BIANCA-BRICK-ATM2-MIB Table View

The atmIfTable displays all available ATM capable interfaces.

atmIfEntry row .1.3.6.1.4.1.272.4.16.10.1

An interface entry containing objects at the
subnetwork layer and below for a particular
interface.

Indexes

atmIfIndex

Column	Syntax	OID
atmIfIndexmandatory The interface index of the associated ATM hardware.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.10.1.1
atmIfTypemandatory This object contains an interface type.	Enumeration Enumerated Values: 1 other 2 adsl 3 shdsl 4 vdsl	.1.3.6.1.4.1.272.4.16.10.1.2
atmIfDescrmandatory Short description for this object.		.1.3.6.1.4.1.272.4.16.10.1.3
atmIfAdminStatusmandatory This object contains the desired state of the ATM interface.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.272.4.16.10.1.4
atmIfOperStatusmandatory The current operational state of the ATM interface.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.272.4.16.10.1.5
atmIfLastChangemandatory The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object co…	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.10.1.6
atmIfMaxTxRatemandatory This object enables traffic shaping on the related ATM interface. If set to zero (0) there is no shaping active. Otherwise this variable defines the maximum amount of bits per second to be transmitted. Note that the max…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.10.1.7
atmIfOperModemandatory The current operational mode of the ATM interface. The value atm(1) means ATM is used on the line. The value efm(2) means ATM is used only internally and Ethernet with HDLC framing is used on the line.	Enumeration Enumerated Values: 1 atm 2 efm	.1.3.6.1.4.1.272.4.16.10.1.8
atmIfInPktsmandatory The number of reassembled received packets.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.10.1.22
atmIfOutPktsmandatory This number of transmitted packets.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.10.1.23
atmIfRxSpeedmandatory This object contains the receive interface speed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.10.1.24
atmIfTxSpeedmandatory This object contains the transmit interface speed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.10.1.25
atmIfInOctetsmandatory The total number of octets received on the interface, including framing characters.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.10.1.26
atmIfInDiscardsmandatory The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet cou…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.10.1.27
atmIfInErrorsmandatory The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.10.1.28
atmIfOutOctetsmandatory The total number of octets transmitted out of the interface, including framing characters.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.10.1.29
atmIfOutDiscardsmandatory The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer s…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.10.1.30
atmIfOutErrorsmandatory The number of outbound packets that could not be transmitted because of errors.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.10.1.31

A table of status and parameter information on the virtual
path connections which cross this UNI. There is one entry in
this table for each permanent virtual path connection.
This is the lite version of ATM-FORUM-MIB DEFINITIONS

atmVpcEntry row .1.3.6.1.4.1.272.4.16.11.1

An entry in the table, containing information about a
particular virtual path connection.

Indexes

atmVpcPortIndex atmVpcVpi

Column	Syntax	OID
atmVpcPortIndexmandatory The interface index of the associated ATM hardware.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.11.1.1
atmVpcVpimandatory The VPI value of this Virtual Path Connection.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.272.4.16.11.1.2
atmVpcOperStatusmandatory The present actual operational status of the VPC. A value of end2endUp(2) or end2endDown(3) would be used if the end-to-end status is known. If only local status information is available, a value of localUpEnd2endUnknow…	Enumeration Enumerated Values: 1 unknown 2 end2endUp 3 end2endDown 4 localUpEnd2endUnknown 5 localDown	.1.3.6.1.4.1.272.4.16.11.1.3

A table of status and parameter information on the virtual
channel connections which are visible at this UNI. There is
one entry in this table for each permanent virtual channel
connection, including reserved VCCs that are supported;
e.g., signalling, OAM flows, and ILMI, but not unassigned
cells. This is the lite version of ATM-FORUM-MIB DEFINITIONS

atmVccEntry row .1.3.6.1.4.1.272.4.16.12.1

An entry in the table, containing information about a
particular virtual channel connection.

