AVAYA-LOAD-MIB Table View

Table of configuration attributes which define the operational 
functions and the results on a per module basis.  This group provides
the mechanism by which available operations are initiated, monitored 
and reported.

avGenOpEntry row .1.3.6.1.4.1.6889.2.6.5.1.2.1

An entry in the table, containing data about a single modules
operations.

Indexes

avGenOpModuleId avGenOpIndex

Column	Syntax	OID
avGenOpModuleId Index which identifies the module inside the chassis for which this entry contains information. Equals the number of the slot by which the group is accessed or the stackable index. Announcements file will be presented i…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.6889.2.6.5.1.2.1.1
avGenOpIndex Index to identify the operation supported by this row entry. Each operation type that is supported by this module should be represented by a unique row in this MIB Table. A walk of this MIB table should reveal all t…	Enumeration Enumerated Values: 1 uploadConfig 2 downloadConfig 3 report 4 uploadSoftware 5 downloadSoftware 6 localConfigFileCopy 7 localSWFileCopy 8 uploadLogfile 9 eraseFile 10 show 11 syncStandbyAgent 12 downloadAuthFile 13 downloadLicFile 14 downloadPhoneScriptFile 15 uploadPhoneScriptFile 16 downloadPhoneImageFile 17 uploadDhcpBindingFile 18 uploadAnnouncements 19 downloadAnnouncements 20 renameAnnouncement 21 eraseAnnouncement 22 uploadAuthFile 23 uploadLicFile 24 uploadSyslogFile 25 uploadCDRFile 28 backupConfig 29 restore 30 commit 31 uploadServicePack 32 downloadServicePack 33 localServicePackFileCopy 34 backup 35 generateFile 36 downloadCertificate 37 uploadCertificate 38 switchPartitions 39 uploadPhoneImageFile 40 downloadVoiceMailFile 41 uploadVoiceMailFile 42 downloadPhoneMessageFile 43 uploadPhoneMessageFile 44 downloadConfigurationWizardTaskFile 45 uploadConfigurationWizardTaskFile 46 localSWFileMove 47 localVoiceMailFileMove 48 reset	.1.3.6.1.4.1.6889.2.6.5.1.2.1.2
avGenOpRunningState Identifies the operation to perform and the state of that operation. This field acts as both the trigger to initiate the operation (via the beginOperation) and the status field of the operation itself (i.e. waiting-ip,…	Enumerationr/w Enumerated Values: 1 idle 2 beginOperation 3 waitingIp 4 runningIp 5 copyingLocal 6 readingConfiguration 7 executing 8 blocked 9 reset	.1.3.6.1.4.1.6889.2.6.5.1.2.1.3
avGenOpSourceIndex The index value (taken from the avGenAppFileTable) of the source of the operation. NOTE: A value of zero (0) here indicates that the Server (specified below) is the source.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.6.5.1.2.1.4
avGenOpDestIndex The index value (taken from the avGenAppFileTable) of the destination of the operation. NOTE: A value of zero (0) here indicates that the Server (specified below) is the Destination.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.6.5.1.2.1.5
avGenOpServerIP The IP Address of the server from/to which the file has to be Download/Upload. NOTE: In the case of localPeerTransport this value should be NULL. Please note that avGenOpServerIP is used for IPv4 address…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6889.2.6.5.1.2.1.6
avGenOpUserName Contains the username to be used if the protocol specified in avGenOpProtocolType requires one. The default value will be the empty string	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.6889.2.6.5.1.2.1.7
avGenOpPassword Contains the password to be used if the protocol specified in avGenOpProtocolType requires one. The default value will be the empty string	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.6889.2.6.5.1.2.1.8
avGenOpProtocolType Identifies the protocol between the management station and the device for Download/Upload of the file.	Enumerationr/w Enumerated Values: 1 tftp 2 ftp 3 localPeerTransport 4 localServerTransport 5 scp 6 sftp 7 usb 8 http 9 https 10 ftpResume	.1.3.6.1.4.1.6889.2.6.5.1.2.1.9
avGenOpFileName The location (including the FULL path) of the file in the server. NOTE: In the case of localPeerTransport this value should be NULL. In case of genOpProtocolType==usb(7) the file name shall include the p…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6889.2.6.5.1.2.1.10
