BEGEMOT-BRIDGE-MIB Table View

A table that contains generic information for each
bridge interface on the managed device.

begemotBridgeBaseEntry row .1.3.6.1.4.1.12325.1.205.1.1.1

A list of information for the bridge interfaces on
the managed device.

Indexes

begemotBridgeBaseName

Column	Syntax	OID
begemotBridgeBaseName The name of the bridge interface for which this entry contains management information.	BridgeIfName Constraints: range: 0-2147483647	.1.3.6.1.4.1.12325.1.205.1.1.1.1
begemotBridgeBaseAddress The MAC address of the bridge interface.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.12325.1.205.1.1.1.2
begemotBridgeBaseNumPorts The number of ports, members of this bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12325.1.205.1.1.1.3
begemotBridgeBaseType Indicates what type of bridging this bridge can perform.	Enumeration Enumerated Values: 1 unknown 2 transparent-only 3 sourceroute-only 4 srt	.1.3.6.1.4.1.12325.1.205.1.1.1.4
begemotBridgeBaseStatus Used to create/destroy bridge interfaces on the managed device.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12325.1.205.1.1.1.5

A table containing generic information about ports,
members of each bridge interface.

begemotBridgeBasePortEntry row .1.3.6.1.4.1.12325.1.205.1.2.1

A list of information about a specific port, member of
a bridge interface.

Indexes

begemotBridgeBaseName begemotBridgeBasePortIfIndex

Column	Syntax	OID
begemotBridgeBasePort The system interface index of the interface corresponding to this port.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.12325.1.205.1.2.1.1
begemotBridgeBasePortIfIndex The value of the instance of the ifIndex object, defined in IF-MIB, for the interface corresponding to this port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.12325.1.205.1.2.1.2
begemotBridgeBaseSpanEnabled The value of this objects reflects whether the port is a span port on the specified bridge interface.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.12325.1.205.1.2.1.3
begemotBridgeBasePortDelayExceededDiscards The number of frames discarded by this port due to excessive transit delay through the bridge.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12325.1.205.1.2.1.4
begemotBridgeBasePortMtuExceededDiscards The number of frames discarded by this port due to an excessive size.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12325.1.205.1.2.1.5
begemotBridgeBasePortStatus Used to control addition of member ports to or removal of member ports from a specified bridge.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12325.1.205.1.2.1.6
begemotBridgeBasePortPrivate The value of this objects reflects whether the port has a PRIVATE flag set. A port with this flags set can only communicate with ports not having the PRIVATE flag set.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12325.1.205.1.2.1.7

A table that contains Spanning Tree Protocol information
for each bridge interface on the managed device.

begemotBridgeStpEntry row .1.3.6.1.4.1.12325.1.205.2.1.1

A list of information about the Spanning Tree Protocol
operation on a bridge interface.

Indexes

No indexes recorded

Column	Syntax	OID
begemotBridgeStpProtocolSpecification The Spanning Tree Protocol version being run on the bridge interface. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol, 'ieee8021d(3)' indicates the bridge is running IEEE 802.1D STP implem…	Enumeration Enumerated Values: 1 unknown 2 decLb100 3 ieee8021d	.1.3.6.1.4.1.12325.1.205.2.1.1.1
begemotBridgeStpPriority The priority value of the bridge interface forming the first two octets of the bridge identifier. Acceptable values are 0-61440, in steps of 4096.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.12325.1.205.2.1.1.2
begemotBridgeStpTimeSinceTopologyChange The time (in hundreds of a second) since a topology change was last detected by this bridge.	centi-secondsSNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12325.1.205.2.1.1.3
begemotBridgeStpTopChanges The number of times a topology change was detected by the bridge interface since the management entity was initialized or reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12325.1.205.2.1.1.4
begemotBridgeStpDesignatedRoot The bridge identifier of the root of the spanning tree as calculated by the Spanning Tree Protocol.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.12325.1.205.2.1.1.5
begemotBridgeStpRootCost The cost of the path from this bridge to the root bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12325.1.205.2.1.1.6
begemotBridgeStpRootPort The port number of the port that offers the lowest cost path from this bridge to the root bridge of the spanning tree. If this bridge is the root bridge, this object shall have a value of zero.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12325.1.205.2.1.1.7
begemotBridgeStpMaxAge The maximum age of Spanning Tree Protocol information received from the network on any port, before that information is discarded. This is the actual value that the bridge is currently using.	centi-secondsBRIDGE-MIBTimeout	.1.3.6.1.4.1.12325.1.205.2.1.1.8
begemotBridgeStpHelloTime The amount of time between transmission of Configuration BPDUs by this bridge on any port, when it is the root of the spanning tree or is trying to become so. This is the actual value that this bridge is currently using.	centi-secondsBRIDGE-MIBTimeout	.1.3.6.1.4.1.12325.1.205.2.1.1.9
begemotBridgeStpHoldTime This time value determines the interval length during which no more than two Configuration BPDUs shall be transmitted by this node, in units of hundredths of a second.	centi-secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12325.1.205.2.1.1.10
begemotBridgeStpForwardDelay This value, measured in units of hundredths of a second determines how long a port will stay consecutively in the Listening and Learning states before transitioning to Forwarding state. This is the actual value currentl…	centi-secondsBRIDGE-MIBTimeout	.1.3.6.1.4.1.12325.1.205.2.1.1.11
begemotBridgeStpBridgeMaxAge The value that all bridges participating in the spanning tree would use for MaxAge if this bridge was the root of the spanning tree.	centi-secondsInteger32r/w Constraints: range: 600-4000	.1.3.6.1.4.1.12325.1.205.2.1.1.12
begemotBridgeStpBridgeHelloTime The value that all bridges participating in the spanning tree would use for HelloTime if this bridge was the root of the spanning tree.	centi-secondsInteger32r/w Constraints: range: 100-1000	.1.3.6.1.4.1.12325.1.205.2.1.1.13
begemotBridgeStpBridgeForwardDelay The value that all bridges participating in the spanning tree would use for ForwardDelay if this bridge was the root of the spanning tree.	centi-secondsInteger32r/w Constraints: range: 400-3000	.1.3.6.1.4.1.12325.1.205.2.1.1.14
begemotBridgeStpVersion The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.1D-1998 and 'rstp(2)' indicates the Rapid Spanning Tree Pro…	Enumerationr/w Enumerated Values: 0 stpCompatible 2 rstp	.1.3.6.1.4.1.12325.1.205.2.1.1.15
begemotBridgeStpTxHoldCount The value used by the Port Transmit state machine to limit the maximum transmission rate of BPDUs on the bridge interface. The value of this object MUST be retained across reinitializations of the managem…	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.12325.1.205.2.1.1.16

