BGP4-V2-MIB-JUNIPER Table View

Table of supported BGP versions.

jnxBgpM2VersionEntry row .1.3.6.1.4.1.2636.5.1.1.1.1.1.1

Entry containing data on a given supported version
of the Border Gateway Protocol and the level of
support provided. It is expected that any agent
implementation supporting this MIB module will
report support for Versi…

Indexes

jnxBgpM2VersionIndex

Column	Syntax	OID
jnxBgpM2VersionIndex The version number of the BGP Protocol.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.2636.5.1.1.1.1.1.1.1
jnxBgpM2VersionSupported This value is TRUE if this version of the BGP protocol identified in 'jnxBgpM2VersionIndex' is supported. The absence of a row for a particular jnxBgpM2VersionIndex indicates that that jnxBgpM2VersionIndex protocol ver…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.5.1.1.1.1.1.1.2

The supported BGP authentication mechanisms.

jnxBgpM2SupportedAuthEntry row .1.3.6.1.4.1.2636.5.1.1.1.2.1.1

Entry containing information whether a given BGP
authentication mechanism is supported by this
implementation.

Indexes

jnxBgpM2SupportedAuthCode

Column	Syntax	OID
jnxBgpM2SupportedAuthCode The BGP authentication code.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.2636.5.1.1.1.2.1.1.1
jnxBgpM2SupportedAuthValue This value is TRUE if a given authentication method is supported by the local implementation.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.5.1.1.1.2.1.1.2

Table of supported BGP-4 capabilities.

jnxBgpM2SupportedCapabilitiesEntry row .1.3.6.1.4.1.2636.5.1.1.1.3.2.1

Information about supported capabilities indexed
by capability number.

Indexes

jnxBgpM2SupportedCapabilityCode

Column	Syntax	OID
jnxBgpM2SupportedCapabilityCode Index of supported capability. The index directly corresponds with the BGP-4 Capability Advertisement Capability Code.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.2636.5.1.1.1.3.2.1.1
jnxBgpM2SupportedCapability This value is True if this capability is supported, False otherwise.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.5.1.1.1.3.2.1.2

BGP peer table.
          
This table contains, one entry per remote BGP peer,
any information about the connections with the remote
BGP peers.

jnxBgpM2PeerEntry row .1.3.6.1.4.1.2636.5.1.1.2.1.1.1

Entry containing information about the connection with
a remote BGP peer.

Indexes

jnxBgpM2PeerRoutingInstance jnxBgpM2PeerLocalAddrType jnxBgpM2PeerLocalAddr jnxBgpM2PeerRemoteAddrType jnxBgpM2PeerRemoteAddr

Column	Syntax	OID
jnxBgpM2PeerIdentifier The BGP Identifier of this entry's remote BGP peer. This entry should be 0.0.0.0 unless the jnxBgpM2PeerState is in the OpenConfirm or the Established state.	JnxBgpM2Identifier Type Constraints: range: 4	.1.3.6.1.4.1.2636.5.1.1.2.1.1.1.1
jnxBgpM2PeerState The remote BGP peer's FSM state.	Enumeration Enumerated Values: 1 idle 2 connect 3 active 4 opensent 5 openconfirm 6 established	.1.3.6.1.4.1.2636.5.1.1.2.1.1.1.2
jnxBgpM2PeerStatus Whether or not the BGP FSM for this remote peer is halted or running. The BGP FSM for a remote peer is halted after processing a Stop event. Likewise, it is in the running state after a Start event. The…	Enumeration Enumerated Values: 1 halted 2 running	.1.3.6.1.4.1.2636.5.1.1.2.1.1.1.3
jnxBgpM2PeerConfiguredVersion The configured version to originally start with this remote peer. The BGP speaker may permit negotiation to a lower version number of the protocol.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.2636.5.1.1.2.1.1.1.4
jnxBgpM2PeerNegotiatedVersion The negotiated version of BGP running between the two peers.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.2636.5.1.1.2.1.1.1.5
jnxBgpM2PeerLocalAddrType The address family of the local end of the peering session.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.5.1.1.2.1.1.1.6
jnxBgpM2PeerLocalAddr The address of the local end of the peering session.	OctetString Constraints: range: 4-20	.1.3.6.1.4.1.2636.5.1.1.2.1.1.1.7
jnxBgpM2PeerLocalPort The local port for the TCP connection between the BGP peers.	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.2636.5.1.1.2.1.1.1.8
jnxBgpM2PeerLocalAs Some implementations of BGP can represent themselves as multiple ASs. This is the AS that this peering session is representing itself as to the remote peer.	INET-ADDRESS-MIBInetAutonomousSystemNumber	.1.3.6.1.4.1.2636.5.1.1.2.1.1.1.9
jnxBgpM2PeerRemoteAddrType The address family of the remote end of the peering session.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.5.1.1.2.1.1.1.10
jnxBgpM2PeerRemoteAddr The address of the remote end of the peering session.	OctetString Constraints: range: 4-20	.1.3.6.1.4.1.2636.5.1.1.2.1.1.1.11
jnxBgpM2PeerRemotePort The remote port for the TCP connection between the BGP peers. In the case of a transport for which the notion of 'port' is irrelevant, an instance value of -1 should be returned by the agent for this object. …	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.2636.5.1.1.2.1.1.1.12
jnxBgpM2PeerRemoteAs The remote autonomous system number.	INET-ADDRESS-MIBInetAutonomousSystemNumber	.1.3.6.1.4.1.2636.5.1.1.2.1.1.1.13
jnxBgpM2PeerIndex This value is a unique index for the remote peer entry in the jnxBgpM2PeerTable. It is assigned by the agent at the point of creation of the jnxBgpM2PeerTable row entry. While its value is guaranteed to be unique at a…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.2.1.1.1.14
jnxBgpM2PeerRoutingInstance Routing instance index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.2.1.1.1.15

