AcBoard

        AudioCodes Proprietary MIB 
Contains The managed objects of AudioCodes systems.
Through this MIB, the User can set up the board configuration parameters, reset the board, 
	 and monitor the board's operational robustness and quality of service during run-time. 
        
This MIB has the following Groups: 
	    boardConfiguration     
	    boardInformation   
	    channelConfiguration 
	    channelStatus 
	    notifications    
	    reset
        
boardConfiguration:     
   When The user Get Parameter from most of sub-groups in boardConfiguration group, 
	    he gets the value that should be burned to the board after the next Remote Reset. 
	    He can Set new values to many parameters, and these values will burned to the board after the next remote Reset 
   In the sub-group mGCPDefaultChannelSettings the parameters are the actual parameters, 
	    that will take place when opening channel. (Reset is not needed for that sub-group).
        
BoardInformation: 
   Contains Read-only parameters like: board name, serial number, number of channels, software version.
        
ChannelConfiguration:
   Read-only Parameters to see the configuratin of each channel: voice settings, fax settings, etc.         
        
ChannelStatus:
   Read-only parameters about the status of channel, like: Is the channle active, is it in Silence Period, 
		is it in Fax mode, ON/Off hook, etc. 
   This group contains also counters: packets to DSP, errors, lost packets, underruns, etc.
        
Notifications:
   In this version, the notification we have are: acEvBoardStarted, and acEvResetingBoard. 
   The board should send these notifications to its manager 
		that the user defined in INI file with the parameter: NMPManagerIP = (IP address). 
        
Reset:
   To remote reset the board, the user should set an integer value to the parameter remoteReset.
		Then he should get the trap acEvResettingBoard. 
   Note: Before Reset, The current boardConfiguration parameters will be burned  to the board. 
		      The user should not use INI file, if he wants these parameters to take place.
        
		To set the default values, the user should set an integer value to the parameter acSetDefaults.
        		
    
Source file
AcBoard
Last revised
Identity
acBoard
Base OID
1.3.6.1.4.1.5003.9.10.1
Imported Objects
RFC1155-SMI IpAddress
SNMPv2-SMI enterprises MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC DateAndTime DisplayString TAddress TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the audiocodes MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'AcBoard' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'AcBoard::acBoard'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AcBoard' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AcBoard::acBoard'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (345)
.1.3.6.1.4.1.5003
.1.3.6.1.4.1.5003.7
.1.3.6.1.4.1.5003.8
.1.3.6.1.4.1.5003.9
.1.3.6.1.4.1.5003.9.10
.1.3.6.1.4.1.5003.9.10.1
.1.3.6.1.4.1.5003.9.10.1.1
.1.3.6.1.4.1.5003.9.10.1.1.1
pCMLawSelect obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.1.1
boardTDMBusOutputPort obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.1.10
tDMBusSpeed obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.1.11
tDMBusType obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.1.12
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.1.13
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.1.14
tDMBusClockSource obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.1.2
tDMBusEnableFallBack obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.1.3
tDMBusLocalReference obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.1.4
idlePCMPattern obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.1.5
idleABCD obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.1.6
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.1.7
tDMBusNetRefSpeed obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.1.8
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.1.9
.1.3.6.1.4.1.5003.9.10.1.1.11
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.11.1
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.11.2
.1.3.6.1.4.1.5003.9.10.1.1.11.21
acCasTablesTable obsolete
.1.3.6.1.4.1.5003.9.10.1.1.11.21.1
acCasTablesEntry obsolete
.1.3.6.1.4.1.5003.9.10.1.1.11.21.1.1
acCasTableIndex obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.11.21.1.1.1
acCasTabeName obsolete
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.11.21.1.1.2
acCptFile obsolete
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.11.3
acVpFile obsolete
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.11.4
.1.3.6.1.4.1.5003.9.10.1.1.12
acPolarityReversalType obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.12.1
.1.3.6.1.4.1.5003.9.10.1.1.13
megacoCurrentProfile obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.13.1
megacoGatewayName obsolete r/w
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.13.2
