AT-UWC-WLAN-SWITCH-MIB Table View

wsAPStandaloneExpectedChannel

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.207.8.42.8.34.1.11.1.1

wsAPLocation

This object indicates description of an AP, often based on its location.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.1.11.1.2

wsAPMode

This field indicates whether this AP is managed
by the controller, by an administrator, or is a Rogue AP.

Enumeration

Enumerated Values:

1	wsManaged
2	standalone
3	rogue

.1.3.6.1.4.1.207.8.42.8.34.1.11.1.3

wsAPAuthenticationPasswd

If AP authentication is enabled, this indicates the
password for an AP to authenticate to the controller.
This must match the password configured on an AP.
When passwod is configured this object will always
return '****…

OctetString

Constraints:
range: 8-63

.1.3.6.1.4.1.207.8.42.8.34.1.11.1.4

wsUseAPProfileId

If AP is managed by controller, this object indicates
Id of configuration profile for this AP.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.207.8.42.8.34.1.11.1.5

wsAPRadio1Channel

This object indicates the fixed channel for the AP
radio one. Zero indicates automatic channel
assignment.

Integer32

Constraints:
range: 0-14
range: 36-36
range: 40-40
range: 42-42
range: 44-44
range: 48-48
range: 50-50
range: 52-52
range: 56-56
range: 58-58
range: 60-60
range: 64-64
range: 100-100
range: 104-104
range: 108-108
range: 112-112
range: 116-116
range: 120-120
range: 124-124
range: 128-128
range: 132-132
range: 136-136
range: 140-140
range: 149-149
range: 152-153
range: 157-157
range: 160-161
range: 165-165

.1.3.6.1.4.1.207.8.42.8.34.1.11.1.6

wsAPRadio2Channel

This object indicates the fixed channel for the AP
radio two. Zero indicates automatic channel
assignment.

Integer32

.1.3.6.1.4.1.207.8.42.8.34.1.11.1.7

wsAPRadio1TxPower

This indicates the power setting of AP radio one.
Zero indicates automatic power adjustment.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.207.8.42.8.34.1.11.1.8

wsAPRadio2TxPower

This indicates the power setting of AP radio two.
Zero indicates automatic power adjustment.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.207.8.42.8.34.1.11.1.9

This object indicates the expected channel for the AP
in standalone mode. Zero indicates that any channel is allowed.

Integer32

.1.3.6.1.4.1.207.8.42.8.34.1.11.1.10

wsAPStandaloneExpectedSecurity

This object indicates the expected security mode for the AP
in standalone mode. Zero indicates that any security mode is allowed.

Enumeration

Enumerated Values:

0	any
1	open
2	wep
3	wpa

.1.3.6.1.4.1.207.8.42.8.34.1.11.1.11

wsAPStandaloneExpectedSsid

This object indicates the expected SSID for the AP
in standalone mode. A null string indicates that any
SSID is allowed.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.1.11.1.12

wsAPStandaloneExpectedWds

This object indicates whether the AP is allowed to operate as a bridge.
Configurable values are:
any Either WDS or normal mode is allowed
normal - AP is not allowed to operate in WDS mode
bridge - AP is only allowed to…

Enumeration

Enumerated Values:

0	any
1	normal
2	bridge

.1.3.6.1.4.1.207.8.42.8.34.1.11.1.13

wsAPStandaloneExpectedWired

This object indicates the expected wired network mode for the AP
in standalone mode.

Enumeration

Enumerated Values:

0	allowed
1	not-allowed

.1.3.6.1.4.1.207.8.42.8.34.1.11.1.14

wsAPConfigRowStatus

This object is used to create or delete entries in the table.
The supported values are:

active(1) - indicates a valid entry
createAndGo(4) - creates a new entry in the table
destroy(6) - removes …

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.207.8.42.8.34.1.11.1.15

wsKnownClientTable

table

.1.3.6.1.4.1.207.8.42.8.34.1.24 · 1 row entry · 4 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsKnownClientTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsKnownClientTable'

This table contains entries of the known clients.

wsKnownClientEntry row .1.3.6.1.4.1.207.8.42.8.34.1.24.1

The entry contains parameters of a known client.

Indexes

wsKnownClientMacAddress

Column Syntax OID

wsKnownClientMacAddress

MAC address of the known client.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.1.24.1.1

wsKnownClientAuthAction

This object indicates whether to grant, deny, or use global action
for client authentication.

Enumeration

Enumerated Values:

1	global
2	grant
3	deny

.1.3.6.1.4.1.207.8.42.8.34.1.24.1.2

wsKnownClientName

Descriptive name of the known client.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.1.24.1.3

wsKnownClientRowStatus

This object is used to create or delete entries in this
table.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.207.8.42.8.34.1.24.1.4

wsSwitchStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.1.27 · 1 row entry · 12 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsSwitchStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsSwitchStatusTable'

This table contain access point and client status parameters
of peer controllers of wireless controller.

wsSwitchStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.1.27.1

Each entry describes the access point and client status
parameters of each peer of wireless controller.

Indexes

wsSwitchIPAddress

Column	Syntax	OID
wsSwitchIPAddress This object represents wireless controller IP address. When wireless mode is in disabled state, return entry will be none.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.207.8.42.8.34.1.27.1.1`
wsSwitchClusterPriority Preference level of the controller to become the Cluster Controller of the Peer Group.	Unsigned32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.207.8.42.8.34.1.27.1.2`
wsSwitchAPImageDownloadMode The AP image download mode supported by the wireless controller. The displayed mode can be one of the following: Integrated - The controller supports Integrated mode. In this mode, the AP code is located …	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.207.8.42.8.34.1.27.1.3`
wsSwitchTotalAPs Sum of all the WS managed APs, connection failed APs, and discovered APs in the database of specified controller.	Unsigned32 Constraints: `range: 0-48`	`.1.3.6.1.4.1.207.8.42.8.34.1.27.1.4`
wsSwitchManagedAPs Total number of WS managed APs currently authenticated, configured and have an active connection with the specifed controller.	Unsigned32 Constraints: `range: 0-48`	`.1.3.6.1.4.1.207.8.42.8.34.1.27.1.5`
wsSwitchDiscoveredAPs Number of APs that are connected to the specified controller, but have not been completely configured.	Unsigned32 Constraints: `range: 0-48`	`.1.3.6.1.4.1.207.8.42.8.34.1.27.1.6`
wsSwitchConnectionFailedAPs Number of APs that were previously authenticated and managed, but currently do not have connection with the specified controller.	Unsigned32 Constraints: `range: 0-48`	`.1.3.6.1.4.1.207.8.42.8.34.1.27.1.7`
wsSwitchMaximumManagedAPs Maximum number of APs that the specified controller can manage.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.1.27.1.8`
wsSwitchTotalClients Total number of clients in the database that include clients with an associated, authenticated and disassociated status.	Unsigned32 Constraints: `range: 0-8192`	`.1.3.6.1.4.1.207.8.42.8.34.1.27.1.9`
wsSwitchAuthenticatedClients Total number of authenticated clients across all APs managed by the specified controller.	Unsigned32 Constraints: `range: 0-8192`	`.1.3.6.1.4.1.207.8.42.8.34.1.27.1.10`
wsSwitchWLANUtilization Total network utilization across all APs managed by the specifed controller.	Unsigned32 Constraints: `range: 0-100`	`.1.3.6.1.4.1.207.8.42.8.34.1.27.1.11`
wsSwitchDistTunnelClients Number of clients that are currently sending and receiving packets via distributed tunnels.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.1.27.1.12`

wsSwitchStatisticsTable

table

.1.3.6.1.4.1.207.8.42.8.34.1.28 · 1 row entry · 8 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsSwitchStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsSwitchStatisticsTable'

This table contain WLAN statistics for every controller in the
peer group. Only Cluster Controller can hold the entries for peer
controllers. The controller which is not a Cluster Controller only keep
statistics local to it.

wsSwitchStatisticsEntry row .1.3.6.1.4.1.207.8.42.8.34.1.28.1

Each entry describe WLAN statistics of specified controller in the
wireless system.

Indexes

wsSwitchIPAddress

Column	Syntax	OID
wsSwitchWLANBytesTransmitted Total bytes transmitted across all APs managed by the specified controller.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.1.28.1.1`
wsSwitchWLANBytesReceived Total bytes received across all APs managed by the specified controller.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.1.28.1.2`
wsSwitchWLANPktsTransmitted Total packets transmitted across all APs managed by the specified controller.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.1.28.1.3`
wsSwitchWLANPktsReceived Total packets received across all APs managed by the specified controller.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.1.28.1.4`
wsSwitchWLANBytesTransmitDropped Total bytes dropped in the transmit direction across all APs managed by the specified controller. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.1.28.1.5`
wsSwitchWLANBytesRecvDropped Total bytes dropped in the receive direction across all APs managed the specified controller. This is due to client QoS actions affecting the wireless up (inbound) direction from AP to client.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.1.28.1.6`
wsSwitchWLANPktsTransmitDropped Total packets dropped in the transmit direction across all APs managed by the specified controller. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.1.28.1.7`
wsSwitchWLANPktsRecvDropped Total packets dropped in the receive direction across all APs managed by the specified controller. This is due to client QoS actions affecting the wireless up (inbound) direction from AP to client.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.1.28.1.8`

wsIPPollListTable

table

.1.3.6.1.4.1.207.8.42.8.34.2.3 · 1 row entry · 3 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsIPPollListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsIPPollListTable'

This table contains IP addresses to poll on
the network.

wsIPPollListEntry row .1.3.6.1.4.1.207.8.42.8.34.2.3.1

An IP address list that can be configured globally on
the wireless controller to define which IP addresses to poll
in order to discover new APs and peer controllers. This list
is used when discovery via IP Polling is en…

Indexes

wsPollIpAddress

Column Syntax OID

wsPollIpAddress

IP address of an AP or controller to poll.

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.2.3.1.1

wsPollIPStatus

Indicates whether or not the controller reached this IP address.

Enumeration

Enumerated Values:

1	not-polled
2	polled
3	discovered
4	discovered-failed

.1.3.6.1.4.1.207.8.42.8.34.2.3.1.2

wsIPPollRowStatus

This object is used to create and delete entries
in the table.

wsL2DiscoveryVlanRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.207.8.42.8.34.2.3.1.3

wsL2DiscoveryVlanListTable

table

.1.3.6.1.4.1.207.8.42.8.34.2.4 · 1 row entry · 2 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsL2DiscoveryVlanListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsL2DiscoveryVlanListTable'

This table contains the list of VLANs on which to send L2 discovery
multicast packets.

wsL2DiscoveryVlanListEntry row .1.3.6.1.4.1.207.8.42.8.34.2.4.1

A list of VLANs on which to send L2 discovery multicast
frames when L2 broadcast discovery mode is enabled.
The entries in this table are limited to sixteen.
By default there will be one entry in this table with
wsL2Dis…

Indexes

wsL2DiscoveryVlanId

Column Syntax OID

wsL2DiscoveryVlanId

VLAN Id on which controller will send L2 discovery multicast
frames.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.207.8.42.8.34.2.4.1.1

This variable is used to create and delete entries
in the table.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.207.8.42.8.34.2.4.1.2

wsAPProfileTable

table

.1.3.6.1.4.1.207.8.42.8.34.3.1 · 1 row entry · 11 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPProfileTable'

The following parameters can be configured within an AP configuration
profile. A profile is used to replicate a single AP configuration across
multiple managed APs. Modification or deletion is not allowed if the
profile is assigned to one or more managed APs except
wsCopyAPProfileToProfileId.

wsAPProfileEntry row .1.3.6.1.4.1.207.8.42.8.34.3.1.1

Each entry has parameters that can be configured within an AP configuration
profile. A profile is used to replicate a single AP configuration across
multiple managed APs, and is indexed by an integer Id.

Indexes

wsAPProfileId

Column Syntax OID

wsAPProfileId

Unique AP Profile Id for each entry.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.207.8.42.8.34.3.1.1.1

wsAPProfileName

AP configuration profile name.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.3.1.1.2

wsAPProfileState

Indicates current state of AP Profile.

Enumeration

Enumerated Values:

0	none
1	configured
2	requested
3	in-progress
4	associated

.1.3.6.1.4.1.207.8.42.8.34.3.1.1.3

wsAPProfileRowStatus

This object is used to create or delete entries in
the table.

wsCopyAPProfileToProfileId

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.207.8.42.8.34.3.1.1.8

This object copies the AP profile configuration to the specified
valid AP Profile Id. If specified Profile Id is already
assigned to one or more managed APs, the operation is
not allowed. Read on this object will always…

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.207.8.42.8.34.3.1.1.9

wsAPProfileApply

This object is used to apply the AP profile configuration.
Read on this object will always return none.

Enumeration

Enumerated Values:

1	none
2	apply

.1.3.6.1.4.1.207.8.42.8.34.3.1.1.10

wsAPHardwareTypeID

AP Hardware type ID associated with each entry.

