BINTEC-GPS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

gpsZoneTable

table

.0.68.3 · 1 row entry · 27 columns

Open in standard view

Uses the bintec variant from /opt/observium/mibs/bintec.

Command help

Walk gpsZoneTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BINTEC-GPS-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BINTEC-GPS-MIB::gpsZoneTable'

The (conceptual) table listing GPS zones.

gpsZoneEntry row .0.68.3.1

An entry (conceptual row) representing a GPS zone.
A zone is defined by two points A and B. A is the upper left
point, B the lower right point.

Indexes

gpsZoneIndex

Column Syntax OID

gpsZoneIndex

The index of a GPS location zone.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.0.68.3.1.1

gpsZonePointALongDeg

Value of the degrees for the longitudinal position of point A.
This can vary between 0 and 180.

Integer32r/w

Constraints:
range: 0-180

.0.68.3.1.2

gpsZonePointALongMinInt

Value for the whole part of the longitudinal minutes of point A.
This can vary between 0 and 59.

Integer32r/w

Constraints:
range: 0-59

.0.68.3.1.3

gpsZonePointALongMinDec

Value for the decimal part of the longitudinal minutes of point A.
This can vary between 0 and 9999.

Integer32r/w

Constraints:
range: 0-9999

.0.68.3.1.4

gpsZonePointALongCard

Represents the cardinal point to the longitude where the point is
found. This can take the values East and West.
Default is West.

Enumerationr/w

Enumerated Values:

1	east
2	west

.0.68.3.1.5

gpsZonePointALatDeg

Value of the degrees for the latitudinal position of point A.
This can vary between 0 and 90.

Integer32r/w

Constraints:
range: 0-90

.0.68.3.1.6

gpsZonePointALatMinInt

Value for the whole part of the latitudinal minutes of point A.
This can vary between 0 and 59.

Integer32r/w

Constraints:
range: 0-59

.0.68.3.1.7

gpsZonePointALatMinDec

Value for the decimal part of the latitudinal minutes of point A.
This can vary between 0 and 9999.

Integer32r/w

Constraints:
range: 0-9999

.0.68.3.1.8

gpsZonePointALatCard

Represents the cardinal point to the latitudinal where the point is
found. This can take the values north and south.
Default is north.

Enumerationr/w

Enumerated Values:

1	north
2	south

.0.68.3.1.9

gpsZonePointBLongDeg

Value of the degrees for the longitudinal position of point B.
This can vary between 0 and 180.

Integer32r/w

Constraints:
range: 0-180

.0.68.3.1.10

gpsZonePointBLongMinInt

Value for the whole part of the longitudinal minutes of point B.
This can vary between 0 and 59.

Integer32r/w

Constraints:
range: 0-59

.0.68.3.1.11

gpsZonePointBLongMinDec

Value for the decimal part of the longitudinal minutes of point B.
This can vary between 0 and 9999.

Integer32r/w

Constraints:
range: 0-9999

.0.68.3.1.12

gpsZonePointBLongCard

Represents the cardinal point to the longitude where the point is
found. This can take the values East and West.
Default is West.

Enumerationr/w

Enumerated Values:

1	east
2	west

.0.68.3.1.13

gpsZonePointBLatDeg

Value of the degrees for the latitudinal position of point B.
This can vary between 0 and 90.

Integer32r/w

Constraints:
range: 0-90

.0.68.3.1.14

gpsZonePointBLatMinInt

Value for the whole part of the latitudinal minutes of point B.
This can vary between 0 and 59.

Integer32r/w

Constraints:
range: 0-59

.0.68.3.1.15

gpsZonePointBLatMinDec

Value for the decimal part of the latitudinal minutes of point B.
This can vary between 0 and 9999.

Integer32r/w

Constraints:
range: 0-9999

.0.68.3.1.16

gpsZonePointBLatCard

Represents the cardinal point to the latitudinal where the point is
found. This can take the values north and south.
Default is north.

Enumerationr/w

Enumerated Values:

1	north
2	south

.0.68.3.1.17

gpsZoneTimeToTrue

This object defines the time that must lapse so the zone can pass from
FALSE to TRUE when the device has good GPS coverage. This transition is
invoked as the GPS reveiver passes to being 'inside' the zone.

secondsInteger32r/w

Constraints:
range: 0-1000000

.0.68.3.1.18

gpsZoneTimeToFalse

This object define the time that must laspe so the zone can pass from
TRUE to FALSE when the device has good GPS coverage. This transition is
invoked as the GPS receiver passes to being 'outside' the zone.

secondsInteger32r/w

Constraints:
range: 0-1000000

.0.68.3.1.19

gpsZoneHdop

This object configures the HDOP limit value to take the GPS
information as valid. When the HDOP calculated by the GPS receiver
surpasses the value configured with this parameter, the locking
information is discarded so …

Integer32r/w

Constraints:
range: 2-20

.0.68.3.1.20

gpsZoneRowStatus

The row-status of this GPS zone entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.0.68.3.1.21

gpsZoneValid

This object shows if the current position is in the defined zone
(true) or not (false).

Enumeration

Enumerated Values:

1	true
2	false

.0.68.3.1.22

gpsZoneInitialState

This object defines the state the GPS zone must take when the device is
switched on and there is no GPS signal available.
true: The initial state of the zone is TRUE.
false: The initial state of the zone is FALSE.
true-…

Enumerationr/w

Enumerated Values:

1	true
2	false
3	true-time-false
4	false-time-true

.0.68.3.1.23

gpsZoneInitialStateTime

This object defines the time for state transition defined by InitialState
when the device is switched on and no GPS signal is available.

secondsInteger32r/w

Constraints:
range: 0-1000000

.0.68.3.1.24

gpsZoneCoverageFailState

This object defines the state the GPS zone must take when the GPS receiver
loses coverage or doesn't have enough to accurately calculate the
geographical position.
true: The state of the zone is TRUE.
false: The state o…

Enumerationr/w

Enumerated Values:

1	true
2	false
3	true-time-false
4	false-time-true
5	last-state
6	last-time-false
7	last-time-true

.0.68.3.1.25

gpsZoneCoverageFailStateTime

This object defines the time for state transition defined by
CoverageFailState when no GPS signal is available.

secondsInteger32r/w

Constraints:
range: 0-1000000

.0.68.3.1.26

gpsZoneDescription

A textual string describing this zone.

OctetStringr/w

Constraints:
range: 0-255

.0.68.3.1.27