BASIS-SHELF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
19

shelfTable

table mandatory
.1.3.6.1.4.1.351.110.1.1.1 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk shelfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BASIS-SHELF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BASIS-SHELF-MIB::shelfTable' 
The table has the Physical slot number and state of the cards
shelfEntry row .1.3.6.1.4.1.351.110.1.1.1.1
An entry for the slot
Indexes
Column Syntax OID
shelfNummandatory
A unique value for each shelf. Its value
ranges between 1 and the maxvalue of shelfNumber.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.351.110.1.1.1.1.1
shelfSlotNummandatory
Slot number of a card.
BASIS can have maximum 16 slots in one shelf.
17 is used to reset the whole shelf.
Some MGX Series can have maximum 32 slots in one shelf.
33 is used to reset the whole shelf.
For MGX8220:
INTE…
Integer32
Constraints:
range: 1-33
 .1.3.6.1.4.1.351.110.1.1.1.1.2
shelfBkplnSerialNumDeprecatedmandatory
This entry has been deprecated. It is available as the 9th
entry in basisShelf. It is included here to prevent a hole
in the shelfEntry table.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.351.110.1.1.1.1.3
shelfFunctionModuleStatemandatory
This object holds the status of a card in a particular shelf-slot.
The hold state is applicable only to MGX8800 Platform.
The Slave PXM assumes the hold state during PXM Upgrades. In this
state the Slave PXM will be ru…
Enumeration
Enumerated Values:
1nocard
2standby
3active
4failed
5selfTest
6heldInReset
7boot
8mismatch
9unknown
10coreCardMismatch
11blocked
12reserved
13hold
14notResponding
17cardinit
 .1.3.6.1.4.1.351.110.1.1.1.1.4
shelfFunctionModuleTypemandatory
This object holds the type of a card in
a particular shelf-slot.
Enumeration
Enumerated Values:
1other
2asc
10bnm-T3
11bnm-E3
12bnm-155
20srm-4T1E1
21srm-3T3
22srme-1OC3
23srme-1STS3
24srme-NOBC
25srm-3T3-NOBC
30frsm-4T1
31frsm-4E1
32frsm-4T1-C
33frsm-4E1-C
34frsm-hs1
35frsm-8T1
36frsm-8E1
37frsm-hs1b
40ausm-4T1
41ausm-4E1
50ausm-8T1
51ausm-8E1
52ausmB-8T1
53ausmB-8E1
60cesm-4T1
61cesm-4E1
70imatm-T3T1
71imatm-E3E1
72imatmB-T1
73imatmB-E1
80frasm-8T1
90cesm-8T1
91cesm-8E1
100bscsm-2
101bscsm-4
110atmt-8T1
111atmt-8E1
120frt-8T1
121frt-8E1
130frsm-2ct3
131frsm-2t3
132frsm-2e3
133frsm-hs2
134frsm-2t3b
135frsm-2e3b
136frsm-hs2b-hssi
137frsm-hs2b-12In1
140cesm-T3
141cesm-E3
150vism-8T1
151vism-8E1
1000pxm1
1001pxm1-2t3e3
1002pxm1-4oc3
1003pxm1-oc12
2000rpm
2001rpm-pr
 .1.3.6.1.4.1.351.110.1.1.1.1.5
shelfFunctionModuleHoldResetmandatory
This object holds the card in
a particular shelf-slot, in reset,
If the object is set to holdInReset.
If the object is set to doNotHold, then
it only reset the card in the specified
slot, if slot number is 17 then i…
Enumerationr/w
Enumerated Values:
1doNotHold
2holdInReset
 .1.3.6.1.4.1.351.110.1.1.1.1.6