Integer32

Constraints:
range: 0-6

.1.3.6.1.4.1.207.8.42.8.34.3.1.1.11

wsAPWiredDetectionVlanId

VLAN ID that is used to send packets on the wire that enable the
system to discover rogue APs attached to the wired network.

Integer32

Constraints:
range: 0-4094

.1.3.6.1.4.1.207.8.42.8.34.3.1.1.12

wsAPProfileDisconnAPFwdingMode

Flag to enable/disable Disconnected AP Data Forwarding Mode.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.1.1.13

wsAPProfileDisconnAPMgmtMode

Flag to enable/disable Disconnected AP Management Mode.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.1.1.14

wsAPProfileAeroScoutSupportMode

Flag to enable/disable AE Protocol Support Mode.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.1.1.15

wsAPProfileRadioTable

table

.1.3.6.1.4.1.207.8.42.8.34.3.3 · 1 row entry · 38 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPProfileRadioTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPProfileRadioTable'

This table contains parameters that can be configured with
in an AP Profile per radio interface.

wsAPProfileRadioEntry row .1.3.6.1.4.1.207.8.42.8.34.3.3.1

Each entry in this table represents parameters
that can be configured with in an AP profile per radio
interface. Two entries in this table will get created
automatically for each AP profile being created in
wsAPProfileT…

Indexes

wsAPProfileId wsAPRadioInterface

Column Syntax OID

wsAPRadioInterface

AP physical radio interface number.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.1

wsAPRadioAdminMode

Flag to indicate whether the radio is operational.

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.2

wsAPRadioFrequency

Indicates which physical layer technology to use on radio.
Default value for radio 1 is 'ieee802dot11bgn' and default value
for radio 2 is 'ieee802dot11an'.

Enumeration

Enumerated Values:

1	ieee802dot11a
2	ieee802dot11bg
3	ieee802dot11an
4	ieee802dot11bgn
5	fiveGHzIeee802dot11n
6	twoDotFourGHzIeee802dot11n
7	fiveGHzIeee802dot11anac
8	fiveGHzIeee802dot11nac

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.3

wsAPRadioOtherChannelsScanMode

When Sentry mode is disabled this flag controls whether the radio moves away from
the operating channel while doing scans. When this mode is disabled the radio scans
only on the operating channel. When sentry mode is en…

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.4

wsAPRadioOtherChannelsScanInterval

If scan mode is enable, indicates how often the radio
leaves its operational channel.

Integer32

Constraints:
range: 30-120

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.5

wsAPRadioSentryScanMode

When Sentry mode is enabled the radio doesn't do any data forwarding, but only periodically
scan channels for rogues. The length of time spent on each channels controlled by the
'scan duration' time.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.6

wsAPRadioSentryScanChannel

If scanning is enabled, this object indicates on which frequencies to
scan.

Enumeration

Enumerated Values:

1	ieee802dot11an
2	ieee802dot11bORgn
3	all

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.7

wsAPRadioScanDuration

Indicates how long the radio can scan before returning to its operational
channel. The default value is 10ms.

Integer32

Constraints:
range: 10-2000

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.8

wsAPRadioRateLimitMode

This object enables/disables rate limit for broadcast and multicast
traffic transmitted across the network.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.9

wsAPRadioRateLimit

Allowed rate limit for broadcast/multicast traffic
transmitted across the network. Broadcast/multicast
traffic below this limit is transmitted normally.

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.10

wsAPRadioRateLimitBurst

Broadcast/multicast traffic can occur in bursts up to
this value before all traffic is considered to exceed
the limit.

Integer32

Constraints:
range: 1-75

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.11

wsAPRadioBeaconInterval

Interval at which the AP transmit beacon frames.

Integer32

Constraints:
range: 20-2000

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.12

wsAPRadioDTIMPeriod

Indicates the number of beacons between Delivery Traffic
Indication MAP(DTIM). DTIM indicates buffered broadcast/multicast
traffic on an AP.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.13

wsAPRadioFragmentationThreshold

This object limits the size of packets transmitted over the network.
Only even values are allowed in the defined range.

Integer32

Constraints:
range: 256-2346

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.14

wsAPRadioRTSThreshold

This object indicates the number of octets in an
MAC Protocol Data Unit(MPDU), below which an
request to send(RTS)/clear to send(CTS) handshake
shall not be performed.

Integer32

Constraints:
range: 0-2347

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.15

wsAPRadioShortRetryLimit

This object indicates the maximum number of transmission attempts on
frame sizes less than or equal to the RTS threshold.
Set action for this object will be supported in next release.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.16

wsAPRadioLongRetryLimit

This object indicates the maximum number of transmission attempts
on frame sizes greater than the RTS threshold. Set action
for this object will be supported in next release.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.17

wsAPRadioMaxTransmitLifetime

This object indicates the elapsed time after the initial
transmission of MAC Service Data Unit(MSDU), after
which further attempts to transmit the MSDU shall be
terminated. Set action for this object will be supported
i…

wsAPRadioMaxReceiveLifetime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.18

This object indicates the elapsed time after the initial
reception of a fragmented MAC Management Protocol Data Unit(MMPDU)
or MSDU, after which further attempts to reassemble
the MMPDU or MSDU shall be terminated. Se…

wsAPRadioLoadBalancingMode

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.19

wsAPRadioMaxClients

Maximum number of client stations that can simultaneously
get associated on this interface.

Integer32

Constraints:
range: 0-200

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.20

wsAPRadioAutoPowerMode

Flag to indicate power is automatically adjusted by
the controller.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.21

wsAPRadioTxPower

If auto power mode is disabled, this object indicates a fixed
power setting for the radio.

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.22

wsAPRadioWMMMode

Flag to enable/disable Wi-Fi MultiMedia Mode. When enabled,
QOS settings affect both downstream traffic to the sation
and upstream traffic to the AP. When disabled, QOS only applies
to downstream traffic.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.23

Flag to indicate that AP will load balance users on
this radio.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.24

wsAPRadioUtilization

If load balancing is enabled, percentage of network utilization
allowed on the radio before clients are denied. This value is
displayed in percentage.

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.25

wsAPRadioAutoChannelMode

Flag to indicate whether initial AP radio channel assignment
can be automatically adjusted by controller due to changes in
radio performance.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.26

wsAPRadioStationIsolationMode

Flag to indicate whether Station Isolation is enabled on the Radio.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.27

wsAPRadioChannelBandwidth

Bandwidth used in the channel.

Enumeration

Enumerated Values:

1	twentyMHz
2	fortyMHz
3	eightyMHz

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.28

wsAPRadioPrimaryChannel

Specify relative location of Primary Channel in the 40 MHz channel.

Enumeration

Enumerated Values:

1	upper
2	lower

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.29

wsAPRadioProtectionMode

Turn on/off Protection mechanisms.

Enumeration

Enumerated Values:

1	auto
2	off

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.30

wsAPRadioShortGuardInterval

Dead time, in nanoseconds, between OFDM symbols which prevents
Inter-Symbol and Inter-Carrier Interference (ISI, ICI).
The short guard interval, when enabled, is 400ns and the standard
guard interval, when disabled, is …

Enumeration

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.31

wsAPRadioSTBCMode

The Space Time Block Code (STBC) Mode enables the AP to send the
same data stream on multiple antennas at the same time. This is
different from MIMO where the data stream is divided between
two antennas.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.32

wsAPRadioMulticastTxRate

Indicates the data rate AP will send multicast
data to its client stations represented by a count from
2 - 127, corresponding to data rates in multiples of
500 kbit/s from 1 Mbit/s to 63.5 Mbit/s. 0 represents
automatic…

Integer32

Constraints:
range: 0-0
range: 2-127

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.33

wsAPRadioAPSDMode

Automatic Power Save Delivery Mode.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.34

wsAPRadioNoAckMode

Don't send acknowledgement to correctly received frames.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.35

wsAPRadioResourceMeasEnabled

Flag to enable/disable Radio Resource Management (RRM) as
defined in the IEEE 802.11k specification. RRM allows wireless
clients to request adjustments and report conditions regarding
channel load and neighbor detection.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.36

wsAPRadioQOSEDCATemplate

This object indicates the QOS template choice in effect for the profile and radio.

Enumeration

Enumerated Values:

0	custom
1	factory-default
2	voice

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.37

wsAPRadioMinTxPower

Minimum Transmit Power that can be set by APA on the radio.
Default Value is 20% for 2.4Ghz Radio and 100% for 5Ghz radio.

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.207.8.42.8.34.3.3.1.38

wsAPProfileRadioSupportedRatesTable

table

.1.3.6.1.4.1.207.8.42.8.34.3.4 · 1 row entry · 2 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPProfileRadioSupportedRatesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPProfileRadioSupportedRatesTable'

This table represents the supported data rates by AP Profile.

wsAPProfileRadioSupportedRatesEntry row .1.3.6.1.4.1.207.8.42.8.34.3.4.1

Each entry in this table represents supported data rate.

Indexes

wsAPProfileId wsAPRadioInterface wsSupportedDataRate

Column Syntax OID

wsSupportedDataRate

Indicates the data rate, AP will actually support
in setting up communications with client stations
represented by a count from 2 - 127, corresponding
to data rates in multiples of 500 kbit/s from 1 Mbit/s
to 63.5 Mbit/…

Integer32

Constraints:
range: 2-127

.1.3.6.1.4.1.207.8.42.8.34.3.4.1.1

wsAPProfileRadioSupportedDataMode

Displays supported data rate by an AP Profile.
Supported rates by an AP Profile depends on
physical mode of the radio.

Enumeration

Enumerated Values:

1	supported
2	not-supported

.1.3.6.1.4.1.207.8.42.8.34.3.4.1.2

wsAPProfileRadioBasicRatesTable

table

.1.3.6.1.4.1.207.8.42.8.34.3.5 · 1 row entry · 2 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPProfileRadioBasicRatesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPProfileRadioBasicRatesTable'

This table represents the basic data rates advertised
by an AP Profile.Stations connecting to this AP must
support this set of data rates.

wsAPProfileRadioBasicRatesEntry row .1.3.6.1.4.1.207.8.42.8.34.3.5.1

Each entry in this table represents basic data rate.

Indexes

wsAPProfileId wsAPRadioInterface wsBasicDataRate

Column Syntax OID

wsBasicDataRate

Indicates the basic data rate, AP will actually advertise
to its client stations represented by a count from
2 - 127, corresponding to data rates in multiples of
500 kbit/s from 1 Mbit/s to 63.5 Mbit/s.
For Example :
Su…

Integer32

Constraints:
range: 2-127

.1.3.6.1.4.1.207.8.42.8.34.3.5.1.1

wsAPProfileRadioBasicDataMode

Displays basic data rate advertised by an AP Profile.
Basic rate depends on physical mode of the radio.

Enumeration

Enumerated Values:

1	basic
2	not-basic

.1.3.6.1.4.1.207.8.42.8.34.3.5.1.2

wsAPProfileVAPTable

table

.1.3.6.1.4.1.207.8.42.8.34.3.6 · 1 row entry · 3 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPProfileVAPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPProfileVAPTable'

This table is about VAP profile configuration. When
AP profile entry is created, corresponding eight VAP
entries will get created for each radio. When AP Profile
entry is get deleted, corresponding VAP entries will be
deleted automatically.

wsAPProfileVAPEntry row .1.3.6.1.4.1.207.8.42.8.34.3.6.1

Each entry in this table represents VAP profile.

Indexes

wsAPProfileId wsAPRadioInterface wsVAPId

Column Syntax OID

wsVAPId

Index of the VAP with respect to the radio
interface.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.42.8.34.3.6.1.1

wsVAPMode

Flag to enable/disable VAP. VAP0 can not be disabled.
In order to disable VAP0, radio must be turned off.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.6.1.2

wsVAPNetworkId

Network configuration assigned to the VAP. By default,
VAP 0 to 7 are assigned to Network Ids 1 to 8 in order.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.207.8.42.8.34.3.6.1.3

wsAPProfileQOSTable

table

.1.3.6.1.4.1.207.8.42.8.34.3.7 · 1 row entry · 9 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPProfileQOSTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPProfileQOSTable'

This table displays QOS configuration. Enhanced
Distributed Channel Access(EDCA) parameters of an AP
affect downstream traffic from AP to the client station.
Station EDCA parameters affect upstream traffic from the
client station to an AP. Creation of AP Profile creates
corresponding four qos profiles with default
values for each radio. Deletion of AP Profile deletes the
corresponding QOS entries in this table.

wsAPProfileQOSEntry row .1.3.6.1.4.1.207.8.42.8.34.3.7.1

Each entry in this table represents QOS profile.

Indexes

wsAPProfileId wsAPRadioInterface wsQOSQueueId

Column Syntax OID

wsQOSQueueId

This object indicates QOS Queue Id.