On a per peer basis, this table reflects the last
protocol-defined error encountered and reported on
the peer session.  If no entry for a given peer,
by its jnxBgpM2PeerIndex, exists in this table, then no
such errors have been observed, reported, and
recorded on the  session.

jnxBgpM2PeerErrorsEntry row .1.3.6.1.4.1.2636.5.1.1.2.2.1.1

Each entry contains information about errors sent
and received for a particular BGP peer.

Indexes

No indexes recorded

Column	Syntax	OID
jnxBgpM2PeerLastErrorReceived The last error code and subcode received by this BGP Speaker via a NOTIFICATION message for this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the e…	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.2636.5.1.1.2.2.1.1.1
jnxBgpM2PeerLastErrorSent The last error code and subcode sent by this BGP Speaker via a NOTIFICATION message to this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error …	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.2636.5.1.1.2.2.1.1.2
jnxBgpM2PeerLastErrorReceivedTime The timestamp that the last NOTIFICATION was received from this peer.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.2.2.1.1.3
jnxBgpM2PeerLastErrorSentTime The timestamp that the last NOTIFICATION was sent to this peer.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.2.2.1.1.4
jnxBgpM2PeerLastErrorReceivedText This object contains an implementation specific explanation of the error that was reported.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.5.1.1.2.2.1.1.5
jnxBgpM2PeerLastErrorSentText This object contains an implementation specific explanation of the error that is being reported.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.5.1.1.2.2.1.1.6
jnxBgpM2PeerLastErrorReceivedData The last error code's data seen by this peer.	OctetString Constraints: range: 0-4075	.1.3.6.1.4.1.2636.5.1.1.2.2.1.1.7
jnxBgpM2PeerLastErrorSentData The last error code's data sent to this peer.	OctetString Constraints: range: 0-4075	.1.3.6.1.4.1.2636.5.1.1.2.2.1.1.8

BGP peer authentication table.
          
This table contains, one entry per BGP peer,
information about the authentication with BGP peers.

jnxBgpM2PeerAuthEntry row .1.3.6.1.4.1.2636.5.1.1.2.3.1.1

Entry containing information about the authentication
with a BGP peer.

Indexes

No indexes recorded

Column	Syntax	OID
jnxBgpM2PeerAuthSent The local peer has sent authentication information to the remote peer in the BGP Authentication field.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.5.1.1.2.3.1.1.1
jnxBgpM2PeerAuthSentCode The code of the authentication information sent to the remote peer.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.2636.5.1.1.2.3.1.1.2
jnxBgpM2PeerAuthSentValue The payload of the authentication information from the remote peer.	OctetString Constraints: range: 0-252	.1.3.6.1.4.1.2636.5.1.1.2.3.1.1.3
jnxBgpM2PeerAuthRcvd The local peer has received authentication information from the remote peer in the BGP Authentication field.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.5.1.1.2.3.1.1.4
jnxBgpM2PeerAuthRcvdCode The code of the authentication information received from the remote peer.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.2636.5.1.1.2.3.1.1.5
jnxBgpM2PeerAuthRcvdValue The payload of the authentication information from the remote peer.	OctetString Constraints: range: 0-252	.1.3.6.1.4.1.2636.5.1.1.2.3.1.1.6

A table reporting the per-peering session amount
of time elapsed and update events since the peering
session advanced into the Established state.

jnxBgpM2PeerEventTimesEntry row .1.3.6.1.4.1.2636.5.1.1.2.4.1.1

Each row contains a set of statistics about time
spent and events encountered in the peer session
Established state.

Indexes

No indexes recorded

Column	Syntax	OID
jnxBgpM2PeerFsmEstablishedTime This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is boot…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.2.4.1.1.1
jnxBgpM2PeerInUpdatesElapsedTime Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time jnxBgpM2PeerInUpdates is incremented, the value of this object is set to zero (0). This value shall also be zero (0) when…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.2.4.1.1.2

Per peer management data on BGP session timers.

jnxBgpM2PeerConfiguredTimersEntry row .1.3.6.1.4.1.2636.5.1.1.2.4.2.1

Each entry corresponds to the current state of
BGP timers on a given peering session.