Indexes

atmVccPortIndex atmVccVpi atmVccVci

Column	Syntax	OID
atmVccPortIndexmandatory The interface index of the associated ATM hardware.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.12.1.1
atmVccVpimandatory The VPI value of this Virtual Channel Connection.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.272.4.16.12.1.2
atmVccVcimandatory The VCI value of this Virtual Channel Connection.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.272.4.16.12.1.3
atmVccOperStatusmandatory The present actual operational status of the VCC. A value of end2endUp(2) or end2endUp(3) is used if the end-to-end status is known. If only local status is known a value of localUpEnd2endUnknown(4) or localDown(5) is u…	Enumeration Enumerated Values: 1 unknown 2 end2endUp 3 end2endDown 4 localUpEnd2endUnknown 5 localDown	.1.3.6.1.4.1.272.4.16.12.1.4

This tables contains all OAM configuration parameters.

atmOamEntry row .1.3.6.1.4.1.272.4.16.13.1

Indexes

atmOamAtmIfIndex atmOamVpi atmOamVci

Column	Syntax	OID
atmOamAtmIfIndexmandatory The interface index of the associated ATM hardware.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.13.1.1
atmOamVpimandatory The VPI value of this Virtual Path/Channel Connection.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.16.13.1.2
atmOamVcimandatory The VCI value of this Virtual Channel Connection.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.272.4.16.13.1.3
atmOamFlowLevelmandatory The OAM hierarchical flow levels : VC (F5) or VP (F4).	Enumerationr/w Enumerated Values: 1 f5 2 f4 10 delete	.1.3.6.1.4.1.272.4.16.13.1.4
atmOamLoopbackEnd2Endmandatory Indicates wether OAM loopback is enabled onto the end-to-end connection.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.272.4.16.13.1.5
atmOamLoopbackSegmentmandatory Indicates wether active OAM loopback is enabled onto the segment connection.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.272.4.16.13.1.6
atmOamLoopbackEnd2EndIntervalmandatory OAM loopback transmit interval (in seconds) for end-to-end context.	Integer32r/w Constraints: range: 0-999	.1.3.6.1.4.1.272.4.16.13.1.7
atmOamLoopbackSegmentIntervalmandatory OAM loopback transmit interval (in seconds) for segment context.	Integer32r/w Constraints: range: 0-999	.1.3.6.1.4.1.272.4.16.13.1.8
atmOamLoopbackEnd2EndMaxPendingmandatory Specifies the maximum number of outstanding OAM loopback responses after which the associated F4/F5 instance will be set into the end-to-end operational down status.	Integer32r/w Constraints: range: 0-999	.1.3.6.1.4.1.272.4.16.13.1.9
atmOamLoopbackSegmentMaxPendingmandatory Specifies the maximum number of outstanding OAM loopback responses after which the associated F4/F5 instance will be set into the segment operational down status.	Integer32r/w Constraints: range: 0-999	.1.3.6.1.4.1.272.4.16.13.1.10
atmOamCCEnd2EndActivationmandatory Determines wether OAM continuity check activation request will be activated and/or accepted for the associated end-to-end connection. If set to passive(1) or both(3) CC activation requests will be confirmed. If set to …	Enumerationr/w Enumerated Values: 1 passive 2 active 3 both 4 no-negotiation 5 none	.1.3.6.1.4.1.272.4.16.13.1.11
atmOamCCSegmentActivationmandatory Determines wether OAM continuity check activation request will be activated and/or accepted for the associated segment connection. If set to passive(1) or both(3) CC activation requests will be confirmed. If set to acti…	Enumerationr/w Enumerated Values: 1 passive 2 active 3 both 4 no-negotiation 5 none	.1.3.6.1.4.1.272.4.16.13.1.12
atmOamCCEnd2EndDirectionmandatory Determines OAM continuity check direction (for end-to-end). If set to sink(1) CC cells will be received only, if set to source(2) CC cells will be generated periodically, if set to both(3) CC cells will be received from…	Enumerationr/w Enumerated Values: 1 sink 2 source 3 both 4 none	.1.3.6.1.4.1.272.4.16.13.1.13
atmOamCCSegmentDirectionmandatory Determines OAM continuity check direction (for segment). If set to sink(1) CC cells will be received only, if set to source(2) CC cells will be generated periodically, if set to both(3) CC cells will be received from th…	Enumerationr/w Enumerated Values: 1 sink 2 source 3 both 4 none	.1.3.6.1.4.1.272.4.16.13.1.14