shelfCBClkRateTable

table mandatory
.1.3.6.1.4.1.351.110.1.1.22 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk shelfCBClkRateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BASIS-SHELF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BASIS-SHELF-MIB::shelfCBClkRateTable' 
The table has the Clock Rates of each Cell Bus
shelfCBClkRateEntry row .1.3.6.1.4.1.351.110.1.1.22.1
An entry for the Cell Bus
Indexes
Column Syntax OID
cBNummandatory
The number (1-8) designation for the Cell Bus.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.351.110.1.1.22.1.1
clkRatemandatory
The Cell Bus Clock Rate designation.
Enumerationr/w
Enumerated Values:
1twentyOne-Mhz
2fortyTwo-Mhz
 .1.3.6.1.4.1.351.110.1.1.22.1.2

smRedMapTable

table mandatory
.1.3.6.1.4.1.351.110.1.3.1 · 1 row entry · 11 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk smRedMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BASIS-SHELF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BASIS-SHELF-MIB::smRedMapTable' 
The table has the redundancy map for a service module.
This table is for configuring redundancy for service modules.
This table might contain entries for Core-Card set,in some 
implementations.
smRedMapEntry row .1.3.6.1.4.1.351.110.1.3.1.1
An entry for module(Service Module,Core-Card set) redundancy.
Some implementations might have entries for the core-card set.
The entries for core-card set may not be added , modified or deleted.
An entry has to be crea…
Indexes
Column Syntax OID
redPrimarySlotNummandatory
The index to the table. This is the slot number of the
primary module in the redundant configuration.

For MGX8850 Release 1.x,skip PXM slot 7,8,23,24, SRM slot 15,16,31,32.

For MGX8220(For…
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.351.110.1.3.1.1.1
redRowStatusmandatory
This will add, delete or modify the redundancy
Note that mod is NOT used but it is there for consistency.

This object is for creating and deleting an entry in
smRedMapTable.
This object is set to add(1) t…
Enumerationr/w
Enumerated Values:
1add
2del
3mod
 .1.3.6.1.4.1.351.110.1.3.1.1.2
redPrimaryTypemandatory
This object holds the type of the primary card
Some of the card types are not supported in the table but
they are defined here for consistency with the shelf card types.
Enumeration
Enumerated Values:
1other
2bsc
10aum-T3
20tim
30frsm-4T1
31frsm-4E1
34frsm-hs1
35frsm-8T1
36frsm-8E1
37frsm-hs1b
40ausm-4T1
41ausm-4E1
50ausm-8T1
51ausm-8E1
52ausmB-8T1
53ausmB-8E1
60cesm-4T1
61cesm-4E1
70imatm-T3T1
71imatm-E3E1
72imatmB-T1
73imatmB-E1
80frasm-8T1
90cesm-8T1
91cesm-8E1
100bscsm-2
101bscsm-4
110atmt-8T1
111atmt-8E1
120frt-8T1
121frt-8E1
130frsm-2ct3
131frsm-2t3
132frsm-2e3
133frsm-hs2
134frsm-2t3b
135frsm-2e3b
136frsm-hs2b-hssi
137frsm-hs2b-12In1
140cesm-T3
141cesm-E3
150vism-8T1
151vism-8E1
1000pxm1
1001pxm1-2t3e3
1002pxm1-4oc3
1003pxm1-oc12
2000rpm
2001rpm-pr
 .1.3.6.1.4.1.351.110.1.3.1.1.3
redPrimaryStatemandatory
This object holds the state of the primary card
Some of the states are not supported in the table but
they are defined here for consistency with the cardStates.
heldInReset, boot and unknown are not supported.
…
Enumeration
Enumerated Values:
1nocard
2standby
3active
4failed
5selfTest
6heldInReset
7boot
8mismatch
9unknown
10unusedCoreCardMisMatch
11blocked
12reserved
13unusedHold
14notResponding
17cardinit
 .1.3.6.1.4.1.351.110.1.3.1.1.4
redSecondarySlotNummandatory
This is the slot number of the redundant card for the
primary card. SecondarySlotNum will be 0 when no secondary
card covering the primary card. SecondarySlotNum in case
of MGX8850 shloud be from the same half of the sh…
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.351.110.1.3.1.1.5
redSecondaryTypemandatory
This object holds the type of the redundant card
Note that redSecondaryType is the same as redPrimaryType
unless it is changed for a new service module.
Some of the card types are not supported in the table but
they are…
Enumeration
Enumerated Values:
1other
2bsc
10aum-T3
20tim
30frsm-4T1
31frsm-4E1
34frsm-hs1
35frsm-8T1
36frsm-8E1
37frsm-hs1b
40ausm-4T1
41ausm-4E1
50ausm-8T1
51ausm-8E1
52ausmB-8T1
53ausmB-8E1
60cesm-4T1
61cesm-4E1
70imatm-T3T1
71imatm-E3E1
72imatmB-T1
73imatmB-E1
80frasm-8T1
90cesm-8T1
91cesm-8E1
100bscsm-2
101bscsm-4
110atmt-8T1
111atmt-8E1
120frt-8T1
121frt-8E1
130frsm-2ct3
131frsm-2t3
132frsm-2e3
133frsm-hs2
134frsm-2t3b
135frsm-2e3b
136frsm-hs2b-hssi
137frsm-hs2b-12In1
140cesm-T3
141cesm-E3
150vism-8T1
151vism-8E1
1000pxm1
1001pxm1-2t3e3
1002pxm1-4oc3
1003pxm1-oc12
2000rpm
2001rpm-pr
 .1.3.6.1.4.1.351.110.1.3.1.1.6
redSecondaryStatemandatory
This object holds the state of the secondary card