megacoEndpointName obsolete r/w
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.13.3
megacoTrunkName obsolete r/w
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.13.4
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.13.5
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.13.6
.1.3.6.1.4.1.5003.9.10.1.1.13.7
.1.3.6.1.4.1.5003.9.10.1.1.13.7.1
.1.3.6.1.4.1.5003.9.10.1.1.13.7.1.1
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.13.7.1.1.1
megacoCallAgentIp obsolete r/w
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.13.7.1.1.2
megacoCallAgentPort obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.13.7.1.1.3
megacoCallAgentIsUsed obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.13.7.1.1.4
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.13.8
.1.3.6.1.4.1.5003.9.10.1.1.14
acQ931RELAYMODE obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.14.1
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.14.2
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.14.3
.1.3.6.1.4.1.5003.9.10.1.1.2
baseUDPPort obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.2.1
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.2.10
acCPControlDiffServ obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.2.11
.1.3.6.1.4.1.5003.9.10.1.1.2.2
.1.3.6.1.4.1.5003.9.10.1.1.2.21
.1.3.6.1.4.1.5003.9.10.1.1.2.21.1
.1.3.6.1.4.1.5003.9.10.1.1.2.21.1.1
snmpManagerIndex obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.2.21.1.1.1
snmpManagerIsUsed obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.2.21.1.1.2
snmpManagerIp obsolete r/w
.1.3.6.1.4.1.5003.9.10.1.1.2.21.1.1.3
snmpManagerTrapPort obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.2.21.1.1.4
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.2.21.1.1.5
.1.3.6.1.4.1.5003.9.10.1.1.2.22
acNTPServerIPAddress obsolete r/w
.1.3.6.1.4.1.5003.9.10.1.1.2.22.1
acNTPUtcOffset deprecated r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.2.22.2
acNTPUpdateInterval deprecated r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.2.22.3
.1.3.6.1.4.1.5003.9.10.1.1.2.23
acWEBAccessTable obsolete
.1.3.6.1.4.1.5003.9.10.1.1.2.23.1
acWEBAccessEntry obsolete
.1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1
acWEBAccessRowStatus obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1.1
acWEBAccessAction obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1.2
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1.3
acWEBAccessIndex obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1.4
acWEBAccessUserName obsolete r/w
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1.5
acWEBAccessUserCode obsolete r/w
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1.6
boardIPAddr obsolete
.1.3.6.1.4.1.5003.9.10.1.1.2.3
boardSubNetAddr obsolete
.1.3.6.1.4.1.5003.9.10.1.1.2.4
acSyslogServerIP obsolete r/w
.1.3.6.1.4.1.5003.9.10.1.1.2.5
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.2.6
acSNMPManagerIP obsolete r/w
.1.3.6.1.4.1.5003.9.10.1.1.2.7
acDisableWEBConfig obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.2.8
acEnableSyslog obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.2.9
.1.3.6.1.4.1.5003.9.10.1.1.3
enableDiagnostics obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.3.1
.1.3.6.1.4.1.5003.9.10.1.1.4
.1.3.6.1.4.1.5003.9.10.1.1.4.1
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1
trunkId obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.1
lineBuildOutXPM0 obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.10
lineBuildOutXPM1 obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.11
lineBuildOutXPM2 obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.12
traceLevel obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.13
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.14
acV5LinkIdOld obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.15
acPMStatus obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.16
acLedStatusColor obsolete
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.17
acLedStatusRate obsolete
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.18
acIsdnNfasInterfaceId obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.19
clockMaster obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.2
acTrunkCasTableIndex obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.20
acTrunkAdminState obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.21
acPSTNIuaInterfaceId obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.22
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.23
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.24
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.25
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.26
acIsdnNfasGroupNumber obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.27
framingMethod obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.3
protocolType obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.4
