BEGEMOT-SNMPD-MIB Table View

A table with destinations for standard traps.

begemotTrapSinkEntry row .1.3.6.1.4.1.12325.1.1.1.2.1

Entry describes one trap destination.

Indexes

begemotTrapSinkAddr begemotTrapSinkPort

Column	Syntax	OID
begemotTrapSinkAddr Destination IP address of the manager station where to send traps.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.12325.1.1.1.2.1.1
begemotTrapSinkPort Destination UDP port of the manager station where to send traps.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.12325.1.1.1.2.1.2
begemotTrapSinkStatus Used to create/activate/destroy the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12325.1.1.1.2.1.3

A table with the community strings for access control.

begemotSnmpdCommunityEntry row .1.3.6.1.4.1.12325.1.1.1.5.1

A table with the community strings for access control.
When begemotSnmpdCommDisable is true, this table disappears.

Indexes

begemotSnmpdCommunityModule begemotSnmpdCommunityIndex

Column	Syntax	OID
begemotSnmpdCommunityModule Index of the module that has registered this community. For global communities this is the empty string.	SectionName Type Constraints: range: 1..14	.1.3.6.1.4.1.12325.1.1.1.5.1.1
begemotSnmpdCommunityIndex The numerical index of the community (private to the module).	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.12325.1.1.1.5.1.2
begemotSnmpdCommunityString The string for access to SNMPd.	OctetStringr/w	.1.3.6.1.4.1.12325.1.1.1.5.1.3
begemotSnmpdCommunityDescr A description what this community is good for.	OctetString	.1.3.6.1.4.1.12325.1.1.1.5.1.4
begemotSnmpdCommunityPermission The numerical value of access rights granted to the community.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.12325.1.1.1.5.1.5

A table describing all the currently loaded dynamic modules.
Writing to this table loads and unloads modules.

begemotSnmpdModuleEntry row .1.3.6.1.4.1.12325.1.1.1.6.1

A table entry describing a loadable module.

Indexes

begemotSnmpdModuleSection

Column	Syntax	OID
begemotSnmpdModuleSection The string used for matching configuration file sections and indexes the module table.	SectionName Type Constraints: range: 1..14	.1.3.6.1.4.1.12325.1.1.1.6.1.1
begemotSnmpdModulePath The path name of the module. Set to empty string to unload a module. The path of an existing module may not be changed.	OctetStringr/w	.1.3.6.1.4.1.12325.1.1.1.6.1.2
begemotSnmpdModuleComment A comment describing this module.	OctetString	.1.3.6.1.4.1.12325.1.1.1.6.1.3

A table with descriptions of local (unix domain) ports to listen
on for SNMP messages.

begemotSnmpdLocalPortEntry row .1.3.6.1.4.1.12325.1.1.1.9.1

An entry in the table with descriptions of local ports to
listen on for SNMP messages.

Indexes

begemotSnmpdLocalPortPath

Column	Syntax	OID
begemotSnmpdLocalPortPath The path name to create and listen on.	OctetString Constraints: range: 1-104	.1.3.6.1.4.1.12325.1.1.1.9.1.1
begemotSnmpdLocalPortStatus Set status to 1 to create entry, set it to 2 to delete it.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.12325.1.1.1.9.1.2
begemotSnmpdLocalPortType Type of the port. If the type is unpriv SET operations are allowed from all clients if the community matches. For priv SET operations are allowed only from peers with uid zero. If the daemon cannot determine the peer ui…	Enumerationr/w Enumerated Values: 1 dgram-unpriv 2 dgram-priv 3 stream-unpriv 4 stream-priv	.1.3.6.1.4.1.12325.1.1.1.9.1.3

A table containing all the currently loaded transport mappings.

begemotSnmpdTransportEntry row .1.3.6.1.4.1.12325.1.1.1.10.1.1

An entry in the table with the transport mappings.

Indexes

begemotSnmpdTransportName

Column	Syntax	OID
begemotSnmpdTransportName The name of the mapping.	OctetString Constraints: range: 1-256	.1.3.6.1.4.1.12325.1.1.1.10.1.1.1
begemotSnmpdTransportStatus Used to create/activate/destroy the entry.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12325.1.1.1.10.1.1.2
begemotSnmpdTransportOid A pointer to the group with the transport-dependend stuff.	ObjectIdentifier	.1.3.6.1.4.1.12325.1.1.1.10.1.1.3

This table contains all the ports the daemon should listen on.
Entries can be created at initialization time via the config
file or at run time via a SET. One row can map to several open
sockets in the case of InetAddressType::dns rows. These rows
open one socket for each address returned by getaddrinfo(3).
for SNMP messages.

begemotSnmpdTransInetEntry row .1.3.6.1.4.1.12325.1.1.1.11.1

A row of the internet port table. Each row may map to one or
more listening sockets.

Indexes

begemotSnmpdTransInetAddressType begemotSnmpdTransInetAddress begemotSnmpdTransInetPort begemotSnmpdTransInetProto

Column	Syntax	OID
begemotSnmpdTransInetAddressType The type of the address. Only ipv4, ipv6, ipv6z and dns are supported.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.12325.1.1.1.11.1.1
begemotSnmpdTransInetAddress The address. For ipv4 addresses the length must be 4, ipv6 addresses have a length of 16 and ipv6z addresses a length of 20 where the last four bytes are the interface index in big endian format. dns addresses may be of…	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.12325.1.1.1.11.1.2
begemotSnmpdTransInetPort The port to listen on for SNMP messages.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.12325.1.1.1.11.1.3
begemotSnmpdTransInetProto The protocol to use. Currently only the value udp(1) is supported.	BegemotSnmpdTransportProto Type Values: 1 udp	.1.3.6.1.4.1.12325.1.1.1.11.1.4
begemotSnmpdTransInetStatus The status of the conceptual row. A row may be created using createAndGo(4) or createAndWait(5). An inactive row can be activated writing active(1) and an active row can be inactivated by writing notInService(2). Finall…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12325.1.1.1.11.1.5