Indexes

No indexes recorded

Column	Syntax	OID
jnxBgpM2PeerConnectRetryInterval Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2636.5.1.1.2.4.2.1.1
jnxBgpM2PeerHoldTimeConfigured Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an O…	Unsigned32 Constraints: range: 0-0 range: 3-65535	.1.3.6.1.4.1.2636.5.1.1.2.4.2.1.2
jnxBgpM2PeerKeepAliveConfigured Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in jnxBgpM2P…	Unsigned32 Constraints: range: 0-21845	.1.3.6.1.4.1.2636.5.1.1.2.4.2.1.3
jnxBgpM2PeerMinASOrigInterval Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.2636.5.1.1.2.4.2.1.4
jnxBgpM2PeerMinRouteAdverInterval Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.2636.5.1.1.2.4.2.1.5

Current values of per-peer timers which can be
dynamically set in the jnxBgpM2PeerConfiguredTimersTable.
Values reflected in this table are the current
operational values, after negotiation from values
derived from initial configuration or last set from
jnxBgpM2PeerConfiguredTimersTable row instances.

jnxBgpM2PeerNegotiatedTimersEntry row .1.3.6.1.4.1.2636.5.1.1.2.4.3.1

Each entry reflects a value of the currently
operational, negotiated timers as reflected in the
JnxBgpM2PeerNegotiatedTimersEntry.

Indexes

No indexes recorded

Column	Syntax	OID
jnxBgpM2PeerHoldTime The value of this object is calculated by this BGP Speaker as being; zero (0) - if this was the value sent by the peer and this value is permitted by this BGP Speaker. In this case, no keepalive messages…	Unsigned32 Constraints: range: 0-0 range: 3-65535	.1.3.6.1.4.1.2636.5.1.1.2.4.3.1.1
jnxBgpM2PeerKeepAlive Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with jnxBgpM2PeerHoldTime, it has the same proportion as w…	Unsigned32 Constraints: range: 0-21845	.1.3.6.1.4.1.2636.5.1.1.2.4.3.1.2

This table contains the capabilities
that are supported for a given peer.

jnxBgpM2PeerCapsAnnouncedEntry row .1.3.6.1.4.1.2636.5.1.1.2.5.1.1

These entries are keyed by a BGP-4 peer remote
address and the BGP Capability Code

Indexes

jnxBgpM2PeerIndex jnxBgpM2PeerCapAnnouncedCode jnxBgpM2PeerCapAnnouncedIndex

Column	Syntax	OID
jnxBgpM2PeerCapAnnouncedCode The BGP Capability Advertisement Capability Code.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.2636.5.1.1.2.5.1.1.1
jnxBgpM2PeerCapAnnouncedIndex Multiple instances of a given capability may be sent bgp a BGP speaker. This variable is used to index them.	Unsigned32 Constraints: range: 1-128	.1.3.6.1.4.1.2636.5.1.1.2.5.1.1.2
jnxBgpM2PeerCapAnnouncedValue The value of the announced capability.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2636.5.1.1.2.5.1.1.3

This table contains the capabilities
that are supported for a given peer.

jnxBgpM2PeerCapsReceivedEntry row .1.3.6.1.4.1.2636.5.1.1.2.5.2.1

These entries are keyed by a BGP-4 peer remote
address and the BGP Capability Code

Indexes

jnxBgpM2PeerIndex jnxBgpM2PeerCapReceivedCode jnxBgpM2PeerCapReceivedIndex

Column	Syntax	OID
jnxBgpM2PeerCapReceivedCode The BGP Capability Advertisement Capability Code.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.2636.5.1.1.2.5.2.1.1
jnxBgpM2PeerCapReceivedIndex Multiple instances of a given capability may be sent bgp a BGP speaker. This variable is used to index them.	Unsigned32 Constraints: range: 1-128	.1.3.6.1.4.1.2636.5.1.1.2.5.2.1.2
jnxBgpM2PeerCapReceivedValue The value of the announced capability.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2636.5.1.1.2.5.2.1.3

The counters associated with a BGP Peer.

jnxBgpM2PeerCountersEntry row .1.3.6.1.4.1.2636.5.1.1.2.6.1.1

Each entry contains counters of message transmissions
and FSM transitions for a given BGP Peering session.

Indexes

No indexes recorded

Column	Syntax	OID
jnxBgpM2PeerInUpdates The number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.2.6.1.1.1
jnxBgpM2PeerOutUpdates The number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.2.6.1.1.2
jnxBgpM2PeerInTotalMessages The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.2.6.1.1.3
jnxBgpM2PeerOutTotalMessages The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.2.6.1.1.4
jnxBgpM2PeerFsmEstablishedTrans The total number of times the BGP FSM transitioned into the established state for this peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.2.6.1.1.5

Additional per-peer, per AFI SAFI counters for prefixes

jnxBgpM2PrefixCountersEntry row .1.3.6.1.4.1.2636.5.1.1.2.6.2.1

Entry containing information about a bgp-peers prefix
counters.

