BIANCA-BRICK-ALIVE-MIB Table View

The aliveTable contains entries defining any kind of
surveillance. It is a more general version of
ipHostsAliveTable that only deals with reachability of hosts
via ICMP messages. Additionally interfaces can now be
monitored, further extensions are possible in future.

aliveEntry row .1.3.6.1.4.1.272.4.36.1.1

Indexes

aliveIfIndex

Column	Syntax	OID
aliveSurveillancemandatory Specifies what kind of event may trigger an alive entry. Being a generalisation of MIB table ipHostsAliveTable the latter table may be replaced by it. Possible values are: o interface - the interface ope…	Enumerationr/w Enumerated Values: 1 interface 2 ping 3 brrp	.1.3.6.1.4.1.272.4.36.1.1.1
aliveIfIndexmandatory The index of interface to monitor the operation status. Like referenced in the ifTable. Applicable for surveillance mode 'interface'.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.36.1.1.2
aliveStatemandatory The state of the watched entity. Possible values are 'unknown', 'up' or 'down'. This value is not used for surveillance mode 'brrp'. The default value is 'unknown'.	Enumeration Enumerated Values: 1 up 2 down 3 unknown	.1.3.6.1.4.1.272.4.36.1.1.3
aliveTriggermandatory The variable trigger defines on change to what state (depending on the surveillance mode) the defined action is performed. Possible values are 'up' or 'down'.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.272.4.36.1.1.4
aliveActionmandatory This action is performed upon status change of the respective entity to the given trigger condition. Possible actions are 'up', 'down' or 'none'. The default value is 'none'.	Enumerationr/w Enumerated Values: 1 up 2 down 4 none 255 delete	.1.3.6.1.4.1.272.4.36.1.1.5
aliveFirstIfIndexmandatory The first interface index affected by the action. This value is not used for surveillance mode 'brrp'.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.36.1.1.6
aliveIfIndexRangemandatory A range of interface indexes affected by the action counted from aliveFirstIfIndex. Value '0' means that only interface aliveFirstIfIndex is affected. This value is not used for surveillance mode 'brrp'. …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.272.4.36.1.1.7
aliveTaskIdmandatory The id of the task definition used exclusively for table sorting purposes (multiple instances are possible). The default value is 1.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.272.4.36.1.1.8
aliveMasterProtomandatory The protocol used for interface keepalive monitoring. Possible values are: o brrp - monitoring via the Bintec Router Redundancy Protocol which is a derivate of the popular VRRP (RFC 2338). o ifst…	Enumerationr/w Enumerated Values: 1 brrp 2 ifstat 3 ping	.1.3.6.1.4.1.272.4.36.1.1.9
aliveMasterVrIdmandatory The id of the virtual router used for monitoring the interface. The associated BRRP configuration is stored in the biboBrrpOperTable.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.272.4.36.1.1.10
aliveMasterBrrpStatemandatory The operation state of the virtual router which triggers the specified action on the slave BRRP virtual router. The states 'initialize', 'backup' and 'master' are identical to the definition from RFC 2338. …	Enumerationr/w Enumerated Values: 1 initialize 2 backup 3 master 4 any	.1.3.6.1.4.1.272.4.36.1.1.11
aliveSlaveProtomandatory The protocol used for the slave (or backup) interface (or virtual router) keepalive operation status switching. o brrp - monitoring via the Bintec Router Redundancy Protocol which is a derivate o…	Enumerationr/w Enumerated Values: 1 brrp 2 ifstat 3 ping	.1.3.6.1.4.1.272.4.36.1.1.12
aliveSlaveVrIdmandatory The virtual router id used for interface admin status switching. The associated BRRP configuration is stored in the biboBrrpOperTable.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.272.4.36.1.1.13
aliveSlaveBrrpStatemandatory The admin state of the virtual router controlling the slave interface. down(1) -- the virtual routes enters the initialize state up(2) -- the virtual router switches to the backup or master s…	Enumerationr/w Enumerated Values: 1 down 2 up 3 sync 4 decrPrio	.1.3.6.1.4.1.272.4.36.1.1.14
aliveSlaveBrrpDecrPriomandatory This value is used to decrement 'biboBrrpOperPriority' when virtual router state switches from 'up' to 'decrPrio' (see 'aliveSlaveBrrpState') It is used again to increment 'biboBrrpOperPriority' when the …	Integer32r/w Constraints: range: 1-254	.1.3.6.1.4.1.272.4.36.1.1.15