subsystem manufacturing ID. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.32
bladeDaughterVpdCleimandatory Blade expansion card (daughter card) VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.33
bladeDaughterVpdHardwareRevisionStringmandatory Blade expansion card (daughter card) VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed in the OEM VPD area for this compo…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.34

Table of MAC addresses of the blade and its expansion cards (daughter cards).
For consistent results, view as a table and not as individual entries.

bladeMACAddressVpdEntry row .1.3.6.1.4.1.2.3.51.2.2.21.4.2.1

Blade MAC address entry.
For consistent results, view as a table and not as individual entries.

Indexes

No indexes recorded

Column	Syntax	OID
bladeMACAddressVpdIndexmandatory Blade index. For consistent results, view as a table and not as individual entries.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.1
bladeMACAddress1Vpdmandatory Blade MAC address 1. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.2
bladeMACAddress2Vpdmandatory Blade MAC address 2. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.3
bladeMACAddress3Vpdmandatory Blade MAC address 3. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.4
bladeMACAddress4Vpdmandatory Blade MAC address 4. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.5
bladeMACAddress5Vpdmandatory Blade MAC address 5. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.6
bladeMACAddress6Vpdmandatory Blade MAC address 6. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.7
bladeMACAddress7Vpdmandatory Blade MAC address 7. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.8
bladeMACAddress8Vpdmandatory Blade MAC address 8. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.9
bladeDaughterCard1MACAddress1Vpdmandatory Blade expansion card (daughter card) 1 MAC address 1. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.10
bladeDaughterCard1MACAddress2Vpdmandatory Blade expansion card (daughter card) 1 MAC address 2. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.11
bladeDaughterCard1MACAddress3Vpdmandatory Blade expansion card (daughter card) 1 MAC address 3. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.12
bladeDaughterCard1MACAddress4Vpdmandatory Blade expansion card (daughter card) 1 MAC address 4. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.13
bladeDaughterCard1MACAddress5Vpdmandatory Blade expansion card (daughter card) 1 MAC address 5. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.14
bladeDaughterCard1MACAddress6Vpdmandatory Blade expansion card (daughter card) 1 MAC address 6. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.15
bladeDaughterCard1MACAddress7Vpdmandatory Blade expansion card (daughter card) 1 MAC address 7. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.16
bladeDaughterCard1MACAddress8Vpdmandatory Blade expansion card (daughter card) 1 MAC address 8. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.17
bladeDaughterCard2MACAddress1Vpdmandatory Blade expansion card (daughter card) 2 MAC address 1. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.18
bladeDaughterCard2MACAddress2Vpdmandatory Blade expansion card (daughter card) 2 MAC address 2. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.19
bladeDaughterCard2MACAddress3Vpdmandatory Blade expansion card (daughter card) 2 MAC address 3. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.20
bladeDaughterCard2MACAddress4Vpdmandatory Blade expansion card (daughter card) 2 MAC address 4. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.21
bladeDaughterCard2MACAddress5Vpdmandatory Blade expansion card (daughter card) 2 MAC address 5. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.22
bladeDaughterCard2MACAddress6Vpdmandatory Blade expansion card (daughter card) 2 MAC address 6. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.23
bladeDaughterCard2MACAddress7Vpdmandatory Blade expansion card (daughter card) 2 MAC address 7. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.24
bladeDaughterCard2MACAddress8Vpdmandatory Blade expansion card (daughter card) 2 MAC address 8. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.25
bladeDaughterCard3MACAddress1Vpdmandatory Blade expansion card (daughter card) 3 MAC address 1. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.26
bladeDaughterCard3MACAddress2Vpdmandatory Blade expansion card (daughter card) 3 MAC address 2. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.27
bladeDaughterCard3MACAddress3Vpdmandatory Blade expansion card (daughter card) 3 MAC address 3. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.28
bladeDaughterCard3MACAddress4Vpdmandatory Blade expansion card (daughter card) 3 MAC address 4. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.29
bladeDaughterCard3MACAddress5Vpdmandatory Blade expansion card (daughter card) 3 MAC address 5. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.30
bladeDaughterCard3MACAddress6Vpdmandatory Blade expansion card (daughter card) 3 MAC address 6. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.31
bladeDaughterCard3MACAddress7Vpdmandatory Blade expansion card (daughter card) 3 MAC address 7. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.32
bladeDaughterCard3MACAddress8Vpdmandatory Blade expansion card (daughter card) 3 MAC address 8. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.33
bladeDaughterCard4MACAddress1Vpdmandatory Blade expansion card (daughter card) 4 MAC address 1. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.34
bladeDaughterCard4MACAddress2Vpdmandatory Blade expansion card (daughter card) 4 MAC address 2. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.35
