ATEN-IPMI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

125

sensorTable

table

.1.3.6.1.4.1.21317.1.3 · 1 row entry · 13 columns

Open in standard view

Uses the aten variant from /opt/observium/mibs/aten.

Command help

Walk sensorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATEN-IPMI-MIB' -M '/opt/observium/mibs/aten:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATEN-IPMI-MIB::sensorTable'

A list of sensors.  The number of entries is
given by the value of ifNumber.

sensorEntry row .1.3.6.1.4.1.21317.1.3.1

An entry containing management information applicable to a
particular sensor.

Indexes

sensorNumber

Column	Syntax	OID
sensorNumber A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initiali…	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.3.1.1`
sensorReading A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.21317.1.3.1.2`
sensorPositiveHysteresis The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21317.1.3.1.3`
sensorNegativeHysteresis The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that ca…	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21317.1.3.1.4`
lncThreshold An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth…	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.21317.1.3.1.5`
lcThreshold The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must define the bit and byte ordering and the for…	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.21317.1.3.1.6`
lnrThreshold The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces start with ifAdminStatus in the down(2) state. As a resu…	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.21317.1.3.1.7`
uncThreshold The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If ifAdminStatus is down(2) then ifOperStatus should be down(2). If ifAdminStatus is changed t…	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.21317.1.3.1.8`
ucThreshold The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object c…	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.21317.1.3.1.9`
unrThreshold The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the managem…	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.21317.1.3.1.10`
eventAssertionEnable The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can…	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21317.1.3.1.11`
eventDeassertionEnable The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occ…	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21317.1.3.1.12`
sensorIDString 16-byte length field for displaying each available sensors' ID string.	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.21317.1.3.1.13`

cpuTable

table

.1.3.6.1.4.1.21317.1.6.2 · 1 row entry · 6 columns

Open in standard view

Uses the aten variant from /opt/observium/mibs/aten.

Command help

Walk cpuTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATEN-IPMI-MIB' -M '/opt/observium/mibs/aten:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATEN-IPMI-MIB::cpuTable'

A list of CPUs.  The number of entries is
given by the number of CPUs.

cpuEntry row .1.3.6.1.4.1.21317.1.6.2.1

An entry containing management information applicable to a
particular CPU.

Indexes

cpuNumber

Column	Syntax	OID
cpuNumber A unique value, greater than zero, for each CPU. It is recommended that values are assigned contiguously starting from 1.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.6.2.1.1`
processor Processor name.	OctetString Constraints: `range: 64-64`	`.1.3.6.1.4.1.21317.1.6.2.1.2`
speed Processor speed (MHz).	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.6.2.1.3`
core The number of processor cores.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.6.2.1.4`
coreActive The number of active processor cores.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.6.2.1.5`
manufacturer CPU Manufacturer	OctetString Constraints: `range: 64-64`	`.1.3.6.1.4.1.21317.1.6.2.1.6`

dimmTable

table

.1.3.6.1.4.1.21317.1.6.3 · 1 row entry · 8 columns

Open in standard view

Uses the aten variant from /opt/observium/mibs/aten.

Command help

Walk dimmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATEN-IPMI-MIB' -M '/opt/observium/mibs/aten:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATEN-IPMI-MIB::dimmTable'

A list of DIMMs.  The number of entries is
given by the number of DIMMs.

dimmEntry row .1.3.6.1.4.1.21317.1.6.3.1

An entry containing management information applicable to a
particular DIMM.

Indexes

dimmNumber

Column	Syntax	OID
dimmNumber A unique value, greater than zero, for each DIMM. It is recommended that values are assigned contiguously starting from 1.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.6.3.1.1`
dimmLocation The location of this DIMM.	OctetString Constraints: `range: 64-64`	`.1.3.6.1.4.1.21317.1.6.3.1.2`
dimmMaxCapSpeed The max capable speed (MHz) of this DIMM.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.6.3.1.3`
dimmOpSpeed The current operation speed (MHz) of this DIMM.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.6.3.1.4`
dimmSize The size (MBytes) of this DIMM.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.6.3.1.5`
dimmSerialNo The serial number of this DIMM.	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.21317.1.6.3.1.6`
dimmPartNo The serial number of this DIMM.	OctetString Constraints: `range: 64-64`	`.1.3.6.1.4.1.21317.1.6.3.1.7`
dimmManufacturer The manufacturer of this DIMM.	OctetString Constraints: `range: 64-64`	`.1.3.6.1.4.1.21317.1.6.3.1.8`

controllerTable

table

.1.3.6.1.4.1.21317.1.7.1 · 1 row entry · 10 columns

Open in standard view

Uses the aten variant from /opt/observium/mibs/aten.