A table containing Spanning Tree Protocol information
about the members of each bridge interface.

begemotBridgeStpPortEntry row .1.3.6.1.4.1.12325.1.205.2.2.1

A list of Spanning Tree Protocol information about
a specific member of a bridge interface.

Indexes

begemotBridgeBaseName begemotBridgeBasePortIfIndex

Column	Syntax	OID
begemotBridgeStpPort The system interface index of the interface corresponding to this port, for which the management entity has Spanning Tree Protocol information.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.12325.1.205.2.2.1.1
begemotBridgeStpPortPriority The STP priority of this port that is contained in the first octet of its Port Identifier. The second octet contains the value of begemotBridgeStpPort.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.12325.1.205.2.2.1.2
begemotBridgeStpPortState The current state of the port as defined by the operation of the Spanning Tree Protocol. If the Spanning Tree Protocol is administratively disabled on the port, this object shall have value disabled(1). A value of broke…	Enumeration Enumerated Values: 1 disabled 2 blocking 3 listening 4 learning 5 forwarding 6 broken	.1.3.6.1.4.1.12325.1.205.2.2.1.3
begemotBridgeStpPortEnable The administrative Spanning Tree Protocol state of the port - value of enabled(1) indicates that the port is participating in the Spanning Tree Protocol operation.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.12325.1.205.2.2.1.4
begemotBridgeStpPortPathCost The contribution of the path through this port, when the port is the Root Port, to the total cost of the path to the root bridge for this bridge.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.12325.1.205.2.2.1.5
begemotBridgeStpPortDesignatedRoot The unique Bridge Identifier of the bridge recorded as the root in the Root Identifier parameter of Configuration BPDUs transmitted by the Designated Bridge for the LAN to which the port is attached.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.12325.1.205.2.2.1.6
begemotBridgeStpPortDesignatedCost For a Designated port, the path cost (equal to the Root Path Cost of the bridge) offered to the LAN to which the port is attached otherwise the cost of the path to the Root offered by the Designated Port on the LAN to w…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12325.1.205.2.2.1.7
begemotBridgeStpPortDesignatedBridge The unique Bridge Identifier of the bridge to which the port belongs, in the case when the port is a designated port, otherwise the bridge believed to be the Designated Bridge for the LAN to which this port is attached.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.12325.1.205.2.2.1.8
begemotBridgeStpPortDesignatedPort The Port Identifier of the Bridge port, on the Designated Bridge, through which the Designated Bridge transmits the Configuration Message information stored by this port.	BridgePortId Type Constraints: range: 2	.1.3.6.1.4.1.12325.1.205.2.2.1.9
begemotBridgeStpPortForwardTransitions The number of times this port has transitioned from the Learning state to the Forwarding state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12325.1.205.2.2.1.10

A table that contains port-specific Rapid Spanning Tree
information for the bridge interface members.

begemotBridgeStpExtPortEntry row .1.3.6.1.4.1.12325.1.205.2.3.1

A list of Rapid Spanning Tree information maintained by
each bridge interface member.