This tables displays all used VCs.

atmOamStatEntry row .1.3.6.1.4.1.272.4.16.14.1

Indexes

atmOamStatAtmIfIndex atmOamStatVpi atmOamStatVci

Column	Syntax	OID
atmOamStatAtmIfIndexmandatory The interface index of the associated ATM hardware.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.14.1.1
atmOamStatVpimandatory The VPI value of this Virtual Path Connection.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.272.4.16.14.1.2
atmOamStatVcimandatory The VCI value of this Virtual Channel Connection.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.272.4.16.14.1.3
atmOamStatFlowTypemandatory The OAM hierarchical flow levels: see ITU I.610	Enumeration Enumerated Values: 1 f5-segment 2 f5-end2end 3 f4-segment 4 f4-end2end	.1.3.6.1.4.1.272.4.16.14.1.4
atmOamStatLoopbackTxCellsmandatory The number of OAM loopback cells that have been sent to the target in this sequence.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.14.1.6
atmOamStatLoopbackRxCellsmandatory The number of OAM loopback cells that have been received from the target in this sequence.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.14.1.7
atmOamStatLoopbackPendingmandatory The number of currently outstanding OAM loopback responses.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.14.1.8
atmOamStatLoopbackCorrmandatory The correlation of the last sent loopback message.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.14.1.9
atmOamStatAisStatemandatory The AIS state is set to on(2) after receiving an AIS cell or detection of LOC (Loss of Continuity). The Ais state is set to off(1) either when receiving user cells (same VCC context) or via timeout.	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.272.4.16.14.1.10
atmOamStatAisTxCellsmandatory The number of OAM alarm indication signal (AIS) cells that have been transmitted since last change of AisState.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.14.1.11
atmOamStatAisRxCellsmandatory The number of OAM alarm indication signal (AIS) cells that have been received since last change of AisState.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.14.1.12
atmOamStatTotalAisTxCellsmandatory The total number of OAM alarm indication signal (AIS) cells that have been transmitted.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.14.1.13
atmOamStatTotalAisRxCellsmandatory The total number of OAM alarm indication signal (AIS) cells that have been received.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.14.1.14
atmOamStatRdiStatemandatory The RDI state is set to on(2) after receiving a RDI cell. The RDI state is to off(1) via timeout.	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.272.4.16.14.1.15
atmOamStatRdiTxCellsmandatory The number of OAM remote defect indication (RDI) cells that have been transmitted since last change of RdiState.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.14.1.16
atmOamStatRdiRxCellsmandatory The number of OAM remote defect indication (RDI) cells that have been received since last change of RdiState.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.14.1.17
atmOamStatTotalRdiTxCellsmandatory The totoal number of OAM remote defect indication (RDI) cells that have been transmitted.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.14.1.18
atmOamStatTotalRdiRxCellsmandatory The total number of OAM remote defect indication (RDI) cells that have been received.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.14.1.19
atmOamStatCCActivatorStatemandatory The status of the initiated CC negotiation, inactive(1) is the initial status, wait-act-con(2) is set after sending an CC activation request, active(3) is reached after receiving the CC activation confirmation whereas w…	Enumeration Enumerated Values: 1 inactive 2 wait-act-con 3 active 4 wait-deact-con	.1.3.6.1.4.1.272.4.16.14.1.20
atmOamStatCCActivatorDirectionmandatory The direction of action indicated by a received CC activation confirmation, source(1) correlates with 'A-B', sink(2) with 'B-A' and both(3) with 'A-B' and 'B-A'.	Enumeration Enumerated Values: 1 sink 2 source 3 both 4 not-applicable	.1.3.6.1.4.1.272.4.16.14.1.21
atmOamStatCCActivatorCorrmandatory The correlation of the last CC activation message sent to the responder.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.14.1.22
atmOamStatCCResponderStatemandatory The status of the passive CC negotiation, inactive(1) is the initial status, active(3) is reached after receiving an CC activation request whereas wait-deact-con(4) is used to indicate awaiting the CC deactivation confi…	Enumeration Enumerated Values: 1 inactive 3 active 4 wait-deact-con	.1.3.6.1.4.1.272.4.16.14.1.23
atmOamStatCCResponderDirectionmandatory The direction of action indicated by a received CC activation request, source(1) correlates with 'B-A', sink(2) with 'A-B' and both(3) with 'A-B' and 'B-A'.	Enumeration Enumerated Values: 1 source 2 sink 3 both 4 not-applicable	.1.3.6.1.4.1.272.4.16.14.1.24
atmOamStatCCResponderCorrmandatory The correlation of the received CC activation message.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.14.1.25
atmOamStatCCTxCellsmandatory The number of OAM continuity check cells that have been sent to the target in this sequence.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.14.1.26
atmOamStatCCRxCellsmandatory The number of OAM continuity check cells that have been received from the target in this sequence.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.272.4.16.14.1.27