Enumeration

Enumerated Values:

0	voice
1	video
2	besteffort
3	background

.1.3.6.1.4.1.207.8.42.8.34.3.7.1.1

wsAPEDCAAIFS

Specifies the wait time for data frames.
The default values for each QOS Id is
mentioned below:
voice(0) - 1 msec
video(1) - 1 msec
besteffort(2) - 3 msec
background(3) - 7 msec

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.42.8.34.3.7.1.2

wsAPEDCAMinContentionWindow

Specifies the upper limit of a range from
which the initial random backoff wait time is
determined.
The default values for each QOS Id is
mentioned below:
voice(0) - 3 msec
video(1) - 7 msec
besteffort(2) - …

Enumeration

Enumerated Values:

1	one
3	three
7	seven
15	fifteen
31	thirty-one
63	sixty-three
127	onetwenty-seven
255	twofifty-five
511	fivehundred-eleven
1023	onethousand-twentythree

.1.3.6.1.4.1.207.8.42.8.34.3.7.1.3

wsAPEDCAMaxContentionWindow

Specifies the upper limit for the doubling of the
random backoff value, doubling continues until
either the data frame is sent or this value is
reached.
The default values for each QOS Id is
mentioned below:
voice(0…

Enumeration

Enumerated Values:

1	one
3	three
7	seven
15	fifteen
31	thirty-one
63	sixty-three
127	onetwenty-seven
255	twofifty-five
511	fivehundred-eleven
1023	onethousand-twentythree

.1.3.6.1.4.1.207.8.42.8.34.3.7.1.4

wsAPEDCAMaxBurst

Specifies the maximum burst length allowed for
packet bursts on the wireless network.
The default values for each QOS Id is
mentioned below:
voice(0) - 1500 micro sec
video(1) - 3000 micro sec
besteffort(2) …

Integer32

Constraints:
range: 0-999900

.1.3.6.1.4.1.207.8.42.8.34.3.7.1.5

wsStationEDCAAIFS

Specifies the wait time for data frames.
The default values for each QOS Id is
mentioned below:
voice(0) - 2 msec
video(1) - 2 msec
besteffort(2) - 3 msec
background(3) - 7 msec

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.42.8.34.3.7.1.6

wsStationEDCAMinContentionWindow

Specifies the upper limit of a range from
which the initial random backoff wait time is
determined for station.
The default values for each QOS Id is
mentioned below:
voice(0) - 3 msec
video(1) - 7 msec
best…

Enumeration

Enumerated Values:

1	one
3	three
7	seven
15	fifteen
31	thirty-one
63	sixty-three
127	onetwenty-seven
255	twofifty-five
511	fivehundred-eleven
1023	onethousand-twentythree

.1.3.6.1.4.1.207.8.42.8.34.3.7.1.7

wsStationEDCAMaxContentionWindow

Enumeration

Enumerated Values:

1	one
3	three
7	seven
15	fifteen
31	thirty-one
63	sixty-three
127	onetwenty-seven
255	twofifty-five
511	fivehundred-eleven
1023	onethousand-twentythree

.1.3.6.1.4.1.207.8.42.8.34.3.7.1.8

wsStationEDCATXOPLimit

Specifies an interval of the time when a Wireless
Multimedia Extensions(WME) client station has the
right to initiate transmissions on to the wireless medium.
The default values for each QOS Id is
mentioned below:
…

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.42.8.34.3.7.1.9

wsNetworkTable

table

.1.3.6.1.4.1.207.8.42.8.34.3.8 · 1 row entry · 38 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsNetworkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsNetworkTable'

The following parameters can be configured for each
network. A network may be assigned to one or more VAPs
within an AP configuration profile. The first eight
networks are created with default values, and cannot be deleted.

wsNetworkEntry row .1.3.6.1.4.1.207.8.42.8.34.3.8.1

Each entry in this table is associated with a unique network Id.

Indexes

wsNetworkId

Column Syntax OID

wsNetworkId

Network Id used to uniquely identify the network.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.1

wsNetworkIdRowStatus

Add Network ID to the network configuration table.
The first 16 network configurations are created by default,
they are applied to VAP-0 through VAP-15 in order on each
radio when a new AP configuration profile is creat…

wsNetworkMACAuthenticationMode

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.2

wsNetworkSSID

This object indicates Service Set ID specific to this Network.
The first network is configured with a default SSID 'Guest Network',
the rest of the networks have default SSIDs assigned based on the Network Id.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.3

wsNetworkDefaultVLANId

Default VLAN Id assigned to the Network. The default VLAN
is used if RADIUS based authentication is not configured for
the network or the RADIUS server does not return a VLAN for
a specific client.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.4

wsNetworkHideSSIDMode

Flag to enable/disable inclusion of SSID in
AP beacons.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.5

wsNetworkDenyBcastMode

If client broadcasts probe requests to all available
SSIDs this option controls whether or not the system
will respond to the probe request. The 'disable' mode
means that the system responds.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.6

This object indicates mode to disable, or enable and specify lookup method for
authentication via client MAC address.

Enumeration

Enumerated Values:

1	local
2	radius
3	disable

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.10

wsNetworkRadiusAccountingMode

Flag to enable/disable RADIUS accounting authentication
for users on this network.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.14

wsNetworkSecurityMode

Specifies authentication and encryption mode on
this network.

Enumeration

Enumerated Values:

1	none
2	wepStatic
3	wep802dot1x
4	wpaPersonal
5	wpaEnterprise

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.15

wsNetworkWPAVersionsSupported

If Wi-Fi Protected Access(WPA) encryption mode is enabled,
this object indicates the versions of WPA allowed by
clients on this network.

Enumeration

Enumerated Values:

1	wpa
2	wpa2
3	both

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.16

wsNetworkWPACipherSuites

If WPA encryption mode is enabled, this object indicates which
encryption solutions to use for WPA clients.

Enumeration

Enumerated Values:

1	tkip
2	ccmp
3	both

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.17

wsNetworkWPAKeyType

If WPA-SharedKey security mode is enabled, this object specifies
the type of the WPA key configured. Only ascii key type
is supported for this release.

Enumeration

Enumerated Values:

ascii

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.18

wsNetworkWPAKey

If WPA-SharedKey security mode is enabled, this object specifies
the pre-shared secret for WPA clients.
For ASCII - 8-63 characters.

OctetString

Constraints:
range: 8-63

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.19

wsNetworkWPA2PreAuthenticationMode

If WPA2 encryption is enabled, flag to enable/disable
pre-authentication support for roaming WPA2 clients.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.20

wsNetworkWPA2PreAuthenticationLimit

If WPA2 pre-authentication is enabled, this object specifies a
limit on the number of APs within the peer group
to which one client is allowed to be pre-authenticate.

Integer32

Constraints:
range: 0-192

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.21

wsNetworkWPA2RoambackKeyCacheHoldtime

Length of time in minutes a PMK will be cached by an AP after the client
using this PMK has roamed away from this AP. Length of time
a PMK will be cached by an AP after the PMK has been received
from the WS. After this …

Integer32

Constraints:
range: 1-1440

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.23

wsNetworkStaticWEPAuthenticationMode

Indicates security configuration for static WEP.

Enumeration

Enumerated Values:

1	openSystem
2	sharedKey
3	both

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.24

wsNetworkUseWEPTransferKeyIndex

If wsNetSecurityMode is wepSharedKey, this object indicates
which Wired Equivalent Privacy(WEP) algorithm network
will use for encryption.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.25

wsNetworkWEPKeyType

If WEP-SharedKey security mode is enabled, this object specifies
the type WEP key configured.

Enumeration

Enumerated Values:

1	ascii
2	hex

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.26

wsNetworkWEPKeyLength

If WEP-SharedKey security mode is enabled, this object specifies
number of bits for the WEP key.

Enumeration

Enumerated Values:

64	sixty-four
128	one-twentyeight

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.27

wsNetworkWEPKey1

If WEP-SharedKey security mode is enabled, this object specifies
the key for WEP clients.
Minimum characters required for key based on key
type/length are:
For ASCII/64 - 5 characters
ASCII/128 - 13 character…

OctetString

Constraints:
range: 0-0
range: 5-32

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.28

wsNetworkWEPKey2

OctetString

Constraints:
range: 0-0
range: 5-32

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.29

wsNetworkWEPKey3

If WEP-SharedKey security mode is enabled, specifies
the key for WEP clients.
Minimum characters required for key based on key
type/length are:
For ASCII/64 - 5 characters
ASCII/128 - 13 characters
HEX/64…

OctetString

Constraints:
range: 0-0
range: 5-32

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.30

wsNetworkWEPKey4

OctetString

Constraints:
range: 0-0
range: 5-32

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.31

wsClearNetworkEntry

This is an action object. Setting this object to
enable will set Network Id configuration to default
configuration. Read on this object will always return disable.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.33

wsNetworkRedirectModedeprecated

Specifies the redirect mode on
this network.

Enumeration

Enumerated Values:

1	none
2	http

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.34

wsNetworkRedirectURLdeprecated

This object indicates HTTP Redirect URL on the Network Id.

OctetString

Constraints:
range: 0-127

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.35

wsIfNumber

A unique value to identify the wireless network interface.

wsNetworkAuthRadiusServerName

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.36

The name of the RADIUS server used for client
authentications.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.37

wsNetworkAuthRadiusServerConfiguredStatus

Indicates whether the specified named RADIUS Authentication
server is configured in the RADIUS Client configuration.

Enumeration

Enumerated Values:

1	not-configured
2	configured

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.38

wsNetworkAcctRadiusServerName

The name of the RADIUS server used for reporting wireless
client associations and disassociations.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.39

wsNetworkAcctRadiusServerConfiguredStatus

Indicates whether the specified named RADIUS Accounting
server is configured in the RADIUS Client configuration.

Enumeration

Enumerated Values:

1	not-configured
2	configured

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.40

wsUseNetworkRadiusConfig

This flag controls whether the VAP uses the network RADIUS
configuration or global RADIUS configuration. When enabled,
network RADIUS configuration shall be used.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.41

wsNetworkDistTunnelMode

Flag to enable/disable Distributed Tunneling for this
Network.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.42

wsNetworkBcastKeyRefreshRate

The 802.1x broadcastkey refresh rate command specifies the interval after
which the broadcast keys are changed.

Unsigned32

Constraints:
range: 0-86400

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.43

wsNetworkSessionKeyRefreshRate

The 802.1x SessionKey refresh rate command specifies the interval after
which the Unicast session keys are changed. This is applicable only dynamic WEP and
WPA Enterprise modes.Valid values are 0 and from 30-86400.

wsNetworkARPSuppressionMode

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.44

Flag to enable/disable Wireless ARP Suppression for this Network.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.45

wsNetworkBandSteerMode

Configure band steering on this VAP. To have band steering operationally enabled,
the following conditions should be met:
1. SSIDs on both VAPs should match.
2. One radio should be in the 2.4-GHz band, and the other s…

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.207.8.42.8.34.3.8.1.46

wsNetworkClientQosTable

table

.1.3.6.1.4.1.207.8.42.8.34.3.9 · 1 row entry · 11 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsNetworkClientQosTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsNetworkClientQosTable'

The following parameters can be configured for each
network. This table extends the wsNetworkTable definition.

wsNetworkClientQosEntry row .1.3.6.1.4.1.207.8.42.8.34.3.9.1

Each entry in this table is associated with a unique network ID,
and defines its default client QoS parameters for a managed AP.
These parameters are used for any wireless client on the designated
network that does not …

Indexes

No indexes recorded

Column Syntax OID

wsNetworkClientQosBandwidthLimitDown

Maximum bandwidth rate allowed for the wireless down (outbound)
direction from AP to client for this network, thus controlling
the maximum receive rate from the AP for a wireless client. This
parameter is specified in …

wsNetworkClientQosBandwidthLimitUp

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.3.9.1.1

Maximum bandwidth rate allowed for the wireless up (inbound)
direction from client to AP for this network, thus controlling
the maximum send rate to the AP for a wireless client. This
parameter is specified in bits-per…

wsNetworkClientQosAccessControlDownType

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.3.9.1.2

Access list type used for the wireless down (outbound) direction from
AP to client for this network. Setting this object usually requires
that the wsNetworkClientQosAccessControlDownName object also be set at
the same …

Enumeration

Enumerated Values:

1	none
2	ip
3	mac
4	ipv6

.1.3.6.1.4.1.207.8.42.8.34.3.9.1.3

wsNetworkClientQosAccessControlDownName

Name of the access list to use in accordance with the
wsNetworkClientQosAccessControlDownType as follows:

none(1) - This object is not used and must not be set.

ip(2) - This specifies an …

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.207.8.42.8.34.3.9.1.4

wsNetworkClientQosAccessControlUpType

Access list type used for the wireless up (inbound) direction from
client to AP for this network. Setting this object usually requires
that the wsNetworkClientQosAccessControlUpName object also be set at
the same time …

Enumeration

Enumerated Values:

1	none
2	ip
3	mac
4	ipv6

.1.3.6.1.4.1.207.8.42.8.34.3.9.1.5

wsNetworkClientQosAccessControlUpName

Name of the access list to use in accordance with the
wsNetworkClientQosAccessControlUpType as follows:

none(1) - This object is not used and must not be set.

