BGP-MPLS-LAYER3-VPN-MULTICAST-MIB

        This MIB module contains managed object definitions to
configure and/or monitor Multicast communication over IP
Virtual Private Networks (VPNs) supported by the
Multiprotocol Label Switching/Border Gateway Protocol
(MPLS/BGP) on a Provider Edge (PE) router.
        
Copyright (c) 2018 IETF Trust and the persons identified
as authors of the code.  All rights reserved.
        
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
    
Source file
BGP-MPLS-LAYER3-VPN-MULTICAST-MIB
Last revised
Identity
mvpnMIB
Base OID
1.3.6.1.2.1.243
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'BGP-MPLS-LAYER3-VPN-MULTICAST-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'BGP-MPLS-LAYER3-VPN-MULTICAST-MIB::mvpnMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BGP-MPLS-LAYER3-VPN-MULTICAST-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BGP-MPLS-LAYER3-VPN-MULTICAST-MIB::mvpnMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (115)
.1.3.6.1.2.1.243
.1.3.6.1.2.1.243.0
.1.3.6.1.2.1.243.1
.1.3.6.1.2.1.243.1.1
.1.3.6.1.2.1.243.1.1.1
.1.3.6.1.2.1.243.1.1.10
.1.3.6.1.2.1.243.1.1.11
.1.3.6.1.2.1.243.1.1.2
.1.3.6.1.2.1.243.1.1.3
.1.3.6.1.2.1.243.1.1.4
.1.3.6.1.2.1.243.1.1.5
.1.3.6.1.2.1.243.1.1.6
.1.3.6.1.2.1.243.1.1.7
.1.3.6.1.2.1.243.1.1.8
Unsigned32
.1.3.6.1.2.1.243.1.1.9
.1.3.6.1.2.1.243.1.2
.1.3.6.1.2.1.243.1.2.1
Enumeration
.1.3.6.1.2.1.243.1.2.1.2
.1.3.6.1.2.1.243.1.2.1.3
.1.3.6.1.2.1.243.1.2.1.4
Enumeration
.1.3.6.1.2.1.243.1.2.1.5
.1.3.6.1.2.1.243.1.2.1.6
.1.3.6.1.2.1.243.1.2.1.7
Enumeration
.1.3.6.1.2.1.243.1.2.1.8
Enumeration
.1.3.6.1.2.1.243.1.2.1.9
.1.3.6.1.2.1.243.1.3
.1.3.6.1.2.1.243.1.3.1
Enumeration
.1.3.6.1.2.1.243.1.3.1.1
.1.3.6.1.2.1.243.1.3.1.2
.1.3.6.1.2.1.243.1.3.1.3
messages per secondUnsigned32
.1.3.6.1.2.1.243.1.3.1.4
Unsigned32
.1.3.6.1.2.1.243.1.3.1.5
routes per secondUnsigned32
.1.3.6.1.2.1.243.1.3.1.6
Unsigned32
.1.3.6.1.2.1.243.1.3.1.7
routes per secondUnsigned32
.1.3.6.1.2.1.243.1.3.1.8
.1.3.6.1.2.1.243.1.4
.1.3.6.1.2.1.243.1.4.1
.1.3.6.1.2.1.243.1.4.1.1
.1.3.6.1.2.1.243.1.4.1.3
.1.3.6.1.2.1.243.1.4.1.4
.1.3.6.1.2.1.243.1.4.1.5
.1.3.6.1.2.1.243.1.4.1.6
.1.3.6.1.2.1.243.1.4.1.7
Enumeration
.1.3.6.1.2.1.243.1.4.1.8
.1.3.6.1.2.1.243.1.5
.1.3.6.1.2.1.243.1.5.1
.1.3.6.1.2.1.243.1.5.1.1
.1.3.6.1.2.1.243.1.5.1.2
.1.3.6.1.2.1.243.1.5.1.3
.1.3.6.1.2.1.243.1.5.1.4
.1.3.6.1.2.1.243.1.5.1.5
.1.3.6.1.2.1.243.1.5.1.6
.1.3.6.1.2.1.243.1.5.1.7
.1.3.6.1.2.1.243.1.6
.1.3.6.1.2.1.243.1.6.1
Enumeration
.1.3.6.1.2.1.243.1.6.1.1
.1.3.6.1.2.1.243.1.6.1.10
.1.3.6.1.2.1.243.1.6.1.11
.1.3.6.1.2.1.243.1.6.1.2
.1.3.6.1.2.1.243.1.6.1.3
.1.3.6.1.2.1.243.1.6.1.4
.1.3.6.1.2.1.243.1.6.1.5
.1.3.6.1.2.1.243.1.6.1.6
.1.3.6.1.2.1.243.1.6.1.7
.1.3.6.1.2.1.243.1.6.1.8
.1.3.6.1.2.1.243.1.6.1.9
.1.3.6.1.2.1.243.1.7
.1.3.6.1.2.1.243.1.7.1
.1.3.6.1.2.1.243.1.7.1.1
.1.3.6.1.2.1.243.1.7.1.10
.1.3.6.1.2.1.243.1.7.1.11
.1.3.6.1.2.1.243.1.7.1.12
.1.3.6.1.2.1.243.1.7.1.13
.1.3.6.1.2.1.243.1.7.1.14
.1.3.6.1.2.1.243.1.7.1.15
Enumeration
.1.3.6.1.2.1.243.1.7.1.16
.1.3.6.1.2.1.243.1.7.1.17
.1.3.6.1.2.1.243.1.7.1.18
.1.3.6.1.2.1.243.1.7.1.19
.1.3.6.1.2.1.243.1.7.1.2
.1.3.6.1.2.1.243.1.7.1.20
.1.3.6.1.2.1.243.1.7.1.21
.1.3.6.1.2.1.243.1.7.1.22
.1.3.6.1.2.1.243.1.7.1.23
.1.3.6.1.2.1.243.1.7.1.24
.1.3.6.1.2.1.243.1.7.1.25
.1.3.6.1.2.1.243.1.7.1.26
.1.3.6.1.2.1.243.1.7.1.3
.1.3.6.1.2.1.243.1.7.1.4
.1.3.6.1.2.1.243.1.7.1.5
.1.3.6.1.2.1.243.1.7.1.6
.1.3.6.1.2.1.243.1.7.1.7
.1.3.6.1.2.1.243.1.7.1.8
.1.3.6.1.2.1.243.1.7.1.9
.1.3.6.1.2.1.243.1.8
.1.3.6.1.2.1.243.1.8.1
.1.3.6.1.2.1.243.1.8.1.1
Enumeration
.1.3.6.1.2.1.243.1.8.1.10
.1.3.6.1.2.1.243.1.8.1.11
Unsigned32
.1.3.6.1.2.1.243.1.8.1.12
.1.3.6.1.2.1.243.1.8.1.13
.1.3.6.1.2.1.243.1.8.1.14
.1.3.6.1.2.1.243.1.8.1.15
.1.3.6.1.2.1.243.1.8.1.16
.1.3.6.1.2.1.243.1.8.1.2
.1.3.6.1.2.1.243.1.8.1.3
.1.3.6.1.2.1.243.1.8.1.4
.1.3.6.1.2.1.243.1.8.1.5
.1.3.6.1.2.1.243.1.8.1.6
.1.3.6.1.2.1.243.1.8.1.7
.1.3.6.1.2.1.243.1.8.1.8
.1.3.6.1.2.1.243.1.8.1.9
.1.3.6.1.2.1.243.2
.1.3.6.1.2.1.243.2.1
.1.3.6.1.2.1.243.2.2
Dependencies (15) 8 direct · 7 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (9)
These objects are used to monitor/manage
global statistics and parameters.
.1.3.6.1.2.1.243.2.1.1
These objects are used to monitor/manage
BGP-MVPN-specific global parameters.
.1.3.6.1.2.1.243.2.1.2
These objects are used to monitor MVPNs on a PE.
.1.3.6.1.2.1.243.2.1.3
These objects are used to monitor/manage
MVPN-wise BGP-specific parameters.
.1.3.6.1.2.1.243.2.1.4
These objects are used to monitor
I-PMSI and S-PMSI tunnels on a PE.
.1.3.6.1.2.1.243.2.1.5
These objects are used to monitor
the statistics pertaining to I-PMSI and S-PMSI
advertisements sent/received by a PE.
.1.3.6.1.2.1.243.2.1.6
These objects are used to monitor multicast routing
information corresponding to the MVRFs on a PE.
.1.3.6.1.2.1.243.2.1.7
These objects are used to monitor the information on
next hops for routing datagrams to MVPNs on a PE.
.1.3.6.1.2.1.243.2.1.8
Objects required for MVPN notifications.
.1.3.6.1.2.1.243.2.1.9
Compliance Statements (3)