Command help

Walk controllerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATEN-IPMI-MIB' -M '/opt/observium/mibs/aten:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATEN-IPMI-MIB::controllerTable'

A list of raid controllers.  The number of entries is
given by the number of controllers.

controllerEntry row .1.3.6.1.4.1.21317.1.7.1.1

An entry containing management information applicable to a
particular controller.

Indexes

controllerNumber

Column	Syntax	OID
controllerNumber A unique value, greater than zero, for each controller. It is recommended that values are assigned contiguously starting from 1.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.1.1.1`
controllerProductName Product name of the controller.	OctetString Constraints: `range: 96-96`	`.1.3.6.1.4.1.21317.1.7.1.1.2`
serial Serial number of the controller.	OctetString Constraints: `range: 32-32`	`.1.3.6.1.4.1.21317.1.7.1.1.3`
package Package version of the controller.	OctetString Constraints: `range: 96-96`	`.1.3.6.1.4.1.21317.1.7.1.1.4`
fwVersion Firmware version of the controller.	OctetString Constraints: `range: 32-32`	`.1.3.6.1.4.1.21317.1.7.1.1.5`
biosVersion BIOS version of the controller.	OctetString Constraints: `range: 32-32`	`.1.3.6.1.4.1.21317.1.7.1.1.6`
bootBlockVersion Boot block version of the controller.	OctetString Constraints: `range: 32-32`	`.1.3.6.1.4.1.21317.1.7.1.1.7`
batteryStatus Battery status of the controller. 0: Missing 1: Charging 2: Discharging 3: Optimal 4: Needs to be replaced	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.1.1.8`
pcieLocation PCIE location of the controller. 0: ONBOARD 1: RISER WIO Right 2: RISER WIO Left 3: RISER Ultra IO	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.1.1.9`
pcieSlot PCIE slot number of the controller.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.1.1.10`

phyHddTable

table

.1.3.6.1.4.1.21317.1.7.2 · 1 row entry · 15 columns

Open in standard view

Uses the aten variant from /opt/observium/mibs/aten.

Command help

Walk phyHddTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATEN-IPMI-MIB' -M '/opt/observium/mibs/aten:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATEN-IPMI-MIB::phyHddTable'

A list of HDDs.  The number of entries is
given by the number of HDDs.

hddEntry row .1.3.6.1.4.1.21317.1.7.2.1

An entry containing management information applicable to a
particular HDD.

Indexes

hddNumber

Column	Syntax	OID
hddNumber A unique value, greater than zero, for each HDD. It is recommended that values are assigned contiguously starting from 1.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.2.1.1`
hddControllerNumber The controller that this HDD belongs to.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.2.1.2`
enclosureNumber The enclosure that this HDD belongs to.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.2.1.3`
status Current status of the HDD. 1: present 0: not present	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.2.1.4`
temperature Current temperature of the HDD.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.2.1.5`
capacity Capacity(GB) of the HDD.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.2.1.6`
vendor The vendor of the HDD.	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.21317.1.7.2.1.7`
modelName Model name of the HDD.	OctetString Constraints: `range: 32-32`	`.1.3.6.1.4.1.21317.1.7.2.1.8`
revision Revision of the HDD.	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.21317.1.7.2.1.9`
sn The serial number of the HDD.	OctetString Constraints: `range: 32-32`	`.1.3.6.1.4.1.21317.1.7.2.1.10`
linkSpeed The link speed of the HDD. 0: not defined 1: 1.5Gb/s - SATA 150 2: 3.0Gb/s 3: 6.0Gb/s 4: 12.0Gb/s	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.2.1.11`
fwState The firmware state of the HDD. 00: Unconfigured good drive 01: Unconfigured bad drive 02: Hot spare drive 16: Configured-good drive(data invalid) 17: Configured-bad drive (data invalid) 20: Configured-drive is rebuildin…	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.2.1.12`
otherErrCount Other error count of the HDD.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.2.1.13`
predictedFailCount Predicted fail count of the HDD.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.2.1.14`
mediaErrCount Media error Count of the HDD.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.2.1.15`

logHddTable

table

.1.3.6.1.4.1.21317.1.7.3 · 1 row entry · 12 columns

Open in standard view

Uses the aten variant from /opt/observium/mibs/aten.