Indexes

jnxBgpM2PeerIndex jnxBgpM2PrefixCountersAfi jnxBgpM2PrefixCountersSafi

Column	Syntax	OID
jnxBgpM2PrefixCountersAfi The AFI index of the per-peer, per prefix counters	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.5.1.1.2.6.2.1.1
jnxBgpM2PrefixCountersSafi The SAFI index of the per-peer, per prefix counters	JnxBgpM2Safi Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.5.1.1.2.6.2.1.2
jnxBgpM2PrefixInPrefixes The number of prefixes received from a peer and are stored in the Adj-Ribs-In for that peer.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.2.6.2.1.7
jnxBgpM2PrefixInPrefixesAccepted The number of prefixes for a peer that are installed in the Adj-Ribs-In and are eligible to become active in the Loc-Rib.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.2.6.2.1.8
jnxBgpM2PrefixInPrefixesRejected The number of prefixes for a peer that are installed in the Adj-Ribs-In and are NOT eligible to become active in the Loc-Rib.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.2.6.2.1.9
jnxBgpM2PrefixOutPrefixes The number of prefixes for a peer that are installed in that peers Adj-Ribs-Out.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.2.6.2.1.10
jnxBgpM2PrefixInPrefixesActive The number of prefixes for a peer that are installed in the Adj-Ribs-In and are the active route in the Loc-Rib.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.2.6.2.1.11

Table of route reflection client settings on a per-peer
basis.

jnxBgpM2PeerReflectorClientEntry row .1.3.6.1.4.1.2636.5.1.1.2.7.1.2796.1.1

Entry containing data on a per-peer basis on whether
the peer is configured as a route reflector client.

Indexes

No indexes recorded

Column	Syntax	OID
jnxBgpM2PeerReflectorClient This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient indicates that this peer is not a reflector client. A value of client indicates that this peer is a reflec…	Enumeration Enumerated Values: 0 nonClient 1 client 2 meshedClient	.1.3.6.1.4.1.2636.5.1.1.2.7.1.2796.1.1.1

Table of confederation member settings on a per-peer
basis.

jnxBgpM2PeerConfedMemberEntry row .1.3.6.1.4.1.2636.5.1.1.2.7.1.3065.1.1

Entry containing data on a per-peer basis on whether
the peer is configured as a BGP confederation member.

Indexes

No indexes recorded

Column	Syntax	OID
jnxBgpM2PeerConfedMember This value indicates whether the given peer is in our confederation or not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.5.1.1.2.7.1.3065.1.1.1

Table containing rows for administratively starting and
stopping peering sessions.

jnxBgpM2CfgPeerAdminStatusEntry row .1.3.6.1.4.1.2636.5.1.1.2.8.1.1

Entry containing row for administratively starting and
stopping peers.

Indexes

jnxBgpM2PeerIndex

Column	Syntax	OID
jnxBgpM2CfgPeerAdminStatus This object allows the Manual Stop and Manual Start events to be sent to an activated peering session.	Enumerationr/w Enumerated Values: 1 stop 2 start	.1.3.6.1.4.1.2636.5.1.1.2.8.1.1.1

BGP configuration peer table.
          
This table allows the configuration of the parameters
for a session with a BGP peer.
          
+++wayne provide description of how config should be done
for a peer per table.

jnxBgpM2CfgPeerEntry row .1.3.6.1.4.1.2636.5.1.1.2.8.3.1

Entry containing information set up by a management
entity to configure a connection with a BGP peer.

Indexes

jnxBgpM2CfgPeerIndex

Column	Syntax	OID
jnxBgpM2CfgPeerConfiguredVersion The configured version to originally start with this peer. The BGP speaker may permit negotiation to a lower version number of the protocol depending on the set value of jnxBgpM2CfgAllowVersionNegotiation.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2636.5.1.1.2.8.3.1.1
jnxBgpM2CfgAllowVersionNegotiation If set to true, during session establishment with this peer, negotiation to a version lower than that specified in jnxBgpM2CfgPeerConfiguredVersion will be allowed.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.5.1.1.2.8.3.1.2
jnxBgpM2CfgPeerLocalAddrType The address family of the speakers of this BGP session.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.5.1.1.2.8.3.1.3
jnxBgpM2CfgPeerLocalAddr The address of the local end of the peering session.	OctetStringr/w Constraints: range: 4-20	.1.3.6.1.4.1.2636.5.1.1.2.8.3.1.4
jnxBgpM2CfgPeerLocalAs Autonomous system represented to peer on peering session initialization. Some implementations of BGP can represent themselves as multiple ASes. These implementations can set this to an alternate autonomous system. If …	INET-ADDRESS-MIBInetAutonomousSystemNumberr/w	.1.3.6.1.4.1.2636.5.1.1.2.8.3.1.5
jnxBgpM2CfgPeerRemoteAddrType The address family of the speakers of the remote BGP session.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.5.1.1.2.8.3.1.6
jnxBgpM2CfgPeerRemoteAddr The address of the remote end (destination address of peer) for peering session.	OctetStringr/w Constraints: range: 4-20	.1.3.6.1.4.1.2636.5.1.1.2.8.3.1.7
jnxBgpM2CfgPeerRemotePort This is the remote port for the transport connection between the BGP peers. In the case of a transport for which the notion of port is irrelevant, the value of -1 can be defaulted or set.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.2636.5.1.1.2.8.3.1.8
jnxBgpM2CfgPeerRemoteAs Autonomous system number of the remote peer.	INET-ADDRESS-MIBInetAutonomousSystemNumberr/w	.1.3.6.1.4.1.2636.5.1.1.2.8.3.1.9
jnxBgpM2CfgPeerEntryStorageType This object type specifies the intended storage type for the jnxBgpM2CfgPeerEntry row instance.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2636.5.1.1.2.8.3.1.10
jnxBgpM2CfgPeerError This value indicates the current error status of the row denoting the configured error status. If this row is still under creation (has not been activated jnxBgpM2CfgPeerRowEntryStatus), then this instanc…	Enumeration Enumerated Values: 0 unknown 1 notActivated 2 errDuplicatePeeringSession 3 activated	.1.3.6.1.4.1.2636.5.1.1.2.8.3.1.11
jnxBgpM2CfgPeerBgpPeerEntry Upon activation of the session data contained in this row instance, this object points to an instance of a row within the jnxBgpM2PeerTable reflecting the session in its initializing or operational state. Retrieval of …	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.2636.5.1.1.2.8.3.1.12
jnxBgpM2CfgPeerRowEntryStatus This object type is used to control creation, activation, and deletion of this row instance.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.5.1.1.2.8.3.1.13
jnxBgpM2CfgPeerIndex Uniquely identifies an instance of a peer row, as an element of configuration.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2636.5.1.1.2.8.3.1.14
jnxBgpM2CfgPeerStatus This specifies the state of the peering session upon activation. If disabled, the FSM is in the halted state and no Automatic Start events are generated. If enabled, the FSM is in the running state and Automatic Start …	Enumerationr/w Enumerated Values: 1 halted 2 running	.1.3.6.1.4.1.2636.5.1.1.2.8.3.1.15
jnxBgpM2CfgPeerRoutingInstance Routing instance index.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.2.8.3.1.16