ip(2) - This specifies an IP…

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.207.8.42.8.34.3.9.1.6

wsNetworkClientQosDiffservPolicyDownType

DiffServ policy type used for the wireless down (outbound) direction from
AP to client for this network. Setting this object usually requires
that the wsNetworkClientQosDiffservPolicyDownName object also be set at
the …

Enumeration

Enumerated Values:

1	none
2	in

.1.3.6.1.4.1.207.8.42.8.34.3.9.1.7

wsNetworkClientQosDiffservPolicyDownName

Name of the DiffServ policy to use in accordance with the
wsNetworkClientQosDiffservPolicyDownType as follows:

none(1) - This object is not used and must not be set.

in(2) - This is an al…

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.207.8.42.8.34.3.9.1.8

wsNetworkClientQosDiffservPolicyUpType

DiffServ policy type used for the wireless up (inbound) direction from
client to AP for this network. Setting this object usually requires
that the wsNetworkClientQosDiffservPolicyUpName object also be set at
the same …

Enumeration

Enumerated Values:

1	none
2	in

.1.3.6.1.4.1.207.8.42.8.34.3.9.1.9

wsNetworkClientQosDiffservPolicyUpName

Name of the DiffServ policy to use in accordance with the
wsNetworkClientQosDiffservPolicyUpType as follows:

none(1) - This object is not used and must not be set.

in(2) - This is an alph…

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.207.8.42.8.34.3.9.1.10

wsNetworkClientQosMode

Flag to enable/disable AP quality-of-service for wireless clients
on this network.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.9.1.11

wsAPProfileRadioSupportedChannelsTable

table

.1.3.6.1.4.1.207.8.42.8.34.3.10 · 1 row entry · 1 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPProfileRadioSupportedChannelsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPProfileRadioSupportedChannelsTable'

This table represents the supported channels by AP Profile.

wsAPProfileRadioSupportedChannelsEntry row .1.3.6.1.4.1.207.8.42.8.34.3.10.1

Each entry in this table represents a supported channel.

Indexes

wsAPProfileId wsAPRadioInterface wsSupportedChannel

Column	Syntax	OID
wsSupportedChannel Indicates a channel currently supported by the radio for use with client connections. The set of supported channel numbers is determined by country code, radio mode, and in the case of modes that are compatible with 80…	Integer32 Constraints: `range: 1-255`	`.1.3.6.1.4.1.207.8.42.8.34.3.10.1.1`

wsAPProfileRadioEligibleChannelsTable

table

.1.3.6.1.4.1.207.8.42.8.34.3.11 · 1 row entry · 2 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPProfileRadioEligibleChannelsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPProfileRadioEligibleChannelsTable'

This table represents the channels of an AP profile that are eligible for automatic channel selection.

wsAPProfileRadioEligibleChannelsEntry row .1.3.6.1.4.1.207.8.42.8.34.3.11.1

Each entry in this table represents an eligible channel.

Indexes

wsAPProfileId wsAPRadioInterface wsEligibleChannel

Column Syntax OID

wsEligibleChannel

Indicates a channel currently eligible for automatic channel
selection by the radio for use with client connections. The
set of eligible channel numbers is a subset of the channels
supported by the radio in its current…

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.207.8.42.8.34.3.11.1.1

wsEligibleChannelRowStatus

The eligible channel status.
Supported values:
active(1) - valid instance
createAndGo(4) - creates a new instance
destroy(6) - removes an instance

wsAPRadioTspecVoiceAcmMode

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.207.8.42.8.34.3.11.1.2

wsAPProfileRadioTspecTable

table

.1.3.6.1.4.1.207.8.42.8.34.3.12 · 1 row entry · 9 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPProfileRadioTspecTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPProfileRadioTspecTable'

This table contains TSPEC parameters that can be configured
within an AP Profile per radio interface.

wsAPProfileRadioTspecEntry row .1.3.6.1.4.1.207.8.42.8.34.3.12.1

Each entry in this table represents TSPEC parameters
that can be configured per radio interface within an
AP profile. These entries augment the wsAPProfileRadioEntry
definition for TSPEC configuration.

Indexes

No indexes recorded

Column Syntax OID

wsAPRadioTspecMode

The overall TSPEC operational mode for this radio.
This object must be set to enable(1) for any of the
other TSPEC ACM configuration parameters defined in
this table row to have an effect. The default value
for this ob…

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.12.1.1

Regulates mandatory admission control for the voice
access category (AC). When set to enable(1), the
voice AC may only be used by WMM-compliant client
stations that have successfully established a TSPEC
for this AC.
…

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.12.1.2

wsAPRadioTspecVideoAcmMode

Regulates mandatory admission control for the video
access category (AC). When set to enable(1), the
video AC may only be used by WMM-compliant client
stations that have successfully established a TSPEC
for this AC.
…

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.12.1.3

wsAPRadioTspecVoiceAcmLimit

Defines the maximum amount of wireless bandwidth utilization to admit
for the voice access category. TSPEC requests that would cause
this limit to be exceeded are rejected.

Note that this value establish…

Unsigned32

Constraints:
range: 0-70

.1.3.6.1.4.1.207.8.42.8.34.3.12.1.4

wsAPRadioTspecVideoAcmLimit

Defines the maximum amount of wireless bandwidth utilization to admit
for the video access category. TSPEC requests that would cause
this limit to be exceeded are rejected.

Note that this value establish…

Unsigned32

Constraints:
range: 0-70

.1.3.6.1.4.1.207.8.42.8.34.3.12.1.5

wsAPRadioTspecRoamReserveLimit

Defines the portion of the wsAPRadioTspecVoiceAcmLimit and
wsAPRadioTspecVideoAcmLimit object values to hold in reserve
for roaming clients only.

If this value exceeds the current value in either of those…

Unsigned32

Constraints:
range: 0-70

.1.3.6.1.4.1.207.8.42.8.34.3.12.1.6

wsAPRadioTspecApInactivityTimeout

Specifies the amount of time that an active traffic stream (TS)
in the downlink direction may be idle, from the perspective of
the AP, before it is deleted by the AP.

For a bidirectional TS, both the wsAP…

Unsigned32

Constraints:
range: 0-120

.1.3.6.1.4.1.207.8.42.8.34.3.12.1.7

wsAPRadioTspecStaInactivityTimeout

Specifies the amount of time that an active traffic stream (TS)
in the uplink direction may be idle, from the perspective of
the AP, before it is deleted by the AP.

For a bidirectional TS, both the wsAPRa…

Unsigned32

Constraints:
range: 0-120

.1.3.6.1.4.1.207.8.42.8.34.3.12.1.8

wsAPRadioTspecLegacyWmmQueueMapMode

When enabled, the AP allows intermixing of legacy traffic
with Wi-Fi Multimedia (WMM) traffic on access category
queues that are operating according to admission control
mandatory (ACM) rules.

This mode i…

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.3.12.1.9

wsAPProfileRadioMCSIndexTable

table obsolete

.1.3.6.1.4.1.207.8.42.8.34.3.13 · 1 row entry · 2 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPProfileRadioMCSIndexTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPProfileRadioMCSIndexTable'

This table contains MCS indices that can be configured
within an AP Profile per radio interface.

wsAPProfileRadioMCSIndexEntry row .1.3.6.1.4.1.207.8.42.8.34.3.13.1

Each entry in this table represents an MCS index that can
be configured per radio interface within an AP profile.

Indexes

wsAPProfileId wsAPRadioInterface wsAPRadioMCSIndexValue

Column Syntax OID

wsAPRadioMCSIndexValueobsolete

Indicates an index value available for use with the Modulation
and Coding Scheme (MCS) for 802.11n connections. Not all radios
support index values from 16 to 23.

Unsigned32

Constraints:
range: 0-23

.1.3.6.1.4.1.207.8.42.8.34.3.13.1.1

wsAPRadioMCSIndexAvailableobsolete

Indicates that the associated index value has or has not been
configured for use with the Modulation and Coding Scheme (MCS)
for 802.11n connections.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.207.8.42.8.34.3.13.1.2

wsAPImageTypeFileTable

table

.1.3.6.1.4.1.207.8.42.8.34.4.2 · 1 row entry · 2 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPImageTypeFileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPImageTypeFileTable'

The AP image type capability table contain parameters that
are configurable for each image type download.

wsAPImageTypeFileEntry row .1.3.6.1.4.1.207.8.42.8.34.4.2.1

Each entry provides image type capability details for each AP image
type supported by the WS.

Indexes

wsChannelPlanOperatingStatus

Column	Syntax	OID
wsAPImageFilePath Indicates the file path on the server to use for an AP code download request.	OctetString Constraints: `range: 0-96`	`.1.3.6.1.4.1.207.8.42.8.34.4.2.1.1`
wsAPImageFileName Indicates file on the server to use for an AP code download request.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.207.8.42.8.34.4.2.1.2`

wsChannelPlanTable

table

.1.3.6.1.4.1.207.8.42.8.34.5.1 · 1 row entry · 22 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsChannelPlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsChannelPlanTable'

This table displays the channel plan parameters.

wsChannelPlanEntry row .1.3.6.1.4.1.207.8.42.8.34.5.1.1

Each entry in this table will indicate the channel
plan parameters for specific radio frequency.

Indexes

wsChannelPlan

Column Syntax OID

wsChannelPlan

This object indicates the whether the channel plan
is for ieee802dot11bORgn or ieee802dot11an.

Enumeration

Enumerated Values:

1	ieee802dot11an
2	ieee802dot11bORgn

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.1

wsChannelPlanMode

Indicates mode of computing and applying channel adjustments
for managed AP radios operating in 2.4Ghz and 5Ghz band.

Enumeration

Enumerated Values:

1	manual
2	interval
3	time

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.2

wsChannelPlanInterval

If channel plan mode is interval, this object indicates
a regular interval in minutes at which to compute and apply a new
channel adjustments.

Integer32

Constraints:
range: 10-1440

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.3

wsChannelPlanTime

If channel plan mode is time, this object indicates the next
scheduled time in minutes at which to compute and apply a
new channel adjustments. Zero minutes stands for mid-night.

Integer32

Constraints:
range: 0-1440

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.4

wsChannelPlanHistoryDepthobsolete

Indicates the maximum number of previously applied channel
algorithm iterations stored on the controller and used in the
next channel adjustment computation.

Integer32

Constraints:
range: 0-10

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.5

Indicates whether or not automatic channel adjustment
is operating for managed AP radios operating in
2.4Ghz and 5Ghz band.

Enumeration

Enumerated Values:

1	active
2	inActive

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.6

wsChannelPlanLastIterationStatusobsolete

Indicates the current iteration of channel plan
adjustments for managed AP radio.

Integer32

Constraints:
range: 0-10

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.7

wsChannelPlanManualAction

This action object is used to:
- Run the Proposed Channel Adjustment alogorithm
- Abort the channel plan.
- Clear the calculated 2.4Ghz and 5Ghz channel plan.
Read on this object will always return none.

Enumeration

Enumerated Values:

1	none
2	start
3	abort
4	clear

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.8

wsChannelPlanManualStatusobsolete

Indicates the current state of a manual request
to compute or apply proposed channel adjustments.

Enumeration

Enumerated Values:

1	none
2	algorithm-in-progress
3	algorithm-complete
4	apply-in-process
5	apply-complete

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.9

wsChannelPlanLastAlgorithmTime

The time since the last channel plan algorithm ran.

wsChannelPlanChangeThreshold

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.10

The minimum signal strength (dBm) with which a neighbor must be detected
on the current operational channel in order for the channel plan to consider
moving away from the current channel.

Integer32

Constraints:
range: -99--1

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.11

wsChannelPlanIgnoreUnamangedAPs

When enabled, the channel plan does not take into account the interfering unmanaged APs.
Only managed APs are used for generating the channel plan.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.12

wsChannelPlanNumOfRadios

Number of radios operating in the band.
This includes the radios with static channel assignment.

wsChannelPlanNumOfRadiosAnalysed

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.13

Indicates the number of AP radios analyzed by the channel algorithm.
This includes APs that operate on static channels.This value is reset at
the start of each channel plan cycle.

wsChannelPlanNumOfRadiosScanned

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.14

Indicates the number of AP radios for which a Channel Plan Request
has been sent by the channel algorithm.This value is reset at
the start of each channel plan cycle.

wsChannelPlanNumOfRadiosChanged

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.15

Indicates the number of AP radios whose operating channel changed.
This includes APs whose channel is changed to the same channel as
the original operating channel.This value is reset at
the start of each channel plan c…

wsChannelPlanNumOfRadiosChangedToOrigChannel

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.16

Indicates the number of AP radios that scanned the candidate channels but
ended on the same channel.This value is reset at
the start of each channel plan cycle.

wsChannelPlanEstimatedTimeOfCompletion

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.17

The time for the estimated time of completion of the current channel plan cycle.
When the channel plan is inactive the time stamp is zeroed out.

wsChannelPlanPercentageComplete

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.18

During the channel plan cycle this parameter is the percentage of the
AP radios that have been analyzed. When the channel plan is inactive this value is 0.

wsChannelPlanChangeThresholdAdj

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.19

The number of dBm by which to reduce the Channel Change Threshold for detected managed APs based on the Transmit Power of the detected managed APs.