terminationSide obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.5
dchConfig obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.6
lineCode obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.7
lineBuildOutLoss obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.8
lineBuildOutOverwrite obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.4.1.1.9
.1.3.6.1.4.1.5003.9.10.1.1.5
callAgentIP obsolete r/w
.1.3.6.1.4.1.5003.9.10.1.1.5.1
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.5.10
callAgentPort obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.5.2
callAgentDomainName obsolete r/w
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.5.3
redundantAgentIP obsolete r/w
.1.3.6.1.4.1.5003.9.10.1.1.5.4
redundantAgentPort obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.5.5
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.5.6
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.5.7
gateWayName obsolete r/w
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.5.8
endPointName obsolete r/w
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.5.9
.1.3.6.1.4.1.5003.9.10.1.1.51
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.51.1
amsAASPackagesProfile obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.51.10
amsNumOfTestTrunkPorts obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.51.2
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.51.3
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.51.4
amsApsIpAddress obsolete r/w
.1.3.6.1.4.1.5003.9.10.1.1.51.5
amsApsPort obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.51.6
amsPrimaryLanguage obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.51.7
amsSecondaryLanguage obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.51.8
amsProfile obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.51.9
.1.3.6.1.4.1.5003.9.10.1.1.6
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.6.1
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.10
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.11
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.12
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.13
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.14
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.15
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.16
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.17
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.6.18
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.19
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.6.2
acChDefaultDTMFVolume obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.6.20
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.21
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.22
acChDefaultInputGain obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.6.23
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.24
acChDefaultTestMode obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.25
acChDefaultVoiceVolume obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.6.26
acChDefaultM obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.6.27
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.6.28
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.6.29
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.3
acChDefaultRtpIpTos obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.6.30
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.6.31
acChDefaultEchoCancler obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.32
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.33
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.34
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.6.35
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.6.4
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.6.5
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.6
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.7
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.8
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.6.9
.1.3.6.1.4.1.5003.9.10.1.1.7
vPMask obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.7.1
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.7.10
pHYClkSource obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.7.11
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.7.12
masterSlaveMode obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.7.13
vccProfile obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.7.14
tPNCPVPI obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.7.15
tPNCPVCI obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.7.16
sAALLink0VPI obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.7.17
sAALLink0VCI obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.7.18
sAALLink1VPI obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.7.19
vCMask obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.7.2
sAALLink1VCI obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.7.20