Table contain per peer configuration for BGP Authentication.

jnxBgpM2CfgPeerAuthEntry row .1.3.6.1.4.1.2636.5.1.1.2.8.4.1

Entry containing information about a peer's BGP Authentication
configuration.

Indexes

No indexes recorded

Column	Syntax	OID
jnxBgpM2CfgPeerAuthEnabled This value is true if BGP Authentication is enabled for this peer. This is the authentication mechanism documented in the base BGP specification, not the MD5 session protection mechanism.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.5.1.1.2.8.4.1.1
jnxBgpM2CfgPeerAuthCode The authentication code for the BGP Authentication mechanism.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2636.5.1.1.2.8.4.1.2
jnxBgpM2CfgPeerAuthValue The authentication payload for the BGP authentication mechanism. This value has semantic meaning within the context of the authentication code.	OctetStringr/w Constraints: range: 0-252	.1.3.6.1.4.1.2636.5.1.1.2.8.4.1.3

Table for configuration of per-peer timers.

jnxBgpM2CfgPeerTimersEntry row .1.3.6.1.4.1.2636.5.1.1.2.8.5.1

Entry containing per-peer timer configuration.

Indexes

No indexes recorded

Column	Syntax	OID
jnxBgpM2CfgPeerConnectRetryInterval Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2636.5.1.1.2.8.5.1.1
jnxBgpM2CfgPeerHoldTimeConfigured Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an O…	Unsigned32r/w Constraints: range: 0-0 range: 3-65535	.1.3.6.1.4.1.2636.5.1.1.2.8.5.1.2
jnxBgpM2CfgPeerKeepAliveConfigured Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in jnxBgpM2P…	Unsigned32r/w Constraints: range: 0-21845	.1.3.6.1.4.1.2636.5.1.1.2.8.5.1.3
jnxBgpM2CfgPeerMinASOrigInterval Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2636.5.1.1.2.8.5.1.4
jnxBgpM2CfgPeerMinRouteAdverInter Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2636.5.1.1.2.8.5.1.5

Table of route reflection client settings on a per-peer
basis.

jnxBgpM2CfgPeerReflectorClientEntry row .1.3.6.1.4.1.2636.5.1.1.2.8.6.1.2796.1.1

Entry containing data on a per-peer basis on whether
the peer is configured as a route reflector client.

Indexes

No indexes recorded

Column	Syntax	OID
jnxBgpM2CfgPeerReflectorClient This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient indicates that this peer is not a reflector client. A value of client indicates that this peer is a reflec…	Enumerationr/w Enumerated Values: 0 nonClient 1 client 2 meshedClient	.1.3.6.1.4.1.2636.5.1.1.2.8.6.1.2796.1.1.1

Table of confederation member settings on a per-peer
basis.

jnxBgpM2CfgPeerConfedMemberEntry row .1.3.6.1.4.1.2636.5.1.1.2.8.6.1.3065.1.1

Entry containing data on a per-peer basis on whether
the peer is configured as a BGP confederation member.

Indexes

No indexes recorded

Column	Syntax	OID
jnxBgpM2CfgPeerConfedMember This value indicates whether the given peer is in our confederation or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.5.1.1.2.8.6.1.3065.1.1.1

The BGP-4 Received Path Attribute Table contains
information about paths to destination networks
received from all BGP4 peers.  Collectively, this
represents the Adj-Ribs-In.  The route where
jnxBgpM2NlriBest is TRUE represents, for this NLRI,
the route that is installed in the LocRib from the
Adj-Ribs-In.

jnxBgpM2NlriEntry row .1.3.6.1.4.1.2636.5.1.1.3.1.1

Information about a path to a network.