avGenOpRunningStateDisplay The state of the operation for Display on the terminal during operation process.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.6889.2.6.5.1.2.1.11
avGenOpLastFailureIndex While a download is in progress this will always be 'no-error'. After a download is complete this indicates the success or failure of the download. If it is anything other than 'no-error' then 'avGenOpLastFailureDis…	Enumeration Enumerated Values: 1 noError 2 genError 3 configError 4 busy 5 timeout 6 cancelled 7 incompatibleFile 8 fileTooBig 9 protocolError 10 flashWriteError 11 nvramWriteError 12 confFileGenErr 13 confFileParseError 14 confFileExecError 15 readOnlyFile 16 emptyFile 17 noEnoughFreeMemoryLeft 100 undefinedError 101 fileNotFound 102 accessViolation 103 outOfMemory 104 illegalOperation 105 unknownTransferId 106 fileAlreadyExists 107 noSuchUser 108 sshServerAuth 109 sshDeviceAuth 201 badChainOfTrust 202 badChainOfTrustFormat 203 notCodeSigningAuthority 204 illegalDSA 205 badPublicKeyFormat 206 illegalDSKeySize 207 badDSFormat 208 authDSFailure 210 configFileSecretIntegrityFault 220 ftpResumeBadFilename 221 ftpResumeEmptyFile 222 ftpResumeNotSupported	.1.3.6.1.4.1.6889.2.6.5.1.2.1.12
avGenOpLastFailureDisplay Contains the last error, Null if there is no error.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.6889.2.6.5.1.2.1.13
avGenOpLastWarningDisplay Last warning which didn't stop the operation (not fatal error).	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.6889.2.6.5.1.2.1.14
avGenOpErrorLogIndex The Index in the 'avGenAppFileTable' under which an error log has been created. In the case of file that produce errors this file should contain a log of errors that occurred. (This item should be zero if it does not e…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.6.5.1.2.1.15
avGenOpResetSupported Indicates if a reset (after operation completion) is supported by this Module.	Enumeration Enumerated Values: 1 supported 2 notSupported	.1.3.6.1.4.1.6889.2.6.5.1.2.1.16
avGenOpEnableReset Whether to do a reset after the operation completed successfully.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6889.2.6.5.1.2.1.17
avGenOpNextBootImageIndex The row in the 'avGenAppFileTable' of the default Application that the device will boot from when a standard reboot is performed.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.6.5.1.2.1.18
avGenOpLastBootImageIndex The Index in the 'avGenAppFileTable' of the default Application that the device was last booted from.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.6.5.1.2.1.19
avGenOpFileSystemType Indicates what type of file system is supported by this module. A value of 'static' indicates that rows in the 'avGenAppFileTable' are not removable nor can new entries be created. A value of 'dynamic' …	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.6889.2.6.5.1.2.1.20
avGenOpReportSpecificFlags Contain modifiers to the Report operation. fullReport - Full configuration report partialReport - A report without the information stored in the OSPF database notSupported - For ope…	Enumerationr/w Enumerated Values: 1 fullReport 2 partialReport 255 notSupported	.1.3.6.1.4.1.6889.2.6.5.1.2.1.21
avGenOpOctetsReceived While a download is in progress this indicates the number of bytes transferred so far.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.6.5.1.2.1.22
avGenOpDownloadProxy The avGenOpDownloadProxy is the location of a CLAN board that will serve as the proxy for the firmware download of a TDM-based board, since these boards are unable to perform the download operation themselves. The CLA…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.6.5.1.2.1.23
avGenOpServerInetAddressType The address type of avGenOpServerInetAddress.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6889.2.6.5.1.2.1.24
avGenOpServerInetAddress The Inet Address of the remote file server. 1. The address type of this object is specified in avGenOpServerInetAddress. 2. Management applications can use avGenOpServerIP or avGenOpServerInetAddressType/avGenOpServ…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.6889.2.6.5.1.2.1.25