externalClk obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.7.3
aTMLoopBack obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.7.4
utopiaSlave obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.7.5
multyPhy obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.7.6
slavePhyNum obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.7.7
utopiaBus16 obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.7.8
aTMPHYType obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.7.9
.1.3.6.1.4.1.5003.9.10.1.1.8
.1.3.6.1.4.1.5003.9.10.1.1.8.1
.1.3.6.1.4.1.5003.9.10.1.1.8.1.1
acSS7LinkId obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.1.8.1.1.1
acSS7traceLevel obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.1.8.1.1.2
.1.3.6.1.4.1.5003.9.10.1.1.90
acFeatureKeyString obsolete r/w
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.90.1
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.90.2
.1.3.6.1.4.1.5003.9.10.1.1.99
supplementaryField obsolete r/w
OctetString
.1.3.6.1.4.1.5003.9.10.1.1.99.1
.1.3.6.1.4.1.5003.9.10.1.2
boardType obsolete
Enumeration
.1.3.6.1.4.1.5003.9.10.1.2.1
iniFileVersion obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.2.10
acDspType obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.2.11
acFlashVersion obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.2.12
acBoardFxsOrFxo obsolete
Enumeration
.1.3.6.1.4.1.5003.9.10.1.2.13
acTrunkslCount obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.2.14
Integer32
.1.3.6.1.4.1.5003.9.10.1.2.15
Enumeration
.1.3.6.1.4.1.5003.9.10.1.2.16
acFirstPortSpeed obsolete
Enumeration
.1.3.6.1.4.1.5003.9.10.1.2.17
Integer32
.1.3.6.1.4.1.5003.9.10.1.2.18
Integer32
.1.3.6.1.4.1.5003.9.10.1.2.19
boardName obsolete
OctetString
.1.3.6.1.4.1.5003.9.10.1.2.2
acSysUpTime obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.2.20
Enumeration
.1.3.6.1.4.1.5003.9.10.1.2.21
Integer32
.1.3.6.1.4.1.5003.9.10.1.2.22
serialNum obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.2.3
dSPCount obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.2.4
channelsCount obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.2.5
cPUSpeed obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.2.6
softwareVersion obsolete
OctetString
.1.3.6.1.4.1.5003.9.10.1.2.7
OctetString
.1.3.6.1.4.1.5003.9.10.1.2.8
slotNumber obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.2.9
.1.3.6.1.4.1.5003.9.10.1.21
.1.3.6.1.4.1.5003.9.10.1.21.1
Integer32
.1.3.6.1.4.1.5003.9.10.1.21.1.1
OctetString
.1.3.6.1.4.1.5003.9.10.1.21.1.10
.1.3.6.1.4.1.5003.9.10.1.21.1.11
OctetString
.1.3.6.1.4.1.5003.9.10.1.21.1.2
OctetString
.1.3.6.1.4.1.5003.9.10.1.21.1.3
Enumeration
.1.3.6.1.4.1.5003.9.10.1.21.1.4
Integer32
.1.3.6.1.4.1.5003.9.10.1.21.1.5
Enumeration
.1.3.6.1.4.1.5003.9.10.1.21.1.6
Enumeration
.1.3.6.1.4.1.5003.9.10.1.21.1.7
OctetString
.1.3.6.1.4.1.5003.9.10.1.21.1.8
OctetString
.1.3.6.1.4.1.5003.9.10.1.21.1.9
.1.3.6.1.4.1.5003.9.10.1.21.2
.1.3.6.1.4.1.5003.9.10.1.3
.1.3.6.1.4.1.5003.9.10.1.3.2
.1.3.6.1.4.1.5003.9.10.1.3.2.1
.1.3.6.1.4.1.5003.9.10.1.3.2.1.1
cID deprecated
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.2.1.1.1
m deprecated
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.2.1.1.10
rTPRedundancyDepth deprecated
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.2.1.1.11
eCLength deprecated
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.2.1.1.12
eCHybridLoss deprecated
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.2.1.1.13
coder deprecated
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.2.1.1.2
eCE deprecated
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.2.1.1.3
sCE deprecated
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.2.1.1.4
pFE deprecated
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.2.1.1.5
hPFE deprecated
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.2.1.1.6
testMode deprecated
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.2.1.1.7
voiceVolume deprecated
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.2.1.1.8
inputGain deprecated
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.2.1.1.9
.1.3.6.1.4.1.5003.9.10.1.3.3
.1.3.6.1.4.1.5003.9.10.1.3.3.1
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1
fAXTransportType obsolete
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1.1
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1.10
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1.11
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1.12
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1.13
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1.14
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1.15
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1.16
faxModemBypassM obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1.17
useT38orFRF11 obsolete
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1.18
acCallerIDType obsolete