Supported values are :

nocard (1) : Module not present in the slot
standby (2) : Module is in 'standby' state
active (3) : Module is in '…
Enumeration
Enumerated Values:
1nocard
2standby
3active
4failed
5selfTest
6heldInReset
7boot
8mismatch
9unknown
10unusedCoreCardMisMatch
11blocked
12reserved
13unusedHold
14notResponding
17cardinit
 .1.3.6.1.4.1.351.110.1.3.1.1.7
redTypemandatory
This object describes the type of redundancy.
The supported values are :
yCable (1) : 1:1 (y cable) redundancy configuration. In this
configuration,there is only one module which acts
as the backup…
Enumerationr/w
Enumerated Values:
1yCable
2oneToN
 .1.3.6.1.4.1.351.110.1.3.1.1.8
redCoveringSlotmandatory
This is the slot number of the primary card for which
the secondary card is covering
Note that redCoveringSlot is set to 0 when the primary
is not being protected. If this primary card is being
protected by its redu…
Integer32
Constraints:
range: 0-32
 .1.3.6.1.4.1.351.110.1.3.1.1.9
redFeaturemandatory
This is the feature of the primary card.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.1.3.1.1.10
redLineModuleTypemandatory
This is the line module type for the primary card.
This object is NOT configurable and it only has the type
of the current line module that is present in this slot.
Note that the types that end with a -R are of redunda…
Enumeration
Enumerated Values:
16lm-DB15-4T1
17lm-DB15-4E1
18lm-BNC-4E1
19lm-DB15-4T1-R
20lm-DB15-4E1-R
21lm-BNC-4E1-R
22lm-RJ48-8T1
23lm-RJ48-8E1
24lm-SMB-8E1
25lm-RJ48-T3T1
26lm-RJ48-E3E1
27lm-RJ48-T3E1
28lm-SMB-E3E1
29lm-RJ48-E3T1
30lm-SMB-T3E1
32lm-T3E3-D
33lm-T3E3-B
48lm-RJ48-8T1-R
49lm-RJ48-8E1-R
50lm-SMB-8E1-R
60lm-HS1-4X21
61lm-HS1-3HSSI
62lm-HS1-4V35
63lm-12In1-8s
 .1.3.6.1.4.1.351.110.1.3.1.1.11