Integer32

Constraints:
range: 0-5

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.20

wsChannelPlanManagedAPFailureInterval

The number of seconds to wait before triggering the channel plan after a managed AP fails.

Integer32

Constraints:
range: 60-600

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.21

wsChannelPlanRunOnManagedApFailure

When this administrative parameter is enabled, the controller runs ACA algorithm after it detects that a managed AP failed.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.5.1.1.22

wsChannelPlanHistoryTable

table obsolete

.1.3.6.1.4.1.207.8.42.8.34.5.2 · 1 row entry · 6 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsChannelPlanHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsChannelPlanHistoryTable'

This table contains parameters related to
channel plan algorithm history, each entry
indicates a previously computed and applied
channel adjustment for the specified iteration.
The maximum number of channel adjustment
iterations displayed is based on the 802.11b/g or 802.11a
channel plan history depth.

wsChannelPlanHistoryEntry row .1.3.6.1.4.1.207.8.42.8.34.5.2.1

Each entry in this table represents channel
plan history for WS managed AP radio.

Indexes

wsChannelPlanHistory wsChannelPlanAPMacAddress wsChannelPlanAPRadioInterface

Column Syntax OID

wsChannelPlanHistoryobsolete

This object indicates the whether the channel adjustment
is for 2.4Ghz or 5Ghz band.

Enumeration

Enumerated Values:

1	ieee802dot11an
2	ieee802dot11bORgn

.1.3.6.1.4.1.207.8.42.8.34.5.2.1.1

wsChannelPlanAPMacAddressobsolete

The Ethernet address of the AP.

wsChannelPlanManual wsChannelPlanManualMacAddress wsChannelPlanManualAPRadioInterface

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.5.2.1.2

wsChannelPlanAPRadioInterfaceobsolete

Indicates the radio interface for channel assignment.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.5.2.1.3

wsChannelPlanAPLocationobsolete

A descriptive name of the AP, usually represented by its location.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.5.2.1.4

wsChannelPlanAPHistoryIterationobsolete

This field indicates the iteration of the channel
plan algorithm for this channel adjustment,
the maximum history depth is configurable.
This history prevents the same APs from being
changed time after time.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.207.8.42.8.34.5.2.1.5

wsChannelPlanAPChannelobsolete

Indicates the previously applied channel for this
radio.

Integer32

Constraints:
range: 1-1
range: 6-6
range: 11-11

.1.3.6.1.4.1.207.8.42.8.34.5.2.1.6

wsChannelPlanManualProposedAdjustmentTable

table obsolete

.1.3.6.1.4.1.207.8.42.8.34.5.3 · 1 row entry · 5 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsChannelPlanManualProposedAdjustmentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsChannelPlanManualProposedAdjustmentTable'

This table contains parameters related to
proposed channel plan adjustment. These parameters
are applicable only when channel plan mode
is manual.

wsChannelPlanManualProposedAdjustmentEntry row .1.3.6.1.4.1.207.8.42.8.34.5.3.1

Each entry in this table represents proposed
channel plan adjustment.

Indexes

Column Syntax OID

wsChannelPlanManualobsolete

This object indicates the whether the channel plan
is for 2.4Ghz or 5Ghz band.

Enumeration

Enumerated Values:

1	ieee802dot11an
2	ieee802dot11bORgn

.1.3.6.1.4.1.207.8.42.8.34.5.3.1.1

wsChannelPlanManualMacAddressobsolete

The Ethernet address of the AP.

wsPowerManualProposedAdjustmentAPMacAddress wsPowerManualProposedAdjustmentAPRadioInterface

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.5.3.1.2

wsChannelPlanManualAPRadioInterfaceobsolete

Indicates the radio interface for channel assignment.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.5.3.1.3

wsChannelPlanManualCurrentChannelobsolete

Indicates the current operating channel for this
radio.

Integer32

Constraints:
range: 1-13
range: 36-36
range: 40-40
range: 44-44
range: 48-48
range: 52-52
range: 56-56
range: 60-60
range: 64-64

.1.3.6.1.4.1.207.8.42.8.34.5.3.1.4

wsChannelPlanManualNewChannelobsolete

Indicates new channel assignment for this
radio.

Integer32

Constraints:
range: 1-13
range: 36-36
range: 40-40
range: 44-44
range: 48-48
range: 52-52
range: 56-56
range: 60-60
range: 64-64

.1.3.6.1.4.1.207.8.42.8.34.5.3.1.5

wsPowerManualProposedAdjustmentTable

table obsolete

.1.3.6.1.4.1.207.8.42.8.34.5.8 · 1 row entry · 4 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsPowerManualProposedAdjustmentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsPowerManualProposedAdjustmentTable'

This table represents the proposed power adjustment
status parameters. These parameters are displayed
only when power adjustment mode is set to manual.
The administrator manually apply all of the proposed
power adjustments displayed.

wsPowerManualProposedAdjustmentEntry row .1.3.6.1.4.1.207.8.42.8.34.5.8.1

Each entry in this table represents the proposed
power adjustment status parameters.

Indexes

Column	Syntax	OID
wsPowerManualProposedAdjustmentAPMacAddressobsolete The Ethernet address of the AP.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.5.8.1.1`
wsPowerManualProposedAdjustmentAPRadioInterfaceobsolete Indicates the radio interface for power assignment.	Integer32 Constraints: `range: 1-2`	`.1.3.6.1.4.1.207.8.42.8.34.5.8.1.2`
wsPowerManualProposedAdjustmentAPCurrentTxPowerobsolete Indicates the current operating power for this radio from the last power plan computation. Even after the new power plan is applied, this object displays the old value as opposed to the actual power currently set into t…	Integer32 Constraints: `range: 1-100`	`.1.3.6.1.4.1.207.8.42.8.34.5.8.1.3`
wsPowerManualProposedAdjustmentAPNewTxPowerobsolete Indicates the new proposed power assignment for this radio.	Integer32 Constraints: `range: 1-100`	`.1.3.6.1.4.1.207.8.42.8.34.5.8.1.4`

wsChannelPlanPerRadioPerBandTable

table

.1.3.6.1.4.1.207.8.42.8.34.5.18 · 1 row entry · 16 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsChannelPlanPerRadioPerBandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsChannelPlanPerRadioPerBandTable'

This table contains the per band per radio channel plan status for a Managed AP.

wsChannelPlanPerRadioPerBandEntry row .1.3.6.1.4.1.207.8.42.8.34.5.18.1

Each entry in this table represents channel plan per band per radio status for WS managed AP.

Indexes

wsChannelPlanType wsChannelPlanAPMacAddr wsChannelPlanAPRadioIntf

Column Syntax OID

wsChannelPlanType

This object indicates the whether the channel plan
is for ieee802dot11bORgn or ieee802dot11an.

Enumeration

Enumerated Values:

1	ieee802dot11an
2	ieee802dot11bORgn

.1.3.6.1.4.1.207.8.42.8.34.5.18.1.1

wsChannelPlanAPMacAddr

The Ethernet address of the Managed AP.

wsChannelPlanAPCurrentChannel

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.5.18.1.2

wsChannelPlanAPRadioIntf

Indicates the radio interface for channel assignment.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.5.18.1.3

wsChannelPlanAPIsLocal

Flag Indicating whether the AP is managed by the cluster controller or a peer controller.

Enumeration

Enumerated Values:

0	peerSwitch
1	local

.1.3.6.1.4.1.207.8.42.8.34.5.18.1.4

Indicates the current operating channel for this
radio.

wsChannelPlanAPOldChannel

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.5.18.1.5

Channel on which this radio was operating before the channel change algorithm changed its channel.

wsChannelPlanAPStrongestOldSignal

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.5.18.1.6

The strongest signal detected on the old channel. This is the signal used in the channel selection decision.

wsChannelPlanAPStrongestNewSignal

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.42.8.34.5.18.1.7

The strongest signal detected on the new channel during the channel validation scan.
This is the signal used in the channel selection decision. If the algorithm does not
change the channel then this is the signal on the…

wsChannelPlanAPChannelChangeInd

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.42.8.34.5.18.1.8

Flag indicating whether the last channel plan cycle changed the channel for this radio.

Enumeration

Enumerated Values:

0	no
1	yes
2	wait

.1.3.6.1.4.1.207.8.42.8.34.5.18.1.9

wsChannelPlanAPReasonCode

The reason code indicating why the channel was changed or not changed for this radio.

Enumeration

Enumerated Values:

0	chanPlanNeverExecuted
1	channelIsStatic
2	oneEligibleChannel
3	detectedAPSignalBelowThresh
4	chanFoundWithLowInterference
5	chanNotFoundWithLowInterference
6	partOfWDSLink

.1.3.6.1.4.1.207.8.42.8.34.5.18.1.10

wsChannelPlanAPStrongestOldManagedAPandSignal

The MAC address and the signal strength of the strongest managed neighbor AP detected on the channel
before that channel was changed. The MAC address is the base MAC of the managed AP.

wsChannelPlanAPStrongestNewManagedAPandSignal

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.42.8.34.5.18.1.11

The MAC address and the signal strength of the strongest managed neighbor AP detected on the current
operating channel. The MAC address is the base MAC of the managed AP.

wsChannelPlanAPStrongestOldUnmanagedAPandSignal

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.42.8.34.5.18.1.12

The MAC address and the signal strength of the strongest unmanaged neighbor AP detected on the channel
before that channel was changed.

wsChannelPlanAPStrongestNewUnmanagedAPandSignal

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.42.8.34.5.18.1.13

The MAC address and the signal strength of the strongest unmanaged neighbor AP detected on the current
operating channel.

wsChannelPlanAPTimeSinceLastChannelChange

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.42.8.34.5.18.1.14

The UTC time since the channel was last changed by the channel plan algorithm..

wsChannelPlanAPLastChanScanDuration

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.42.8.34.5.18.1.15

Number of milliseconds that the AP spent scanning channels during the last channel plan cycle.
The scan time includes the operational channel scan, so the time may be non-zero even when the radio
did not change channels.

Integer32

Constraints:
range: 0-999999

.1.3.6.1.4.1.207.8.42.8.34.5.18.1.16

wsPowerPlanPerRadioTable

table

.1.3.6.1.4.1.207.8.42.8.34.5.19 · 1 row entry · 17 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsPowerPlanPerRadioTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsPowerPlanPerRadioTable'

This table contains the per radio Power Plan Status for a Managed AP .

wsPowerPlanPerRadioEntry row .1.3.6.1.4.1.207.8.42.8.34.5.19.1

Each entry in this table represents the per radio power plan status for WS managed AP.

Indexes

wsPowerPlanAPMacAddress wsPowerPlanAPRadioInterface

Column Syntax OID

wsPowerPlanAPMacAddress

The Ethernet address of the Managed AP.

wsPowerPlanAPRadioInterface

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.5.19.1.1

Indicates the radio interface of the Managed AP.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.5.19.1.2

wsPowerPlanAPIsLocal

Flag Indicating whether the AP is managed by the cluster controller or a peer controller.

Enumeration

Enumerated Values:

0	peerSwitch
1	local

.1.3.6.1.4.1.207.8.42.8.34.5.19.1.3

wsPowerPlanAPChannel

Channel on which the radio is operating. For sentry radios this field is set to sentry.
The disabled radios report None.

wsPowerPlanAPNumInterferingAPs

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.42.8.34.5.19.1.4

wsPowerPlanAPTxPower

The current operating power for this radio. Sentry radios and disabled radios report 0%.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.207.8.42.8.34.5.19.1.5

The number of APs managed by this cluster detected by this radio on the operational channel.

Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.207.8.42.8.34.5.19.1.6

wsPowerPlanAPNumInterferingVAPs

The number of VAPs managed by this cluster detected by this radio on the operational channel.

Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.207.8.42.8.34.5.19.1.7

wsPowerPlanAPStrongestDetectorAP

The base MAC address of the managed AP that detects this radio with the strongest signal.

wsPowerPlanAPStrongestDetectorRadio

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.5.19.1.8

The radio number of the managed AP that detects this radio with the strongest signal.

wsPowerPlanAPStrongestDetectorSignal

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.5.19.1.9

The strongest signal strength in dBm with which a managed neighbor detects this radio.

wsPowerPlanAPStrongestDetectedNeighbor

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.42.8.34.5.19.1.10

The MAC address of the AP that this radio detects with the strongest signal.

wsPowerPlanAPStrongestDetectedSignal

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.5.19.1.11

The signal strength with which this radio detects the strongest neighbor.

wsPowerPlanAPLastPwrAdjStatus

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.42.8.34.5.19.1.12

The status indicating whether the power was changed during the most recent cycle of the power adjustment algorithm.

