AVAYA-ENTITY-MIB Table View

This table extends entPhySensorTable with thresholds on the sensors.

avEntPhySensorEntry row .1.3.6.1.4.1.6889.2.1.99.1.1

Thresholds for sensors described in entPhySensorTable.
The Threshold values correspond to entPhySensorValue.

Entries are created in this table by the agent. An entry
for each physical sensor SHOULD be cre…

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
avEntPhySensorHiShutdown The system shuts down when the sensor reading reaches this value	ENTITY-SENSOR-MIBEntitySensorValue Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.6889.2.1.99.1.1.1
avEntPhySensorHiWarning The system generates a warning event when the sensor reading rises and crosses this value	ENTITY-SENSOR-MIBEntitySensorValue Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.6889.2.1.99.1.1.2
avEntPhySensorHiWarningClear The system generates a warning-clear event when the sensor reading falls and crosses below this value	ENTITY-SENSOR-MIBEntitySensorValue Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.6889.2.1.99.1.1.3
avEntPhySensorLoWarningClear The system generates a warning-clear event when the sensor reading rises and crosses this value	ENTITY-SENSOR-MIBEntitySensorValue Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.6889.2.1.99.1.1.4
avEntPhySensorLoWarning The system generates a warning event when the sensor reading falls and crosses this value	ENTITY-SENSOR-MIBEntitySensorValue Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.6889.2.1.99.1.1.5
avEntPhySensorLoShutdown The system shuts down if the sensor reaches this value	ENTITY-SENSOR-MIBEntitySensorValue Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.6889.2.1.99.1.1.6
avEntPhySensorEventSupportMask A trap and an event is generated upon threshold crossing if the correspond bit is set. Note that there may be other trap filtering mechanisms. 0/0: hiShutdown(0) 0/1: hiWarning(1) 0/2: hiWarningClear(2…	OctetString	.1.3.6.1.4.1.6889.2.1.99.1.1.7

This table extends entPhysicalTable with USB devices parameters.

avEntPhyUSBDevicesEntry row .1.3.6.1.4.1.6889.2.1.99.3.1.1

This table includes extension to entPhysicalTable with usb devices
parameters.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
avEntPhyUSBDeviceUSBSupportVersion The USB standard version. Possible values are: 1.1 and 2.0.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.6889.2.1.99.3.1.1.1
avEntPhyUSBDeviceClassCode The usb device class code. Value Hex Value Descriptor 1 1 Audio 2 2 CDC-Control 3 3 HID 5 5 Physical 6 6 Image (subclass & protocol must be 1) 7 7 …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.99.3.1.1.2
avEntPhyUSBDeviceSubClassCode The usb device subclass code. USB standard describe the following class codes: 0x01 - RBC (Reduced Block Commands) 0x02 - SFF-8020i, MMC-2 (ATAPI) 0x03 - QIC-157 0x04 - UFI 0x05 - SFF-8070i 0x06 - SCSI …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.99.3.1.1.3
avEntPhyUSBDeviceProtocol The usb device protocol code. 0x0 - Control/Bulk/Interrupt protocol (with command completion Interrupt). 0x1 - Control/Bulk/Interrupt protocol (with no command completion Interrupt). 0x5…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.99.3.1.1.4
avEntPhyUSBDeviceVendorId The USB device vendor HEX-formatted string as it is provided to the USB host by the USB device	OctetString	.1.3.6.1.4.1.6889.2.1.99.3.1.1.5
avEntPhyUSBDeviceSpeed The USB device speed. Possible values: 'Low', 'Full' and 'High'. G250/G350 supports 'Full' and 'High'	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.6889.2.1.99.3.1.1.6
avEntPhyUSBDevicePower The USB device power. Possible values: 'Unknown', 'Self Powered' and 'Bus Powered'.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.6889.2.1.99.3.1.1.7
avEntPhyUSBDeviceCurrent The USB current consumption in mA.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.99.3.1.1.8

This table extends entPhysicalTable with USB mass storage devices parameters.

avEntPhyUSBMassStorageDevicesEntry row .1.3.6.1.4.1.6889.2.1.99.3.2.1

This table includes extension to entPhysicalTable with usb mass storage
devices parameters.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
avEntPhyUSBMassStorageDeviceFileSystemName The usb mass storage device File system name. An exmaple for one usb mass storage device on the gateway is mapped to /usbdevice0/.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.6889.2.1.99.3.2.1.1
avEntPhyUSBMassStorageDeviceCapacity Capacity of USB Mass storage device in KBytes.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.99.3.2.1.2
avEntPhyUSBMassStorageDeviceFreeMemory Free memory of USB Mass storage device in KB. For R/O USB mass storage devices (as CDROM) this value returns 0. Note that this MIB item shall be updated according backup operations that may consume memory space.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.99.3.2.1.3
avEntPhyUSBMassStorageDeviceFs The file system supported by the USB device. Possible values: 'FAT16' and 'FAT32'.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.6889.2.1.99.3.2.1.4

Table depicting the status of chassis FRU units such as Power-Supplies and Fan-Tray

avEntPhyChFruEntry row .1.3.6.1.4.1.6889.2.1.99.5.1.1

Table entry depicting the status of chassis FRU units such as Power-Supplies and Fan-Tray

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
avEntPhyChFruOperStat Operational status of the chassis FRU unit.	Enumeration Enumerated Values: 1 ok 2 fault 3 notPresent 255 unknown	.1.3.6.1.4.1.6889.2.1.99.5.1.1.1
avEntPhyChFruFault Description of fault, in case an FRU has failed	Enumeration Enumerated Values: 1 none 2 mulfunction 3 acFault 4 malfunctionAndAcFault 5 singleFanFault 6 multipleFanFault 7 badExpansionCable 255 unknown	.1.3.6.1.4.1.6889.2.1.99.5.1.1.2