bladeDaughterCard4MACAddress3Vpdmandatory Blade expansion card (daughter card) 4 MAC address 3. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.36
bladeDaughterCard4MACAddress4Vpdmandatory Blade expansion card (daughter card) 4 MAC address 4. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.37
bladeDaughterCard4MACAddress5Vpdmandatory Blade expansion card (daughter card) 4 MAC address 5. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.38
bladeDaughterCard4MACAddress6Vpdmandatory Blade expansion card (daughter card) 4 MAC address 6. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.39
bladeDaughterCard4MACAddress7Vpdmandatory Blade expansion card (daughter card) 4 MAC address 7. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.40
bladeDaughterCard4MACAddress8Vpdmandatory Blade expansion card (daughter card) 4 MAC address 8. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.41
bladeDaughterCard5MACAddress1Vpdmandatory Blade expansion card (daughter card) 5 MAC address 1. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.42
bladeDaughterCard5MACAddress2Vpdmandatory Blade expansion card (daughter card) 5 MAC address 2. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.43
bladeDaughterCard5MACAddress3Vpdmandatory Blade expansion card (daughter card) 5 MAC address 3. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.44
bladeDaughterCard5MACAddress4Vpdmandatory Blade expansion card (daughter card) 5 MAC address 4. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.45
bladeDaughterCard5MACAddress5Vpdmandatory Blade expansion card (daughter card) 5 MAC address 5. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.46
bladeDaughterCard5MACAddress6Vpdmandatory Blade expansion card (daughter card) 5 MAC address 6. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.47
bladeDaughterCard5MACAddress7Vpdmandatory Blade expansion card (daughter card) 5 MAC address 7. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.48
bladeDaughterCard5MACAddress8Vpdmandatory Blade expansion card (daughter card) 5 MAC address 8. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.49
bladeHSDaughterCard1MACAddress1Vpdmandatory Blade high speed expansion card (daughter card) 1 MAC address 1. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.100
bladeHSDaughterCard1MACAddress2Vpdmandatory Blade high speed expansion card (daughter card) 1 MAC address 2. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.101
bladeHSDaughterCard1MACAddress3Vpdmandatory Blade high speed expansion card (daughter card) 1 MAC address 3. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.102
bladeHSDaughterCard1MACAddress4Vpdmandatory Blade high speed expansion card (daughter card) 1 MAC address 4. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.103
bladeHSDaughterCard1MACAddress5Vpdmandatory Blade high speed expansion card (daughter card) 1 MAC address 5. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.104
bladeHSDaughterCard1MACAddress6Vpdmandatory Blade high speed expansion card (daughter card) 1 MAC address 6. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.105
bladeHSDaughterCard1MACAddress7Vpdmandatory Blade high speed expansion card (daughter card) 1 MAC address 7. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.106
bladeHSDaughterCard1MACAddress8Vpdmandatory Blade high speed expansion card (daughter card) 1 MAC address 8. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.107
bladeHSDaughterCard1MACAddress9Vpdmandatory Blade high speed expansion card (daughter card) 1 MAC address 9. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.108
bladeHSDaughterCard1MACAddress10Vpdmandatory Blade high speed expansion card (daughter card) 1 MAC address 10. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.109
bladeHSDaughterCard1MACAddress11Vpdmandatory Blade high speed expansion card (daughter card) 1 MAC address 11. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.110
bladeHSDaughterCard1MACAddress12Vpdmandatory Blade high speed expansion card (daughter card) 1 MAC address 12. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.111
bladeHSDaughterCard1MACAddress13Vpdmandatory Blade high speed expansion card (daughter card) 1 MAC address 13. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.112
bladeHSDaughterCard1MACAddress14Vpdmandatory Blade high speed expansion card (daughter card) 1 MAC address 14. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.113
bladeHSDaughterCard1MACAddress15Vpdmandatory Blade high speed expansion card (daughter card) 1 MAC address 15. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.114
bladeHSDaughterCard1MACAddress16Vpdmandatory Blade high speed expansion card (daughter card) 1 MAC address 16. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.115
bladeSideCardMACAddress1Vpdmandatory Blade side card MAC address 1. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.164
bladeSideCardMACAddress2Vpdmandatory Blade side card MAC address 2. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.165
bladeSideCardMACAddress3Vpdmandatory Blade side card MAC address 3. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.166
bladeSideCardMACAddress4Vpdmandatory Blade side card MAC address 4. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.167
bladeSideCardMACAddress5Vpdmandatory Blade side card MAC address 5. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.168
bladeSideCardMACAddress6Vpdmandatory Blade side card MAC address 6. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.169
bladeSideCardMACAddress7Vpdmandatory Blade side card MAC address 7. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.170
bladeSideCardMACAddress8Vpdmandatory Blade side card MAC address 8. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.171