Enumeration

Enumerated Values:

0	unchanged
1	increased
2	reduced

.1.3.6.1.4.1.207.8.42.8.34.5.19.1.13

wsPowerPlanAPLastPwrAdjReasonCode

The reason code indicating why the last power adjustment action was taken or not taken.

Enumeration

Enumerated Values:

0	powerPlanNeverExecuted
1	powerPlanRadioInSentryMode
2	powerPlanRadioAutoPowerDisable
3	powerPlanRadioPowerUnchanged
4	powerPlanRadioOperatingInMaxPower
5	powerPlanRadioOperatingInMinPower
6	powerPlanRadioMinPowerIs100
7	powerPlanRadioPowerIncreaseRequired
8	powerPlanRadioPowerDecreaseRequired
9	powerPlanRadioPowerAdjNone
10	powerPlanRadioPowerPartOfWDSLink

.1.3.6.1.4.1.207.8.42.8.34.5.19.1.14

wsPowerPlanAPNumPwrChanges

Number of transmit power changes done by the power plan algorithm for this radio.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.5.19.1.15

wsPowerPlanAPNumPwrInc

Number of transmit power increases done by the power plan algorithm for this radio.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.5.19.1.16

wsPowerPlanAPNumPwrDec

Number of transmit power reductions done by the power plan algorithm for this radio.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.5.19.1.17

wsPowerPlanPerProfileTable

table

.1.3.6.1.4.1.207.8.42.8.34.5.20 · 1 row entry · 6 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsPowerPlanPerProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsPowerPlanPerProfileTable'

This table contains the per profile power plan status.

wsPowerPlanPerProfileEntry row .1.3.6.1.4.1.207.8.42.8.34.5.20.1

Each entry in this table represents the per profile power plan status.

Indexes

wsPowerPlanProfileId

Column	Syntax	OID
wsPowerPlanProfileId Indicates the profile Id.	Integer32 Constraints: `range: 0-999`	`.1.3.6.1.4.1.207.8.42.8.34.5.20.1.1`
wsPowerPlanPerProfileAvgNumInterferingAPs The average number of managed radios detected by every operational mode radio that uses this profile. If the number of APs is greater than 999 then it is reported as 999..	Integer32 Constraints: `range: 0-999`	`.1.3.6.1.4.1.207.8.42.8.34.5.20.1.2`
wsPowerPlanPerProfileAvgNumInterferingVAPs The average number of managed virtual APs detected by every operational mode radio that uses this profile.	Integer32 Constraints: `range: 0-999`	`.1.3.6.1.4.1.207.8.42.8.34.5.20.1.3`
wsPowerPlanNumPwrChanges Number of transmit power changes done by the power plan algorithm for all radios in this profile.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.42.8.34.5.20.1.4`
wsPowerPlanNumPwrInc Number of transmit power increases done by the power plan algorithm for all radios in this profile.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.42.8.34.5.20.1.5`
wsPowerPlanNumPwrDec Number of transmit power reductions done by the power plan algorithm for all radios in this profile.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.42.8.34.5.20.1.6`

wsManagedAPStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.6.1 · 1 row entry · 34 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsManagedAPStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsManagedAPStatusTable'

This table contains status parameters for all APs managed by the controller.

wsManagedAPStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.6.1.1

Each entry in this table contains status parameters for
an AP managed by the controller. Controller can managed up to
48 APs at a time, with the actual maximum number
supported dependent on the CPU performance of the
co…

Indexes

wsManagedAPMacAddress

Column Syntax OID

wsManagedAPMacAddress

Ethernet address of the WS managed AP.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.1

wsManagedAPIpAddress

Network IP address of the managed AP.

wsManagedAPSoftwareVersion

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.2

wsManagedAPVendorId

Indicates vendor of the WS managed AP software. Broadcom vendor ID
is 1.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.3

Indicates software version of the WS managed AP.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.4

wsManagedAPHWType

Indicates hardware platform of the WS managed AP.

wsManagedAPDiscoveryReason

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.5

wsManagedAPSerialNumber

Indicates serial number of the WS managed AP.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.6

wsManagedAPPartNumber

Indicates hardware part number of the WS managed AP.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.7

Indicates discovery method used to detect the AP.

Enumeration

Enumerated Values:

1	ip-poll
2	peer-switch-initiated
3	switch-ip-configured-in-ap
4	switch-ip-obtained-via-dhcp
5	l2Discovery

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.8

wsManagedAPStatus

Indicates current state of an AP.

Enumeration

Enumerated Values:

1	discovered
2	authenticated
3	upgrading
4	managed
5	connection-failed
6	deleted

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.9

wsManagedAPAuthenticatedClients

Indicates total number of clients currently authenticated to
an AP.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.10

wsManagedAPSysUpTime

Indicates time in seconds since last power-on reset.

wsManagedAPProtocolVersion

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.11

wsManagedAPProfileId

The configuration profile currently applied
to the AP.

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.12

wsManagedAPProfileName

The descriptive name for the profile currently
applied to the AP.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.13

Indicates the protocol version supported
by the software on the AP.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.14

wsManagedAPCodeDownloadStatus

This indicates the current status of a code
download request for this AP.

Enumeration

Enumerated Values:

1	not-started
2	requested
3	code-transfer-in-progress
4	waiting-for-aps-to-download
5	aborted
6	nvram-update-in-progress
7	timed-out
8	failure

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.15

wsManagedAPLocation

A descriptive name for the AP, usually represented by location.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.16

wsManagedAPLastFailingConfigElement

Indicates the element Id of the last failing configuration
element.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.17

wsManagedAPConfigFailureErrMsg

Indicates an ASCII string filled in by the AP, containing
the error message.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.18

wsManagedAPReset

This is an action object. Setting this object to
enable will reset the AP. Read on this object will
always return disable.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.19

wsManagedAPResetStatus

This object gives status regarding the AP that
got reset.

Enumeration

Enumerated Values:

1	not-started
2	in-progress
3	success
4	failure

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.20

wsManagedAPFailedEntryPurge

This is an action object. Setting this object to
enable will purge the failed AP entry. Read on this
object will always return disable.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.21

wsManagedAPDebugPassword

Indicates password to be used for debugging managed AP. User should
enable debug mode to set debug password. If password is configured,
read on this object will return '*****'.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.22

wsManagedAPDebugMode

This is an action object. Enabling this object will
enable the telnet access to the managed AP.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.23

wsManagedAPDebugStatus

This object indicates the status of the debug action
requested when managed AP debug mode is set.

Enumeration

Enumerated Values:

1	not-started
2	requested
3	in-progress
4	success
5	failure

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.24

wsManagedAPAge

Time since last communication with an AP.

wsManagedAPManagingSwitch

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.25

This object indicates whether the AP is managed by
this controller or peer-controller.

Enumeration

Enumerated Values:

1	local-switch
2	peer-switch

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.26

wsManagedAPSwitchMacAddress

MAC address of the WS managing the AP.

wsManagedAPSwitchIpAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.27

IP address of the WS managing the AP.

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.28

wsManagedAPIpMask

Network IP mask of the managed AP.

wsManagedAPDistTunnelHomeAPClients

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.29

Number of clients using this AP as a Home AP. It is also the
number of clients that roamed away from this AP and are
tunneling data back to it.

wsManagedAPDistTunnelAssocAPClients

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.30

Number of clients using this AP as an association AP. It is also the
number of clients that roamed to this AP and are tunneling data
back to the Home AP.

wsManagedAPDistTunnelsTotal

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.31

Total number of APs to which this AP establishes
distributed tunnels.

wsManagedAPDistTunnelsMaxMcastRepl

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.32

Maximum number of tunnels on the home AP that are members of the
same VLAN.

wsManagedAPDistTunnelsMaxVlanMcastRepl

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.33

The VLAN ID over which the max number of multicast
replications are sent into the distributed tunnels.

wsManagedAPMacAddress wsManagedAPRadioInterface

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.6.1.1.34

wsManagedAPStatisticsTable

table

.1.3.6.1.4.1.207.8.42.8.34.6.3 · 1 row entry · 35 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsManagedAPStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsManagedAPStatisticsTable'

This table contains statistics available for each AP
managed by the controller.

wsManagedAPStatisticsEntry row .1.3.6.1.4.1.207.8.42.8.34.6.3.1

Each entry in this table contain statistics available for each AP
managed by the controller.

Indexes

No indexes recorded

Column	Syntax	OID
wsManagedAPWLANPktsRecvd Total packets received by an AP on the wireless network.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.1`
wsManagedAPWLANBytesRecvd Total bytes received by an AP on the wireless network.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.2`
wsManagedAPWLANPktsTransmitted Total packets transmitted by an AP on the wireless network.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.3`
wsManagedAPWLANBytesTransmitted Total bytes transmitted by an AP on the wireless network.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.4`
wsManagedAPEthernetPktsRecvd Total packets received by an AP on the wired network.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.5`
wsManagedAPEthernetBytesRecvd Total bytes received by an AP on the wired network.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.6`
wsManagedAPEthernetMcastPktsRecvd Total multicast packets received by an AP on the wired network.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.7`
wsManagedAPEthernetPktsTransmitted Total packets transmitted by an AP on the wired network.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.8`
wsManagedAPEthernetBytesTransmitted Total bytes transmitted by an AP on the wired network.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.9`
wsManagedAPEthernetTransmitErrorCount Total transmit errors detected by an AP on the wired network.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.10`
wsManagedAPEthernetRecvdErrorCount Total receive errors detected by an AP on the wired network.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.11`
wsManagedAPCL2TunnelBytesRecvd Total bytes received via central L2 tunnel by the AP.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.12`
wsManagedAPCL2TunnelPktsRecvd Total packets received via central L2 tunnel by the AP.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.13`
wsManagedAPCL2TunnelMcastRecvd Total multicast packets received via central L2 tunnel by the AP.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.14`
wsManagedAPCL2TunnelBytesTransmitted Total bytes transmitted via central L2 tunnel by the AP.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.15`
wsManagedAPCL2TunnelPktsTransmitted Total packets transmitted via central L2 tunnel by the AP.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.16`
wsManagedAPCL2TunnelMcastTransmitted Total multicast packets transmitted via central L2 tunnel by the AP.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.17`
wsManagedAPWLANPktsRecvDropped Total packets dropped in the receive direction by an AP on the wireless network. This is due to client QoS actions affecting the wireless up (inbound) direction from AP to client.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.18`
wsManagedAPWLANBytesRecvDropped Total bytes dropped in the receive direction by an AP on the wireless network. This is due to client QoS actions affecting the wireless up (inbound) direction from AP to client.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.19`
wsManagedAPWLANPktsTransmitDropped Total packets dropped in the transmit direction by an AP on the wireless network. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.20`
wsManagedAPWLANBytesTransmitDropped Total bytes dropped in the transmit direction by an AP on the wireless network. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.21`
wsManagedAPDistTunnelBytesTransmitted Total Bytes transmitted by the AP through all the established Distributed Tunnels.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.22`
wsManagedAPDistTunnelBytesReceived Total Bytes received by the AP through all the established Distributed Tunnels.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.23`
wsManagedAPDistTunnelPacketsTransmitted Total packets transmitted by the AP through all the established Distributed Tunnels.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.24`
wsManagedAPDistTunnelPacketsReceived Total packets received by the AP through all the established Distributed Tunnels.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.25`
wsManagedAPDistTunnelMcastPacketsTransmitted Total multicast packets transmitted by the AP through all the established Distributed Tunnels.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.26`
wsManagedAPDistTunnelMcastPacketsReceived Total multicast packets received by the AP through all the established Distributed Tunnels.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.27`
wsManagedAPDistTunnelRoamedClients Total number of clients that used this AP for Distributed Tunneling. This inclides clients that roamed away from and to this AP.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.28`
wsManagedAPDistTunnelRoamedClientsIdleTimedOut Number of client tunnel sessions that were terminated because of not sending the traffic through the tunnel after roaming.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.29`
wsManagedAPDistTunnelRoamedClientsAgeTimedOut Number of client tunnel sessions that were terminated because of expiry of the tunnel session.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.30`
wsManagedAPDistTunnelMaxClientLimitSetupDenials Number of client tunnel session setup denials by the AP because of reaching the maximum configured client limit.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.31`
wsManagedAPDistTunnelMaxReplSetupDenials Number of client tunnel setup denials by the AP because of reaching the maximum configured VLAN replications limit.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.32`
wsManagedAPARPReqsFromBcastToUcast Total number of ARP requests converted from broadcast to unicast packet before transmitting on wireless network.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.33`
wsManagedAPFilteredARPRequest Total number of ARP requests filtered by the wireless ARP suppression logic.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.34`
wsManagedAPBroadcastedARPRequests Total number of ARP requests broadcasted on to the wireless network after being processed by wireless ARP suppression logic.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.3.1.35`

wsManagedAPRadioStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.6.4 · 1 row entry · 17 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsManagedAPRadioStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsManagedAPRadioStatusTable'

This table contains status parameters per radio interface for
all the APs managed by controller.

wsManagedAPRadioStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.6.4.1

Each entry in this table contains status parameters per radio
interface for an AP managed by the controller.

