AtiStackSwitch9000-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

564

atiStkSwSysProductInfoTable

table

.1.3.6.1.4.1.207.8.17.1.3 · 1 row entry · 25 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwSysProductInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwSysProductInfoTable'

This table contains a list of modules present in the switch
stack and their associated hardware information.

atiStkSwSysProductInfoEntry row .1.3.6.1.4.1.207.8.17.1.3.1

This object specifies an entry in 'atiStkSwSysProductInfoTable'
that describes the hardware informaton for a module present in
the switch stack.

Indexes

atiStkSwSysModuleId

Column Syntax OID

atiStkSwSysModuleId

The ID of this module.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.207.8.17.1.3.1.1

atiStkSwSysProductType

The product type of this module.

AtiProductType

Type Values:

1	other
2	at8324
3	at8316F-MT
4	at8316F-VF
5	at8316F-SC
6	at8524M
7	at8550GB
8	at8516F
9	at8550SP
10	at9424T-SP
11	at9424T-GB
12	at9408LC-SP
13	at8524-POE
14	at9424Ti-SP
15	at9448Ts-XP
16	at9448Ts
17	at9448T-SP
18	at9424Ts-XP
19	at9424Ts
21	at9424T
22	at9424T-POE
23	at9000_28SP
24	at9000T_28SP
25	at9000-52T
26	at8100S-24
27	at8100S-24POE
28	at8100S-48
29	at8100S-48POE
30	at8100S-16F8-SC
31	at8100S-24F-LC
32	at8100S-24F-Bidi
33	at8100-8
34	at8100-8POE
35	at8100S_24C

.1.3.6.1.4.1.207.8.17.1.3.1.2

atiStkSwSysMacAddress

The system MAC address used by this module.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.207.8.17.1.3.1.3

atiStkSwSysSwName

The name of the system software running on this module.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.207.8.17.1.3.1.4

atiStkSwSysSwVersion

The version of the system software running on this module.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.207.8.17.1.3.1.5

atiStkSwSysHwName

The name of the module hardware.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.207.8.17.1.3.1.6

atiStkSwSysHwRevision

The revision number of the module hardware.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.207.8.17.1.3.1.7

atiStkSwSysSerialNumber

The serial number of the module.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.207.8.17.1.3.1.8

atiStkSwSysTotalPortCount

Total number of ports (base and uplink) present on this
module.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.1.3.1.9

atiStkSwSysBasePortType

The hardware type of a base port on this module.

AtiPortType

Type Values:

1	other
2	notPresent
3	mgmt
4	tenBaseT
5	hundredBaseT
6	hundredBaseFX-VF
7	hundredBaseFX-MT
8	hundredBaseFX-SC
9	hundredBaseFX-LC
10	thousandBaseT
11	gigabit
12	gigabitSX
13	gigabitSX-SC
14	gigabitSX-MT
15	gigabitSX-VF
16	gigabitSX-LC
17	gigabitLX
18	gigabitLX-SC
19	gigabitLX-MT
20	gigabitLX-VF
21	gigabitLX-LC
22	sm15
23	ten-gigabit
24	hundredBaseFX
25	hundredFX-LC
26	hundredBaseLX-LX10
27	thousandBaseCX
28	thousandBaseLX
29	thousandBaseSX

.1.3.6.1.4.1.207.8.17.1.3.1.10

atiStkSwSysBasePortCount

Total number of base ports present on this module.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.1.3.1.11

atiStkSwSysUplinkAModelName

The model name of the uplink #A connector of this module.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.207.8.17.1.3.1.12

atiStkSwSysUplinkAPortType

The hardware type of a port present in the uplink #A
connector of this module.

AtiPortType

Type Values:

1	other
2	notPresent
3	mgmt
4	tenBaseT
5	hundredBaseT
6	hundredBaseFX-VF
7	hundredBaseFX-MT
8	hundredBaseFX-SC
9	hundredBaseFX-LC
10	thousandBaseT
11	gigabit
12	gigabitSX
13	gigabitSX-SC
14	gigabitSX-MT
15	gigabitSX-VF
16	gigabitSX-LC
17	gigabitLX
18	gigabitLX-SC
19	gigabitLX-MT
20	gigabitLX-VF
21	gigabitLX-LC
22	sm15
23	ten-gigabit
24	hundredBaseFX
25	hundredFX-LC
26	hundredBaseLX-LX10
27	thousandBaseCX
28	thousandBaseLX
29	thousandBaseSX

.1.3.6.1.4.1.207.8.17.1.3.1.13

atiStkSwSysUplinkAPortCount

Total number of uplink #A ports present on this module.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.1.3.1.14

atiStkSwSysUplinkAPortIdBase

The ID of the first port in uplink #A of this module.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.1.3.1.15

atiStkSwSysUplinkAPortIdLimit

The ID of the last port in uplink #A of this module.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.1.3.1.16

atiStkSwSysUplinkBModelName

The model name of the uplink #B connector of this module.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.207.8.17.1.3.1.17

atiStkSwSysUplinkBPortType

The hardware type of a port present in the uplink #B
connector of this module.

AtiPortType

Type Values:

1	other
2	notPresent
3	mgmt
4	tenBaseT
5	hundredBaseT
6	hundredBaseFX-VF
7	hundredBaseFX-MT
8	hundredBaseFX-SC
9	hundredBaseFX-LC
10	thousandBaseT
11	gigabit
12	gigabitSX
13	gigabitSX-SC
14	gigabitSX-MT
15	gigabitSX-VF
16	gigabitSX-LC
17	gigabitLX
18	gigabitLX-SC
19	gigabitLX-MT
20	gigabitLX-VF
21	gigabitLX-LC
22	sm15
23	ten-gigabit
24	hundredBaseFX
25	hundredFX-LC
26	hundredBaseLX-LX10
27	thousandBaseCX
28	thousandBaseLX
29	thousandBaseSX

.1.3.6.1.4.1.207.8.17.1.3.1.18

atiStkSwSysUplinkBPortCount

Total number of uplink #B ports present on this module.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.1.3.1.19

atiStkSwSysUplinkBPortIdBase

The ID of the first port in uplink #B of this module.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.1.3.1.20

atiStkSwSysUplinkBPortIdLimit

The ID of the last port in uplink #B of this module.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.1.3.1.21

atiStkSwSysRPSPresent

This object shows the presence of the RPS (Redundant Power Supply.)

Note: This is not available on the 83xx switch family.

Enumeration

Enumerated Values:

1	connected
2	disconnected

.1.3.6.1.4.1.207.8.17.1.3.1.22

atiStkSwSysRPSState

This object shows if the connected RPS is on (supplying power)
or off (not supplying power) to this switch.

Note: This is not available on the 83xx switch family.

Enumeration

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.207.8.17.1.3.1.23

atiStkSwSysDCState

This object shows if the main Power Source is DC.

Note: If this is Off and RPS State is off, then the
AC Main is supllying power.

Note: This is not available on the 83xx switch family.

Enumeration

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.207.8.17.1.3.1.24

atiStkSwSysTemperatureLimitValue

This object specifies the temperature value when it is above the
Warning or Error limits.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.1.3.1.25

atiStkSwSysUplinkInfoTable

table

.1.3.6.1.4.1.207.8.17.1.4 · 1 row entry · 6 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwSysUplinkInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwSysUplinkInfoTable'

This table contains a list of uplinks present in the switch
stack and their associated hardware information.

atiStkSwSysUplinkInfoEntry row .1.3.6.1.4.1.207.8.17.1.4.1

This object specifies an entry in 'atiStkSwSysUplinkInfoTable'
that describes the hardware informaton for a uplink present in
the switch stack. **Note:This table may only be available with 94xx
series of switches. Pleas…

Indexes

atiStkSwSysUplinkModuleId atiStkSwSysUplinkPortId

Column Syntax OID

atiStkSwSysUplinkModuleId

The ID of this module.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.207.8.17.1.4.1.1

atiStkSwSysUplinkPortId

The ID (port number) of the this port (uplink) of this module.

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.207.8.17.1.4.1.2

atiStkSwSysUplinkSetup

The fixation of the uplink. Fixed types are GBICs, SFPs or XFPs
that are an integral part of the sytem. Disjoint items are applique
or module slots that are determined purely by the attached device.

Enumeration

Enumerated Values:

1	fixed
2	pluggable

.1.3.6.1.4.1.207.8.17.1.4.1.3

atiStkSwSysUplinkType

The module type of the uplink connector of this module.

AtiUplinkType

Type Values:

1	notPresent
2	other
3	applique-at-45-sc-sm
4	applique-at-45-sc
5	applique-at-45-mt
6	applique-at-46
7	applique-at-47
8	sfp
9	gbic
10	xfp

.1.3.6.1.4.1.207.8.17.1.4.1.4

atiStkSwSysUplinkDetails

This field will provide additional details to the Uplink.
For GBIC, SFP or XFP, it may contain information on the
installed devices (e.g. 1000-SX, 1000-T, etc). For applique
types, it may have the name (e.g. A-47) and …

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.207.8.17.1.4.1.5

atiStkSwSysUplinkPortType

The hardware type of a port present in the uplink
connector of this module.

AtiPortType

Type Values:

1	other
2	notPresent
3	mgmt
4	tenBaseT
5	hundredBaseT
6	hundredBaseFX-VF
7	hundredBaseFX-MT
8	hundredBaseFX-SC
9	hundredBaseFX-LC
10	thousandBaseT
11	gigabit
12	gigabitSX
13	gigabitSX-SC
14	gigabitSX-MT
15	gigabitSX-VF
16	gigabitSX-LC
17	gigabitLX
18	gigabitLX-SC
19	gigabitLX-MT
20	gigabitLX-VF
21	gigabitLX-LC
22	sm15
23	ten-gigabit
24	hundredBaseFX
25	hundredFX-LC
26	hundredBaseLX-LX10
27	thousandBaseCX
28	thousandBaseLX
29	thousandBaseSX

.1.3.6.1.4.1.207.8.17.1.4.1.6

atiStkSwSysMgmtACLConfigTable

table

.1.3.6.1.4.1.207.8.17.1.7.2 · 1 row entry · 6 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwSysMgmtACLConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwSysMgmtACLConfigTable'

This table contains a list of MgmtACLs present in the switch
stack and their associated hardware information.

atiStkSwSysMgmtACLConfigEntry row .1.3.6.1.4.1.207.8.17.1.7.2.1

This object specifies an entry in 'atiStkSwSysMgmtACLConfigTable'
that allow the user controls which management stations can remotely
manage the device using the Telnet application protocol or a web
browser.

Indexes

atiStkSwSysMgmtACLConfigModuleId atiStkSwSysMgmtACLConfigId

Column Syntax OID

atiStkSwSysMgmtACLConfigModuleId

The ID of this module.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.207.8.17.1.7.2.1.1

atiStkSwSysMgmtACLConfigId

The ID of the Management ACL Table for this module.

Integer32

Constraints:
range: 1-256

.1.3.6.1.4.1.207.8.17.1.7.2.1.2

atiStkSwSysMgmtACLConfigIpAddr

The IP Address of the specific management station.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.17.1.7.2.1.3

atiStkSwSysMgmtACLConfigMask

The subnet mask of the IP Address.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.17.1.7.2.1.4

atiStkSwSysMgmtACLConfigApplication

This object specify which interface the user want the management
station to be able to use when managing the switch. The options are :
telnet, web, ping, all. Note that the enum value correspond to the
bit position of …

Bitsr/w

Enumerated Values:

0	telnet
1	web
2	ping

.1.3.6.1.4.1.207.8.17.1.7.2.1.5

atiStkSwSysMgmtACLConfigRowStatus

The Row Status of the Mgmt ACL table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.207.8.17.1.7.2.1.6

atiStkSwPortConfigTable

table

.1.3.6.1.4.1.207.8.17.2.1 · 1 row entry · 16 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwPortConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwPortConfigTable'

This table contains a list of physical ports present in the
switch and their associated attributes.

atiStkSwPortConfigEntry row .1.3.6.1.4.1.207.8.17.2.1.1

This object specifies an entry in 'atiStkSwPortConfigTable'
that describes the attributes associated with a physical port
present in the switch.

Indexes

atiStkSwModuleId atiStkSwPortId

Column Syntax OID

atiStkSwModuleId

This object specifies the ID of a module present in the switch
stack.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.207.8.17.2.1.1.1

atiStkSwPortId

This object specifies the ID of a port present on a given
module.

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.207.8.17.2.1.1.2

atiStkSwPortName

The user-defined ASCII name of the port.

OctetStringr/w

Constraints:
range: 0-19

.1.3.6.1.4.1.207.8.17.2.1.1.3

atiStkSwPortState

This object allows the user to either enabled or disabled.
This object can be read to obtain the current state of the port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.2.1.1.4

atiStkSwPortLinkState

This object specifies the link state on this port.

Enumeration

Enumerated Values:

1	online
2	offline

.1.3.6.1.4.1.207.8.17.2.1.1.5

atiStkSwPortNegotiation

This object allows an admin request to configure the port
to either autosense or one of the different speed-duplex
combinations.

Enumerationr/w

Enumerated Values:

1	autosense
2	forceHalfDuplex-10M
3	forceHalfDuplex-100M
4	forceHalfDuplex-1G
5	forceFullDuplex-10M
6	forceFullDuplex-100M
7	forceFullDuplex-1G

.1.3.6.1.4.1.207.8.17.2.1.1.6

atiStkSwPortSpeed

This object specifies the current speed of the port.

Enumeration

Enumerated Values:

1	unknown
2	speed-10M
3	speed-100M
4	speed-1G

.1.3.6.1.4.1.207.8.17.2.1.1.7

atiStkSwPortDuplexStatus

This object specifies the current duplex type used by the
port.

Enumeration

Enumerated Values:

1	unknown
2	halfDuplex
3	fullDuplex

.1.3.6.1.4.1.207.8.17.2.1.1.8

atiStkSwPortFlowControl

This object is used to enable/disable flow control on the
port. When enabled, flow control will be full duplex.

Flow control is disabled by default.

Enumerationr/w

Enumerated Values:

1	unknown
2	disable
3	enable

.1.3.6.1.4.1.207.8.17.2.1.1.9

atiStkSwPortBackPressure

This object is used to enable/disable Back Pressure on the
port.

Back Pressure is disabled by default.

Enumerationr/w

Enumerated Values:

1	unknown
2	disable
3	enable

.1.3.6.1.4.1.207.8.17.2.1.1.10

atiStkSwPortPriority

This object specifies whether packets flowing through this
port use the associated VLAN priority or override the
associated VLAN priority with either a high or a low priority.

This MIB is n…

Enumerationr/w

Enumerated Values:

1	use-vlan-priority
2	override-and-use-low-priority
3	override-and-use-high-priority

.1.3.6.1.4.1.207.8.17.2.1.1.11

atiStkSwPortBroadcastProcessing

This object specifies whether the received broadcast packets
should be processed or discarded.

Broadcast packets are processed by default.

Enumeration

Enumerated Values:

1	discard-broadcasts
2	do-not-discard-broadcasts

.1.3.6.1.4.1.207.8.17.2.1.1.12

atiStkSwPortMDIO

This object is used to set the MDIO of this port for required
cable connection type. For straight-through cable set to mdi
and for cross-over cable set to mdix.

Enumerationr/w

Enumerated Values:

1	mdi
2	mdix
3	auto-mdix

.1.3.6.1.4.1.207.8.17.2.1.1.13

atiStkSwPortHOLLimit

This object allows user to set the head of line blocking limit.

Note (94xx): Range upto 8191 is supported for Gigabit Ports.