Indexes

jnxBgpM2PeerIndex jnxBgpM2NlriAfi jnxBgpM2NlriSafi jnxBgpM2NlriPrefix jnxBgpM2NlriPrefixLen jnxBgpM2NlriIndex

Column	Syntax	OID
jnxBgpM2NlriIndex This index allows for multiple instances of a base prefix for a certain AFI SAFI from a given peer. This is currently useful for two things: 1. Allowing for a peer in future implementations to send more than a single…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.3.1.1.1
jnxBgpM2NlriAfi The address family of the prefix for this NLRI.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.5.1.1.3.1.1.2
jnxBgpM2NlriSafi The subsequent address family of the prefix for this NLRI	JnxBgpM2Safi Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.5.1.1.3.1.1.3
jnxBgpM2NlriPrefix An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by jnxBgpM2PathAttrAddrPrefixLen. Any bits beyond the length specified …	OctetString Constraints: range: 4-20	.1.3.6.1.4.1.2636.5.1.1.3.1.1.4
jnxBgpM2NlriPrefixLen Length in bits of the address prefix in the Network Layer Reachability Information field.	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.2636.5.1.1.3.1.1.5
jnxBgpM2NlriBest An indication of whether or not this route was chosen as the best BGP4 route.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.5.1.1.3.1.1.6
jnxBgpM2NlriCalcLocalPref The degree of preference calculated by the receiving BGP4 speaker for an advertised route.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.3.1.1.7
jnxBgpM2PathAttrIndex This value is a unique index for the per-NLRI entry in the jnxBgpM2PeerAttrTable. It is assigned by the agent at the point of creation of the jnxBgpM2PeerAttrTable row entry. While its value is guaranteed to be unique…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.3.1.1.8
jnxBgpM2NlriOpaqueType This object enumerates the type of the row that is pointed to in the table row jnxBgpM2NlriOpaquePointer instance, if jnxBgpM2NlriOpaquePointer is in fact not a zero length. jnxBgpM2NlriOpaqueType is necessary since th…	Enumeration Enumerated Values: 0 none 1 bgpMplsLabelStack	.1.3.6.1.4.1.2636.5.1.1.3.1.1.9
jnxBgpM2NlriOpaquePointer Pointer to a row that decomposes the data that is opaque to the BGP MIB but is sent in the NLRI. This RowPointer has zero (0) length data instance if jnxBgpM2NlriOpaqueType is none.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.2636.5.1.1.3.1.1.10

This table contains on a per-peer basis one or more
routes from the jnxBgpM2NlriTable that have been
placed in this peer's Adj-Ribs-Out.

jnxBgpM2AdjRibsOutEntry row .1.3.6.1.4.1.2636.5.1.1.3.2.1

List of BGP routes that have been placed into a
peer's Adj-Ribs-Out.

Indexes

jnxBgpM2PeerIndex jnxBgpM2NlriAfi jnxBgpM2NlriSafi jnxBgpM2NlriPrefix jnxBgpM2NlriPrefixLen jnxBgpM2AdjRibsOutIndex

Column	Syntax	OID
jnxBgpM2AdjRibsOutIndex Certain extensions to BGP permit multiple instance of a per afi, per safi prefix to be advertised to a peer. This object allows the enumeration of them.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.3.2.1.1
jnxBgpM2AdjRibsOutRoute This object points to the route in the jnxBgpM2NlriTable that corresponds to the entry in the peer's Adj-Rib-Out. Outgoing route maps are not reflected at this point as those are part of the Update-Send process.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.2636.5.1.1.3.2.1.2

Provides per advertised network-prefix attribute data,
as advertised over a peering session.

jnxBgpM2PathAttrEntry row .1.3.6.1.4.1.2636.5.1.1.3.4.1

Each entry contains data about a given network
prefix, per-prefix and per-advertising peer.

Indexes

jnxBgpM2PathAttrIndex

Column	Syntax	OID
jnxBgpM2PathAttrOrigin The ultimate origin of the path information.	Enumeration Enumerated Values: 1 igp 2 egp 3 incomplete	.1.3.6.1.4.1.2636.5.1.1.3.4.1.1
jnxBgpM2PathAttrNextHopAddrType The address family of the address for the border router that should be used to access the destination network.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.5.1.1.3.4.1.2
jnxBgpM2PathAttrNextHop The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet. The address family of this object will be the same as that of t…	OctetString Constraints: range: 4-20	.1.3.6.1.4.1.2636.5.1.1.3.4.1.3
jnxBgpM2PathAttrMedPresent Whether or not the MED value is present. If it is not present, the jnxBgpM2PathAttrMed object has no useful value and should be set to 0.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.5.1.1.3.4.1.4
jnxBgpM2PathAttrMed This metric is used to discriminate between multiple exit points to an adjacent autonomous system.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.3.4.1.5
jnxBgpM2PathAttrLocalPrefPresent Whether or not the LocalPref value is present. If it is not present, the jnxBgpM2PathAttrLocalPref object has no useful value and should be set to 0.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.5.1.1.3.4.1.6
jnxBgpM2PathAttrLocalPref The originating BGP4 speakers degree of preference for an advertised route.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.3.4.1.7
jnxBgpM2PathAttrAtomicAggregate When this object is set to atomicAggregatePresent, the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specific.	Enumeration Enumerated Values: 1 atomicAggregatePresent 2 atomicAggregateMissing	.1.3.6.1.4.1.2636.5.1.1.3.4.1.8
jnxBgpM2PathAttrAggregatorAS The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet.	INET-ADDRESS-MIBInetAutonomousSystemNumber	.1.3.6.1.4.1.2636.5.1.1.3.4.1.9
jnxBgpM2PathAttrAggregatorAddr The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.	JnxBgpM2Identifier Type Constraints: range: 4	.1.3.6.1.4.1.2636.5.1.1.3.4.1.10
jnxBgpM2AsPathCalcLength This value represents the calculated length of the AS Path according to the rules of the BGP specification. This value is used in route selection.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.3.4.1.11
jnxBgpM2AsPathString This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator read…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.5.1.1.3.4.1.12
jnxBgpM2AsPathIndex This value is a unique index for the decomposed AS Path in the jnxBgpM2AsPathTable. It is assigned by the agent at the point of creation of the jnxBgpM2AsPathTable row entry. While its value is guaranteed to be unique…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.3.4.1.13