OID .1.3.6.1.2.1.243.2.2.1
Compliance statement for agents that provide full support
for BGP-MPLS-LAYER3-VPN-MULTICAST-MIB.
Required groups
mandatory mvpnScalarGroup
mandatory mvpnGenericGroup
mandatory mvpnPmsiGroup
mandatory mvpnAdvtStatsGroup
mandatory mvpnMrouteGroup
mandatory mvpnMrouteNextHopGroup
mandatory mvpnNotificationGroup
optional mvpnBgpScalarGroup This group is mandatory for systems that support
BGP-MVPN.
optional mvpnBgpGroup This group is mandatory for systems that support
BGP-MVPN.

OID .1.3.6.1.2.1.243.2.2.2
Compliance requirement for implementations that
only provide read-only support for
BGP-MPLS-LAYER3-VPN-MULTICAST-MIB. Such devices
can then be monitored but cannot be configured
using this MIB module.
Required groups
mandatory mvpnScalarGroup
mandatory mvpnGenericGroup
mandatory mvpnPmsiGroup
mandatory mvpnAdvtStatsGroup
mandatory mvpnMrouteGroup
mandatory mvpnMrouteNextHopGroup
mandatory mvpnNotificationGroup
optional mvpnBgpScalarGroup This group is mandatory for systems that support
BGP-MVPN.
optional mvpnBgpGroup This group is mandatory for systems that support
BGP-MVPN.
Object refinements
ObjectAccessSyntaxDescription
mvpnSPTunnelLimit readonly
Write access is not required.
mvpnBgpCmcastRouteWithdrawalTimer readonly
Write access is not required.
mvpnBgpSrcSharedTreeJoinTimer readonly
Write access is not required.
mvpnBgpMsgRateLimit readonly
Write access is not required.
mvpnBgpMaxSpmsiAdRoutes readonly
Write access is not required.
mvpnBgpMaxSpmsiAdRouteFreq readonly
Write access is not required.
mvpnBgpMaxSrcActiveAdRoutes readonly
Write access is not required.
mvpnBgpMaxSrcActiveAdRouteFreq readonly
Write access is not required.

OID .1.3.6.1.2.1.243.2.2.3
Compliance statement for agents that support
the monitoring of the statistics pertaining
to advertisements sent/received by a PE.
Required groups
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.2.1.243.0.1
mvpnMvrfActionTaken notifies about a change
in an MVRF on the PE. The change itself will be given by
mvpnGenMvrfLastAction.