Command help

Walk logHddTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATEN-IPMI-MIB' -M '/opt/observium/mibs/aten:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATEN-IPMI-MIB::logHddTable'

A list of volumes.  The number of entries is
given by the number of volumes.

volumeEntry row .1.3.6.1.4.1.21317.1.7.3.1

An entry containing management information applicable to a
particular volume.

Indexes

volNumber

Column	Syntax	OID
volNumber A unique value, greater than zero, for each volume. It is recommended that values are assigned contiguously starting from 1.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.3.1.1`
volControllerNumber The controller that this HDD belongs to.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.3.1.2`
volStatus Current status of the volume. 1: present 0: not present	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.3.1.3`
volCapacity Capacity(GB) of the volume.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.3.1.4`
priRaidLevel Primary raid level of the volume.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.3.1.5`
raidLevelQualifier Raid level qaulifier of the volume.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.3.1.6`
secRaidLevel Secondary raid level of the volume.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.3.1.7`
ldStripSize LD strip size of the volume. (per DDF: 4=8K, 5=16K, 7=64K, 11=1MB, etc.)	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.3.1.8`
numDevices number of drives per span.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.3.1.9`
spanDepth Span depth of the volume.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.3.1.10`
state State of the volume. 0: offline 1: partially degraded 2: degraded 3: optimal	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.7.3.1.11`
volName The name of the volume.	OctetString Constraints: `range: 64-64`	`.1.3.6.1.4.1.21317.1.7.3.1.12`

userTable

table

.1.3.6.1.4.1.21317.1.9 · 1 row entry · 4 columns

Open in standard view

Uses the aten variant from /opt/observium/mibs/aten.

Command help

Walk userTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATEN-IPMI-MIB' -M '/opt/observium/mibs/aten:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATEN-IPMI-MIB::userTable'

A list of all users.

userInfo row .1.3.6.1.4.1.21317.1.9.1

An entry containing management information applicable to a
particular user.

Indexes

Column	Syntax	OID
id A unique value for user ID, greater than zero.	Integer32 Constraints: `range: 1-15`	`.1.3.6.1.4.1.21317.1.9.1.1`
username User name.	OctetStringr/w Constraints: `range: 16-16`	`.1.3.6.1.4.1.21317.1.9.1.2`
password Password.	OctetStringr/w Constraints: `range: 20-20`	`.1.3.6.1.4.1.21317.1.9.1.3`
privilege User privilege.	Integer32r/w Constraints: `range: 2-4`	`.1.3.6.1.4.1.21317.1.9.1.4`

alertTable

table

.1.3.6.1.4.1.21317.1.11 · 1 row entry · 3 columns

Open in standard view

Uses the aten variant from /opt/observium/mibs/aten.

Command help

Walk alertTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATEN-IPMI-MIB' -M '/opt/observium/mibs/aten:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATEN-IPMI-MIB::alertTable'

A list of all alerts.

alertInfo row .1.3.6.1.4.1.21317.1.11.1

An entry containing management information applicable to a
particular alert.

Indexes

Column	Syntax	OID
alertNo A unique value for alert ID, greater than zero.	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.21317.1.11.1.1`
alertLevel Alert Level.	OctetString Constraints: `range: 25-25`	`.1.3.6.1.4.1.21317.1.11.1.2`
destinationAddress Alert Level.	OctetString Constraints: `range: 270-270`	`.1.3.6.1.4.1.21317.1.11.1.3`

psuTable

table

.1.3.6.1.4.1.21317.1.14.2 · 1 row entry · 13 columns

Open in standard view

Uses the aten variant from /opt/observium/mibs/aten.

Command help

Walk psuTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATEN-IPMI-MIB' -M '/opt/observium/mibs/aten:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATEN-IPMI-MIB::psuTable'

A list of PSUs. The number of entries is
given by the number of PSUs.

psuEntry row .1.3.6.1.4.1.21317.1.14.2.1

An entry containing a particular PSU information.

Indexes

psuIndex

Column Syntax OID

psuIndex

A unique value, start from one, for each PSU. It is
recommended that values are assigned contiguously
starting from 1.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.21317.1.14.2.1.1

psuStatus

PSU Status.

Enumeration

Enumerated Values:

0	fail
1	good

.1.3.6.1.4.1.21317.1.14.2.1.2

inputVoltage

PSU Input Voltage.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.21317.1.14.2.1.3

inputCurrent

PSU Input Current.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.21317.1.14.2.1.4

inputPower

PSU Input Power.