Integer32r/w

Constraints:
range: 1-8191

.1.3.6.1.4.1.207.8.17.2.1.1.14

atiStkSwPortBackPressureLimit

This object is used to set the MDIO of this port for required
cable connection type. For straight-through cable set to mdi
and for cross-over cable set to mdix. This limit can be used
for both BackPressure and FlowCont…

Integer32r/w

Constraints:
range: 1-7935

.1.3.6.1.4.1.207.8.17.2.1.1.15

atiStkSwPortSTPState

This object specifies the spanning tree state on this port.

This object is not applicable to 8300 series products. This
object is not valid on the 9400 series of boxes.

Enumeration

Enumerated Values:

1	unknown
2	disabled
3	blocking
4	listening
5	learning
6	forwarding

.1.3.6.1.4.1.207.8.17.2.1.1.16

atiStkPortSecurityConfigTable

table

.1.3.6.1.4.1.207.8.17.2.5 · 1 row entry · 3 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkPortSecurityConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkPortSecurityConfigTable'

This table contains the port security attributes of a list of
physical ports present in the switch.
          
This table object is not applicable to 8300 series products.

atiStkPortSecurityConfigEntry row .1.3.6.1.4.1.207.8.17.2.5.1

This object specifies an entry in
'atiStkPortSecurityConfigTable' that describes the port
security attributes associated with a physical port present in
the switch.

Indexes

atiStkSwModuleId atiStkSwPortId

Column Syntax OID

atiStkPortSecurityThreshold

This object specifies the security threshold on this port. It
is applicable only if the port security mode (specified by
'portSecurityMode') is set to 'limited(2)' mode.

Integer32r/w

Constraints:
range: 1-256

.1.3.6.1.4.1.207.8.17.2.5.1.2

atiStkPortIntrusionAction

This object specifies the security action that should be
taken when an intrusion is detected.

By default, port intrusion action is set to 'discard' mode.

Enumerationr/w

Enumerated Values:

1	discard
2	send-trap
3	disable-port

.1.3.6.1.4.1.207.8.17.2.5.1.3

atiStkPortIntrusionActionStatus

This object enables or disables the security action specified
by the 'portIntrusionAction'.

By default, port intrusion action is disabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.2.5.1.4

atiStkPortDOSAttackConfigTable

table

.1.3.6.1.4.1.207.8.17.2.6.3 · 1 row entry · 4 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkPortDOSAttackConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkPortDOSAttackConfigTable'

This table contains the port DOS (denial of service) attack configuration attributes of a list of
physical ports present in the switch.

This table object is not applicable to 8300 series products.

atiStkPortDOSAttackConfigEntry row .1.3.6.1.4.1.207.8.17.2.6.3.1

This object specifies an entry in
'atiStkPortDOSAttackConfigTable' that describes the port
DOS attack configuration attributes associated with a physical port present in
the switch.

Indexes

atiStkSwModuleId atiStkSwPortId atiStkSwPortDOSAttackType

Column Syntax OID

atiStkSwPortDOSAttackType

This object specifies the type of Port DOS attack configured
on the switch.

Enumerationr/w

Enumerated Values:

1	syn-flood
2	smurf
3	land
4	ip-option
5	teardrop
6	ping-of-death

.1.3.6.1.4.1.207.8.17.2.6.3.1.1

atiStkSwPortDOSAttackActionStatus

This object enables or disables the port DOS action specified
by the 'atiStkSwPortDOSAttackType'.

By default, port DOS attack action is disabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.2.6.3.1.2

atiStkSwPortDOSAttackMirrorPortobsolete

This object specifies the mirror port number to which the packet are to be mirrored for the
DOS attack as specified by atiStkSwPortDOSAttackType.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.2.6.3.1.3

atiStkSwPortDOSAttackMirrorPortStatus

This object enables or disables mirroring of attack packets. If enabled, all potential
attack packets are mirrored to the port specified by atiStkSwPortMirroringDestinationModuleId
and atiStkSwPortMirroringDestination…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.2.6.3.1.4

atiStkSwIntrusionAttackTable

table

.1.3.6.1.4.1.207.8.17.2.7 · 1 row entry · 2 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwIntrusionAttackTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwIntrusionAttackTable'

This object specifies an entry in 'atiStkSwIntrusionAttackTable'
that describes the intruder attack associated with a physical port
present in the switch.

atiStkSwIntrusionAttackEntry row .1.3.6.1.4.1.207.8.17.2.7.1

This object specifies an entry in 'atiStkSwIntrusionAttackTable'
that describes the intruder attack associated with a physical port
present in the switch.

Indexes

atiStkSwModuleId atiStkSwPortId

Column	Syntax	OID
atiStkSwIntruderAttackVlanId This object identifies the intruding VlanId on the port for this module.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.2.7.1.1`
atiStkSwIntruderAttackMacAddr This object identifies the intruding MAC address on the port for this module.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.17.2.7.1.2`

atiStkSwVlanConfigTable

table

.1.3.6.1.4.1.207.8.17.3.1 · 1 row entry · 6 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwVlanConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwVlanConfigTable'

This table contains a list of VLANs configured on the switch.

atiStkSwVlanConfigEntry row .1.3.6.1.4.1.207.8.17.3.1.1

This object specifies an entry in 'atiStkSwVlanConfigTable'
that describes a VLAN configured on the switch.

Indexes

atiStkSwVlanId

Column Syntax OID

atiStkSwVlanId

The VLAN ID of this VLAN as stored in the tag information
header in accordance with the 802.1q specifications.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.207.8.17.3.1.1.1

atiStkSwVlanName

The name of the VLAN.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.17.3.1.1.2

atiStkSwVlanVlanType

This object specifies the type of the Vlan.

Enumeration

Enumerated Values:

0	static
1	port-based
2	mac-based
3	dynamic
4	protected

.1.3.6.1.4.1.207.8.17.3.1.1.3

atiStkSwVlanTaggedPortList

This object specifies a list of tagged ports (on module #1)
that participate in this VLAN.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.3.1.1.4

atiStkSwVlanUntaggedPortList

This object specifies a list of untagged ports (on module #1)
that participate in this VLAN.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.3.1.1.5

atiStkSwVlanConfigEntryStatus

The current status of this VLAN entry.

Enumerationr/w

Enumerated Values:

0	nonexistent
1	active
2	inactive
3	destroy
4	createAndGo
5	createAndWait

.1.3.6.1.4.1.207.8.17.3.1.1.6

atiStkSwPort2VlanTable

table

.1.3.6.1.4.1.207.8.17.3.2 · 1 row entry · 4 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwPort2VlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwPort2VlanTable'

This tables contains a list of ports in the switch and their
associated VLAN configuration information.

atiStkSwPort2VlanEntry row .1.3.6.1.4.1.207.8.17.3.2.1

This object specifies an entry in 'atiStkSwPort2VlanTable'
that describes the VLAN information associated with a given
module/port.

Indexes

atiStkSwPortIndex

Column	Syntax	OID
atiStkSwPortIndex The Index of the VLAN to which this port belongs.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.3.2.1.1`
atiStkSwPortPortId The ID of the VLAN to which this port belongs.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.3.2.1.2`
atiStkSwPortVlanId The ID of the VLAN to which this port belongs.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.3.2.1.3`
atiStkSwPortVlanName The name of the VLAN to which this port belongs.	OctetString Constraints: `range: 0-19`	`.1.3.6.1.4.1.207.8.17.3.2.1.4`

atiStkSwMacAddr2VlanTable

table

.1.3.6.1.4.1.207.8.17.3.3 · 1 row entry · 5 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwMacAddr2VlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwMacAddr2VlanTable'

This table contains a list of MAC addresses (in the
forwarding table of the switch) and the associated VLAN to
which each MAC address belongs.

atiStkSwMacAddr2VlanEntry row .1.3.6.1.4.1.207.8.17.3.3.1

This object specifies an entry in 'atiStkSwMacAddr2VlanTable'
that associates a MAC address (in the forwarding table of the
switch) with the VLAN to which the address belongs.

Indexes

atiStkSwMacEntry

Column	Syntax	OID
atiStkSwMacEntry All entries present in the table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.3.3.1.1`
atiStkSwMacAddress A MAC address from the forwarding table of the switch.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.17.3.3.1.2`
atiStkSwMacAddrVlanId The ID of the VLAN to which this MAC address belongs.	Integer32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.207.8.17.3.3.1.3`
atiStkSwMacAddrVlanName The name of the VLAN to which this MAC address belongs.	OctetString Constraints: `range: 0-19`	`.1.3.6.1.4.1.207.8.17.3.3.1.4`
atiStkSwMacAddrPortList The port List (on the module specified by 'atiStkSwMacAddrModuleId') on which this MAC address entry exists. This is shown as U: Untagged Ports T: Tagged Ports.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.207.8.17.3.3.1.7`

atiStkSwGVRPPortConfigTable

table

.1.3.6.1.4.1.207.8.17.3.7 · 1 row entry · 3 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwGVRPPortConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwGVRPPortConfigTable'

This table is configuring the GVRP Vlan base on each port.

atiStkSwGVRPPortConfigEntry row .1.3.6.1.4.1.207.8.17.3.7.1

This object specifies an entry in 'atiStkSwGVRPPortConfigTable'.

Indexes

atiStkSwGVRPPortConfigModuleId atiStkSwGVRPPortConfigPortId

Column Syntax OID

atiStkSwGVRPPortConfigModuleId

An ID that indicate which module it refer to for stacking.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.207.8.17.3.7.1.1

atiStkSwGVRPPortConfigPortId

Port Index.

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.207.8.17.3.7.1.2

atiStkSwGVRPPortConfigStatus

Port Status for GVRP Vlan either Normal or Mode can be set.

Enumerationr/w

Enumerated Values:

0	normal
1	none

.1.3.6.1.4.1.207.8.17.3.7.1.3

atiStkSwGVRPCountersTable

table

.1.3.6.1.4.1.207.8.17.3.8 · 1 row entry · 26 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwGVRPCountersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwGVRPCountersTable'

This table is configuring the GVRP Vlan base on each port.

atiStkSwGVRPCountersEntry row .1.3.6.1.4.1.207.8.17.3.8.1

This object specifies an entry in 'atiStkSwGVRPCountersTable'.

Indexes

atiStkSwGVRPCountersModuleId

Column	Syntax	OID
atiStkSwGVRPCountersModuleId An ID that indicate which module it refer to for stacking.	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.207.8.17.3.8.1.1`
atiStkSwGVRPCountersGARPRxPkt	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.2`
atiStkSwGVRPCountersInvalidGARPRxPkt	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.3`
atiStkSwGVRPCountersGARPTxPkt	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.4`
atiStkSwGVRPCountersGARPTxDisabled	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.5`
atiStkSwGVRPCountersPortNotSending	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.6`
atiStkSwGVRPCountersGARPDisabled	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.7`
atiStkSwGVRPCountersPortNotListening	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.8`
atiStkSwGVRPCountersInvalidPort	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.9`
atiStkSwGVRPCountersInvalidProtocol	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.10`
atiStkSwGVRPCountersInvalidFormat	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.11`
atiStkSwGVRPCountersDatabaseFull	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.12`
atiStkSwGVRPCountersRxMsgLeaveAll	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.13`
atiStkSwGVRPCountersRxMsgJoinEmpty	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.14`
atiStkSwGVRPCountersRxMsgJoinIn	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.15`
atiStkSwGVRPCountersRxMsgLeaveEmpty	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.16`
atiStkSwGVRPCountersRxMsgLeaveIn	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.17`
atiStkSwGVRPCountersRxMsgEmpty	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.18`
atiStkSwGVRPCountersRxMsgBadMsg	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.19`
atiStkSwGVRPCountersRxMsgBadAttribute	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.20`
atiStkSwGVRPCountersTxMsgLeaveAll	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.21`
atiStkSwGVRPCountersTxMsgJoinEmpty	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.22`
atiStkSwGVRPCountersTxMsgJoinIn	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.23`
atiStkSwGVRPCountersTxMsgLeaveEmpty	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.24`
atiStkSwGVRPCountersTxMsgLeaveIn	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.25`
atiStkSwGVRPCountersTxMsgEmpty	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.17.3.8.1.26`

atiStkSwStaticMacAddrTable

table

.1.3.6.1.4.1.207.8.17.4.1 · 1 row entry · 7 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwStaticMacAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwStaticMacAddrTable'

This table contains a list of static MAC address configured
on the switch.

atiStkSwStaticMacAddrEntry row .1.3.6.1.4.1.207.8.17.4.1.1

This object is an entry in 'atiStkSwStaticMacAddrTable' that
describes a static MAC address configured on a given module
and port.

Indexes

atiStkSwStaticEntry

Column Syntax OID

atiStkSwStaticEntry

The Table Entry number in static MAC address entry table.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.4.1.1.1

atiStkSwStaticMacAddress

This object identifies the static MAC address of this entry.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.17.4.1.1.2

atiStkSwStaticMacAddrVlanId

The ID of the VLAN on which this static MAC address entry is
configured.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.207.8.17.4.1.1.3

atiStkSwStaticMacAddrModuleId

The module ID on which this static MAC address entry is
configured.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.207.8.17.4.1.1.4

atiStkSwStaticMacAddrPortId

The port ID (on the module specified by
'atiStkSwStaticMacAddrModuleId') on which this static MAC
address entry is configured.
Note: a) When defining a list this value must be 0.
b) This is on track to be deprecat…

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.207.8.17.4.1.1.5

atiStkSwStaticMacAddrDstMacState

The current status of this static MAC address entry.

Enumeration

Enumerated Values:

0	discard
1	forward

.1.3.6.1.4.1.207.8.17.4.1.1.6

atiStkSwStaticMacAddrEntryStatus

The current status of this static MAC address entry.

Enumeration

Enumerated Values:

0	static
1	dynamic

.1.3.6.1.4.1.207.8.17.4.1.1.7

atiStkSwEthModuleMonTable

table

.1.3.6.1.4.1.207.8.17.5.1 · 1 row entry · 7 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwEthModuleMonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwEthModuleMonTable'

This table contains a list of modules and their associated
ethernet statistics (measured on the module as a whole).

atiStkSwEthModuleMonEntry row .1.3.6.1.4.1.207.8.17.5.1.1

This object specifies an entry in 'atiStkSwEthModuleMonTable'
that describes the ethernet statistics measured on a given
module as a whole.

Indexes

atiStkSwEthModuleMonId

Column	Syntax	OID
atiStkSwEthModuleMonId Index into atiStkSwEthModuleMonTable.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.5.1.1.1`
atiStkSwEthModuleMonTxGoodFrames The total number of good frames transmitted by this module.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.17.5.1.1.2`
atiStkSwEthModuleMonRxGoodFrames The total number of good frames received by this module.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.17.5.1.1.3`
atiStkSwEthModuleMonTxTotalBytes The total number of bytes transmitted by this module.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.17.5.1.1.4`
atiStkSwEthModuleMonTxBroadcastFrames The total number of broadcast frames transmitted from this module.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.17.5.1.1.5`
atiStkSwEthModuleMonTxMulticastFrames The total number of multicast frames transmitted from this module.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.17.5.1.1.6`
atiStkSwEthModuleMonRxOverrunFrames The total number of oversized frames received on this module.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.17.5.1.1.7`

atiStkSwEthModuleErrTable

table

.1.3.6.1.4.1.207.8.17.5.2 · 1 row entry · 4 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwEthModuleErrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwEthModuleErrTable'

This table contains a list of modules and their associated
ethernet error statistics (measured on the module as a whole).

atiStkSwEthModuleErrEntry row .1.3.6.1.4.1.207.8.17.5.2.1

This object specifies an entry in 'atiStkSwEthModuleErrTable'
that describes the ethernet error statistics measured on a
given module as a whole.