The ethoaPvcTable displays all virtual ethernets defined for
a VCI/VPI on a specified hardware.

ethoaPvcEntry row .1.3.6.1.4.1.272.4.16.15.1

Indexes

ethoaPvcVpi ethoaPvcVci ethoaPvcAtmIfIndex

Column	Syntax	OID
ethoaPvcIfIndexmandatory This object contains an interface index and assigns the row to an entry in ifTable. When creating new entries in the table, the value of this object shall be set to 0. The next free ifIndex value is than allocated and a…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.15.1.1
ethoaPvcDescrmandatory Short description of the configured PVC	r/w	.1.3.6.1.4.1.272.4.16.15.1.2
ethoaPvcAtmIfIndexmandatory The Index to the ATM hardware.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.15.1.3
ethoaPvcVpimandatory The VPI value of this Virtual Path Connection.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.16.15.1.4
ethoaPvcVcimandatory The VCI value of this Virtual Channel Connection.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.272.4.16.15.1.5
ethoaPvcEncapsulationmandatory This values decides whether frames are send without FCS(1), with FCS(2) or wether VC multiplexing is used.	Enumerationr/w Enumerated Values: 1 bridged-no-fcs 2 bridged-fcs 3 vc-multiplexed 10 delete	.1.3.6.1.4.1.272.4.16.15.1.6
ethoaPvcPhysAddressmandatory The MAC-Address used for the virtual interface.	RFC1213-MIBPhysAddressr/w	.1.3.6.1.4.1.272.4.16.15.1.7

This table configures Vpi/Vci for raw protocols
(IP, IPX, etc.)