Integer32

Constraints:
range: 1-1048576

.1.3.6.1.4.1.21317.1.14.2.1.5

outputVoltage

PSU Output Voltage.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.21317.1.14.2.1.6

outputCurrent

PSU Output Current.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.21317.1.14.2.1.7

outputPower

PSU Output Power.

Integer32

Constraints:
range: 1-1048576

.1.3.6.1.4.1.21317.1.14.2.1.8

temperature1

PSU Temperature1.

Integer32

Constraints:
range: 1-256

.1.3.6.1.4.1.21317.1.14.2.1.9

temperature2

PSU Temperature2.

Integer32

Constraints:
range: 1-256

.1.3.6.1.4.1.21317.1.14.2.1.10

fanRPM1

PSU Fan RPM1.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.21317.1.14.2.1.11

fanRPM2

PSU Fan RPM2.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.21317.1.14.2.1.12

psuSerialNumber

PSU Serial Number.

OctetString

Constraints:
range: 32-32

.1.3.6.1.4.1.21317.1.14.2.1.13

selTable

table

.1.3.6.1.4.1.21317.1.18 · 1 row entry · 6 columns

Open in standard view

Uses the aten variant from /opt/observium/mibs/aten.

Command help

Walk selTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATEN-IPMI-MIB' -M '/opt/observium/mibs/aten:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATEN-IPMI-MIB::selTable'

This table displays a record of critical system events from the monitored system.

selEntry row .1.3.6.1.4.1.21317.1.18.1

An entry event logs indicate the time when a critical condition occurred and the time it was resolved

Indexes

selEid

Column	Syntax	OID
selEid system event log EID	Integer32 Constraints: `range: 1-512`	`.1.3.6.1.4.1.21317.1.18.1.1`
selTimeStamp System event log trigger time	SNMPv2-TCDateAndTime Type Constraints: `range: 8` `range: 11` Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	`.1.3.6.1.4.1.21317.1.18.1.2`
selSensorName System evnet log sensor name	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.21317.1.18.1.3`
selSensorType System evnet log sensor type	OctetString Constraints: `range: 64-64`	`.1.3.6.1.4.1.21317.1.18.1.4`
selDescription System evnet log description	OctetString Constraints: `range: 512-512`	`.1.3.6.1.4.1.21317.1.18.1.5`
selRawData System evnet log raw data	OctetString Constraints: `range: 20-20`	`.1.3.6.1.4.1.21317.1.18.1.6`

nvmeCtrlTbl

table

.1.3.6.1.4.1.21317.1.19.1 · 1 row entry · 6 columns

Open in standard view

Uses the aten variant from /opt/observium/mibs/aten.

Command help

Walk nvmeCtrlTbl

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATEN-IPMI-MIB' -M '/opt/observium/mibs/aten:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATEN-IPMI-MIB::nvmeCtrlTbl'

A list of NVMe controllers.  The number of entries is
given by the number of controllers.

nvmeCtrlEntry row .1.3.6.1.4.1.21317.1.19.1.1

An entry containing a particular NVMe controller information.

Indexes

nvmeCtrlPresent

Column Syntax OID

nvmeCtrlPresent

NVMe controllor present or not.

Enumeration

Enumerated Values:

0	absent
1	present

.1.3.6.1.4.1.21317.1.19.1.1.1

maxTemp

The maximum temperature from all existed NVMe drives.

Integer32

Constraints:
range: 1-127

.1.3.6.1.4.1.21317.1.19.1.1.2

maxSlotNum

Maximum slot number at each group.

Integer32

Constraints:
range: 0-31

.1.3.6.1.4.1.21317.1.19.1.1.3

onboard

NVMe controller type.

Enumeration

Enumerated Values:

0	no
1	yes

.1.3.6.1.4.1.21317.1.19.1.1.4

driverIndex

NVMe BPN driver index.

Integer32

Constraints:
range: 0-1

.1.3.6.1.4.1.21317.1.19.1.1.5

cpldVer

CPLD FW version of this NVMe controller.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.21317.1.19.1.1.6

nvmeDriveTbl

table

.1.3.6.1.4.1.21317.1.19.2 · 1 row entry · 17 columns

Open in standard view

Uses the aten variant from /opt/observium/mibs/aten.

Command help

Walk nvmeDriveTbl

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATEN-IPMI-MIB' -M '/opt/observium/mibs/aten:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATEN-IPMI-MIB::nvmeDriveTbl'

A list of NVMe drives.  The number of entries is
given by the number of drives.

nvmeDriveEntry row .1.3.6.1.4.1.21317.1.19.2.1

An entry containing a particular NVMe drive information.