Indexes

atiStkSwEthModuleErrId

Column	Syntax	OID
atiStkSwEthModuleErrId Index into atiStkSwEthModuleErrTable.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.5.2.1.1`
atiStkSwEthModuleErrRxCRC The total number of CRC errors on packets received on this module.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.17.5.2.1.2`
atiStkSwEthModuleErrRxBadFrames The total number of bad frames received on this module.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.17.5.2.1.3`
atiStkSwEthModuleErrCollisions The number of times a collision was detected on this module.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.17.5.2.1.4`

atiStkSwEthPortMonTable

table

.1.3.6.1.4.1.207.8.17.5.3 · 1 row entry · 7 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwEthPortMonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwEthPortMonTable'

This table contains a list of ports and their associated
ethernet statistics.

atiStkSwEthPortMonEntry row .1.3.6.1.4.1.207.8.17.5.3.1

This object specifies an entry in 'atiStkSwEthPortMonTable'
that describes the ethernet statistics measured on a given
module/port.

Indexes

atiStkSwEthPortMonId

Column	Syntax	OID
atiStkSwEthPortMonId Index into atiStkSwEthPortMonTable.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.5.3.1.1`
atiStkSwEthPortMonTxGoodFrames The total number of good frames transmitted by this port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.17.5.3.1.2`
atiStkSwEthPortMonRxGoodFrames The total number of good frames received by this port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.17.5.3.1.3`
atiStkSwEthPortMonTxTotalBytes The total number of bytes transmitted by this port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.17.5.3.1.4`
atiStkSwEthPortMonTxBroadcastFrames The total number of broadcast frames transmitted from this port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.17.5.3.1.5`
atiStkSwEthPortMonTxMulticastFrames The total number of broadcast frames transmitted from this port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.17.5.3.1.6`
atiStkSwEthPortMonRxOverrunFrames The total number of oversized frames received on this port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.17.5.3.1.7`

atiStkSwEthPortErrTable

table

.1.3.6.1.4.1.207.8.17.5.4 · 1 row entry · 3 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwEthPortErrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwEthPortErrTable'

This table contains a list of ports and their associated
ethernet error statistics.

atiStkSwEthPortErrEntry row .1.3.6.1.4.1.207.8.17.5.4.1

This object specifies an entry in atiStkSwEthPortErrTable
that describes the ethernet error statistics measured on a
given module/port.

Indexes

atiStkSwEthPortErrId

Column	Syntax	OID
atiStkSwEthPortErrId Index into atiStkSwEthPortMonTable.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.5.4.1.1`
atiStkSwEthPortErrRxBadFrames The total number of bad frames received on this port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.17.5.4.1.2`
atiStkSwEthPortErrCollisions The number of times a collision was detected on this port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.17.5.4.1.3`

atiStkSwQosStatusTable

table

.1.3.6.1.4.1.207.8.17.7.1 · 1 row entry · 2 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwQosStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwQosStatusTable'

atiStkSwQosStatusTable

atiStkSwQosStatusEntry row .1.3.6.1.4.1.207.8.17.7.1.1

Indexes

atiStkSwQosStatusPortId

Column Syntax OID

atiStkSwQosStatusPortId

Index into atiStkSwQosStatusTable

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.7.1.1.1

atiStkSwQosStatusStatus

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.207.8.17.7.1.1.2

atiStkSwQosInterfaceDetailsTable

table

.1.3.6.1.4.1.207.8.17.7.2 · 1 row entry · 6 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwQosInterfaceDetailsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwQosInterfaceDetailsTable'

atiStkSwQosInterfaceDetailsTable

atiStkSwQosInterfaceDetailsEntry row .1.3.6.1.4.1.207.8.17.7.2.1

atiStkSwQosInterfaceDetailsEntry

Indexes

atiStkSwQosInterfaceDetailsPortId

Column Syntax OID

atiStkSwQosInterfaceDetailsPortId

Index into atiStkSwQosInterfaceDetailsPortId

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.7.2.1.1

atiStkSwQosInterfaceDetailsDefaultQueue

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.7.2.1.2

atiStkSwQosInterfaceDetailsTrust

atiStkSwQosInterfaceDetailsDefaultQueue

Enumerationr/w

Enumerated Values:

0	none
1	cos
2	dscp

.1.3.6.1.4.1.207.8.17.7.2.1.3

atiStkSwQosInterfaceDetailsSetCOS

atiStkSwQosInterfaceDetailsMarkOrRemark

OctetStringr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.17.7.2.1.4

atiStkSwQosInterfaceDetailsSetDSCP

atiStkSwQosInterfaceDetailsMarkOrRemark

OctetStringr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.17.7.2.1.5

atiStkSwQosInterfaceDetailsSchedularAndQueueWeightList

OctetStringr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.17.7.2.1.6

atiStkSwQosCosQueueMapTable

table

.1.3.6.1.4.1.207.8.17.7.3 · 1 row entry · 10 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwQosCosQueueMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwQosCosQueueMapTable'

atiStkSwQosCosQueueMapTable

atiStkSwQosCosQueueMapEntry row .1.3.6.1.4.1.207.8.17.7.3.1

atiStkSwQosCosQueueMapEntry

Indexes

atiStkSwQosCosQueueMapPortId

Column Syntax OID

atiStkSwQosCosQueueMapPortId

Index into atiStkSwQosCosQueueMapTable

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.7.3.1.1

atiStkSwQosCosQueueMapCos0Queue

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.7.3.1.2

atiStkSwQosCosQueueMapCos1Queue

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.7.3.1.3

atiStkSwQosCosQueueMapCos2Queue

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.7.3.1.4

atiStkSwQosCosQueueMapCos3Queue

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.7.3.1.5

atiStkSwQosCosQueueMapCos4Queue

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.7.3.1.6

atiStkSwQosCosQueueMapCos5Queue

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.7.3.1.7

atiStkSwQosCosQueueMapCos6Queue

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.7.3.1.8

atiStkSwQosCosQueueMapCos7Queue

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.7.3.1.9

atiStkSwQosCosQueueMapDefaultMap

atiStkSwQosCosQueueMapDefaultQueue

Enumerationr/w

Enumerated Values:

0	no
1	yes

.1.3.6.1.4.1.207.8.17.7.3.1.10

atiStkSwQosDscpQueueMapTable

table

.1.3.6.1.4.1.207.8.17.7.4 · 1 row entry · 10 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwQosDscpQueueMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwQosDscpQueueMapTable'

atiStkSwQosDscpQueueMapTable

atiStkSwQosDscpQueueMapEntry row .1.3.6.1.4.1.207.8.17.7.4.1

atiStkSwQosDscpQueueMapEntry

Indexes

atiStkSwQosDscpQueueMapPortId

Column Syntax OID

atiStkSwQosDscpQueueMapPortId

Index into atiStkSwQosDscpQueueMapTable

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.7.4.1.1

atiStkSwQosDscpQueueMapQueue0

OctetStringr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.17.7.4.1.2

atiStkSwQosDscpQueueMapQueue1

OctetStringr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.17.7.4.1.3

atiStkSwQosDscpQueueMapQueue2

OctetStringr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.17.7.4.1.4

atiStkSwQosDscpQueueMapQueue3

OctetStringr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.17.7.4.1.5

atiStkSwQosDscpQueueMapQueue4

OctetStringr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.17.7.4.1.6

atiStkSwQosDscpQueueMapQueue5

OctetStringr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.17.7.4.1.7

atiStkSwQosDscpQueueMapQueue6

OctetStringr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.17.7.4.1.8

atiStkSwQosDscpQueueMapQueue7

OctetStringr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.17.7.4.1.9

atiStkSwQosDscpQueueMapDefaultMap

atiStkSwQosDscpQueueMapDefaultQueue

Enumerationr/w

Enumerated Values:

0	no
1	yes

.1.3.6.1.4.1.207.8.17.7.4.1.10

atiStkSwStaticTrunkTable

table

.1.3.6.1.4.1.207.8.17.8.1 · 1 row entry · 5 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwStaticTrunkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwStaticTrunkTable'

This table contains a list of static trunk configuration present 
in the switch stack.

atiStkSwStaticTrunkEntry row .1.3.6.1.4.1.207.8.17.8.1.1

This object specifies an entry in 'atiStkSwStaticTrunkTable'
that describes the static trunk informaton for a module present in
the switch stack.

Indexes

atiStkSwStaticTrunkId

Column Syntax OID

atiStkSwStaticTrunkId

An identifier for a trunk.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.8.1.1.1

atiStkSwStaticTrunkName

Name of a trunk, once the entry has created, it
cannot be changed.

OctetString

Constraints:
range: 1-16

.1.3.6.1.4.1.207.8.17.8.1.1.2

atiStkSwStaticTrunkMethod

Trunk distribution mode.

Enumerationr/w

Enumerated Values:

1	srcMac
2	dstMac
3	src-dstMac
4	srcIp
5	dstIp
6	src-dstIp

.1.3.6.1.4.1.207.8.17.8.1.1.3

atiStkSwStaticTrunkPortList

A list of ports that used as a trunk port.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.8.1.1.4

atiStkSwStaticTrunkStatus

The status of the trunk, either up or down.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.207.8.17.8.1.1.5

atiStkSwACLConfigTable

table

.1.3.6.1.4.1.207.8.17.9.1 · 1 row entry · 20 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwACLConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwACLConfigTable'

This table contains a Access Control List (ACL) in the
switch and their associated attributes.

atiStkSwACLConfigEntry row .1.3.6.1.4.1.207.8.17.9.1.1

This object specifies an entry in 'atiStkSwACLConfigTable'
that describes the ACL in the switch.

Indexes

atiStkSwACLId

Column Syntax OID

atiStkSwACLId

This object specifies the ID of the ACL table.

Integer32

Constraints:
range: 1-700

.1.3.6.1.4.1.207.8.17.9.1.1.1

atiStkSwACLShowId

This object specifies the ID of the ACL table.

Integer32

Constraints:
range: 3000-3699

.1.3.6.1.4.1.207.8.17.9.1.1.2

atiStkSwACLStatus

This object specifies the status of the ACL ID.

Enumerationr/w

Enumerated Values:

1	create
2	delete

.1.3.6.1.4.1.207.8.17.9.1.1.3

atiStkSwACLAction

The action of the ACL entry either deny or permit or copy to mirror.

Enumerationr/w

Enumerated Values:

1	deny
2	permit
3	copytomirror

.1.3.6.1.4.1.207.8.17.9.1.1.4

atiStkSwACLTrafficType

The Object specifies the traffic type of the ACL.

Enumerationr/w

Enumerated Values:

1	icmp
2	ip
3	proto
4	tcp
5	udp

.1.3.6.1.4.1.207.8.17.9.1.1.5

atiStkSwACLSrcType

The Object specifies the source type of the ACL.

Enumerationr/w

Enumerated Values:

1	any
2	host
3	ip

.1.3.6.1.4.1.207.8.17.9.1.1.6

atiStkSwACLSrcAddr

This object displays the IPv4 address of the source of an ACL.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.17.9.1.1.7

atiStkSwACLSrcMask

This object displays the IPv4 mask of the source of an ACL.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.17.9.1.1.8

atiStkSwACLDestType

The Object specifies the destination type of the ACL.

Enumerationr/w

Enumerated Values:

1	any
2	host
3	ip

.1.3.6.1.4.1.207.8.17.9.1.1.9

atiStkSwACLDestAddr

This object displays the IPv4 address of the destination of an ACL.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.17.9.1.1.10

atiStkSwACLDestMask

This object displays the IPv4 mask of the destination of an ACL.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.17.9.1.1.11

atiStkSwACLVlanId

This object specifies the Vlan ID of the ACL table.

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.207.8.17.9.1.1.12

atiStkSwACLProtocol

This object specifies the Protocol ID of the ACL table.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.17.9.1.1.13

atiStkSwACLICMPType

This object specifies the ICMP Type of the ACL table.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.9.1.1.14

atiStkSwACLUDPTCPSrcPort

The Object specifies the comparision of the port.

Enumerationr/w

Enumerated Values:

1	eq
2	lt
3	gt
4	ne
5	range
6	noCompare

.1.3.6.1.4.1.207.8.17.9.1.1.15

atiStkSwACLSrcPort1

This object specifies the port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.17.9.1.1.16

atiStkSwACLSrcPort2

This object specifies the port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.17.9.1.1.17

atiStkSwACLUDPTCPDestPort

The Object specifies the comparision of the port.

Enumerationr/w

Enumerated Values:

1	eq
2	lt
3	gt
4	ne
5	range
6	noCompare

.1.3.6.1.4.1.207.8.17.9.1.1.18

atiStkSwACLDestPort1

This object specifies the port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.17.9.1.1.19

atiStkSwACLDestPort2

This object specifies the port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.17.9.1.1.20

atiStkSwACLMACConfigTable

table

.1.3.6.1.4.1.207.8.17.9.2 · 1 row entry · 10 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwACLMACConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwACLMACConfigTable'

This table contains a Access Control List (ACL) in the
switch and their associated attributes.

atiStkSwACLMACConfigEntry row .1.3.6.1.4.1.207.8.17.9.2.1

This object specifies an entry in 'atiStkSwACLMACConfigTable'
that describes the ACL in the switch.

Indexes

atiStkSwACLMACId

Column Syntax OID

atiStkSwACLMACId

This object specifies the ID of the ACL table.

Integer32

Constraints:
range: 1-700

.1.3.6.1.4.1.207.8.17.9.2.1.1

atiStkSwACLMACShowId

This object specifies the ID of the ACL table.

Integer32

Constraints:
range: 4000-4699

.1.3.6.1.4.1.207.8.17.9.2.1.2

atiStkSwACLMACStatus

This object specifies the status of the ACL ID.

Enumerationr/w

Enumerated Values:

1	create
2	delete

.1.3.6.1.4.1.207.8.17.9.2.1.3

atiStkSwACLMACAction

The action of the ACL entry either deny or permit or copy to mirror.

Enumerationr/w

Enumerated Values:

1	deny
2	permit
3	copytomirror

.1.3.6.1.4.1.207.8.17.9.2.1.4

atiStkSwACLMACSrc

This object specifies the source type.

Enumerationr/w

Enumerated Values:

1	any
2	mac

.1.3.6.1.4.1.207.8.17.9.2.1.5

atiStkSwACLMACDest

This object specifies destination type.

Enumerationr/w

Enumerated Values:

1	any
2	mac

.1.3.6.1.4.1.207.8.17.9.2.1.6

atiStkSwACLMACSrcMac

The MAC address Mask used by this source.

OctetStringr/w

Constraints:
range: 1-18

.1.3.6.1.4.1.207.8.17.9.2.1.7

atiStkSwACLMACSrcMacMask

The MAC address Mask used by this source .

OctetStringr/w

Constraints:
range: 1-18

.1.3.6.1.4.1.207.8.17.9.2.1.8

atiStkSwACLMACDestMac

The MAC address used by this destination.

OctetStringr/w

Constraints:
range: 1-18

.1.3.6.1.4.1.207.8.17.9.2.1.9

atiStkSwACLMACDestMacMask

The MAC address Mask used by this destination.

OctetStringr/w

Constraints:
range: 1-18

.1.3.6.1.4.1.207.8.17.9.2.1.10

atiStkSwACLInterfaceConfigTable

table

.1.3.6.1.4.1.207.8.17.9.3 · 1 row entry · 5 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwACLInterfaceConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwACLInterfaceConfigTable'

This table contains a Access Control List (ACL) in the
switch and their associated attributes.

atiStkSwACLInterfaceConfigEntry row .1.3.6.1.4.1.207.8.17.9.3.1

This object specifies an entry in 'atiStkSwACLMACConfigTable'
that describes the ACL in the switch.