Indexes

Column Syntax OID

wsManagedAPRadioInterface

The physical radio interface on the AP.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.6.4.1.1

wsManagedAPRadioMacAddress

The MAC address of the physical radio.

wsManagedAPRadioAuthenticatedClients

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.6.4.1.2

wsManagedAPRadioChannel

If the radio is operational, the current transmit channel
for this radio interface.

Integer32

Constraints:
range: 0-13
range: 36-36
range: 40-40
range: 44-44
range: 48-48
range: 52-52
range: 56-56
range: 60-60
range: 64-64

.1.3.6.1.4.1.207.8.42.8.34.6.4.1.3

wsManagedAPRadioTxPower

If the radio is operational, the current transmit power
of the radio.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.207.8.42.8.34.6.4.1.4

Total count of clients authenticated on the physical radio.

wsManagedAPRadioWLANUtilization

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.6.4.1.5

Total network utilization for the physical radio. This
value is based on radio statistics.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.207.8.42.8.34.6.4.1.6

wsManagedAPRadioFixedChannelIndicator

This flag indicates if a fixed channel is configured
and assigned to the radio.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.207.8.42.8.34.6.4.1.7

wsManagedAPRadioMCAStatus

Indicates the current state of a manual request
to change the channel on this radio.

Enumeration

Enumerated Values:

1	none
2	in-progress
3	complete
4	failure

.1.3.6.1.4.1.207.8.42.8.34.6.4.1.8

wsManagedAPRadioFixedPowerIndicator

This flag indicates if a fixed power setting is configured
and assigned to the radio.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.207.8.42.8.34.6.4.1.9

wsManagedAPRadioMPAStatus

Indicates the current state of a manual request
to change the power setting on this radio.

Enumeration

Enumerated Values:

1	none
2	in-progress
3	complete
4	failure

.1.3.6.1.4.1.207.8.42.8.34.6.4.1.10

wsManagedAPRadioNeighborCount

Total number of neighbors that can be seen
by this radio in its RF area.

wsManagedAPRadioFixedChannelAction

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.6.4.1.11

This is an action object. When we set this object to apply,
along with wsManagedAPRadioFixedChannel, controller starts
applying fixed channel assignment for this radio. Read
on this object will always return none.

Enumeration

Enumerated Values:

1	none
2	apply

.1.3.6.1.4.1.207.8.42.8.34.6.4.1.12

wsManagedAPRadioFixedChannel

This object is used to assign the fixed channel for this radio on this
Managed AP.
The following MIB objects get changed on successful setting of this
MIB object -
1. wsManagedAPRadioChannel --> changes to the channel s…

Integer32

Constraints:
range: 0-13
range: 36-36
range: 40-40
range: 44-44
range: 48-48
range: 52-52
range: 56-56
range: 60-60
range: 64-64

.1.3.6.1.4.1.207.8.42.8.34.6.4.1.13

wsManagedAPRadioFixedPowerAction

This is an action object. When we set this object to apply,
controller starts applying fixed power adjustment for this radio.
Read on this object will always return none.

Enumeration

Enumerated Values:

1	none
2	apply

.1.3.6.1.4.1.207.8.42.8.34.6.4.1.14

wsManagedAPRadioFixedPower

This object is used to assign the fixed power for this radio on this
Managed AP.
The following MIB objects get changed on successful setting of this
MIB object -
1. wsManagedAPRadioTxPower --> changes to the power set h…

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.207.8.42.8.34.6.4.1.15

wsManagedAPRadioBandwidth

Current Channel Bandwidth In Use.

Enumeration

Enumerated Values:

0	none
1	twentyMHz
2	fortyMHz
3	eightyMHz

.1.3.6.1.4.1.207.8.42.8.34.6.4.1.16

wsManagedAPRadioResourceMeasEnabled

Current state of enablement for Radio Resource Management (RRM).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.207.8.42.8.34.6.4.1.17

wsManagedAPRadioStatisticsTable

table

.1.3.6.1.4.1.207.8.42.8.34.6.5 · 1 row entry · 22 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsManagedAPRadioStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsManagedAPRadioStatisticsTable'

This table contains statistics available for each physical
radio on an AP managed by the controller.

wsManagedAPRadioStatisticsEntry row .1.3.6.1.4.1.207.8.42.8.34.6.5.1

Each entry in this table contain statistics available for each
physical radio on an AP managed by controller.

Indexes

No indexes recorded

Column	Syntax	OID
wsManagedAPRadioWLANPktsRecvd Total packets received by an AP on this radio interface.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.1`
wsManagedAPRadioWLANBytesRecvd Total bytes received by an AP on this radio interface.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.2`
wsManagedAPRadioWLANPktsTransmitted Total packets transmitted by an AP on this radio interface.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.3`
wsManagedAPRadioWLANBytesTransmitted Total bytes transmitted by an AP on this radio interface.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.4`
wsManagedAPRadioTxFragmentCount Count of acknowledged MPDU with an individual address or an MPDU with a multicast address of type data or management.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.5`
wsManagedAPRadioMcastTxFrameCount Count of successfully transmitted MSDU frames where the multicast bit is set in the destination MAC address.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.6`
wsManagedAPRadioFailedCount Number of times a MSDU is not transmitted successfully due to transmit attempts exceeding either the short retry limit or the long retry limit.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.7`
wsManagedAPRadioRetryCount Number of times a MSDU is successfully transmitted after one or more retries.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.8`
wsManagedAPRadioMultipleRetryCount Number of times a MSDU is successfully transmitted after more than one retry.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.9`
wsManagedAPRadioFrameDuplicateCount Number of times a frame is received and sequence control field indicates is a duplicate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.10`
wsManagedAPRadioRTSSuccessCount Count of CTS frames received in response to the RTS frames.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.11`
wsManagedAPRadioRTSFailureCount Count of CTS frames not received in response to the RTS frames.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.12`
wsManagedAPRadioACKFailureCount Count of ACK frames not received when expected.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.13`
wsManagedAPRadioRecvdFragmentCount Count of successfully received MPDU frames of type data or management.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.14`
wsManagedAPRadioMcastRecvdFrameCount Count of MSDU frames received with the multicast bit set in the destination MAC address.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.15`
wsManagedAPRadioFCSErrorCount Count of FCS errors detected in a received MPDU frame.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.16`
wsManagedAPRadioTxFrameCount Count of each successfully transmitted MSDU.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.17`
wsManagedAPRadioWEPUndecryptableCount Count of encrypted frames received and the key configuration of the transmitter indicates that the frame should not have been encrypted or that frame was discarded due to the receiving station not implementing the priva…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.18`
wsManagedAPRadioWLANPktsRecvDropped Total packets dropped in the receive direction on this radio interface. This is due to client QoS actions affecting the wireless up (inbound) direction from AP to client.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.19`
wsManagedAPRadioWLANBytesRecvDropped Total bytes dropped in the receive direction on this radio interface. This is due to client QoS actions affecting the wireless up (inbound) direction from AP to client.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.20`
wsManagedAPRadioWLANPktsTransmitDropped Total packets dropped in the transmit direction by this radio interface. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.21`
wsManagedAPRadioWLANBytesTransmitDropped Total bytes dropped in the transmit direction by this radio interface. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.5.1.22`

wsManagedAPNeighborAPListTable

table

.1.3.6.1.4.1.207.8.42.8.34.6.6 · 1 row entry · 5 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsManagedAPNeighborAPListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsManagedAPNeighborAPListTable'

This table contains neighbor AP list.

wsManagedAPNeighborAPListEntry row .1.3.6.1.4.1.207.8.42.8.34.6.6.1

Each entry in this table contains neighbor AP information.

Indexes

wsManagedAPMacAddress wsManagedAPRadioInterface wsNeighborMacAddress

Column Syntax OID

wsNeighborMacAddress

The MAC address of neighbor AP network. This could be a physical radio MAC or
VAP MAC address.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.6.6.1.1

wsNeighborSSID

Service Set ID of neighbor AP network.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.207.8.42.8.34.6.6.1.2

wsNeighborRSSI

This object indicates Received Signal Strength(RSSI)
from the neighbor radios in a given channel.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.207.8.42.8.34.6.6.1.3

wsNeighborStatus

Indicates managed status of the AP.

Enumeration

Enumerated Values:

1	managed
2	unknown
3	standalone
4	rogue

.1.3.6.1.4.1.207.8.42.8.34.6.6.1.4

wsNeighborAge

Indicates time since this AP was last detected.

wsManagedAPMacAddress wsManagedAPRadioInterface wsNeighborClientMacAddress

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.6.6.1.5

wsManagedAPNeighborClientListTable

table

.1.3.6.1.4.1.207.8.42.8.34.6.8 · 1 row entry · 5 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsManagedAPNeighborClientListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsManagedAPNeighborClientListTable'

This table contains neighbor client list currently
detected by an RF scan on the radio.

wsManagedAPNeighborClientListEntry row .1.3.6.1.4.1.207.8.42.8.34.6.8.1

Each entry in this table contain neighbor client information.

Indexes

Column Syntax OID

wsNeighborClientMacAddress

The MAC address of neighbor client station.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.6.8.1.1

wsNeighborClientRSSI

Indicates RSSI from neighbor clients on the radio.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.207.8.42.8.34.6.8.1.2

wsNeighborClientChannel

Indicates AP channel, on which the client frame was received.

Integer32

Constraints:
range: 1-13
range: 36-36
range: 40-40
range: 44-44
range: 48-48
range: 52-52
range: 56-56
range: 60-60
range: 64-64

.1.3.6.1.4.1.207.8.42.8.34.6.8.1.3

wsNeighborClientAge

Indicates time since a client was last detected.

wsNeighborClientDiscoveryReason

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.6.8.1.4

Indicates discovery methods for the neighbor client.

Bits

Enumerated Values:

0	none
1	rfscan-discovered
2	neighbor-ap-associated
3	current-ap-associated
4	probe-request-discovered
5	peer-ap-associated
6	ad-hoc-rogue

.1.3.6.1.4.1.207.8.42.8.34.6.8.1.5

wsManagedAPVAPStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.6.9 · 1 row entry · 4 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsManagedAPVAPStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsManagedAPVAPStatusTable'

This table contains status parameters for each VAP
configured on a radio interface for a WS managed AP.

wsManagedAPVAPStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.6.9.1

Each entry in this table contains status parameters of each
VAP configured on radio.

Indexes

wsManagedAPMacAddress wsManagedAPRadioInterface wsManagedVAPId

Column	Syntax	OID
wsManagedVAPId Indicates VAP Id.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.207.8.42.8.34.6.9.1.1`
wsManagedVAPMacAddress Indicates the ethernet address of the VAP MAC address.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.6.9.1.2`
wsManagedVAPSSID Network assigned to a VAP MAC Address.	OctetString Constraints: `range: 1-32`	`.1.3.6.1.4.1.207.8.42.8.34.6.9.1.3`
wsManagedVAPAuthenticatedClients Number of clients currently authenticated to VAP.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.9.1.4`

wsManagedAPVAPStatisticsTable

table

.1.3.6.1.4.1.207.8.42.8.34.6.10 · 1 row entry · 10 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsManagedAPVAPStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsManagedAPVAPStatisticsTable'

This table contains statistics available for each VAP
on the WS managed AP.

wsManagedAPVAPStatisticsEntry row .1.3.6.1.4.1.207.8.42.8.34.6.10.1

Each entry in this table contain statistics available for each
VAP on the WS managed AP.

Indexes

No indexes recorded

Column	Syntax	OID
wsManagedVAPAssociationFailures Number of clients that have been denied association to the VAP.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.10.1.1`
wsManagedVAPAuthenticationFailures Number of clients that have failed authentication to the VAP.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.6.10.1.2`
wsManagedVAPWLANPktsRecvd Total packets received by an AP on this VAP.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.10.1.3`
wsManagedVAPWLANBytesRecvd Total bytes received by an AP on this VAP.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.10.1.4`
wsManagedVAPWLANPktsTransmitted Total packets transmitted by an AP on this VAP.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.10.1.5`
wsManagedVAPWLANBytesTransmitted Total bytes transmitted by an AP on this VAP.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.10.1.6`
wsManagedVAPWLANPktsRecvDropped Total packets dropped in the receive direction by an AP on this VAP. This is due to client QoS actions affecting the wireless up (inbound) direction from AP to client.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.10.1.7`
wsManagedVAPWLANBytesRecvDropped Total bytes dropped in the receive direction by an AP on this VAP. This is due to client QoS actions affecting the wireless up (inbound) direction from AP to client.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.10.1.8`
wsManagedVAPWLANPktsTransmitDropped Total packets dropped in the transmit direction by an AP on this VAP. This is due to client QoS actions affecting the wireless down (outbound) direction from client to AP.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.10.1.9`
wsManagedVAPWLANBytesTransmitDropped Total bytes dropped in the transmit direction by an AP on this VAP. This is due to client QoS actions affecting the wireless down (outbound) direction from client to AP.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.6.10.1.10`

wsManagedAPRadioEligibleChannelListTable

table

.1.3.6.1.4.1.207.8.42.8.34.6.12 · 1 row entry · 4 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsManagedAPRadioEligibleChannelListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsManagedAPRadioEligibleChannelListTable'

This table represents eligible channel entries for an AP radio
to consider for channel algorithm. It is based on country code,
hardware capabilities and any configured channel limitations.

wsManagedAPRadioEligibleChannelListEntry row .1.3.6.1.4.1.207.8.42.8.34.6.12.1

Each entry in this table represents eligible channel for an
AP radio.