This table is present for BGP speakers that support
the AS 4byte specification and are functioning as
a router between 2-byte and 4-byte AS space.

jnxBgpM2AsPath4byteEntry row .1.3.6.1.4.1.2636.5.1.1.3.5.1

Each row contains the information for the AS 4-byte
extension's NEW_AS_PATH and NEW_AGGREGATOR attributes.

Indexes

No indexes recorded

Column	Syntax	OID
jnxBgpM2AsPath4bytePathPresent This value may only be true if this BGP Speaker is functioning as a router between ASs that are in 2-byte and 4-byte AS space. If this value is true, then the NEW_AS_PATH attributes are present and the 4-byte versions …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.5.1.1.3.5.1.1
jnxBgpM2AsPath4byteAggregatorAS The NEW_AGGREGATOR AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Inter…	INET-ADDRESS-MIBInetAutonomousSystemNumber	.1.3.6.1.4.1.2636.5.1.1.3.5.1.2
jnxBgpM2AsPath4byteCalcLength This value represents the calculated length of the NEW_AS_PATH according to the rules of the BGP specification. This value is used in route selection.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.3.5.1.3
jnxBgpM2AsPath4byteString This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator read…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.5.1.1.3.5.1.4
jnxBgpM2AsPath4byteIndex This value is a unique index for the decomposed AS Path in the jnxBgpM2AsPathTable. It is assigned by the agent at the point of creation of the jnxBgpM2AsPathTable row entry. While its value is guaranteed to be unique…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.3.5.1.5

The BGP-4 Path Attribute AS Path Table
contains the per network path (NLRI)
AS PATH data received from the
advertising BGP peer.

jnxBgpM2AsPathEntry row .1.3.6.1.4.1.2636.5.1.1.3.6.1

Information about an AS path provided with a path to
a network.

Indexes

jnxBgpM2PathAttrIndex jnxBgpM2AsPathSegmentIndex jnxBgpM2AsPathElementIndex jnxBgpM2AsPathElementValue

Column	Syntax	OID
jnxBgpM2AsPathSegmentIndex A per-AS path segment index. This will index a set of autonomous systems in an AS path which are part of the same sequence or set (as determined by the row value of jnxBgpM2AsPathType, which should be the same value fo…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.3.6.1.1
jnxBgpM2AsPathElementIndex A per-AS element index. This will index a particular AS within a sequence or set of autonomous systems in an AS path.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.3.6.1.2
jnxBgpM2AsPathType The type of sequence in which this asPath was advertised as an attribute. Note that all asPath row instances for a given (jnxBgpM2PathAttrIndex, jnxBgpM2AsPathIndex) index pair will have their jnxBgpM2AsPathType set to…	Enumeration Enumerated Values: 1 asSet 2 asSequence 3 confedSequence 4 confedSet	.1.3.6.1.4.1.2636.5.1.1.3.6.1.3
jnxBgpM2AsPathElementValue An AS value for an AS the related NLRI traversed in the propagation of its advertisement. This value is to be interpreted in the context of the sequence implied by jnxBgpM2AsPathIndex and jnxBgpM2AsPathType (and, in se…	INET-ADDRESS-MIBInetAutonomousSystemNumber	.1.3.6.1.4.1.2636.5.1.1.3.6.1.4

The BGP-4 Path Attribute Unknown Table
contains the per network path (NLRI)
data on the path attributes advertised
with a route but not known to the local BGP implementation
or not otherwise capable of being returned from this agent.
          
The absence of row data for a given index value for
jnxBgpM2PathAttrIndex indicates a lack of such unknown
attribute information for the indicated network path
(as indexed by that jnxBgpM2PathAttrIndex value in the
jnxBgpM2PathAttrTable).

jnxBgpM2PathAttrUnknownEntry row .1.3.6.1.4.1.2636.5.1.1.3.7.1

Information about an unknown attribute
provided with a path to a network.