Indexes

atiStkSwACLInterfaceModuleId atiStkSwACLInterfacePortId

Column	Syntax	OID
atiStkSwACLInterfaceModuleId This object specifies the Module ID of the system.	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.207.8.17.9.3.1.1`
atiStkSwACLInterfacePortId This object specifies the Port ID of the system.	Integer32 Constraints: `range: 1-28`	`.1.3.6.1.4.1.207.8.17.9.3.1.2`
atiStkSwACLInterfacaeACLId This object specifies the created ACL ID.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.9.3.1.3`
atiStkSwACLInterfacaeAddACLId This object specifies the ACL ID to Add.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.9.3.1.4`
atiStkSwACLInterfacaeRemoveACLId This object specifies the ACL ID to Remove.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.9.3.1.5`

atiStkSwLldpConfigPortTable

table

.1.3.6.1.4.1.207.8.17.10.1.9 · 1 row entry · 13 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwLldpConfigPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwLldpConfigPortTable'

The table that controls LLDP frame transmission on individual
ports.

atiStkSwLldpConfigPortEntry row .1.3.6.1.4.1.207.8.17.10.1.9.1

LLDP configuration information for a particular port.
This configuration parameter controls the transmission and
the reception of LLDP frames on those ports whose rows are
created in this table.

Indexes

atiStkSwLldpConfigPortId

Column Syntax OID

atiStkSwLldpConfigModuleId

This object specifies the ID of a module present in the switch
stack.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.1.9.1.1

atiStkSwLldpConfigPortId

The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.

The value of this object is used as a port index to the
atiStkSwLldpCon…

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.1.9.1.2

atiStkSwLldpConfigDirection

This object specifies the operation mode of the LLDP
for the indicated port - whether to transmit and/or receive
LLDP package, or do nothing.

Enumerationr/w

Enumerated Values:

1	transmit
2	receive
3	both
4	none

.1.3.6.1.4.1.207.8.17.10.1.9.1.3

atiStkSwLldpConfigNotif

The atiStkSwLldpConfigNotif controls, on a per
port basis, whether or not notifications from the agent
are enabled. The value enabled(1) means that notifications are
enabled; the value disabled(2) means that they are no…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.10.1.9.1.4

atiStkSwLldpConfigMgmtAddr

This object displays the IPv4 address to be advertised to neighbors
(via the Management Address TLV) via specified ports.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.17.10.1.9.1.5

atiStkSwLldpConfigTlvSelect

This enables specified optional TLVs for transmission in LLDP
advertisement via the specified ports.

Bitsr/w

Enumerated Values:

19	maxFrameSize
20	linkAggregation
21	powerMgmt
22	macPhyConfig
23	protocolIds
24	vlanNames
25	portAndProtocolVlans
26	portVlan
27	mgmtAddr
28	sysCap
29	sysDesc
30	sysName
31	portDesc

.1.3.6.1.4.1.207.8.17.10.1.9.1.6

atiStkSwLldpConfigTlvDeselect

This disables specified optional TLVs for transmission in LLDP
advertisement via the specified ports.

Bitsr/w

Enumerated Values:

19	maxFrameSize
20	linkAggregation
21	powerMgmt
22	macPhyConfig
23	protocolIds
24	vlanNames
25	portAndProtocolVlans
26	portVlan
27	mgmtAddr
28	sysCap
29	sysDesc
30	sysName
31	portDesc

.1.3.6.1.4.1.207.8.17.10.1.9.1.7

atiStkSwLldpConfigMedNotif

The atiStkSwLldpConfigMedNotif controls, on a per
port basis, whether or not MED notifications from the agent
are enabled. The value enabled(1) means that notifications are
enabled; the value disabled(2) means that they…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.10.1.9.1.8

atiStkSwLldpConfigMedTlvSelect

This enables specified MED TLVs for transmission in LLDP
advertisement via the specified ports.

Bitsr/w

Enumerated Values:

27	inventoryMgmt
28	powerMgmtExt
29	location
30	networkPolicy
31	capabilities

.1.3.6.1.4.1.207.8.17.10.1.9.1.9

atiStkSwLldpConfigMedTlvDeselect

This disables specified MED TLVs for transmission in LLDP
advertisement via the specified ports.

Bitsr/w

Enumerated Values:

27	inventoryMgmt
28	powerMgmtExt
29	location
30	networkPolicy
31	capabilities

.1.3.6.1.4.1.207.8.17.10.1.9.1.10

atiStkSwLldpConfigLocCoord

This assigns an LLDP Coordinate location information to
the specified ports. Set 0 to reset.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.1.9.1.11

atiStkSwLldpConfigLocCivic

This assigns an LLDP Civic location information to
the specified ports. Set 0 to reset.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.1.9.1.12

atiStkSwLldpConfigLocElin

This assigns an LLDP Elin location information to
the specified ports. Set 0 to reset.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.1.9.1.13

atiStkSwLldpStatsPortTable

table

.1.3.6.1.4.1.207.8.17.10.2.12 · 1 row entry · 13 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwLldpStatsPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwLldpStatsPortTable'

A table containing LLDP transmission and reception statistics for
individual ports.

atiStkSwLldpStatsPortEntry row .1.3.6.1.4.1.207.8.17.10.2.12.1

LLDP frame transmission and reception statistics for a particular port.

Indexes

atiStkSwLldpStatsPortId

Column Syntax OID

atiStkSwLldpStatsModuleId

This object specifies the ID of a module present in the switch
stack.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.2.12.1.1

atiStkSwLldpStatsPortId

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.2.12.1.2

atiStkSwLldpStatsFramesOut

The number of LLDP frames transmitted by this LLDP agent
on the indicated port.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.17.10.2.12.1.3

atiStkSwLldpStatsFramesIn

The number of valid LLDP frames received by this LLDP agent
on the indicated port, while this LLDP agent is enabled.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.17.10.2.12.1.4

atiStkSwLldpStatsFramesInError

The number of invalid LLDP frames received by this LLDP
agent on the indicated port, while this LLDP agent is enabled.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.17.10.2.12.1.5

atiStkSwLldpStatsFramesInDropped

The number of LLDP frames received by this LLDP agent on
the indicated port, and then discarded for any reason.
This counter can provide an indication that LLDP header
formating problems may exist with the local LLDP ag…

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.17.10.2.12.1.6

atiStkSwLldpStatsTLVsUnrecognized

The number of LLDP TLVs received on the given port that
are not recognized by this LLDP agent on the indicated port.

An unrecognized TLV is referred to as the TLV whose type value
is in the range of reser…

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.17.10.2.12.1.7

atiStkSwLldpStatsTLVsDiscarded

The number of LLDP TLVs discarded for any reason by this LLDP
agent on the indicated port.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.17.10.2.12.1.8

atiStkSwLldpStatsNewNeighbors

The number of times the complete set of information
advertised by a particular MSAP has been inserted into tables
contained in the Neighbor/Remote table associated with the
indicated port.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.17.10.2.12.1.9

atiStkSwLldpStatsNeighborsDeleted

The number of times the complete set of information
advertised by a particular MSAP has been deleted from
the Neighbor/Remote table associated with the indicated port.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.17.10.2.12.1.10

atiStkSwLldpStatsNeighborsDropped

The number of times the complete set of information
advertised by a particular MSAP could not be entered into
the Neighbor/Remote table associated with the indicated
port because of insufficient resources.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.17.10.2.12.1.11

atiStkSwLldpStatsNeighborsAgedOut

The counter that represents the number of age-outs that
occurred on a given port. An age-out is the number of
times the complete set of information advertised by a
particular MSAP has been deleted from tables contained…

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.17.10.2.12.1.12

atiStkSwLldpStatsReset

This clears all the LLDP statistics (packet and event counters)
associated with the indicated port.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.207.8.17.10.2.12.1.13

atiStkSwLldpLocalInfoTable

table

.1.3.6.1.4.1.207.8.17.10.3.1 · 1 row entry · 15 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwLldpLocalInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwLldpLocalInfoTable'

This table contains one or more rows per port information
associated with the local system known to this agent.

atiStkSwLldpLocalInfoEntry row .1.3.6.1.4.1.207.8.17.10.3.1.1

Information about a particular port component.

Indexes

atiStkSwLldpLocPortNum

Column Syntax OID

atiStkSwLldpLocModuleId

This object specifies the ID of a module present in the switch
stack.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.3.1.1.1

atiStkSwLldpLocPortNum

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.3.1.1.2

atiStkSwLldpLocChassisIdSubtype

The type of encoding used to identify the chassis
associated with the local system.

Enumeration

Enumerated Values:

1	chassisComponent
2	interfaceAlias
3	portComponent
4	macAddress
5	networkAddress
6	interfaceName
7	local

.1.3.6.1.4.1.207.8.17.10.3.1.1.3

atiStkSwLldpLocChassisId

The string value used to identify the chassis component
associated with the local system.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.3.1.1.4

atiStkSwLldpLocPortIdSubtype

The type of port identifier encoding used in the associated
atiStkSwLldpLocPortId object.

Enumeration

Enumerated Values:

1	interfaceAlias
2	portComponent
3	macAddress
4	networkAddress
5	interfaceName
6	agentCircuitId
7	local

.1.3.6.1.4.1.207.8.17.10.3.1.1.5

atiStkSwLldpLocPortId

The string value used to identify the port component
associated with a given port in the local system.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.3.1.1.6

atiStkSwLldpLocTtl

Time-to-live advertised by the given port

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.3.1.1.7

atiStkSwLldpLocPortDesc

The string value used to identify the 802 LAN station's port
description associated with the local system.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.3.1.1.8

atiStkSwLldpLocSysName

The string value used to identify the system name of the
local system.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.3.1.1.9

atiStkSwLldpLocSysDesc

The string value used to identify the system description
of the local system.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.3.1.1.10

atiStkSwLldpLocManAddrSubtype

The type of management address identifier encoding used in
the associated atiStkSwLldpLocManagmentAddr object.

Enumeration

Enumerated Values:

0	other
1	ipV4
2	ipV6
3	nsap
4	hdlc
5	bbn1822
6	all802
7	e163
8	e164
9	f69
10	x121
11	ipx
12	appleTalk
13	decnetIV
14	banyanVines
15	e164withNsap
16	dns
17	distinguishedName
18	asNumber
19	xtpOverIpv4
20	xtpOverIpv6
21	xtpNativeModeXTP
22	fibreChannelWWPN
23	fibreChannelWWNN
24	gwid
25	afi
65535	reserved

.1.3.6.1.4.1.207.8.17.10.3.1.1.13

atiStkSwLldpLocManAddr

The string value used to identify the management address
component associated with the local system. The purpose of
this address is to contact the management entity.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.17.10.3.1.1.14

atiStkSwLldpLocManAddrIfSubtype

The enumeration value that identifies the interface numbering
method used for defining the interface number, associated
with the local system.

Enumeration

Enumerated Values:

1	unknown
2	ifIndex
3	systemPortNumber

.1.3.6.1.4.1.207.8.17.10.3.1.1.15

atiStkSwLldpLocManAddrIfId

The integer value used to identify the interface number
regarding the management address component associated with
the local system.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.3.1.1.16

atiStkSwLldpLocManAddrOID

The OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the local system agent.

ObjectIdentifier

.1.3.6.1.4.1.207.8.17.10.3.1.1.17

atiStkSwLldpDot1LocTable

table

.1.3.6.1.4.1.207.8.17.10.3.2 · 1 row entry · 9 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwLldpDot1LocTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwLldpDot1LocTable'

This table contains one row per port for IEEE 802.1
organizationally defined LLDP extension on the local system
known to this agent.

atiStkSwLldpDot1LocEntry row .1.3.6.1.4.1.207.8.17.10.3.2.1

Information about IEEE 802.1 organizationally defined
LLDP extension.

Indexes

atiStkSwLldpDot1LocPortNum

Column Syntax OID

atiStkSwLldpDot1LocModuleId

This object specifies the ID of a module present in the switch
stack.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.3.2.1.1

atiStkSwLldpDot1LocPortNum

The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.3.2.1.2

atiStkSwLldpDot1LocPortVlanId

The integer value used to identify the port's VLAN identifier
associated with the local system. A value of zero shall
be used if the system either does not know the PVID or does
not support port-based VLAN operation.

Integer32

Constraints:
range: 0-4094

.1.3.6.1.4.1.207.8.17.10.3.2.1.3

atiStkSwLldpDot1LocProtoVlanId

The integer value used to identify the port and protocol
VLANs associated with the given port associated with the
local system. A value of zero shall be used if the system
either does not know the protocol VLAN ID (PPV…

Integer32

Constraints:
range: 0-4094

.1.3.6.1.4.1.207.8.17.10.3.2.1.4

atiStkSwLldpDot1LocProtoVlanSupported

The truth value used to indicate whether the given port
(associated with the local system) supports port and protocol
VLANs.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.10.3.2.1.5

atiStkSwLldpDot1LocProtoVlanEnabled

The truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated with
the local system.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.10.3.2.1.6

atiStkSwLldpDot1LocVlanId

The integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port is compatible.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.3.2.1.7

atiStkSwLldpDot1LocVlanName

The string value used to identify VLAN name identified by the
Vlan Id associated with the given port on the local system.

This object should contain the value of the dot1QVLANStaticName
object (defined in…

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.3.2.1.8

atiStkSwLldpDot1LocProtocolId

The octet string value used to identify the protocols
associated with the given port of the local system.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.3.2.1.9

atiStkSwLldpDot3LocTable

table

.1.3.6.1.4.1.207.8.17.10.3.3.1 · 1 row entry · 15 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwLldpDot3LocTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwLldpDot3LocTable'

This table contains one row per port of Ethernet port
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent.

atiStkSwLldpDot3LocEntry row .1.3.6.1.4.1.207.8.17.10.3.3.1.1

Information about a particular port component.

Indexes

atiStkSwLldpDot3LocPortNum

Column Syntax OID

atiStkSwLldpDot3LocModuleId

This object specifies the ID of a module present in the switch
stack.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.3.3.1.1.1

atiStkSwLldpDot3LocPortNum

The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.3.3.1.1.2

atiStkSwLldpDot3LocPortAutoNegSupported

The truth value used to indicate whether the given port
(associated with the local system) supports Auto-negotiation.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.10.3.3.1.1.3

atiStkSwLldpDot3LocPortAutoNegEnabled

The truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the local system.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.10.3.3.1.1.4

atiStkSwLldpDot3LocPortAutoNegAdvertisedCap

This object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
local system.

Bits

Enumerated Values:

0	bOther
1	b10baseT
2	b10baseTFD
3	b100baseT4
4	b100baseTX
5	b100baseTXFD
6	b100baseT2
7	b100baseT2FD
8	bFdxPause
9	bFdxAPause
10	bFdxSPause
11	bFdxBPause
12	b1000baseX
13	b1000baseXFD
14	b1000baseT
15	b1000baseTFD

.1.3.6.1.4.1.207.8.17.10.3.3.1.1.5

atiStkSwLldpDot3LocPortOperMauType

An integer value that indicates the operational MAU type
of the given port on the local system.

This object contains the integer value derived from the
list position of the corresponding dot3MauType as li…

Enumeration

Enumerated Values:

1	dot3MauTypeAUI
2	dot3MauType10Base5
3	dot3MauTypeFoirl
4	dot3MauType10Base2
5	dot3MauType10BaseT
6	dot3MauType10BaseFP
7	dot3MauType10BaseFB
8	dot3MauType10BaseFL
9	dot3MauType10Broad36
10	dot3MauType10BaseTHD
11	dot3MauType10BaseTFD
12	dot3MauType10BaseFLHD
13	dot3MauType10BaseFLFD
14	dot3MauType100BaseT4
15	dot3MauType100BaseTXHD
16	dot3MauType100BaseTXFD
17	dot3MauType100BaseFXHD
18	dot3MauType100BaseFXFD
19	dot3MauType100BaseT2HD
20	dot3MauType100BaseT2FD
21	dot3MauType1000BaseXHD
22	dot3MauType1000BaseXFD
23	dot3MauType1000BaseLXHD
24	dot3MauType1000BaseLXFD
25	dot3MauType1000BaseSXHD
26	dot3MauType1000BaseSXFD
27	dot3MauType1000BaseCXHD
28	dot3MauType1000BaseCXFD
29	dot3MauType1000BaseTHD
30	dot3MauType1000BaseTFD
31	dot3MauType10GigBaseX
32	dot3MauType10GigBaseLX4
33	dot3MauType10GigBaseR
34	dot3MauType10GigBaseER
35	dot3MauType10GigBaseLR
36	dot3MauType10GigBaseSR
37	dot3MauType10GigBaseW
38	dot3MauType10GigBaseEW
39	dot3MauType10GigBaseLW
40	dot3MauType10GigBaseSW

.1.3.6.1.4.1.207.8.17.10.3.3.1.1.6

atiStkSwLldpDot3LocPowerPortClass

The value that identifies the port Class of the given port
associated with the local system.