Table of Application (FILE) entries.  Each row uniquely defines
an application in the system.  Applications can be defined as
any entity that can be read or written from or to the system.
This includes software images, boot code, configuration files,
prom code, etc.

avGenAppFileEntry row .1.3.6.1.4.1.6889.2.6.5.2.1.1

An entry in the table, containing data about a single application
/ config file.

Indexes

avGenOpModuleId avGenAppFileId

Column	Syntax	OID
avGenAppFileId Index which uniquely identifies the application. NOTE: This index CANNOT BE ZERO (0) since the index of zero is reserved as an indication of network server location in the avGenOpSourceIndex and avGenOpDestIndex above.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.6889.2.6.5.2.1.1.1
avGenAppFileName The name of the application.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.6889.2.6.5.2.1.1.2
avGenAppFileType The type (class) of the application. This class serves to catagorize the many application files in the system into some fixed types: runningConfiguration -- This entry represents a virtual file in …	Enumerationr/w Enumerated Values: 1 runningConfiguration 2 startupConfiguration 3 defaultConfiguration 4 report 5 genConfigFile 6 logFile 7 nvramFile 8 swRuntimeImage 9 swBootImage 10 swComponent 11 other 12 swWebImage 13 swAPImage 14 swNonDownLoadRunTimeImage 15 asgAuthFile 16 licenseFile 17 phoneScriptFile 18 phoneImageFile 19 dhcpBindingFile 20 announcementFile 21 backupDatabase 22 syslogFile 23 cdrFile 24 swRuntimeServicePack 25 swComponentServicePack 26 trustedCertificate 27 certificateRequest 28 serverCertificate 29 privateKey 30 staticLanguagePack 31 phoneAvayaUnicodeMessageFile 32 phoneCustomUnicodeMessageFile 33 startupConfigurationWizardTaskFile 34 genConfigurationWizardTaskFile	.1.3.6.1.4.1.6889.2.6.5.2.1.1.3
avGenAppFileDescription A description of the application.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.6889.2.6.5.2.1.1.4
avGenAppFileSize The size (expressed as the number of bytes) of the application.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.6.5.2.1.1.5
avGenAppFileVersionNumber The current version of the application. If this file does not carry a version this field should be NULL. An example is a string of '24.6.0' for G350 software version.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6889.2.6.5.2.1.1.6
avGenAppFileLocation The physical location of the application.	Enumerationr/w Enumerated Values: 1 ram 2 flashBankA 3 flashBankB 4 nvram 5 bootProm 6 compactFlash 7 flash	.1.3.6.1.4.1.6889.2.6.5.2.1.1.7
avGenAppFileDateStamp The time stamp is the Real Time if supported otherwise sysUpTime. The convention for this field is as follows: Real Time: Entry is prefixed with an 'R' character and time is formatted using the convent…	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.6889.2.6.5.2.1.1.8
avGenAppFileRowStatus The status of this entry in the table. Note the available states: active(1), -- Fully configured and active. notInService(2) -- NOT SUPPORTED. notReady(3), -- Entry NOT FULLY configured. createAndGo(4), -- Used to add …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.6.5.2.1.1.9
avGenAppFilePortNetwork The avGenAppFilePortNetwork is the Port Network that a downloadable TN board is location in. This is useful to the customer in determining the Download Proxy, since location is a factor in determining whether a downloa…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.6.5.2.1.1.10
avGenAppFileDuplStatus The avGenAppFileDuplStatus is the duplication state of the various TN boards that can be duplicated. These include the IPSI and Crossfire boards. This is also useful to the customer in order for them to determine whethe…	Enumeration Enumerated Values: 1 active 2 standby 3 not-administered	.1.3.6.1.4.1.6889.2.6.5.2.1.1.11
avGenAppFileCompatibleVersionNumber The compatability version relevant to other files on the system. If the value is not needed then this field should be NULL. An example is a string of '18.1'.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6889.2.6.5.2.1.1.12

Table of different application types and their memory allocation in the RAM and NvRAM.

avLoadApplMemEntry row .1.3.6.1.4.1.6889.2.6.5.5.1

An entry in the table, containing data about application and its memory type.

Indexes

avLoadApplMemModuleId avLoadApplMemLocation avLoadApplMemType

Column	Syntax	OID
avLoadApplMemModuleId The module ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.6.5.5.1.1
avLoadApplMemLocation The Type of the memory that the the file is stored.	Enumeration Enumerated Values: 1 ram 2 flashBankA 3 flashBankB 4 nvram 5 bootProm	.1.3.6.1.4.1.6889.2.6.5.5.1.2
avLoadApplMemType The type of the application file.	Enumeration Enumerated Values: 20 announcementFile	.1.3.6.1.4.1.6889.2.6.5.5.1.3
avLoadApplMemSize The size of the Memory in Bytes for specific application and memory type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.6.5.5.1.4
avLoadApplMemTotalBytesUsed Total Bytes used for the specific module/memory type and file type.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.6.5.5.1.5
avLoadApplMemTotalBytesFree Total Bytes free for the specific module/memory type and file type.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.6.5.5.1.6

Table of dynamic applications.
This MIB table can be used to show files on external USB mass storage device.

avLoadAppDynamicFileEntry row .1.3.6.1.4.1.6889.2.6.5.6.1

An entry in the table, containing data about the application.

Indexes

avLoadAppDynamicFileName

Column	Syntax	OID
avLoadAppDynamicFileName The filename including file system, path and filename. An example: /usbdevice0/backup1/imageA.bin where /usbdevice0/ is the file system of external usb mass storage device. /backup1/ is directory and imageA.bin is the…	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.6889.2.6.5.6.1.1
avLoadAppDynamicFileType Type of the entry (file or directory).	Enumeration Enumerated Values: 1 file 2 directory	.1.3.6.1.4.1.6889.2.6.5.6.1.2
avLoadAppDynamicFileSize The size (expressed as the number of bytes) of the file.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.6.5.6.1.3
avLoadAppDynamicFileDateStamp Time stamp of the file. Refer to avGenAppFileDateStamp syntax description.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.6889.2.6.5.6.1.4
avLoadAppDynamicFileRowStatus The status of this entry in the table. Note the available states: active(1), -- Fully configured and active. notInService(2) -- NOT SUPPORTED. notReady(3), -- Entry NOT FULLY configured. NOT SUPPORTED. createAndGo(4), …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.6.5.6.1.5