BAY-STACK-MULTICAST-FLOODING-MIB Table View

This table is used to specify particular multicast MAC addresses
that are allowed to be flooded to all ports.

bsmfAllowedAddressEntry row .1.3.6.1.4.1.45.5.6.2.1

An entry in the bsmfAllowedAddressTable.

Indexes

bsmfAllowedAddressMacAddr

Column	Syntax	OID
bsmfAllowedAddressMacAddr A MAC address that is allowed to flood all ports.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.45.5.6.2.1.1
bsmfAllowedAddressRowStatus This object controls creation and deletion of rows in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.5.6.2.1.2

This table is used to specify particular multicast IP addresses
that are allowed to be flooded to all ports.

bsmfAllowedInetAddressEntry row .1.3.6.1.4.1.45.5.6.3.1

An entry in the bsmfAllowedInetAddressTable.

Indexes

bsmfAllowedInetAddressType bsmfAllowedInetAddress

Column	Syntax	OID
bsmfAllowedInetAddressType The type of address contained in the corresponding instance of bsmfAllowedInetAddress. Currently, only values of ipv4(1) and ipv6(2) are allowed.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.45.5.6.3.1.1
bsmfAllowedInetAddress A multicast IP address that is allowed to flood all ports. Unicast and broadcast addresses are not allowed.	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.45.5.6.3.1.2
bsmfAllowedInetAddressRowStatus This object controls creation and deletion of rows in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.5.6.3.1.3

This table is used to control per-VLAN whether multicast flooding
is enabled.

bsmfVlanEntry row .1.3.6.1.4.1.45.5.6.4.1

An entry in the bsmfVlanTable.

Indexes

bsmfVlanId

Column	Syntax	OID
bsmfVlanId An existing VLAN.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.45.5.6.4.1.1
bsmfVlanMulticastFloodingEnabled This object indicates whether filtering of multicast MAC addresses to be flooded is enabled on a per-vlan basis. If the value of this object is false(2), then multicast packets are always flooded to all ports of a vlan…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.45.5.6.4.1.2

This table is used to specify particular multicast MAC addresses
that are allowed to be flooded to all ports on a per-vlan basis.

bsmfVlanAllowedAddressEntry row .1.3.6.1.4.1.45.5.6.5.1

An entry in the bsmfVlanAllowedAddressTable.

Indexes

bsmfVlanAllowedAddressVlanId bsmfVlanAllowedAddressMacAddr

Column	Syntax	OID
bsmfVlanAllowedAddressVlanId An existing VLAN ID.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.45.5.6.5.1.1
bsmfVlanAllowedAddressMacAddr A MAC address that is allowed to flood all ports.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.45.5.6.5.1.2
bsmfVlanAllowedAddressRowStatus This object controls creation and deletion of rows in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.5.6.5.1.3

This table is used to specify particular multicast IP addresses
that are allowed to be flooded to all ports on a per-vlan basis.

bsmfVlanAllowedInetAddressEntry row .1.3.6.1.4.1.45.5.6.6.1

An entry in the bsmfVlanAllowedInetAddressTable.

Indexes

bsmfVlanAllowedInetAddressVlanId bsmfVlanAllowedInetAddressType bsmfVlanAllowedInetAddress

Column	Syntax	OID
bsmfVlanAllowedInetAddressVlanId An existing VLAN ID.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.45.5.6.6.1.1
bsmfVlanAllowedInetAddressType The type of address contained in the corresponding instance of bsmfVlanAllowedInetAddress. Currently, only values of ipv4(1) and ipv6(2) are allowed.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.45.5.6.6.1.2
bsmfVlanAllowedInetAddress A multicast IP address that is allowed to flood all ports. Unicast and broadcast addresses are not allowed.	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.45.5.6.6.1.3
bsmfVlanAllowedInetAddressRowStatus This object controls creation and deletion of rows in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.5.6.6.1.4