Enumeration

Enumerated Values:

1	pClassPSE
2	pClassPD

.1.3.6.1.4.1.207.8.17.10.3.3.1.1.7

atiStkSwLldpDot3LocPowerMDISupported

The truth value used to indicate whether the MDI power is
supported on the given port associated with the local system.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.10.3.3.1.1.8

atiStkSwLldpDot3LocPowerMDIEnabled

The truth value used to identify whether MDI power is
enabled on the given port associated with the local system.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.10.3.3.1.1.9

atiStkSwLldpDot3LocPowerPairControlable

The truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in IETF
RFC 3621) and is used to indicate whether the pair selection
can be controlled on the given port associated with t…

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.10.3.3.1.1.10

atiStkSwLldpDot3LocPowerPairs

This object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the local system.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.17.10.3.3.1.1.11

atiStkSwLldpDot3LocPowerClass

This object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
local system.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.207.8.17.10.3.3.1.1.12

atiStkSwLldpDot3LocLinkAggStatus

The bitmap value contains the link aggregation capabilities
and the current aggregation status of the link.

Bits

Enumerated Values:

7	aggCapable
8	aggEnabled

.1.3.6.1.4.1.207.8.17.10.3.3.1.1.13

atiStkSwLldpDot3LocLinkAggPortId

This object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component in link aggregation.

If the port i…

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.207.8.17.10.3.3.1.1.14

atiStkSwLldpDot3LocMaxFrameSize

An integer value indicating the maximum supported frame
size in octets on the given port of the local system.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.17.10.3.3.1.1.15

atiStkSwLldpMedLocTable

table

.1.3.6.1.4.1.207.8.17.10.3.4.1 · 1 row entry · 20 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwLldpMedLocTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwLldpMedLocTable'

This table contains one row per port of LLDP-MED
information on the local system known to this agent.

atiStkSwLldpMedLocEntry row .1.3.6.1.4.1.207.8.17.10.3.4.1.1

Information about a particular port component.

Indexes

atiStkSwLldpMedLocPortNum

Column Syntax OID

atiStkSwLldpMedLocModuleId

This object specifies the ID of a module present in the switch
stack.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.1

atiStkSwLldpMedLocPortNum

The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.2

atiStkSwLldpMedLocDeviceClass

Local Device Class.

AtiStkSwLldpMedDeviceClass

Type Values:

0	notDefined
1	endpointClass1
2	endpointClass2
3	endpointClass3
4	networkConnectivity

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.3

atiStkSwLldpMedLocCapabilities

The bitmap includes the MED organizationally defined set of LLDP
TLVs whose transmission is possible for the respective port
on the LLDP agent of the device. Each bit in the bitmap corresponds
to an LLDP-MED subtype ass…

AtiStkSwLldpMedCapabilities

Type Values:

0	capabilities
1	networkPolicy
2	location
3	extendedPSE
4	extendedPD
5	inventory

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.4

atiStkSwLldpMedLocMediaPolicyAppType

The media type that defines the primary function of the
application for the policy advertised by an endpoint.

PolicyAppType

Type Values:

0	unknown
1	voice
2	voiceSignaling
3	guestVoice
4	guestVoiceSignaling
5	softPhoneVoice
6	videoconferencing
7	streamingVideo
8	videoSignaling

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.5

atiStkSwLldpMedLocMediaPolicyVlanID

An extension of the VLAN Identifier for the port,
as defined in IEEE 802.1P-1998.

A value of 1 through 4094 is used to define a valid PVID.

A value of 0 shall be used if the device is usin…

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.6

atiStkSwLldpMedLocMediaPolicyPriority

This object contains the value of the 802.1p priority
which is associated with the given port on the
local system.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.7

atiStkSwLldpMedLocMediaPolicyDscp

This object contains the value of the Differentiated Service
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
which is associated with the given port on the local system.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.8

atiStkSwLldpMedLocMediaPolicyUnknown

A value of 'true' indicates that the
network policy for the specified application type is
currently unknown. In this case, the VLAN ID, the
layer 2 priority and the DSCP value fields are ignored.
A value of 'false' …

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.9

atiStkSwLldpMedLocMediaPolicyTagged

A value of 'true' indicates that the application is using a
tagged VLAN.
A value of 'false' indicates that for the specific application
the device either is using an untagged VLAN or does not
support port based VLAN o…

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.10

atiStkSwLldpMedLocHardwareRev

The vendor-specific hardware revision string
as advertised by the endpoint.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.11

atiStkSwLldpMedLocFirmwareRev

The vendor-specific firmware revision string
as advertised by the endpoint.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.12

atiStkSwLldpMedLocSoftwareRev

The vendor-specific software revision string
as advertised by the endpoint.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.13

atiStkSwLldpMedLocSerialNum

The vendor-specific serial number
as advertised by the endpoint.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.14

atiStkSwLldpMedLocMfgName

The vendor-specific manufacturer name
as advertised by the endpoint.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.15

atiStkSwLldpMedLocModelName

The vendor-specific model name
as advertised by the endpoint.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.16

atiStkSwLldpMedLocAssetID

The vendor-specific asset tracking identifier
as advertised by the endpoint.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.17

atiStkSwLldpMedLocCoordLocation

Coordinate based location information

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.18

atiStkSwLldpMedLocCivicLocation

Civic location information

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.19

atiStkSwLldpMedLocElinLocation

Elin location information

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.3.4.1.1.20

atiStkSwLldpRemBaseTable

table

.1.3.6.1.4.1.207.8.17.10.4.1 · 1 row entry · 18 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwLldpRemBaseTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwLldpRemBaseTable'

This table contains one or more rows per physical network
connection known to this agent.

atiStkSwLldpRemBaseEntry row .1.3.6.1.4.1.207.8.17.10.4.1.1

Information about a particular physical network connection.

Indexes

atiStkSwLldpRemIndex

Column Syntax OID

atiStkSwLldpRemModuleNum

This object specifies the ID of a module present in the switch
stack.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.4.1.1.1

atiStkSwLldpRemPortNum

The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The atiStkSwLldpRemPortNum
identifies the port on which the remote system information…

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.4.1.1.2

atiStkSwLldpRemIndex

This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.4.1.1.3

atiStkSwLldpRemChassisIdSubtype

The type of encoding used to identify the chassis associated
with the remote system.

Enumeration

Enumerated Values:

1	chassisComponent
2	interfaceAlias
3	portComponent
4	macAddress
5	networkAddress
6	interfaceName
7	local

.1.3.6.1.4.1.207.8.17.10.4.1.1.4

atiStkSwLldpRemChassisId

The string value used to identify the chassis component
associated with the remote system.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.4.1.1.5

atiStkSwLldpRemPortIdSubtype

The type of port identifier encoding used in the associated
atiStkSwLldpRemPortId object.

Enumeration

Enumerated Values:

1	interfaceAlias
2	portComponent
3	macAddress
4	networkAddress
5	interfaceName
6	agentCircuitId
7	local

.1.3.6.1.4.1.207.8.17.10.4.1.1.6

atiStkSwLldpRemPortId

The string value used to identify the port component
associated with the remote system.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.4.1.1.7

atiStkSwLldpRemTtl

Time-to-live advertised by the remote system.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.4.1.1.8

atiStkSwLldpRemPortDesc

The string value used to identify the description of
the given port associated with the remote system.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.4.1.1.9

atiStkSwLldpRemSysName

The string value used to identify the system name of the
remote system.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.4.1.1.10

atiStkSwLldpRemSysDesc

The string value used to identify the system description
of the remote system.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.4.1.1.11

atiStkSwLldpRemSysCapSupported

The bitmap value used to identify which system capabilities
are supported on the remote system.

Bits

Enumerated Values:

8	stationOnly
9	docsisCableDevice
10	telephone
11	router
12	wlanAccessPoint
13	bridge
14	repeater
15	other

.1.3.6.1.4.1.207.8.17.10.4.1.1.12

atiStkSwLldpRemSysCapEnabled

The bitmap value used to identify which system capabilities
are enabled on the remote system.

Bits

Enumerated Values:

8	stationOnly
9	docsisCableDevice
10	telephone
11	router
12	wlanAccessPoint
13	bridge
14	repeater
15	other

.1.3.6.1.4.1.207.8.17.10.4.1.1.13

atiStkSwLldpRemManAddrSubtype

The type of management address identifier encoding used in
the associated atiStkSwLldpRemManAddr object.

Enumeration

Enumerated Values:

0	other
1	ipV4
2	ipV6
3	nsap
4	hdlc
5	bbn1822
6	all802
7	e163
8	e164
9	f69
10	x121
11	ipx
12	appleTalk
13	decnetIV
14	banyanVines
15	e164withNsap
16	dns
17	distinguishedName
18	asNumber
19	xtpOverIpv4
20	xtpOverIpv6
21	xtpNativeModeXTP
22	fibreChannelWWPN
23	fibreChannelWWNN
24	gwid
25	afi
65535	reserved

.1.3.6.1.4.1.207.8.17.10.4.1.1.14

atiStkSwLldpRemManAddr

The string value used to identify the management address
component associated with the remote system. The purpose
of this address is to contact the management entity.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.17.10.4.1.1.15

atiStkSwLldpRemManAddrIfSubtype

The enumeration value that identifies the interface numbering
method used for defining the interface number, associated
with the remote system.

Enumeration

Enumerated Values:

1	unknown
2	ifIndex
3	systemPortNumber

.1.3.6.1.4.1.207.8.17.10.4.1.1.16

atiStkSwLldpRemManAddrIfId

The integer value used to identify the interface number
regarding the management address component associated with
the remote system.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.4.1.1.17

atiStkSwLldpRemManAddrOID

The OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the remote system agent.

ObjectIdentifier

.1.3.6.1.4.1.207.8.17.10.4.1.1.18

atiStkSwLldpDot1RemTable

table

.1.3.6.1.4.1.207.8.17.10.4.2 · 1 row entry · 10 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwLldpDot1RemTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwLldpDot1RemTable'

This table contains one or more rows per physical network
connection known to this agent.

atiStkSwLldpDot1RemEntry row .1.3.6.1.4.1.207.8.17.10.4.2.1

Information about a particular port component.

Indexes

atiStkSwLldpDot1RemIndex

Column Syntax OID

atiStkSwLldpDot1RemModuleId

This object specifies the ID of a module present in the switch
stack.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.4.2.1.1

atiStkSwLldpDot1RemPortNum

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.4.2.1.2

atiStkSwLldpDot1RemIndex

This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.4.2.1.3

atiStkSwLldpDot1RemPortVlanId

The integer value used to identify the port's VLAN identifier
associated with the remote system. if the remote system
either does not know the PVID or does not support port-based
VLAN operation, the value of atiStkSwLl…

Integer32

Constraints:
range: 0-4094

.1.3.6.1.4.1.207.8.17.10.4.2.1.4

atiStkSwLldpDot1RemProtoVlanId

The integer value used to identify the port and protocol
VLANs associated with the given port associated with the
remote system.

If port and protocol VLANs are not supported on the given
port associated w…

Integer32

Constraints:
range: 0-4094

.1.3.6.1.4.1.207.8.17.10.4.2.1.5

atiStkSwLldpDot1RemProtoVlanSupported

The truth value used to indicate whether the given port
(associated with the remote system) is capable of supporting
port and protocol VLANs.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.10.4.2.1.6

atiStkSwLldpDot1RemProtoVlanEnabled

The truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated with
the remote system.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.10.4.2.1.7

atiStkSwLldpDot1RemVlanId

The integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port of the remote system
is compatible.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.4.2.1.8

atiStkSwLldpDot1RemVlanName

The string value used to identify VLAN name identified by the
VLAN Id associated with the remote system.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.4.2.1.9

atiStkSwLldpDot1RemProtocolId

The octet string value used to identify the protocols
associated with the given port of remote system.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.4.2.1.10

atiStkSwLldpDot3RemTable

table

.1.3.6.1.4.1.207.8.17.10.4.3.1 · 1 row entry · 16 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwLldpDot3RemTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwLldpDot3RemTable'

This table contains Ethernet port information (as a part
of the LLDP 802.3 organizational extension) of the remote
system.

atiStkSwLldpDot3RemEntry row .1.3.6.1.4.1.207.8.17.10.4.3.1.1

Information about a particular physical network connection.

Indexes

atiStkSwLldpRemIndex

Column Syntax OID

atiStkSwLldpDot3RemModuleNum

This object specifies the ID of a module present in the switch
stack.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.4.3.1.1.1

atiStkSwLldpDot3RemPortNum

The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The atiStkSwLldpDot3RemPortNum
identifies the port on which the remote system informa…

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.4.3.1.1.2

atiStkSwLldpDot3RemIndex

This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.4.3.1.1.3

atiStkSwLldpDot3RemPortAutoNegSupported

The truth value used to indicate whether the given port
(associated with remote system) supports Auto-negotiation.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.10.4.3.1.1.4

atiStkSwLldpDot3RemPortAutoNegEnabled

The truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the remote system.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.10.4.3.1.1.5

atiStkSwLldpDot3RemPortAutoNegAdvertisedCap

This object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
remote system.

Bits

Enumerated Values:

0	bOther
1	b10baseT
2	b10baseTFD
3	b100baseT4
4	b100baseTX
5	b100baseTXFD
6	b100baseT2
7	b100baseT2FD
8	bFdxPause
9	bFdxAPause
10	bFdxSPause
11	bFdxBPause
12	b1000baseX
13	b1000baseXFD
14	b1000baseT
15	b1000baseTFD

.1.3.6.1.4.1.207.8.17.10.4.3.1.1.6

atiStkSwLldpDot3RemPortOperMauType

An integer value that indicates the operational MAU type
of the sending device.

This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed in
in IETF …

Enumeration

Enumerated Values:

1	dot3MauTypeAUI
2	dot3MauType10Base5
3	dot3MauTypeFoirl
4	dot3MauType10Base2
5	dot3MauType10BaseT
6	dot3MauType10BaseFP
7	dot3MauType10BaseFB
8	dot3MauType10BaseFL
9	dot3MauType10Broad36
10	dot3MauType10BaseTHD
11	dot3MauType10BaseTFD
12	dot3MauType10BaseFLHD
13	dot3MauType10BaseFLFD
14	dot3MauType100BaseT4
15	dot3MauType100BaseTXHD
16	dot3MauType100BaseTXFD
17	dot3MauType100BaseFXHD
18	dot3MauType100BaseFXFD
19	dot3MauType100BaseT2HD
20	dot3MauType100BaseT2FD
21	dot3MauType1000BaseXHD
22	dot3MauType1000BaseXFD
23	dot3MauType1000BaseLXHD
24	dot3MauType1000BaseLXFD
25	dot3MauType1000BaseSXHD
26	dot3MauType1000BaseSXFD
27	dot3MauType1000BaseCXHD
28	dot3MauType1000BaseCXFD
29	dot3MauType1000BaseTHD
30	dot3MauType1000BaseTFD
31	dot3MauType10GigBaseX
32	dot3MauType10GigBaseLX4
33	dot3MauType10GigBaseR
34	dot3MauType10GigBaseER
35	dot3MauType10GigBaseLR
36	dot3MauType10GigBaseSR
37	dot3MauType10GigBaseW
38	dot3MauType10GigBaseEW
39	dot3MauType10GigBaseLW
40	dot3MauType10GigBaseSW

.1.3.6.1.4.1.207.8.17.10.4.3.1.1.7

atiStkSwLldpDot3RemPowerPortClass

The value that identifies the port Class of the given port
associated with the remote system.