Table of VPD information for the blade expansion board components.
For consistent results, view as a table and not as individual entries.

bladeExpBoardVpdEntry row .1.3.6.1.4.1.2.3.51.2.2.21.4.3.1

Blade expansion board VPD entry.
For consistent results, view as a table and not as individual entries.

Indexes

No indexes recorded

Column	Syntax	OID
bladeExpBoardVpdIndexmandatory Blade expansion board VPD index. For consistent results, view as a table and not as individual entries.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.1
bladeExpBoardVpdBayNumbermandatory Blade expansion board VPD Bay number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.2
bladeExpBoardVpdManufacturingIdmandatory Blade expansion board VPD manufacturing ID. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.3
bladeExpBoardVpdFruNumbermandatory Blade expansion board VPD FRU number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.4
bladeExpBoardVpdHardwareRevisionmandatory Blade expansion board VPD hardware revision. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed in the OEM VPD area for this component, then the HardwareRevisionS…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.5
bladeExpBoardVpdSerialNumbermandatory Blade expansion board VPD serial number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.6
bladeExpBoardVpdMachineTypemandatory Blade expansion board VPD machine type. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.7
bladeExpBoardVpdUuidmandatory Blade expansion board VPD UUID. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.8
bladeExpBoardVpdManufDatemandatory Blade expansion board VPD Manufacture Date. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.9
bladeExpBoardVpdPartNumbermandatory Blade expansion board VPD Part number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.10
bladeExpBoardVpdFruSerialmandatory Blade expansion board VPD FRU serial number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.11
bladeExpBoardVpdMachineModelmandatory Blade expansion board VPD machine model. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.12
bladeExpBoardVpdManufacturingIDNumbermandatory Blade expansion board VPD Manufacturer ID Number. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.13
bladeExpBoardVpdProductIdmandatory Blade expansion board VPD Product ID. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.14
bladeExpBoardVpdSubManufacturerIdmandatory Blade expansion board VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.15
bladeExpBoardVpdCleimandatory Blade expansion board VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.16
bladeExpBoardVpdBladeBayNumbermandatory Blade bay number of the blade expansion board. For consistent results, view as a table and not as individual entries.	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.19
bladeExpBoardVpdCardTypemandatory Blade expansion board VPD type. For consistent results, view as a table and not as individual entries.	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.20
bladeExpBoardVpdCardSubTypemandatory Blade expansion board VPD subtype. Describes the expansion board type with more granularity. bse1,bse2,bse3 = Blade Storage Expansion (1st, 2nd, and 3rd Generations), peu1 = PCI Expansion (1st Generation), peu2 = PCI E…	Enumeration	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.21
bladeExpBoardVpdHardwareRevisionStringmandatory Blade expansion board VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed in the OEM VPD area for this component, then this…	OctetString	.1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.22