rpoaPvcEntry row .1.3.6.1.4.1.272.4.16.16.1

Indexes

rpoaPvcVpi rpoaPvcVci rpoaPvcAtmIfIndex

Column	Syntax	OID
rpoaPvcIfIndexmandatory This object contains an interface index and assigns the row to an entry in ifTable. When creating new entries in the table, the value of this object shall be set to 0. The next free ifIndex value is than allocated and a…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.16.1.1
rpoaPvcDescrmandatory Short description of the configured PVC	r/w	.1.3.6.1.4.1.272.4.16.16.1.2
rpoaPvcAtmIfIndexmandatory The Index to the ATM hardware.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.16.1.3
rpoaPvcVpimandatory The VPI value of this Virtual Path Connection.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.16.16.1.4
rpoaPvcVcimandatory The VCI value of this Virtual Channel Connection.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.272.4.16.16.1.5
rpoaPvcEncapsulationmandatory This values decides whether frames are send codes with LLC 0xAA 0xAA (non-ISO), LLC 0xFE 0xFE (ISO) or wether VC multiplexing is used.	Enumerationr/w Enumerated Values: 1 non-iso 2 iso 3 vc-multiplexed 10 delete	.1.3.6.1.4.1.272.4.16.16.1.6

This table configures Vpi/Vci for PPP oaver AAL5 (PPPoA)
permanent and on-demand sessions.

pppoaPvcEntry row .1.3.6.1.4.1.272.4.16.17.1

Indexes

pppoaPvcVpi pppoaPvcVci pppoaPvcAtmIfIndex

Column	Syntax	OID
pppoaPvcIfIndexmandatory This object contains an interface index and refers to an entry in ifTable. When creating new entries in the table, the next free ifIndex value is than allocated and assigned to the object. At the same time a new interfa…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.17.1.1
pppoaPvcDescrmandatory Short description of the configured PVC	r/w	.1.3.6.1.4.1.272.4.16.17.1.2
pppoaPvcAtmIfIndexmandatory The Index to the ATM hardware.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.17.1.3
pppoaPvcVpimandatory The VPI value of this Virtual Path Connection.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.16.17.1.4
pppoaPvcVcimandatory The VCI value of this Virtual Channel Connection.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.272.4.16.17.1.5
pppoaPvcEncapsulationmandatory This value decides whether VC multiplexing or LLC encapsulation is used.	Enumerationr/w Enumerated Values: 1 vc-multiplexed 2 llc 10 delete	.1.3.6.1.4.1.272.4.16.17.1.6
pppoaPvcClientTypemandatory This variable defines whether the PPP over AAL5 session will be established permanent(1) or initiated on-demand(2).	Enumerationr/w Enumerated Values: 1 permanent 2 on-demand	.1.3.6.1.4.1.272.4.16.17.1.7

This table provides QoS information for each active ATM VC on
the related ATM interface

atmQosVccEntry row .1.3.6.1.4.1.272.4.16.19.1

An entry in the table, containing ATM QoS parameters about a
particular virtual connection.

Indexes

atmQosVccAtmIfIndex atmQosVccVpi atmQosVccVci

Column	Syntax	OID
atmQosVccAtmIfIndexmandatory The interface index of the associated ATM hardware.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.19.1.1
atmQosVccVpimandatory The VPI value of this Virtual Channel Connection.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.16.19.1.2
atmQosVccVcimandatory The VCI value of this Virtual Channel Connection.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.272.4.16.19.1.3
atmQosVccServicemandatory The ATM service category of this virtual circuit connection: cbr vbr vbr2 vbr3 VBR1 + Best Effort vbr-rt real-time vbr2-rt real-time vbr3-rt real-time ubr Best Effort ubr2 Best Effort abr delete	Enumerationr/w Enumerated Values: 1 cbr 2 vbr 4 vbr3 8 ubr 20 delete	.1.3.6.1.4.1.272.4.16.19.1.4
atmQosVccOutPcrmandatory Output Peak Cell Rate (PCR) in bps.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.19.1.5
atmQosVccOutScrmandatory Output Sustained Cell Rate (SCR) in bps.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.19.1.6
atmQosVccOutMbsmandatory Output Maximum Burst Size (MBS) in Bytes, only for atmQosVccService vbr-rt(2) and vbr-nrt(3) (ATM service service category VBR).	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.19.1.7
atmQosVccOutMcrmandatory Output Minimum Cell Rate (MCR) in bps for connection with vbr-nrt(3).	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.16.19.1.8