Enumeration

Enumerated Values:

1	pClassPSE
2	pClassPD

.1.3.6.1.4.1.207.8.17.10.4.3.1.1.8

atiStkSwLldpDot3RemPowerMDISupported

The truth value used to indicate whether the MDI power
is supported on the given port associated with the remote
system.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.10.4.3.1.1.9

atiStkSwLldpDot3RemPowerMDIEnabled

The truth value used to identify whether MDI power is
enabled on the given port associated with the remote system.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.10.4.3.1.1.10

atiStkSwLldpDot3RemPowerPairControlable

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.17.10.4.3.1.1.11

atiStkSwLldpDot3RemPowerPairs

This object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the remote system.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.17.10.4.3.1.1.12

atiStkSwLldpDot3RemPowerClass

This object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
remote system.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.207.8.17.10.4.3.1.1.13

atiStkSwLldpDot3RemLinkAggStatus

The bitmap value contains the link aggregation capabilities
and the current aggregation status of the link.

Bits

Enumerated Values:

7	aggCapable
8	aggEnabled

.1.3.6.1.4.1.207.8.17.10.4.3.1.1.14

atiStkSwLldpDot3RemLinkAggPortId

This object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component associated with the remote system.
…

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.207.8.17.10.4.3.1.1.15

atiStkSwLldpDot3RemMaxFrameSize

An integer value indicating the maximum supported frame
size in octets on the port component associated with the
remote system.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.17.10.4.3.1.1.16

atiStkSwLldpMedRemTable

table

.1.3.6.1.4.1.207.8.17.10.4.4.1 · 1 row entry · 28 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwLldpMedRemTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwLldpMedRemTable'

This table contains LLDP-MED information of the remote
system.

atiStkSwLldpMedRemEntry row .1.3.6.1.4.1.207.8.17.10.4.4.1.1

Information about a particular physical network connection.

Indexes

atiStkSwLldpRemIndex

Column Syntax OID

atiStkSwLldpMedRemModuleId

This object specifies the ID of a module present in the switch
stack.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.1

atiStkSwLldpMedRemPortNum

The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.2

atiStkSwLldpMedRemIndex

This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.3

atiStkSwLldpMedRemDeviceClass

Device Class as advertised by the device remotely connected to the
port.

AtiStkSwLldpMedDeviceClass

Type Values:

0	notDefined
1	endpointClass1
2	endpointClass2
3	endpointClass3
4	networkConnectivity

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.4

atiStkSwLldpMedRemCapabilities

The bitmap includes the MED organizationally defined set of LLDP
TLVs whose transmission is possible on the LLDP agent of the remote
device connected to this port. Each bit in the bitmap corresponds
to an LLDP-MED subty…

AtiStkSwLldpMedCapabilities

Type Values:

0	capabilities
1	networkPolicy
2	location
3	extendedPSE
4	extendedPD
5	inventory

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.5

atiStkSwLldpMedRemMediaPolicyAppType

The media type that defines the primary function of the
application for the policy advertised by the endpoint connected
remotely to this port.

PolicyAppType

Type Values:

0	unknown
1	voice
2	voiceSignaling
3	guestVoice
4	guestVoiceSignaling
5	softPhoneVoice
6	videoconferencing
7	streamingVideo
8	videoSignaling

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.6

atiStkSwLldpMedRemMediaPolicyVlanID

An extension of the VLAN Identifier for the remote system
connected to this port, as defined in IEEE 802.1P-1998.

A value of 1 through 4094 is used to define a valid PVID.

A value of 0 shal…

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.7

atiStkSwLldpMedRemMediaPolicyPriority

This object contains the value of the 802.1p priority
which is associated with the remote system connected at
given port.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.8

atiStkSwLldpMedRemMediaPolicyDscp

This object contains the value of the Differentiated Service
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
which is associated with remote system connected at the port.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.9

atiStkSwLldpMedRemMediaPolicyUnknown

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.10

atiStkSwLldpMedRemMediaPolicyTagged

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.11

atiStkSwLldpMedRemHardwareRev

The vendor-specific hardware revision string
as advertised by the remote endpoint.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.12

atiStkSwLldpMedRemFirmwareRev

The vendor-specific firmware revision string
as advertised by the remote endpoint.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.13

atiStkSwLldpMedRemSoftwareRev

The vendor-specific software revision string
as advertised by the remote endpoint.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.14

atiStkSwLldpMedRemSerialNum

The vendor-specific serial number
as advertised by the remote endpoint.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.15

atiStkSwLldpMedRemMfgName

The vendor-specific manufacturer name
as advertised by the remote endpoint.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.16

atiStkSwLldpMedRemModelName

The vendor-specific model name
as advertised by the remote endpoint.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.17

atiStkSwLldpMedRemAssetID

The vendor-specific asset tracking identifier
as advertised by the remote endpoint.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.18

atiStkSwLldpMedRemXPoEDeviceType

Defines the type of Power-via-MDI (Power over Ethernet) advertised
by the remote device.

A value pseDevice(2) indicates that the device is advertised as a
Power Sourcing Entity (PSE).

A va…

Enumeration

Enumerated Values:

1	unknown
2	pseDevice
3	pdDevice
4	none

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.19

atiStkSwLldpMedRemXPoEPSEPowerAv

This object contains the value of the power available from the
PSE via this port expressed in units of 0.1 watts on the remote
device.

tenth of wattUnsigned32

Constraints:
range: 0-1023

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.20

atiStkSwLldpMedRemXPoEPSEPowerSource

Defines the type of PSE Power Source advertised
by the remote device.

A value primary(2) indicates that the device advertises its power
source as primary.

A value backup(3) indicates that …

Enumeration

Enumerated Values:

1	unknown
2	primary
3	backup

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.21

atiStkSwLldpMedRemXPoEPSEPowerPriority

This object contains the value of the PSE power priority
advertised by the remote device.

A value critical(2) indicates that the device advertises its power
priority as critical, as per RFC 3621.
…

Enumeration

Enumerated Values:

1	unknown
2	critical
3	high
4	low

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.22

atiStkSwLldpMedRemXPoEPDPowerReq

This object contains the value of the power required by a
PD connected remotely to the port
expressed in units of 0.1 watts.

tenth of wattUnsigned32

Constraints:
range: 0-1023

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.23

atiStkSwLldpMedRemXPoEPDPowerSource

Defines the type of Power Source advertised as being used
by the device connected remotely to the port.

A value fromPSE(2) indicates that the device advertises its power
source as received from a PSE.
…

Enumeration

Enumerated Values:

1	unknown
2	fromPSE
3	local
4	localAndPSE

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.24

atiStkSwLldpMedRemXPoEPDPowerPriority

Defines the priority advertised as being required by the PD
connected remotely to the port.

A value critical(2) indicates that the device advertises its power
Priority as critical, as per RFC 3621.
…

Enumeration

Enumerated Values:

1	unknown
2	critical
3	high
4	low

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.25

atiStkSwLldpMedRemCoordLocation

Coordinate based location information

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.26

atiStkSwLldpMedRemCivicLocation

Civic location information

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.27

atiStkSwLldpMedRemElinLocation

Elin location information

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.10.4.4.1.1.28

atiStkSwLldpRemResetTable

table

.1.3.6.1.4.1.207.8.17.10.4.5 · 1 row entry · 3 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwLldpRemResetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwLldpRemResetTable'

This table resets the Neighbor Table of the specified port.

atiStkSwLldpRemResetEntry row .1.3.6.1.4.1.207.8.17.10.4.5.1

Selection of module and port number for Neighbor Table to be reset.

Indexes

atiStkSwLldpRemResetPortNum

Column Syntax OID

atiStkSwLldpRemResetModuleNum

This object specifies the ID of a module present in the switch
stack.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.4.5.1.1

atiStkSwLldpRemResetPortNum

The index value used to identify the port component
for Neighbor Table to be reset.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.10.4.5.1.2

atiStkSwLldpRemReset

Select 'yes' for Neighbor Table to be reset.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.207.8.17.10.4.5.1.3

atiStkSwLldpCivicLocationTable

table

.1.3.6.1.4.1.207.8.17.10.5 · 1 row entry · 1 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwLldpCivicLocationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwLldpCivicLocationTable'

A table of the LLDP civic-location.

atiStkSwLldpCivicLocationEntry row .1.3.6.1.4.1.207.8.17.10.5.1

Attributes of an LLDP civiv-location.

Indexes

atiStkSwLldpCivicLocationIdentifier

Column	Syntax	OID
atiStkSwLldpCivicLocationIdentifier Index into atiStkSwLldpCivicLocationTable.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.10.5.1.1`

atiStkSwLldpCoordLocationTable

table

.1.3.6.1.4.1.207.8.17.10.6 · 1 row entry · 1 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwLldpCoordLocationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwLldpCoordLocationTable'

A table of the LLDP coord-location.

atiStkSwLldpCoordLocationEntry row .1.3.6.1.4.1.207.8.17.10.6.1

Attributes of an LLDP coord-location.

Indexes

atiStkSwLldpCoordLocationIdentifier

Column	Syntax	OID
atiStkSwLldpCoordLocationIdentifier Index into atiStkSwLldpCoordLocationTable.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.10.6.1.1`

atiStkSwLldpElinLocationTable

table

.1.3.6.1.4.1.207.8.17.10.7 · 1 row entry · 2 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwLldpElinLocationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwLldpElinLocationTable'

A table of the LLDP elin-location.

atiStkSwLldpElinLocationEntry row .1.3.6.1.4.1.207.8.17.10.7.1

Attributes of an LLDP elin-location.

Indexes

atiStkSwLldpElinLocationIdentifier

Column	Syntax	OID
atiStkSwLldpElinLocationIdentifier Index into atiStkSwLldpElinLocationTable.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.10.7.1.1`
atiStkSwLldpElinLocationElinId The name of the elin-location.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.10.7.1.2`

atiStkSwLldpSetCivicLocationTable

table

.1.3.6.1.4.1.207.8.17.10.8 · 1 row entry · 32 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwLldpSetCivicLocationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwLldpSetCivicLocationTable'

A table of the LLDP set civic-location.

atiStkSwLldpSetCivicLocationEntry row .1.3.6.1.4.1.207.8.17.10.8.1

Attributes of an LLDP set civic-location.

Indexes

atiStkSwLldpSetCivicLocationIdentifier

Column	Syntax	OID
atiStkSwLldpSetCivicLocationIdentifier Index into atiStkSwLldpSetCivicLocationTable.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.10.8.1.1`
atiStkSwLldpSetCivicLocationCountry The country of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.2`
atiStkSwLldpSetCivicLocationState The state of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.3`
atiStkSwLldpSetCivicLocationCounty The county of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.4`
atiStkSwLldpSetCivicLocationCity The city of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.5`
atiStkSwLldpSetCivicLocationDivision The division of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.6`
atiStkSwLldpSetCivicLocationNeighborhood The neighborhood of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.7`
atiStkSwLldpSetCivicLocationStreetGroup The street group of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.8`
atiStkSwLldpSetCivicLocationLeadingStreetDirection The leading street direction of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.9`
atiStkSwLldpSetCivicLocationTrailingStreetDirection The trailing street direction of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.10`
atiStkSwLldpSetCivicLocationStreetSuffix The street suffix of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.11`
atiStkSwLldpSetCivicLocationHouseNumber The house number of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.12`
atiStkSwLldpSetCivicLocationHouseNumberSuffix The house number suffix of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.13`
atiStkSwLldpSetCivicLocationLandmark The landmark of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.14`
atiStkSwLldpSetCivicLocationAdditionalInformation The additional information of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.15`
atiStkSwLldpSetCivicLocationName The name of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.16`
atiStkSwLldpSetCivicLocationPostalCode The postal code of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.17`
atiStkSwLldpSetCivicLocationBuilding The building of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.18`
atiStkSwLldpSetCivicLocationUnit The unit of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.19`
atiStkSwLldpSetCivicLocationFloor The floor of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.20`
atiStkSwLldpSetCivicLocationRoom The room of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.21`
atiStkSwLldpSetCivicLocationPlaceType The place type of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.22`
atiStkSwLldpSetCivicLocationPostalCommunityName The postal community name of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.23`
atiStkSwLldpSetCivicLocationPostOfficeBox The post office box of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.24`
atiStkSwLldpSetCivicLocationAdditionalCode The additional code of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.25`
atiStkSwLldpSetCivicLocationSeat The seat of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.26`
atiStkSwLldpSetCivicLocationPrimaryRoadName The primary road name of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.27`
atiStkSwLldpSetCivicLocationRoadSection The road section of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.28`
atiStkSwLldpSetCivicLocationBranchRoadName The branch road name of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.29`
atiStkSwLldpSetCivicLocationSubBranchRoadName The sub branch road name of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.30`
atiStkSwLldpSetCivicLocationStreetNamePreModifier The street name pre modifier of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.31`
atiStkSwLldpSetCivicLocationStreetNamePostModifier The street name post modifier of the civic-location.	OctetStringr/w Constraints: `range: 0-250`	`.1.3.6.1.4.1.207.8.17.10.8.1.32`

atiStkSwLldpSetCoordLocationTable

table

.1.3.6.1.4.1.207.8.17.10.9 · 1 row entry · 7 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwLldpSetCoordLocationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwLldpSetCoordLocationTable'

A table of the LLDP set Coord-location.

atiStkSwLldpSetCoordLocationEntry row .1.3.6.1.4.1.207.8.17.10.9.1

Attributes of an LLDP set Coord-location.

Indexes

atiStkSwLldpSetCoordLocationIdentifier

Column	Syntax	OID
atiStkSwLldpSetCoordLocationIdentifier Index into atiStkSwLldpSetCoordLocationTable.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.10.9.1.1`
atiStkSwLldpSetCoordLocationLatitude Latitude for set Coord-location.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.10.9.1.2`
atiStkSwLldpSetCoordLocationLatResolution Latitude Resolution for set Coord-location.	Integer32r/w Constraints: `range: 0-34`	`.1.3.6.1.4.1.207.8.17.10.9.1.3`
atiStkSwLldpSetCoordLocationLongitude Longitude for set Coord-location.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.10.9.1.4`
atiStkSwLldpSetCoordLocationLongiResolution Longitude Resolution for set Coord-location.	Integer32r/w Constraints: `range: 0-34`	`.1.3.6.1.4.1.207.8.17.10.9.1.5`
atiStkSwLldpSetCoordLocationAltitude Altitude for set Coord-location.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.10.9.1.6`
atiStkSwLldpSetCoordLocationAltResolution Alt Resolution for set Coord-location.	Integer32r/w Constraints: `range: 0-30`	`.1.3.6.1.4.1.207.8.17.10.9.1.8`

atiSflowRcvrTable

table

.1.3.6.1.4.1.207.8.17.11.1 · 1 row entry · 3 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiSflowRcvrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiSflowRcvrTable'

A table of the receivers of sFlow information.

atiSflowRcvrEntry row .1.3.6.1.4.1.207.8.17.11.1.1

Attributes of an sFlow Receiver.

Indexes

atiSflowRcvrIndex

Column	Syntax	OID
atiSflowRcvrIndex Index into sFlowReceiverTable.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.11.1.1.1`
atiSflowRcvrAddress The IP address of the sFlow collector. If set to 0.0.0.0 not sFlow datagrams will be sent.	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.207.8.17.11.1.1.2`
atiSflowRcvrPort The destination port for sFlow datagrams.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.11.1.1.3`

atiSflowFsTable

table

.1.3.6.1.4.1.207.8.17.12.1 · 1 row entry · 2 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiSflowFsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiSflowFsTable'

A table of the flow samplers within a device.

atiSflowFsEntry row .1.3.6.1.4.1.207.8.17.12.1.1

Attributes of a flow sampler.

