that an AIS alarm condition has occurred
on the physical path TP associated with the specified
interface.
atmfM4IfSignalLabelMismatchAlarm
.1.3.6.1.4.1.353.100.2.10
that a signal label mismatch has occurred
on the physical path TP associated with the specified
interface.
atmfM4IfLcdAlarm
.1.3.6.1.4.1.353.100.2.2
that an LCD (Loss of Cell Delineation)
condition has occurred on the TC Adatpr associated
with the specified interface.
atmfM4HwLineCardAlarm
.1.3.6.1.4.1.353.100.2.23
that a line-card problem condition
has occurred on the hardware unit associated
with the specified index.
A hardware index of 0 indicates that the error
occurred in the ATM NE but not in any one hardware
unit maintained in the MIB table.
atmfM4HwPowerAlarm
.1.3.6.1.4.1.353.100.2.25
that a power problem alarm condition
has occurred on the hardware unit associated
with the specified index.
A hardware index of 0 indicates that the error
occurred in the ATM NE but not in any one hardware
unit maintained in the MIB table.
atmfM4HwPIUnitMissingAlarm
.1.3.6.1.4.1.353.100.2.29
that a plug-in unit missing condition
has occurred on the hardware unit associated
with the specified index.
A hardware index of 0 indicates that the error
occurred in the ATM NE but not in any one hardware
unit maintained in the MIB table.
atmfM4IfLofAlarm
.1.3.6.1.4.1.353.100.2.3
that an LOF (Loss of Frame)
condition has occurred on the physical path TP associated
with the specified interface.
atmfM4HwPIUnitProbAlarm
.1.3.6.1.4.1.353.100.2.30
that a plug-in unit problem condition
has occurred on the hardware unit associated
with the specified index.
A hardware index of 0 indicates that the error
occurred in the ATM NE but not in any one hardware
unit maintained in the MIB table.
atmfM4HwPIUnitMismatchAlarm
.1.3.6.1.4.1.353.100.2.31
that a plug-in unit type mismatch condition
has occurred on the hardware unit associated
with the specified index.
A hardware index of 0 indicates that the error
occurred in the ATM NE but not in any one hardware
unit maintained in the MIB table.
atmfM4HwTimingProbAlarm
.1.3.6.1.4.1.353.100.2.32
that a timing problem alarm condition
has occurred on the hardware unit associated
with the specified index.
A hardware index of 0 indicates that the error
occurred in the ATM NE but not in any one hardware
unit maintained in the MIB table.
atmfM4HwSwDownloadFailAlarm
.1.3.6.1.4.1.353.100.2.39
that a software download failure
has occurred on the hardware unit associated
with the specified index.
A hardware index of 0 indicates that the error
occurred in the ATM NE but not in any one hardware
unit maintained in the MIB table.
atmfM4IfLopAlarm
.1.3.6.1.4.1.353.100.2.4
that an LOP (Loss of Pointer)
condition has occurred on the physical path TP associated
with the specified interface.
atmfM4HwVersionMismatchAlarm
.1.3.6.1.4.1.353.100.2.40
that a version mismatch condition
has occurred on the hardware unit associated
with the specified index.
A hardware index of 0 indicates that the error
occurred in the ATM NE but not in any one hardware
unit maintained in the MIB table.
atmfM4HwFanFailAlarm
.1.3.6.1.4.1.353.100.2.41
that a cooling fan failure condition
has occurred on the hardware unit associated
with the specified index.
A hardware index of 0 indicates that the error
occurred in the ATM NE but not in any one hardware
unit maintained in the MIB table.
atmfM4HwHighTempAlarm
.1.3.6.1.4.1.353.100.2.44
that a high temperature condition
has occurred on the hardware unit associated
with the specified index.
A hardware index of 0 indicates that the error
occurred in the ATM NE but not in any one hardware
unit maintained in the MIB table.
atmfM4SwVersionMismatchAlarm
.1.3.6.1.4.1.353.100.2.45
that a version mismatch condition
has occurred on the hardware unit associated
with the specified index.
A hardware index of 0 indicates that the error
occurred in the ATM NE but not in any one hardware
unit maintained in the MIB table.
atmfM4IfLosAlarm
.1.3.6.1.4.1.353.100.2.5
that an LOS (Loss of Signal)
condition has occurred on the physical path TP associated
with the specified interface.
atmfM4HwUnitUp
.1.3.6.1.4.1.353.100.2.54
that the operational state of the specified
hardware unit has transitioned to 'up'.
atmfM4HwUnitDown
.1.3.6.1.4.1.353.100.2.55
that the operational state of the specified
hardware unit has transitioned to 'down'.
atmfM4AtmCellIfCreated
.1.3.6.1.4.1.353.100.2.56
that an ATM cell layer interface has just
been created on the interface.
atmfM4AtmCellIfDeleted
.1.3.6.1.4.1.353.100.2.57
that the ATM cell layer interface has just
been deleted.
atmfM4IfPayloadMismatchAlarm
.1.3.6.1.4.1.353.100.2.6
that a payload type mismatch condition has
occurred
on the physical path TP associated with the specified
interface.
atmfM4HwUnitCreated
.1.3.6.1.4.1.353.100.2.66
that the specified hardware unit has been
installed at the specified location.
atmfM4HwUnitDeleted
.1.3.6.1.4.1.353.100.2.67
that the specified hardware unit has been
removed or de-instaleld from the specified location.
atmfM4IfXmissionErrAlarm
.1.3.6.1.4.1.353.100.2.7
that an transmission error condition has occurred
on the physical path TP associated with the specified
interface.
atmfM4IfChanged
.1.3.6.1.4.1.353.100.2.70
that the configuration of the interface has
been changed.
atmfM4IfPathTraceMismatchAlarm
.1.3.6.1.4.1.353.100.2.8
that path trace mismatch condition has occurred
on the physical path TP associated with the specified
interface.
atmfM4IfRdiAlarm
.1.3.6.1.4.1.353.100.2.9
that an RDI (Remote Defect Indication)
condition has occurred on the physical path TP associated
with the specified interface.