BACHMANN-BNPRO-DEVICE-CONFIG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
25

bnProConfigNetworkInterfaceTable

table
.1.3.6.1.4.1.31770.10.5.1.2.6 · 1 row entry · 4 columns
Open in standard view
Uses the bachmann variant from /opt/observium/mibs/bachmann.
Command help
Walk bnProConfigNetworkInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BACHMANN-BNPRO-DEVICE-CONFIG-MIB' -M '/opt/observium/mibs/bachmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BACHMANN-BNPRO-DEVICE-CONFIG-MIB::bnProConfigNetworkInterfaceTable' 
Network interface table. Each row represents one configurable physical or logical network interface.
bnProConfigNetworkInterfaceEntry row .1.3.6.1.4.1.31770.10.5.1.2.6.1
Basic configurable properties of one network interface. IPv4 and IPv6 settings are represented in separate tables using the same interface index.
Indexes
Column Syntax OID
bnProConfigNetworkInterfaceIndex
Stable numeric index of the network interface.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.31770.10.5.1.2.6.1.1
bnProConfigNetworkInterfaceName
Interface name, for example eth0 or eth1.
SNMPv2-TCDisplayString
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31770.10.5.1.2.6.1.2
bnProConfigNetworkInterfaceEnabled
Enables or disables the network interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.31770.10.5.1.2.6.1.3
bnProConfigNetworkInterfaceMacAddress
MAC address of this interface.
SNMPv2-TCDisplayString
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31770.10.5.1.2.6.1.4

bnProConfigIpv4Table

table
.1.3.6.1.4.1.31770.10.5.1.2.7 · 1 row entry · 6 columns
Open in standard view
Uses the bachmann variant from /opt/observium/mibs/bachmann.
Command help
Walk bnProConfigIpv4Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BACHMANN-BNPRO-DEVICE-CONFIG-MIB' -M '/opt/observium/mibs/bachmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BACHMANN-BNPRO-DEVICE-CONFIG-MIB::bnProConfigIpv4Table' 
IPv4 configuration table. Each row uses the network interface index.
bnProConfigIpv4Entry row .1.3.6.1.4.1.31770.10.5.1.2.7.1
IPv4 configuration for one network interface.
Indexes
Column Syntax OID
bnProConfigIpv4Enabled
Enables or disables IPv4 on this interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.31770.10.5.1.2.7.1.1
bnProConfigIpv4DhcpEnabled
Enables or disables DHCPv4 on this interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.31770.10.5.1.2.7.1.2
bnProConfigIpv4Address
Current effective IPv4 address of this interface, for example the DHCP assigned address shown in the Web UI.
SNMPv2-TCDisplayString
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31770.10.5.1.2.7.1.3
bnProConfigIpv4ManualAddress
Configured manual IPv4 address and prefix, corresponding to the Web UI Manual IP field. Empty when no manual IPv4 address is configured.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31770.10.5.1.2.7.1.4
bnProConfigIpv4PrefixLength
Configured IPv4 prefix length for the manual IPv4 address.
Unsigned32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.31770.10.5.1.2.7.1.5
bnProConfigIpv4Gateway
Configured IPv4 gateway for this interface.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31770.10.5.1.2.7.1.6

bnProConfigIpv6Table

table
.1.3.6.1.4.1.31770.10.5.1.2.8 · 1 row entry · 7 columns
Open in standard view
Uses the bachmann variant from /opt/observium/mibs/bachmann.
Command help
Walk bnProConfigIpv6Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BACHMANN-BNPRO-DEVICE-CONFIG-MIB' -M '/opt/observium/mibs/bachmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BACHMANN-BNPRO-DEVICE-CONFIG-MIB::bnProConfigIpv6Table' 
IPv6 configuration table. Each row uses the network interface index.
bnProConfigIpv6Entry row .1.3.6.1.4.1.31770.10.5.1.2.8.1
IPv6 configuration for one network interface.
Indexes
Column Syntax OID
bnProConfigIpv6Enabled
Enables or disables IPv6 on this interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.31770.10.5.1.2.8.1.1
bnProConfigIpv6DhcpMode
DHCPv6 mode for this interface. The autoDhcpv6AndAutoconfig mode corresponds to the Web UI mode Auto (DHCPv6 + Autoconfig).
Enumerationr/w
Enumerated Values:
1disabled
2autoDhcpv6AndAutoconfig
3dhcpv6Only
4autoconfigOnly
 .1.3.6.1.4.1.31770.10.5.1.2.8.1.2
bnProConfigIpv6Address
Configured manual IPv6 address. Empty when DHCPv6 or autoconfiguration is used.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31770.10.5.1.2.8.1.3
bnProConfigIpv6PrefixLength
Configured IPv6 prefix length.
Unsigned32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.31770.10.5.1.2.8.1.4
bnProConfigIpv6LinkLocalAddress
Current IPv6 link-local address of this interface.
SNMPv2-TCDisplayString
Constraints:
range: 0-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31770.10.5.1.2.8.1.5
bnProConfigIpv6AutoconfigEnabled
Enables or disables IPv6 stateless address autoconfiguration on this interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.31770.10.5.1.2.8.1.6
bnProConfigIpv6Gateway
Configured IPv6 gateway for this interface.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31770.10.5.1.2.8.1.7

bnProConfigTrapReceiverTable

table
.1.3.6.1.4.1.31770.10.5.1.8.1 · 1 row entry · 8 columns
Open in standard view
Uses the bachmann variant from /opt/observium/mibs/bachmann.
Command help
Walk bnProConfigTrapReceiverTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BACHMANN-BNPRO-DEVICE-CONFIG-MIB' -M '/opt/observium/mibs/bachmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BACHMANN-BNPRO-DEVICE-CONFIG-MIB::bnProConfigTrapReceiverTable' 
SNMP trap receiver configuration table.
bnProConfigTrapReceiverEntry row .1.3.6.1.4.1.31770.10.5.1.8.1.1
Configuration of one SNMP trap receiver.
Indexes
Column Syntax OID
bnProConfigTrapReceiverIndex
Stable numeric index of the SNMP trap receiver.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.31770.10.5.1.8.1.1.1
bnProConfigTrapReceiverEnabled
Whether this SNMP trap receiver is enabled. There is no per-receiver
enable flag: a receiver exists only while it is configured, so this
always reports true(1).
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.31770.10.5.1.8.1.1.2
bnProConfigTrapReceiverAddress
Configured SNMP trap receiver address.
SNMPv2-TCDisplayString
Constraints:
range: 0-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31770.10.5.1.8.1.1.3
bnProConfigTrapReceiverPort
SNMP trap receiver port. No per-receiver port is stored; this always
reports the default trap port 162.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.31770.10.5.1.8.1.1.4
bnProConfigTrapReceiverVersion
Configured SNMP trap receiver version.
Enumeration
Enumerated Values:
1v1
2v2c
3v3
 .1.3.6.1.4.1.31770.10.5.1.8.1.1.5
bnProConfigTrapReceiverCommunity
Configured SNMP trap receiver community, masked with asterisks so the
secret is not exposed over SNMP.
SNMPv2-TCDisplayString
Constraints:
range: 0-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31770.10.5.1.8.1.1.6
bnProConfigTrapReceiverName
Name of this SNMP trap receiver.
SNMPv2-TCDisplayString
Constraints:
range: 0-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31770.10.5.1.8.1.1.7
bnProConfigTrapReceiverRowStatus
Row status for this SNMP trap receiver. Rows cannot be created or
destroyed over SNMP, so this always reports active(1).
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.31770.10.5.1.8.1.1.8