Indexes

atiSflowFsPort

Column	Syntax	OID
atiSflowFsPort The sFlow instance for this flow sampler.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.12.1.1.1`
atiSflowFsPacketSamplingRate The statistical sampling rate for packet sampling from this source. Set to N to sample 1/Nth of the packets in the monitored flows. An agent should choose its own algorithm to introduce variance into the sampling so tha…	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.12.1.1.2`

atiSflowCpTable

table

.1.3.6.1.4.1.207.8.17.13.1 · 1 row entry · 2 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiSflowCpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiSflowCpTable'

A table of the counter pollers within a device.

atiSflowCpEntry row .1.3.6.1.4.1.207.8.17.13.1.1

Attributes of a counter poller.

Indexes

atiSflowCpPort

Column	Syntax	OID
atiSflowCpPort The sFlowInstance for this counter poller.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.13.1.1.1`
atiSflowCpInterval The maximum number of seconds between successive samples of the counters associated with this data source. A sampling interval of 0 disables counter sampling. The agent is permitted to have minimum and maximum allowable…	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.13.1.1.2`

atiSflowSetTable

table

.1.3.6.1.4.1.207.8.17.14.1 · 1 row entry · 3 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiSflowSetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiSflowSetTable'

A table of the sFlow set function.

atiSflowSetEntry row .1.3.6.1.4.1.207.8.17.14.1.1

Attributes of an sFlow Set.

Indexes

atiSflowSetIndex

Column	Syntax	OID
atiSflowSetIndex Index into sFlowSetTable.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.14.1.1.1`
atiSflowSetAddress The IP address of the sFlow collector. If set to 0.0.0.0 not sFlow datagrams will be sent.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.207.8.17.14.1.1.2`
atiSflowSetPort The port for sFlow Sampler or Poller.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.14.1.1.3`

atiSflowEnableTable

table

.1.3.6.1.4.1.207.8.17.15.1 · 1 row entry · 1 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiSflowEnableTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiSflowEnableTable'

A table of the sFlow enable function.

atiSflowEnableEntry row .1.3.6.1.4.1.207.8.17.15.1.1

Attributes of an sFlow Enable.

Indexes

atiSflowEnablePort

Column	Syntax	OID
atiSflowEnablePort Index into sFlowEnableTable.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.15.1.1.1`

atiAQosPortConfigurationTable

table

.1.3.6.1.4.1.207.8.17.17.1 · 1 row entry · 12 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiAQosPortConfigurationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiAQosPortConfigurationTable'

atiAQosPortConfigurationTable

atiAQosPortConfigurationEntry row .1.3.6.1.4.1.207.8.17.17.1.1

Indexes

atiAQosPortConfigurationPortId

Column Syntax OID

atiAQosPortConfigurationPortId

Index into atiAQosPortConfigurationTable

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.17.1.1.1

atiAQosPortConfigurationStatus

Status

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.207.8.17.17.1.1.2

atiAQosPortConfigurationDefaultQueue

Default queue

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.17.1.1.3

atiAQosPortConfigurationSchedularAndQueueWeightList

Schedular and queue weight list

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.207.8.17.17.1.1.4

atiAQosPortConfigurationWRREgressRateQ0

WRR egress rate Queue 0

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.17.1.1.5

atiAQosPortConfigurationWRREgressRateQ1

WRR egress rate Queue 1

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.17.1.1.6

atiAQosPortConfigurationWRREgressRateQ2

WRR egress rate Queue 2

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.17.1.1.7

atiAQosPortConfigurationWRREgressRateQ3

WRR egress rate Queue 3

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.17.1.1.8

atiAQosPortConfigurationWRREgressRateQ4

WRR egress rate Queue 4

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.17.1.1.9

atiAQosPortConfigurationWRREgressRateQ5

WRR egress rate Queue 5

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.17.1.1.10

atiAQosPortConfigurationWRREgressRateQ6

WRR egress rate Queue 6

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.17.1.1.11

atiAQosPortConfigurationWRREgressRateQ7

WRR egress rate Queue 7

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.17.1.1.12

atiAQosCosQueueMapTable

table

.1.3.6.1.4.1.207.8.17.17.2 · 1 row entry · 10 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiAQosCosQueueMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiAQosCosQueueMapTable'

atiAQosCosQueueMapTable

atiAQosCosQueueMapEntry row .1.3.6.1.4.1.207.8.17.17.2.1

Indexes

atiAQosCosQueueMapPortId

Column Syntax OID

atiAQosCosQueueMapPortId

Index into atiAQosCosQueueMapTable

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.17.2.1.1

atiAQosCosQueueMapCos0Queue

Cos 0 queue

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.17.2.1.2

atiAQosCosQueueMapCos1Queue

Cos 1 queue

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.17.2.1.3

atiAQosCosQueueMapCos2Queue

Cos 2 queue

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.17.2.1.4

atiAQosCosQueueMapCos3Queue

Cos 3 queue

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.17.2.1.5

atiAQosCosQueueMapCos4Queue

Cos 4 queue

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.17.2.1.6

atiAQosCosQueueMapCos5Queue

Cos 5 queue

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.17.2.1.7

atiAQosCosQueueMapCos6Queue

Cos 6 queue

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.17.2.1.8

atiAQosCosQueueMapCos7Queue

Cos 7 queue

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.17.17.2.1.9

atiAQosCosQueueMapDefaultMap

Default map

Enumerationr/w

Enumerated Values:

0	no
1	yes

.1.3.6.1.4.1.207.8.17.17.2.1.10

atiAQosDscpQueueMapTable

table

.1.3.6.1.4.1.207.8.17.17.3 · 1 row entry · 10 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiAQosDscpQueueMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiAQosDscpQueueMapTable'

atiAQosDscpQueueMapTable

atiAQosDscpQueueMapEntry row .1.3.6.1.4.1.207.8.17.17.3.1

Indexes

atiAQosDscpQueueMapPortId

Column Syntax OID

atiAQosDscpQueueMapPortId

Index into atiAQosDscpQueueMapTable

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.17.3.1.1

atiAQosDscpQueueMapQueue0

Queue 0

OctetStringr/w

Constraints:
range: 0-150

.1.3.6.1.4.1.207.8.17.17.3.1.2

atiAQosDscpQueueMapQueue1

Queue 1

OctetStringr/w

Constraints:
range: 0-150

.1.3.6.1.4.1.207.8.17.17.3.1.3

atiAQosDscpQueueMapQueue2

Queue 2

OctetStringr/w

Constraints:
range: 0-150

.1.3.6.1.4.1.207.8.17.17.3.1.4

atiAQosDscpQueueMapQueue3

Queue 3

OctetStringr/w

Constraints:
range: 0-150

.1.3.6.1.4.1.207.8.17.17.3.1.5

atiAQosDscpQueueMapQueue4

Queue 4

OctetStringr/w

Constraints:
range: 0-150

.1.3.6.1.4.1.207.8.17.17.3.1.6

atiAQosDscpQueueMapQueue5

Queue 5

OctetStringr/w

Constraints:
range: 0-150

.1.3.6.1.4.1.207.8.17.17.3.1.7

atiAQosDscpQueueMapQueue6

Queue 6

OctetStringr/w

Constraints:
range: 0-150

.1.3.6.1.4.1.207.8.17.17.3.1.8

atiAQosDscpQueueMapQueue7

Queue 7

OctetStringr/w

Constraints:
range: 0-150

.1.3.6.1.4.1.207.8.17.17.3.1.9

atiAQosDscpQueueMapDefaultMap

Default map

Enumerationr/w

Enumerated Values:

0	no
1	yes

.1.3.6.1.4.1.207.8.17.17.3.1.10

atiAQosAggregatePolicerTable

table

.1.3.6.1.4.1.207.8.17.17.4 · 1 row entry · 8 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiAQosAggregatePolicerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiAQosAggregatePolicerTable'

atiAQosAggregatePolicerTable

atiAQosAggregatePolicerEntry row .1.3.6.1.4.1.207.8.17.17.4.1

Indexes

atiAQosAggregatePolicerIndex

Column Syntax OID

atiAQosAggregatePolicerIndex

Index into atiAQosAggregatePolicerTable

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.17.4.1.1

atiAQosAggregatePolicerName

Aggregate police name

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.207.8.17.17.4.1.2

atiAQosAggregatePolicerRate

Rate

Enumerationr/w

Enumerated Values:

0	single-rate
1	twin-rate

.1.3.6.1.4.1.207.8.17.17.4.1.3

atiAQosAggregatePolicerCIRkbps

CIR kbps

Integer32r/w

Constraints:
range: 1-16000000

.1.3.6.1.4.1.207.8.17.17.4.1.4

atiAQosAggregatePolicerCBSb

CBS b

Integer32r/w

Constraints:
range: 1-1677216

.1.3.6.1.4.1.207.8.17.17.4.1.5

atiAQosAggregatePolicerPIRkbps

PIR kbps

Integer32r/w

Constraints:
range: 1-16000000

.1.3.6.1.4.1.207.8.17.17.4.1.6

atiAQosAggregatePolicerPBSb

PBS b

Integer32r/w

Constraints:
range: 1-1677216

.1.3.6.1.4.1.207.8.17.17.4.1.7

atiAQosAggregatePolicerAction

Action

Enumerationr/w

Enumerated Values:

1	policed-dscp
14	drop-red

.1.3.6.1.4.1.207.8.17.17.4.1.8

atiAQosInterfacePolicyTable

table

.1.3.6.1.4.1.207.8.17.17.5 · 1 row entry · 2 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiAQosInterfacePolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiAQosInterfacePolicyTable'

atiAQosInterfacePolicyTable

atiAQosInterfacePolicyEntry row .1.3.6.1.4.1.207.8.17.17.5.1

Indexes

atiAQosInterfacePolicyPortId

Column	Syntax	OID
atiAQosInterfacePolicyPortId Index into atiAQosInterfacePolicyTable	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.17.5.1.1`
atiAQosInterfacePolicyMapName Policy map name	OctetStringr/w Constraints: `range: 0-255`	`.1.3.6.1.4.1.207.8.17.17.5.1.2`

atiAQosPolicyMapTable

table

.1.3.6.1.4.1.207.8.17.17.6 · 1 row entry · 11 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiAQosPolicyMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiAQosPolicyMapTable'

atiAQosPolicyMapTable

atiAQosPolicyMapEntry row .1.3.6.1.4.1.207.8.17.17.6.1

Indexes

atiAQosPolicyMapIndex

Column	Syntax	OID
atiAQosPolicyMapIndex Index into atiAQosPolicyMapTable	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.17.6.1.1`
atiAQosPolicyMapPolicyName Policy name	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.207.8.17.17.6.1.2`
atiAQosPolicyMapClassName Class name	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.207.8.17.17.6.1.3`
atiAQosPolicyMapCosAction Cos action	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.17.6.1.4`
atiAQosPolicyMapDscpAction Dscp action	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.17.6.1.5`
atiAQosPolicyMapIpNextHopAction Ip next hop action	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.207.8.17.17.6.1.6`
atiAQosPolicyMapQueueAction Queue action	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.17.6.1.7`
atiAQosPolicyMapPoliceAggregateAction Police aggregate action	OctetStringr/w Constraints: `range: 0-255`	`.1.3.6.1.4.1.207.8.17.17.6.1.9`
atiAQosPolicyMapStormDowntimeAction Storm downtime action	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.17.6.1.11`
atiAQosPolicyMapStormRateAction Storm rate action	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.17.6.1.12`
atiAQosPolicyMapStormWindowAction Storm window action	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.17.6.1.13`

atiAQosClassMapTable

table

.1.3.6.1.4.1.207.8.17.17.7 · 1 row entry · 13 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiAQosClassMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiAQosClassMapTable'

atiAQosClassMapTable

atiAQosClassMapEntry row .1.3.6.1.4.1.207.8.17.17.7.1

Indexes

atiAQosClassMapIndex

Column	Syntax	OID
atiAQosClassMapIndex Index into atiAQosClassMapTable	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.17.7.1.1`
atiAQosClassMapClassName Class name	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.207.8.17.17.7.1.2`
atiAQosClassMapAccessGroupMatch Access group match	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.17.7.1.3`
atiAQosClassMapCosMatch Cos match	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.17.7.1.4`
atiAQosClassMapDscpMatch Dscp match	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.17.7.1.5`
atiAQosClassMapInnerCosMatch Inner cos match	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.17.7.1.6`
atiAQosClassMapInnerVlanMatch Inner vlan match	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.17.7.1.7`
atiAQosClassMapIpPrecedenceMatch Ip precedence vlan match	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.17.7.1.8`
atiAQosClassMapMacTypeMatch Mac type match	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.17.7.1.9`
atiAQosClassVlanMatch Vlan match	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.17.7.1.10`
atiAQosClassTcpFlagsMatch Tcp flags match	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.17.7.1.11`
atiAQosClassL2FormatMatch L2 format match	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.17.7.1.12`
atiAQosClassL3ProtocolMatch L3 protocol match	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.17.7.1.13`

atiStkSwAACLIpv4ConfigTable

table

.1.3.6.1.4.1.207.8.17.18.1 · 1 row entry · 21 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwAACLIpv4ConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwAACLIpv4ConfigTable'

This table contains a Access Control List (ACL) for Ipv4 
addresses in the switch and their associated attributes.

atiStkSwAACLIpv4ConfigEntry row .1.3.6.1.4.1.207.8.17.18.1.1

This object specifies an entry in 'atiStkSwACLConfigTable'
that describes the ACL in the switch.

Indexes

atiStkSwAACLId

Column Syntax OID

atiStkSwAACLId

This object specifies the ID of the ACL table.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.17.18.1.1.1

atiStkSwAACLStatus

This object specifies the status of the ACL ID.

Enumerationr/w

Enumerated Values:

1	create
2	delete

.1.3.6.1.4.1.207.8.17.18.1.1.2

atiStkSwAACLName

This object specifies the name of the ACL.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.18.1.1.3

atiStkSwAACLAction

The action of the ACL entry either deny or permit or copy to mirror.

Enumerationr/w

Enumerated Values:

1	deny
2	permit
3	copytomirror

.1.3.6.1.4.1.207.8.17.18.1.1.4

atiStkSwAACLTrafficType

The Object specifies the traffic type of the ACL.

Enumerationr/w

Enumerated Values:

1	icmp
2	ip
3	proto
4	tcp
5	udp

.1.3.6.1.4.1.207.8.17.18.1.1.5

atiStkSwAACLSrcType

The Object specifies the source type of the ACL.

Enumerationr/w

Enumerated Values:

1	any
2	host
3	ip

.1.3.6.1.4.1.207.8.17.18.1.1.6

atiStkSwAACLSrcAddr

This object displays the IPv4 address of the source of an ACL.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.17.18.1.1.7

atiStkSwAACLSrcMask

This object displays the IPv4 mask of the source of an ACL.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.17.18.1.1.8

atiStkSwAACLDestType

The Object specifies the destination type of the ACL.

Enumerationr/w

Enumerated Values:

1	any
2	host
3	ip

.1.3.6.1.4.1.207.8.17.18.1.1.9

atiStkSwAACLDestAddr

This object displays the IPv4 address of the destination of an ACL.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.17.18.1.1.10

atiStkSwAACLDestMask

This object displays the IPv4 mask of the destination of an ACL.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.17.18.1.1.11

atiStkSwAACLVlanId

This object specifies the Vlan ID of the ACL table.