Indexes

jnxBgpM2PathAttrIndex jnxBgpM2PathAttrUnknownIndex

Column	Syntax	OID
jnxBgpM2PathAttrUnknownIndex An integer index for a row in this table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.3.7.1.1
jnxBgpM2PathAttrUnknownType The attribute type advertised with this unknown attribute by the peer.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.3.7.1.2
jnxBgpM2PathAttrUnknownValue Value of path attribute not understood by the base BGP-4 document. Octets beyond the maximum size, if any, are not recorded by this row object.	OctetString Constraints: range: 0-4070	.1.3.6.1.4.1.2636.5.1.1.3.7.1.3

The BGP-4 Path Attribute Community Table
contains the per network path (NLRI)
data on the community membership advertised
with a route.  The absence of row
data for a given index value for jnxBgpM2PathAttrIndex
indicates a lack of this attribute information
for the indicated network path (as indexed by
that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable).

jnxBgpM2PathAttrCommEntry row .1.3.6.1.4.1.2636.5.1.1.3.8.1.1997.1.1

Information about a community association
provided with a path to a network.

Indexes

jnxBgpM2PathAttrIndex jnxBgpM2PathAttrCommIndex

Column	Syntax	OID
jnxBgpM2PathAttrCommIndex An integer index for a row in this table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.3.8.1.1997.1.1.1
jnxBgpM2PathAttrCommValue A value representing a community. There are certain 4-octet long values which could be returned in this columnar row data that carry additional semantics.	JnxBgpM2Community Type Constraints: range: 4	.1.3.6.1.4.1.2636.5.1.1.3.8.1.1997.1.1.2

Table of link local nexthops as sent by RFC 2545
for IPv6 BGP Speakers.

jnxBgpM2LinkLocalNextHopEntry row .1.3.6.1.4.1.2636.5.1.1.3.8.1.2545.1

Entry containing the link-local nexthops as sent
by a BGP speaker running RFC 2545 extensions for
double-nexthops.

Indexes

jnxBgpM2PathAttrIndex

Column	Syntax	OID
jnxBgpM2LinkLocalNextHopPresent This value is TRUE if and only if the BGP speaker is receiving IPv6 NLRI using the RFC 2545 double nexthop convention and it has received a link local scope nexthop in addition to the global scope nexthop.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.5.1.1.3.8.1.2545.1.1
jnxBgpM2LinkLocalNextHop This value contains an IPv6 link local address of InetAddressType of type ipv6z. This value is only present if jnxBgpM2LinkLocalNextHopPresent is true.	OctetString Constraints: range: 20-20	.1.3.6.1.4.1.2636.5.1.1.3.8.1.2545.1.2

Per prefix data pertinent to advertisement of a
network prefix through an originator.

jnxBgpM2PathAttrOriginatorIdEntry row .1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.1.1

Each entry contains data pertinent to a network
prefix as received through its originating BGP
route reflector.

Indexes

jnxBgpM2PathAttrIndex

Column	Syntax	OID
jnxBgpM2PathAttrOriginatorId The Originator-ID identifying the router that initially advertised this destination to a Route Reflector. A value of 0.0.0.0 indicates the absence of this attribute.	JnxBgpM2Identifier Type Constraints: range: 4	.1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.1.1.1

The BGP-4 Path Attribute Cluster Table
contains the per network path (NLRI)
data on the reflection path which a
route has traversed.  The absence of row
data for a given index value for jnxBgpM2PathAttrIndex
indicates a lack of this attribute information
for the indicated network path (as indexed by
that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable).

jnxBgpM2PathAttrClusterEntry row .1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.2.1

Information about a cluster traversal
provided with a path to a network.

Indexes

jnxBgpM2PathAttrIndex jnxBgpM2PathAttrClusterIndex

Column	Syntax	OID
jnxBgpM2PathAttrClusterIndex An integral index for a row in this table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.2.1.1
jnxBgpM2PathAttrClusterValue A four octet long value representing a part of the reflection path that the route has passed. Each such four octet long value represents the ID of a cluster that the route has traversed. The sequence of this path as r…	JnxBgpM2Identifier Type Constraints: range: 4	.1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.2.1.2

The BGP-4 Path Attribute Community Table
contains the per network path (NLRI)
data on the extended community membership advertised
with a route.  The absence of row
data for a given index value for jnxBgpM2PathAttrIndex
indicates a lack of this attribute information
for the indicated network path (as indexed by
that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable).
          
XXX JMH - can not assign the OID until an RFC is published.

jnxBgpM2PathAttrExtCommEntry row .1.3.6.1.4.1.2636.5.1.1.3.8.1.65001.1

Information about an extended community association
provided with a path to a network.

Indexes

jnxBgpM2PathAttrIndex jnxBgpM2PathAttrExtCommIndex

Column	Syntax	OID
jnxBgpM2PathAttrExtCommIndex An integral index for a row in this table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.1.1.3.8.1.65001.1.1
jnxBgpM2PathAttrExtCommValue A value representing an extended community which was received with the route implied by the jnxBgpM2PathAttr Index value of this row data. There are certain 8-octet long values which could be returned in this columnar…	JnxBgpM2ExtendedCommunity Type Constraints: range: 8	.1.3.6.1.4.1.2636.5.1.1.3.8.1.65001.1.2