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1.2
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1.3
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1.4
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1.5
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1.6
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1.7
faxRelayMaxRate obsolete
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1.8
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.3.1.1.9
.1.3.6.1.4.1.5003.9.10.1.3.4
dJBSettingsTable obsolete
.1.3.6.1.4.1.5003.9.10.1.3.4.1
dJBSettingsEntry obsolete
.1.3.6.1.4.1.5003.9.10.1.3.4.1.1
dJBufMinDelay obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.4.1.1.1
dJBufOptFactor obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.4.1.1.2
.1.3.6.1.4.1.5003.9.10.1.3.5
.1.3.6.1.4.1.5003.9.10.1.3.5.1
.1.3.6.1.4.1.5003.9.10.1.3.5.1.1
tDMBusInputPort obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.5.1.1.1
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.5.1.1.2
Enumeration
.1.3.6.1.4.1.5003.9.10.1.3.5.1.1.3
tDMBusOutputPort obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.5.1.1.4
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.5.1.1.5
.1.3.6.1.4.1.5003.9.10.1.3.6
.1.3.6.1.4.1.5003.9.10.1.3.6.1
.1.3.6.1.4.1.5003.9.10.1.3.6.1.1
useNIorPCI obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.6.1.1.1
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.6.1.1.2
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.6.1.1.3
.1.3.6.1.4.1.5003.9.10.1.3.7
.1.3.6.1.4.1.5003.9.10.1.3.7.1
.1.3.6.1.4.1.5003.9.10.1.3.7.1.1
cNAME obsolete
OctetString
.1.3.6.1.4.1.5003.9.10.1.3.7.1.1.1
rxRTPPayloadType obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.7.1.1.10
txRTPPayloadType obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.7.1.1.11
iPPrecedence obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.7.1.1.2
iPTOS obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.7.1.1.3
localRTPPort obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.7.1.1.4
remoteRTPAddr obsolete
.1.3.6.1.4.1.5003.9.10.1.3.7.1.1.5
remoteRTPPort obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.7.1.1.6
remoteT38Addr obsolete
.1.3.6.1.4.1.5003.9.10.1.3.7.1.1.7
remoteT38Port obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.7.1.1.8
Integer32
.1.3.6.1.4.1.5003.9.10.1.3.7.1.1.9
.1.3.6.1.4.1.5003.9.10.1.4
.1.3.6.1.4.1.5003.9.10.1.4.1
.1.3.6.1.4.1.5003.9.10.1.4.1.1
rTPActive deprecated
Enumeration
.1.3.6.1.4.1.5003.9.10.1.4.1.1.1
packetsToDSPCnt deprecated
Integer32
.1.3.6.1.4.1.5003.9.10.1.4.1.1.10
Integer32
.1.3.6.1.4.1.5003.9.10.1.4.1.1.11
Integer32
.1.3.6.1.4.1.5003.9.10.1.4.1.1.12
Integer32
.1.3.6.1.4.1.5003.9.10.1.4.1.1.13
Integer32
.1.3.6.1.4.1.5003.9.10.1.4.1.1.14
jitterBufOverRunCnt deprecated
Integer32
.1.3.6.1.4.1.5003.9.10.1.4.1.1.15
Integer32
.1.3.6.1.4.1.5003.9.10.1.4.1.1.16
fXSorFXO deprecated
Enumeration
.1.3.6.1.4.1.5003.9.10.1.4.1.1.17
channelHookState deprecated
Enumeration
.1.3.6.1.4.1.5003.9.10.1.4.1.1.18
bypassNIC deprecated
Integer32
.1.3.6.1.4.1.5003.9.10.1.4.1.1.2
pendingIdle obsolete
Integer32
.1.3.6.1.4.1.5003.9.10.1.4.1.1.3
txSilencePeriod deprecated
Integer32
.1.3.6.1.4.1.5003.9.10.1.4.1.1.4
rxSilencePeriod deprecated
Integer32
.1.3.6.1.4.1.5003.9.10.1.4.1.1.5
txFaxMode deprecated
Integer32
.1.3.6.1.4.1.5003.9.10.1.4.1.1.6
rxFaxMode deprecated
Integer32
.1.3.6.1.4.1.5003.9.10.1.4.1.1.7
txDTMFPeriod deprecated
Integer32
.1.3.6.1.4.1.5003.9.10.1.4.1.1.8
rxDTMFPeriod deprecated
Integer32
.1.3.6.1.4.1.5003.9.10.1.4.1.1.9
.1.3.6.1.4.1.5003.9.10.1.5
.1.3.6.1.4.1.5003.9.10.1.6
remoteReset obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.6.1
acSetDefaults obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.6.2
acgwAdminState obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.6.3
Integer32
.1.3.6.1.4.1.5003.9.10.1.6.4
acSaveConfigToSystem obsolete r/w
Integer32
.1.3.6.1.4.1.5003.9.10.1.6.5
Enumeration
.1.3.6.1.4.1.5003.9.10.1.6.6
remoteResetControl obsolete r/w
Enumeration
.1.3.6.1.4.1.5003.9.10.1.6.7
Dependencies (3) 3 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. RFC1155-SMIrfc
  2. SNMPv2-SMIrfc
  3. SNMPv2-TCrfc
  4. AcBoardaudiocodesselected
Notifications / Traps (78)
NameOIDDescription
.1.3.6.1.4.1.5003.9.10.1.21.2.0.1
Board fatal error
.1.3.6.1.4.1.5003.9.10.1.21.2.0.10
Ethernet Link is down or remote Ethernet link is down and board has no communication to any other host
.1.3.6.1.4.1.5003.9.10.1.21.2.0.11
Overload in one or some of the system's components
.1.3.6.1.4.1.5003.9.10.1.21.2.0.12
An active alarm could not be placed in the active alarm table because the table is full.
This alarm will not clear. Reboot is the only way to completely clear the Active Alarm table overflow problem.
Any alarm raised at this state will not be Carrier Grade compatible. Therefore, Updates will not clear the alarm
before changing the bindings and re-raising alarms. The History tables remain unaffected.