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.207.8.17.18.1.1.12

atiStkSwAACLProtocol

This object specifies the Protocol ID of the ACL table.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.17.18.1.1.13

atiStkSwAACLICMPType

This object specifies the ICMP Type of the ACL table.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.18.1.1.14

atiStkSwAACLUDPTCPSrcPort

The Object specifies the comparision of the port.

Enumerationr/w

Enumerated Values:

1	eq
2	lt
3	gt
4	ne
5	range
6	noCompare

.1.3.6.1.4.1.207.8.17.18.1.1.15

atiStkSwAACLSrcPort1

This object specifies the port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.17.18.1.1.16

atiStkSwAACLSrcPort2

This object specifies the port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.17.18.1.1.17

atiStkSwAACLUDPTCPDestPort

The Object specifies the comparision of the port.

Enumerationr/w

Enumerated Values:

1	eq
2	lt
3	gt
4	ne
5	range
6	noCompare

.1.3.6.1.4.1.207.8.17.18.1.1.18

atiStkSwAACLDestPort1

This object specifies the port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.17.18.1.1.19

atiStkSwAACLDestPort2

This object specifies the port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.17.18.1.1.20

atiStkSwAACLTimeRange

This object specifies the time range ACL.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.18.1.1.21

atiStkSwAACLIpv6ConfigTable

table

.1.3.6.1.4.1.207.8.17.18.2 · 1 row entry · 21 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwAACLIpv6ConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwAACLIpv6ConfigTable'

This table contains a Access Control List (ACL) for Ipv4 
addresses in the switch and their associated attributes.

atiStkSwAACLIpv6ConfigEntry row .1.3.6.1.4.1.207.8.17.18.2.1

This object specifies an entry in 'atiStkSwACLConfigTable'
that describes the ACL in the switch.

Indexes

atiStkSwAACLv6Id

Column Syntax OID

atiStkSwAACLv6Id

This object specifies the ID of the ACL table.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.18.2.1.1

atiStkSwAACLv6Status

This object specifies the status of the ACL ID.

Enumerationr/w

Enumerated Values:

1	create
2	delete

.1.3.6.1.4.1.207.8.17.18.2.1.2

atiStkSwAACLv6Name

This object specifies the name of the ACL.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.18.2.1.3

atiStkSwAACLv6Action

The action of the ACL entry either deny or permit or copy to mirror.

Enumerationr/w

Enumerated Values:

1	deny
2	permit
3	copytomirror

.1.3.6.1.4.1.207.8.17.18.2.1.4

atiStkSwAACLv6TrafficType

The Object specifies the traffic type of the ACL.

Enumerationr/w

Enumerated Values:

1	icmp
2	ip
3	proto
4	tcp
5	udp

.1.3.6.1.4.1.207.8.17.18.2.1.5

atiStkSwAACLv6SrcType

The Object specifies the source type of the ACL.

Enumerationr/w

Enumerated Values:

1	any
2	host
3	ip

.1.3.6.1.4.1.207.8.17.18.2.1.6

atiStkSwAACLv6SrcAddr

This object displays the IPv6 address of the source of an ACL.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.17.18.2.1.7

atiStkSwAACLv6SrcMask

This object displays the IPv6 mask of the source of an ACL.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.17.18.2.1.8

atiStkSwAACLv6DestType

The Object specifies the destination type of the ACL.

Enumerationr/w

Enumerated Values:

1	any
2	host
3	ip

.1.3.6.1.4.1.207.8.17.18.2.1.9

atiStkSwAACLv6DestAddr

This object displays the IPv6 address of the destination of an ACL.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.17.18.2.1.10

atiStkSwAACLv6DestMask

This object displays the IPv6 mask of the destination of an ACL.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.17.18.2.1.11

atiStkSwAACLv6VlanId

This object specifies the Vlan ID of the ACL table.

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.207.8.17.18.2.1.12

atiStkSwAACLv6Protocol

This object specifies the Protocol ID of the ACL table.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.17.18.2.1.13

atiStkSwAACLv6ICMPType

This object specifies the ICMP Type of the ACL table.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.18.2.1.14

atiStkSwAACLv6UDPTCPSrcPort

The Object specifies the comparision of the port.

Enumerationr/w

Enumerated Values:

1	eq
2	lt
3	gt
4	ne
5	range
6	noCompare

.1.3.6.1.4.1.207.8.17.18.2.1.15

atiStkSwAACLv6SrcPort1

This object specifies the port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.17.18.2.1.16

atiStkSwAACLv6SrcPort2

This object specifies the port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.17.18.2.1.17

atiStkSwAACLv6UDPTCPDestPort

The Object specifies the comparision of the port.

Enumerationr/w

Enumerated Values:

1	eq
2	lt
3	gt
4	ne
5	range
6	noCompare

.1.3.6.1.4.1.207.8.17.18.2.1.18

atiStkSwAACLv6DestPort1

This object specifies the port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.17.18.2.1.19

atiStkSwAACLv6DestPort2

This object specifies the port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.17.18.2.1.20

atiStkSwAACLv6TimeRange

This object specifies the time range ACL.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.18.2.1.21

atiStkSwAACLInterfaceConfigTable

table

.1.3.6.1.4.1.207.8.17.18.3 · 1 row entry · 5 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwAACLInterfaceConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwAACLInterfaceConfigTable'

This table contains a Access Control List (ACL) in the
switch and their associated attributes.

atiStkSwAACLInterfaceConfigEntry row .1.3.6.1.4.1.207.8.17.18.3.1

This object specifies an entry in 'atiStkSwACLMACConfigTable'
that describes the ACL in the switch.

Indexes

atiStkSwAACLInterfaceModuleId atiStkSwAACLInterfacePortId

Column	Syntax	OID
atiStkSwAACLInterfaceModuleId This object specifies the Module ID of the system.	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.207.8.17.18.3.1.1`
atiStkSwAACLInterfacePortId This object specifies the Port ID of the system.	Integer32 Constraints: `range: 1-28`	`.1.3.6.1.4.1.207.8.17.18.3.1.2`
atiStkSwAACLInterfacaeACLName This object specifies the created ACL ID.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.18.3.1.3`
atiStkSwAACLInterfacaeAddACLName This object specifies the ACL ID to Add.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.18.3.1.4`
atiStkSwAACLInterfacaeRemoveACLName This object specifies the ACL ID to Remove.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.18.3.1.5`

atiStkSwAACLTimeRangeConfigTable

table

.1.3.6.1.4.1.207.8.17.18.4 · 1 row entry · 9 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwAACLTimeRangeConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwAACLTimeRangeConfigTable'

This table contains a time range Access Control List (ACL) in the
switch and their associated attributes.

atiStkSwAACLTimeRangeConfigEntry row .1.3.6.1.4.1.207.8.17.18.4.1

This object specifies an entry in 'atiStkSwAACLTimeRangeAbsoluteConfigTable'
that describes the ACL in the switch.

Indexes

atiStkSwAACLTimeRangeEntry

Column Syntax OID

atiStkSwAACLTimeRangeEntry

This object specifies the entry of the time range ACL.

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.207.8.17.18.4.1.1

atiStkSwAACLTimeRangeName

This object specifies the Name of the time range ACL.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.18.4.1.2

atiStkSwAACLTimeRangeType

This object specifies the type of the time range ACL.

Enumerationr/w

Enumerated Values:

1	absolute
2	periodic
3	none

.1.3.6.1.4.1.207.8.17.18.4.1.3

atiStkSwAACLTimeRangeAbsoluteStartTime

This object specifies the start time of the time range ACL.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.18.4.1.4

atiStkSwAACLTimeRangeAbsoluteEndTime

This object specifies the end time of the time range ACL.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.18.4.1.5

atiStkSwAACLTimeRangePeriodicFrequency

This object specifies the Frequency of days for periodic time range ACL.

Enumerationr/w

Enumerated Values:

1	day
2	daily
3	weekdays
4	weekends
5	notvalid
6	select

.1.3.6.1.4.1.207.8.17.18.4.1.6

atiStkSwAACLTimeRangePeriodicStartTime

This object specifies the start time of the periodic time range ACL.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.18.4.1.7

atiStkSwAACLTimeRangePeriodicEndTime

This object specifies the end time of the periodic time range ACL.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.18.4.1.8

atiStkSwAACLTimeRangeStatus

This object specifies the status of the time range ACL.

Enumerationr/w

Enumerated Values:

1	create
2	delete

.1.3.6.1.4.1.207.8.17.18.4.1.9

atiStkSwAACLIPV4MACConfigTable

table

.1.3.6.1.4.1.207.8.17.18.5 · 1 row entry · 11 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwAACLIPV4MACConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwAACLIPV4MACConfigTable'

This table contains a Access Control List (ACL) in the
switch and their associated attributes.

atiStkSwAACLIPV4MACConfigEntry row .1.3.6.1.4.1.207.8.17.18.5.1

This object specifies an entry in 'atiStkSwACLMACConfigTable'
that describes the ACL in the switch.

Indexes

atiStkSwAACLIPV4MACId

Column Syntax OID

atiStkSwAACLIPV4MACId

This object specifies the ID of the ACL table.

Integer32

Constraints:
range: 1-700

.1.3.6.1.4.1.207.8.17.18.5.1.1

atiStkSwAACLIPV4MACName

This object specifies the name of the ACL.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.18.5.1.3

atiStkSwAACLIPV4MACAction

The action of the ACL entry either deny or permit or copy to mirror.

Enumerationr/w

Enumerated Values:

1	deny
2	permit
3	copytomirror

.1.3.6.1.4.1.207.8.17.18.5.1.4

atiStkSwAACLIPV4MACSrc

This object specifies the source type.

Enumerationr/w

Enumerated Values:

1	any
2	mac

.1.3.6.1.4.1.207.8.17.18.5.1.5

atiStkSwAACLIPV4MACDest

This object specifies destination type.

Enumerationr/w

Enumerated Values:

1	any
2	mac

.1.3.6.1.4.1.207.8.17.18.5.1.6

atiStkSwAACLIPV4MACSrcMac

The MAC address Mask used by this source.

OctetStringr/w

Constraints:
range: 1-18

.1.3.6.1.4.1.207.8.17.18.5.1.7

atiStkSwAACLIPV4MACSrcMacMask

The MAC address Mask used by this source .

OctetStringr/w

Constraints:
range: 1-18

.1.3.6.1.4.1.207.8.17.18.5.1.8

atiStkSwAACLIPV4MACDestMac

The MAC address used by this destination.

OctetStringr/w

Constraints:
range: 1-18

.1.3.6.1.4.1.207.8.17.18.5.1.9

atiStkSwAACLIPV4MACDestMacMask

The MAC address Mask used by this destination.

OctetStringr/w

Constraints:
range: 1-18

.1.3.6.1.4.1.207.8.17.18.5.1.10

atiStkSwAACLIPV4MACVlanId

This object specifies the Vlan ID of the ACL table.

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.207.8.17.18.5.1.11

atiStkSwAACLIPV4MACTimeRange

This object specifies the time range ACL.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.18.5.1.12

atiStkSwMSTPMstInstanceConfigTable

table

.1.3.6.1.4.1.207.8.17.19.2 · 1 row entry · 3 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwMSTPMstInstanceConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwMSTPMstInstanceConfigTable'

This table contains a mst-config Instance associated attributes.

atiStkSwMSTPMstInstanceConfigEntry row .1.3.6.1.4.1.207.8.17.19.2.1

This object specifies an entry in 'atiStkSwMSTPMstInstanceConfigTable'
that describes the mst config in the switch.

Indexes

atiStkSwMSTPMstInstanceId

Column	Syntax	OID
atiStkSwMSTPMstInstanceId This object specifies the Instance ID for MSTP.	Integer32 Constraints: `range: 1-15`	`.1.3.6.1.4.1.207.8.17.19.2.1.1`
atiStkSwMSTPMstInstanceVlan This object associates the Instance ID with vlanId for MSTP.	Integer32r/w Constraints: `range: 1-4094`	`.1.3.6.1.4.1.207.8.17.19.2.1.2`
atiStkSwMSTPMstInstancePriority This object associates the Instance ID with priority for MSTP.	Integer32r/w Constraints: `range: 0-61440`	`.1.3.6.1.4.1.207.8.17.19.2.1.3`

atiStkSwMSTPMstInterfaceConfigTable

table

.1.3.6.1.4.1.207.8.17.19.3 · 1 row entry · 5 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwMSTPMstInterfaceConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwMSTPMstInterfaceConfigTable'

This table contains a mstp interface level config.

atiStkSwMSTPMstInterfaceConfigEntry row .1.3.6.1.4.1.207.8.17.19.3.1

This object specifies an entry in 'atiStkSwMSTPMstInterfaceConfigTable'
that describes the mstp interface levl config in the switch.

Indexes

atiStkSwMSTPMstInterfaceModuleId atiStkSwMSTPMstInterfacePortId

Column	Syntax	OID
atiStkSwMSTPMstInterfaceModuleId This object specifies the module ID for MSTP.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.19.3.1.1`
atiStkSwMSTPMstInterfacePortId This object specifies the port ID for MSTP.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.19.3.1.2`
atiStkSwMSTPMstInterfaceInstanceId This object associates the port ID with instance id for MSTP.	Integer32r/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.207.8.17.19.3.1.3`
atiStkSwMSTPMstInterfacePathCost This object associates the path cost with instance id for MSTP.	Integer32r/w Constraints: `range: 1-200000000`	`.1.3.6.1.4.1.207.8.17.19.3.1.4`
atiStkSwMSTPMstInterfacePriority This object associates the priority with instance id for MSTP.	Integer32r/w Constraints: `range: 0-61440`	`.1.3.6.1.4.1.207.8.17.19.3.1.6`

atiStkSwMVRInterfaceConfigTable

table

.1.3.6.1.4.1.207.8.17.20.2 · 1 row entry · 3 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwMVRInterfaceConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwMVRInterfaceConfigTable'

This table contains a MVR interface level attributes.

atiStkSwMVRInterfaceConfigEntry row .1.3.6.1.4.1.207.8.17.20.2.1

This object specifies an entry in 'atiStkSwMVRInterfaceConfigTable'
that describes the MVR config in switch.

Indexes

atiStkSwMVRInterfaceIndex

Column Syntax OID

atiStkSwMVRInterfaceIndex

This object specifies the index for MVR.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.17.20.2.1.1

atiStkSwMVRInterfacePortId

This object specifies the port ID for MVR.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.17.20.2.1.2

atiStkSwMVRInterfaceType

This object associates the type with port Id for MSTP.

Enumerationr/w

Enumerated Values:

1	source
2	receiver
3	none

.1.3.6.1.4.1.207.8.17.20.2.1.3

atiStkSwPSTACKInterfaceConfigTable

table

.1.3.6.1.4.1.207.8.17.21.2 · 1 row entry · 4 columns

Open in standard view

Uses the allied-old variant from /opt/observium/mibs/allied-old.

Command help

Walk atiStkSwPSTACKInterfaceConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9000-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9000-MIB::atiStkSwPSTACKInterfaceConfigTable'

This table contains a PStack interface level attributes.

atiStkSwPSTACKInterfaceConfigEntry row .1.3.6.1.4.1.207.8.17.21.2.1

This object specifies an entry in 'atiStkSwPStackInterfaceConfigTable'
that describes the PStack config in switch.

Indexes

atiStkSwPSTACKInterfaceDeviceId

Column	Syntax	OID
atiStkSwPSTACKInterfaceDeviceId This object specifies the Device ID for PStack.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.17.21.2.1.1`
atiStkSwPSTACKInterfaceMacAddress This object associates the Mac Address with Device Id for PStack.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.17.21.2.1.2`
atiStkSwPSTACKInterfaceSwVersion This object associates the Software Version with Device Id for PStack.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.21.2.1.3`
atiStkSwPSTACKInterfaceModel This object associates the Model type with Device Id for PStack.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.17.21.2.1.4`