Indexes

No indexes recorded

Column	Syntax	OID
begemotBridgeStpPortProtocolMigration When operating in RSTP (version 2) mode, writing true(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns false(2) when read.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12325.1.205.2.3.1.1
begemotBridgeStpPortAdminEdgePort The administrative value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) indicates that this port should be assumed as a non-edge-port. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12325.1.205.2.3.1.2
begemotBridgeStpPortOperEdgePort The operational value of the Edge Port parameter. The object is initialized to the value of the corresponding instance of begemotBridgeStpPortAdminEdgePort. When the corresponding instance of begemotBridgeStpPortAdminEd…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12325.1.205.2.3.1.3
begemotBridgeStpPortAdminPointToPoint The administrative point-to-point status of the LAN segment attached to this port, using the enumeration values of the IEEE 802.1w clause. A value of forceTrue(0) indicates that this port should always be treated as if…	Enumerationr/w Enumerated Values: 0 forceTrue 1 forceFalse 2 auto	.1.3.6.1.4.1.12325.1.205.2.3.1.4
begemotBridgeStpPortOperPointToPoint The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection. If adminPointToPointMAC is set to auto(2), then the value of…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12325.1.205.2.3.1.5
begemotBridgeStpPortAdminPathCost The administratively assigned value for the contribution of this port to the path cost of paths toward the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost…	Integer32r/w Constraints: range: 0-200000000	.1.3.6.1.4.1.12325.1.205.2.3.1.6

A table that contains information regarding transparent
bridging for each bridge interface on the managed device.

begemotBridgeTpEntry row .1.3.6.1.4.1.12325.1.205.3.1.1

A list of information regarding transparent bridging
on a bridge interface.

Indexes

No indexes recorded

Column	Syntax	OID
begemotBridgeTpLearnedEntryDiscards The total number of Forwarding Database entries that would have been learnt, but have been discarded due to Forwarding Address Table having reached it's maximum entries limit.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12325.1.205.3.1.1.1
begemotBridgeTpAgingTime The timeout period in seconds before aging out dynamically learnt forwarding entries.	secondsInteger32r/w Constraints: range: 10-1000000	.1.3.6.1.4.1.12325.1.205.3.1.1.2
begemotBridgeTpMaxAddresses The maximum number of entires that this bridge can learn in it's Forwarding Address Table and use for making forwarding decisions.	Integer32r/w Constraints: range: 1-10000	.1.3.6.1.4.1.12325.1.205.3.1.1.3

A table that contains information about unicast entries
for which the bridge interfaces have forwarding and/or
filtering information. This information is used by the
bridge interfaces to make forwarding decisions.

begemotBridgeTpFdbEntry row .1.3.6.1.4.1.12325.1.205.3.2.1

Information about a specific unicast MAC address
for which the bridge interface has some forwarding
and/or filtering information.

Indexes

begemotBridgeBaseName begemotBridgeTpFdbAddress

Column	Syntax	OID
begemotBridgeTpFdbAddress A unicast MAC address for which the bridge has which the bridge interface has some forwarding and/or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.12325.1.205.3.2.1.1
begemotBridgeTpFdbPort The port number of the bridge port on which a frame having a source address equal to the value of the corresponding instance of begemotBridgeTpFdbAddress has been seen.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12325.1.205.3.2.1.2
begemotBridgeTpFdbStatus The status of this entry. The meanings of the values are: other(1) - none of the following. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flush…	Enumeration Enumerated Values: 1 other 2 invalid 3 learned 4 self 5 mgmt	.1.3.6.1.4.1.12325.1.205.3.2.1.3

A table that contains information about every bridge port,
member of a bridge interface, associated with the transparent
bridging function of the bridge.

begemotBridgeTpPortEntry row .1.3.6.1.4.1.12325.1.205.3.3.1

A list of information about every bridge port, member of a
bridge interface, associated with the bridge's transparent
bridging function.

Indexes

begemotBridgeBaseName begemotBridgeBasePortIfIndex

Column	Syntax	OID
begemotBridgeTpPort The system interface index of the port for which this entry contains Transparent bridging management information.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.12325.1.205.3.3.1.1
begemotBridgeTpPortMaxInfo The maximum size of the INFO (non-MAC) field that this port will receive or transmit.	bytesSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12325.1.205.3.3.1.2
begemotBridgeTpPortInFrames The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol bein…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12325.1.205.3.3.1.3
begemotBridgeTpPortOutFrames The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol …	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12325.1.205.3.3.1.4
begemotBridgeTpPortInDiscards Count of received valid frames that were discarded (i.e., filtered) by the Forwarding Process.	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12325.1.205.3.3.1.5