All Alarms raised prior to overflow will remain Carrier Grade compatible.
Other alarms, raised after this alarm was raised, that are placed in the Active Alarm table will be Carrier Grade
compatible. (This is for when after the alarm was raised there were some clears, clearing alarms off the Active Alarm table).
.1.3.6.1.4.1.5003.9.10.1.21.2.0.13
ATM Port Alarm
.1.3.6.1.4.1.5003.9.10.1.21.2.0.14
This alarm is raised if the Media Server is unable to provision its audio. This could be because the Audio Provisioning System (APS) is down or there is a network problem.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.15
This alarm is raised if the operational state of the node goes to disabled. The alarm is cleared when the operational state of the node goes to enabled.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.16
This trap is the NAT Traversal keep alive trap.
If the STUN application in the device detects a NAT then this trap will be sent out on a regular time laps - 9/10 of the acSysSTUNBindingLifeTime object. The AdditionalInfo1 varbind has the MAC address of the device.
Note that all traps are sent out from the SNMP Port (usually 161).
.1.3.6.1.4.1.5003.9.10.1.21.2.0.17
When the NAT placed in front a device is identified as a symmetric NAT - this alarm is raised. It is cleared when a non-symmetric NAT or no NAT replace the symmetric one.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.18
This trap is used to for the status of the BIT (Built In Test).
The information in the trap contains board HW elements being tested and their status.
The information is presented in the additional info fields.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.19
This alarm is raised if the operational state of the SS7 link becomes XXXX. The alarm is cleared when the operational state of the link becomes XXXX.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.2
Configuration Error
.1.3.6.1.4.1.5003.9.10.1.21.2.0.20
This alarm is raised if the SS7 link becomes inhibited (local or remote). The alarm is cleared when the link becomes uninhibited - local AND remote. Note that this alarm will be raised for any change in the remote or local inhibition status.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.21
This alarm is raised if the SS7 link becomes blocked (local or remote). The alarm is cleared when the link becomes unblocked - local AND remote. Note that this alarm will be raised for any change in the remote or local blocking status.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.22
This alarm is raised if the SS7 link becomes congested (local or remote). The alarm is cleared when the link becomes uncongested - local AND remote. Note that this alarm will be raised for any change in the remote or local congestion status.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.23
This alarm is raised if the operational state of the SS7 linkset becomes BUSY. The alarm is cleared when the operational state of the linkset becomes IN-SERVICE or OFFLINE.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.24
This alarm is raised if the operational state of the SS7 routeset becomes BUSY. The alarm is cleared when the operational state of the routeset becomes IN-SERVICE or OFFLINE.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.25
This alarm is raised if the operational state of the SS7 node becomes BUSY. The alarm is cleared when the operational state of the node becomes IN-SERVICE or OFFLINE.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.26
Raised when the SS7 redundancy degregated. Cleared when all entities of redundancy are fully functional and in serveice.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.27
This log trap is sent out for every time the threshold
of a Performance Monitored object is crossed.
The severity field is 'indeterminate' when the crossing is above the threshold
and 'cleared' when it goes back under the threshold.
The 'source' varbind in the trap indicates the object
for which the threshold is being crossed.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.28
This trap indicates the result of a recent file download (includes HTTP error code, if available).
.1.3.6.1.4.1.5003.9.10.1.21.2.0.29
This alarm is raised when the fan tray is missing or some of the fans are faulty.
If the fan tray is missing or more then X fans are faulty the severity will be Critical.
If more then one and less the X fans are faulty the severity will be Major.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.3
Temperature Alarm. Turned on when temperature exceeds 60 degrees Celsius, and relaxes when temperature goes under 55 again.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.30
This alarm is raised when the HA (High Availability) feature is active and one of the power supply units is faulty.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.31
This alarm is raised when the HA (High Availability) feature is active. The severity is critical if one of the PEM units is missing and major if the electric wire to one of the units is disconnected.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.32
This alarm is raised when the SA module in the M3K MG is missing. Whenthere is no SAT there are no other chassis HW related alarms.
Note - relevant only for M3K.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.33
This alarm is raised when the HA (High Availability) feature is active and the system is NOT HA.
Critical severity -
1.Wrong HW Configuration.