Indexes

slotId

Column Syntax OID

slotId

NVMe Slot ID at one group.

Integer32

Constraints:
range: 0-31

.1.3.6.1.4.1.21317.1.19.2.1.1

groupId

Group ID at this slot.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.21317.1.19.2.1.2

nvmeDrivePresent

NVMe drive presence at this slot.

Enumeration

Enumerated Values:

0	absent
1	present

.1.3.6.1.4.1.21317.1.19.2.1.3

locate

NVMe drive locate/dislocate status at this slot.

Enumeration

Enumerated Values:

0	dislocate
1	locate

.1.3.6.1.4.1.21317.1.19.2.1.4

save2Remove

NVMe drive save2Remove status at this slot.

Enumeration

Enumerated Values:

0	not-ready
1	ready

.1.3.6.1.4.1.21317.1.19.2.1.5

vmdMode

NVMe drive vmdMode status at this slot.

Enumeration

Enumerated Values:

0	vmd-off
1	vmd-on

.1.3.6.1.4.1.21317.1.19.2.1.6

temp

NVMe drive temperature at this slot.

Integer32

Constraints:
range: 0-127

.1.3.6.1.4.1.21317.1.19.2.1.7

classCode

NVMe drive class code at this slot.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.21317.1.19.2.1.8

vendorID

NVMe drive class code at this slot.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.21317.1.19.2.1.9

serialNum

NVMe drive serial number at this slot.

OctetString

Constraints:
range: 20-20

.1.3.6.1.4.1.21317.1.19.2.1.10

modelNum

NVMe drive model number at this slot.

OctetString

Constraints:
range: 40-40

.1.3.6.1.4.1.21317.1.19.2.1.11

port0MaxLinkSpd

NVMe drive port0 max link speed at this slot.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.21317.1.19.2.1.12

port0MaxLinkWidth

NVMe drive port0 max link width at this slot.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.21317.1.19.2.1.13

port1MaxLinkSpd

NVMe drive port1 max link speed at this slot.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.21317.1.19.2.1.14

port1MaxLinkWidth

NVMe drive port1 max link width at this slot.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.21317.1.19.2.1.15

initPowerRequirement

Initial power requirment (Watts).

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.21317.1.19.2.1.16

maxPowerRequirement

Maximum power requirment (Watts).

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.21317.1.19.2.1.17

nicTable

table

.1.3.6.1.4.1.21317.1.20 · 1 row entry · 12 columns

Open in standard view

Uses the aten variant from /opt/observium/mibs/aten.

Command help

Walk nicTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATEN-IPMI-MIB' -M '/opt/observium/mibs/aten:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATEN-IPMI-MIB::nicTable'

A list of NICs.  The number of entries is
given by the number of NICs.

nicEntry row .1.3.6.1.4.1.21317.1.20.1

An entry containing management information applicable to a
particular NIC.

Indexes

nicNumber

Column	Syntax	OID
nicNumber A unique value, greater than zero, for each NIC. It is recommended that values are assigned contiguously starting from 1.	Integer32 Constraints: `range: 1-32`	`.1.3.6.1.4.1.21317.1.20.1.1`
nicName Name of the NIC.	OctetString Constraints: `range: 32-32`	`.1.3.6.1.4.1.21317.1.20.1.2`
nicMac MAC of the NIC.	OctetString Constraints: `range: 17-17`	`.1.3.6.1.4.1.21317.1.20.1.3`
nicIpv4Addr IPv4 address of the NIC.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.21317.1.20.1.4`
nicIpv6Addr IPv6 address of the NIC.	OctetString Constraints: `range: 45-45`	`.1.3.6.1.4.1.21317.1.20.1.5`
nicGateway Gateway of the NIC.	OctetString Constraints: `range: 45-45`	`.1.3.6.1.4.1.21317.1.20.1.6`
nicNetmask Netmask of the NIC.	OctetString Constraints: `range: 45-45`	`.1.3.6.1.4.1.21317.1.20.1.7`
nicFqdn FQDN of the NIC.	OctetString Constraints: `range: 256-256`	`.1.3.6.1.4.1.21317.1.20.1.8`
nicDns DNS of the NIC.	OctetString Constraints: `range: 91-91`	`.1.3.6.1.4.1.21317.1.20.1.9`
nicSpeed Speed of the NIC. (Unit: Mbps)	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.21317.1.20.1.10`
nicDescript Description of the NIC.	OctetString Constraints: `range: 255-255`	`.1.3.6.1.4.1.21317.1.20.1.11`
nicStatus Status of the NIC.	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.21317.1.20.1.12`