2. Redundant module is missing (not in slot).
3. The redundant module is non operable.
Minor severity - waiting for redunadant to connect (after reset!).
.1.3.6.1.4.1.5003.9.10.1.21.2.0.34
This alarm is raised when the HA (High Availability) feature is active and there has been a configuration change due to which the HA system may or may not be usable.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.35
This alarm is raised when the HA (High Availability) feature is active and there has been a switchover due to failure or reset in the active module.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.36
This Alarm is raised when the input dry contact is short circuited. Cleared when the circuit is reopened.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.37
This non alarm trap is sent when establishment, re-establishment or release of LAPD link with its peer connection occurs.
The trap will be sent out with one of the following in the textual description:
D-channel synchronized
D-channel not-synchronized
.1.3.6.1.4.1.5003.9.10.1.21.2.0.38
SONET section Loss of Frame alarm.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.39
SONET section Loss of Signal alarm.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.4
Initialization Ended
.1.3.6.1.4.1.5003.9.10.1.21.2.0.40
SONET Line AIS alarm.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.41
SONET Line RDI alarm.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.42
SONET or SDH medium Interface has failed.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.43
HW failure alarm.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.44
H248 lost connection with call agent
.1.3.6.1.4.1.5003.9.10.1.21.2.0.45
dial plan file replaced notification
.1.3.6.1.4.1.5003.9.10.1.21.2.0.46
Analog port out of service
.1.3.6.1.4.1.5003.9.10.1.21.2.0.47
Analog Port High Temperature
.1.3.6.1.4.1.5003.9.10.1.21.2.0.48
Notification trap that is sent out at the beginning and the end of a Hitless SW update.
Failure during the process will also instigate the trap.
Relevant to HA systems only.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.49
Loss of signal at trunk's near end.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.5
The board start Reset process - following software reset
.1.3.6.1.4.1.5003.9.10.1.21.2.0.50
Loss of frame at trunk's near end.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.51
Received AIS from trunk's far end.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.52
Loss of frame at trunk's far end.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.53
Alarm trap that is sent out for IPv6 related errors.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.54
AMS procedure related information
.1.3.6.1.4.1.5003.9.10.1.21.2.0.55
The system is in weak redundancy mode. Switch over is done with a reset to the board taking over.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.56
Inconsistent Remote And Local PLL Status
.1.3.6.1.4.1.5003.9.10.1.21.2.0.57
Timing manager reference status
.1.3.6.1.4.1.5003.9.10.1.21.2.0.58
Timing manager reference Change
.1.3.6.1.4.1.5003.9.10.1.21.2.0.59
The alarm is raised when SAS enters the Emergency Mode and then cleared when SAS enters Normal Mode again.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.6
Feature key related Error
.1.3.6.1.4.1.5003.9.10.1.21.2.0.60
The alarm is raised for v5.2 interface errors and alarms.{@}For a detailed list of the interfaces' alarms see the acV5InterfceTable.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.61
Sonet Path STS LOP alarm.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.62
Sonet Path STS AIS alarm.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.63
Sonet Path STS RDI alarm.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.64
Sonet Path Unequipped alarm.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.65
Sonet Path Signal Label Mismatch alarm.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.66
DS3 RAI alarm.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.67
DS3 AIS alarm.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.68
DS3 LOF alarm.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.69
DS3 LOS alarm.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.7
The administrative state of the gate way has been changed to a new state.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.70
Raised for SW upgrade process errors.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.71
NTP server status alarm. {@}Raised when the connection to the NTP server is lost. Cleared when the connection is reestablished. {@}Unset time (as a result of no connection to NTP server) may result with functionality degradation and failure in device.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.72
Three way conference out of resources.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.73
raised when the Alias PC is in BUSY state. Cleared when it is in In-Service state.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.74
Raised when the Ual Group Asp state is not ACTIVE. Cleared when it is Active.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.75
Raised when there is no connection to the LDAP server.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.76
Raised when the MP500 FXS port is inactive due to ground fault.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.77
This trap indicates the result of a recent SSH connection attempt.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.78
raised when OCSP connection is not available.
.1.3.6.1.4.1.5003.9.10.1.21.2.0.8
No free channels available
.1.3.6.1.4.1.5003.9.10.1.21.2.0.9
The GK/Proxy not found or registration failed. internal routing table may be used for routing