Indexes

wsManagedAPMacAddress wsManagedAPRadioInterface wsManagedAPRadioEligibleChannel

Column Syntax OID

wsManagedAPRadioEligibleChannel

Indicates list of supported channel by
the managed ap. List contains one or
more entries from 1-255, actual range
is determined by physical mode and country code.

Integer32

Constraints:
range: 1-64

.1.3.6.1.4.1.207.8.42.8.34.6.12.1.1

wsManagedAPRadioEligibleChannelRdrDetRequired

This flag indicates if radar detection is enabled or not
on this channel.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.207.8.42.8.34.6.12.1.2

wsManagedAPRadioEligibleChannelRdrDetected

This flag indicates if radar is detected or not
on this channel.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.207.8.42.8.34.6.12.1.3

wsManagedAPRadioEligibleChannelLastRdrDetTime

Indicates the time in seconds since last radar was detected.

wsAssociatedClientMacAddress

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.42.8.34.6.12.1.4

wsAssociatedClientStatusTable

table obsolete

.1.3.6.1.4.1.207.8.42.8.34.7.1 · 1 row entry · 32 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAssociatedClientStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAssociatedClientStatusTable'

This table contains status parameters of clients that are
currently associated with managed APs.

wsAssociatedClientStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.7.1.1

Each entry in this table contain client status parameters
assocaited with the WS managed AP.

Indexes

Column Syntax OID

wsAssociatedClientMacAddressobsolete

Associated client MAC address.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.1

wsAssociatedClientTunnelIpAddressobsolete

Indicates network IP address of the client station, 0.0.0.0 indicates unknown.
Tunnel IP subnet is present only for clients authenticated with tunneled VAPs.

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.2

wsAssociatedClientUserNameobsolete

Indicates user name of the client that have authenticated via
802.1x, clients on networks with other security modes will
not have a user name.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.3

wsAssociatedClientSSIDobsolete

Indicates the network on which the client is connected.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.4

wsAssociatedClientVLANobsolete

If client is on VAP using VLAN data forwarding mode,
indicates obsolete assigned VLAN.

Integer32

Constraints:
range: 0-4094

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.5

wsAssociatedClientStatusobsolete

This object indicates client's status.

Enumeration

Enumerated Values:

1	authenticated
2	associated
3	disassociated

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.6

wsAssociatedClientTxDataRateobsolete

Indicates the data rate, AP will actually support
in setting up communications with client stations
represented by a count from 2 - 1200, corresponding
to data rates in multiples of 500 kbit/s from 1 Mbit/s
to 600 Mbit/…

Integer32

Constraints:
range: 2-1200

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.7

wsAssociatedClientInactivePeriodobsolete

For a current association, period of time that
the AP has not seen any traffic for the client.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.8

wsAssociatedClientDisassociateActionobsolete

This is an action object. Setting this object to start
will initiate the disassociation of associated client.
Read on this object will always return none.

Enumeration

Enumerated Values:

1	none
2	start

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.9

wsAssociatedClientAgeobsolete

Indicates time since the controller has received new data for
this client.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.10

wsAssociatedClientAssociatingSwitchobsolete

This object indicates whether the client is associated
to an AP managed by this controller or peer-controller.

Enumeration

Enumerated Values:

1	local-switch
2	peer-switch

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.11

wsAssociatedClientSwitchMacAddressobsolete

MAC address of the WS associating the client.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.12

wsAssociatedClientSwitchIpAddressobsolete

IP address of the WS associating the client.

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.13

wsAssociatedClientDot11nCapableobsolete

Flag indicating whether this client is capable of 802.11n operation.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.14

wsAssociatedClientStbcCapableobsolete

Flag indicating whether this client is capable of Space Time Block Code (STBC) operation.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.15

wsAssociatedClientDistTunnelStatusobsolete

Indicates whether L2 Distributed Tunneling is Enabled or Disabled

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.16

wsAssociatedClientDistTunnelRoamStatusobsolete

Indicates whether the client is using the distrubuted tunnel or not.
Also indicates if it is a roamed client or not.

Enumeration

Enumerated Values:

0	associated
1	home

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.17

wsAssociatedClientDistTunnelHomeAPMacobsolete

Indicates MAC Address of the client's Home AP. Here the client should be
associated with the network on which the L2 Distributed Tunneling is enabled.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.18

wsAssociatedClientDistTunnelAssocAPMacobsolete

MAC Address of the client's Association AP to which the client has roamed to.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.19

wsAssociatedClientAPMacAddressobsolete

MAC Address of the AP to which client is Associated.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.20

wsAssociatedClientBSSIDobsolete

BSSID of the VAP to which client is associated.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.21

wsAssociatedClientRadioInterfaceobsolete

Indicates the radio interface on which client is associated.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.22

wsAssociatedClientChannelobsolete

Indicates channel for associated client entry.

Integer32

Constraints:
range: 1-165

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.23

wsAssociatedClientNwTimeobsolete

Indicates time since this client first authenticated with
the network.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.24

wsAssociatedClientIpAddressobsolete

Indicates network IPv4 address of the client station detetecd through ARP snooping, 0.0.0.0 indicates unknown.

wsClientStationMacAddress wsClientNeighborWSManagedAPMacAddress wsClientNeighborWSManagedAPRadioInterface

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.25

wsAssociatedClientNetBiosNameobsolete

NetBios Name of the client.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.26

wsAssociatedClientRRMSupportedobsolete

Indicates if the Radio Resource Management (RRM) portion of the
IEEE 802.11k standard is supported by client and RRM is enabled is on
the AP Profile.
Value 2 indicates the client supports RRM portion and
RRM Mode is not…

Enumeration

Enumerated Values:

1	enabled
2	supported
3	unsupported

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.27

wsAssociatedClientRRMLocationReportSupportedobsolete

Indicates if the client can support RRM location report requests.

Enumeration

Enumerated Values:

1	supported
2	unsupported

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.28

wsAssociatedClientRRMBeaconTableMeasurementSupportedobsolete

Indicates if the client can detect APs via RRM beacon table reports.

Enumeration

Enumerated Values:

1	supported
2	unsupported

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.29

wsAssociatedClientRRMBeaconActiveMeasurementSupportedobsolete

Indicates if the client supports active scan capability.

Enumeration

Enumerated Values:

1	supported
2	unsupported

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.30

wsAssociatedClientRRMBeaconPassiveMeasurementSupportedobsolete

Indicates if the client supports passive scan capability.

Enumeration

Enumerated Values:

1	supported
2	unsupported

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.31

wsAssociatedClientRRMChannelLoadMeasurementSupportedobsolete

Indicates if the client supports RRM channel load measurement.

Enumeration

Enumerated Values:

1	supported
2	unsupported

.1.3.6.1.4.1.207.8.42.8.34.7.1.1.32

wsAssociatedClientStatisticsTable

table obsolete

.1.3.6.1.4.1.207.8.42.8.34.7.2 · 1 row entry · 15 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAssociatedClientStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAssociatedClientStatisticsTable'

This table contains statistics available for each client
associated to a WS managed AP.

wsAssociatedClientStatisticsEntry row .1.3.6.1.4.1.207.8.42.8.34.7.2.1

Each entry in this table contain statistics available for each
client associated a WS managed AP.

Indexes

No indexes recorded

Column	Syntax	OID
wsAssociatedClientPktsRecvdobsolete Total packets received by a managed AP from the client station.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.7.2.1.1`
wsAssociatedClientBytesRecvdobsolete Total bytes received by a managed AP from the client station.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.7.2.1.2`
wsAssociatedClientPktsTransmittedobsolete Total packets transmitted by a managed AP to the client station.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.7.2.1.3`
wsAssociatedClientBytesTransmittedobsolete Total bytes transmitted by a managed AP to the client station.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.7.2.1.4`
wsAssociatedClientDuplicatePktsRecvdobsolete Total duplicate packets received from the client station.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.7.2.1.5`
wsAssociatedClientFragmentedPktsRecvdobsolete Total fragmented packets received from the client station.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.7.2.1.6`
wsAssociatedClientFragmentedPktsTransmittedobsolete Total fragmented packets transmitted to the client station.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.7.2.1.7`
wsAssociatedClientTransmitRetryCountobsolete Indicates number of times transmits to client station succeeded after one or more retries.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.7.2.1.8`
wsAssociatedClientTransmitRetryFailedCountobsolete Number of times transmits to client station failed after one or more retries.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.7.2.1.9`
wsAssociatedClientPktsRecvDroppedobsolete Total packets dropped in the receive direction by a managed AP from the client station. This is due to client QoS actions affecting the wireless up (inbound) direction from client to AP.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.7.2.1.10`
wsAssociatedClientBytesRecvDroppedobsolete Total bytes dropped in the receive direction by a managed AP from the client station. This is due to client QoS actions affecting the wireless up (inbound) direction from client to AP.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.7.2.1.11`
wsAssociatedClientPktsTransmitDroppedobsolete Total packets dropped in the transmit direction by a managed AP to the client station. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.7.2.1.12`
wsAssociatedClientBytesTransmitDroppedobsolete Total bytes dropped in the transmit direction by a managed AP to the client station. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.7.2.1.13`
wsAssociatedClientTsViolatePktsRecvdobsolete Number of packets received by the AP from a client station that are in excess of the client's alotted traffic stream (TS) uplink bandwidth, or are for an access category requiring admission control to which the client s…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.7.2.1.14`
wsAssociatedClientTsViolatePktsTransmittedobsolete Number of packets transmitted by the AP to a client station that are in excess of the client's alotted traffic stream (TS) downlink bandwidth, or are for an access category requiring admission control to which the clien…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.7.2.1.15`

wsAssociatedClientNeighborManagedAPStatusTable

table obsolete

.1.3.6.1.4.1.207.8.42.8.34.7.3 · 1 row entry · 4 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAssociatedClientNeighborManagedAPStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAssociatedClientNeighborManagedAPStatusTable'

This table is maintained to lookup all WS managed APs
detected, client can see in its RF area.

wsAssociatedClientNeighborManagedAPStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.7.3.1

Each entry in this table contain WS managed APs that can
be seen by client in its RF area.

Indexes

Column Syntax OID

wsClientStationMacAddressobsolete

The Ethernet address of a client station.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.7.3.1.1

wsClientNeighborWSManagedAPMacAddressobsolete

The Ethernet address of a WS managed AP.

wsVAPMacAddress wsVAPAssociatedClientMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.7.3.1.2

wsClientNeighborWSManagedAPRadioInterfaceobsolete

The radio interface of Managed AP.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.7.3.1.3

wsClientStationDiscoveryReasonobsolete

Indicates the client status with respect to the
Managed AP it is refering. One or more flags can
be enabled at the same time.

Bits

Enumerated Values:

0	none
1	rfscan-discovered
2	neighbor-ap-associated
3	current-ap-associated
4	probe-request-discovered
5	ad-hoc-rogue
6	associated-to-peer-ap

.1.3.6.1.4.1.207.8.42.8.34.7.3.1.4

wsVAPAssociatedClientStatusTable

table obsolete

.1.3.6.1.4.1.207.8.42.8.34.7.4 · 1 row entry · 2 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsVAPAssociatedClientStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsVAPAssociatedClientStatusTable'

This table is maintained to lookup clients associated
to a specific VAP on a WS managed AP.

wsVAPAssociatedClientStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.7.4.1

Each entry in this table contain clients associated
to each VAP.

Indexes

Column	Syntax	OID
wsVAPMacAddressobsolete The Ethernet address assigned to a VAP.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.7.4.1.1`
wsVAPAssociatedClientMacAddressobsolete The Ethernet address of associated client station.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.7.4.1.2`

wsSSIDAssociatedClientStatusTable

table obsolete

.1.3.6.1.4.1.207.8.42.8.34.7.5 · 1 row entry · 2 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsSSIDAssociatedClientStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsSSIDAssociatedClientStatusTable'

This table is maintained to lookup all clients
associated to a particular network.

wsSSIDAssociatedClientStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.7.5.1

Each entry in this table contain clients
associated to a particular network.

Indexes

wsSSIDAssociatedClientMacAddress

Column	Syntax	OID
wsSSIDobsolete Indicates the network on which the client is connected.	OctetString Constraints: `range: 1-32`	`.1.3.6.1.4.1.207.8.42.8.34.7.5.1.1`
wsSSIDAssociatedClientMacAddressobsolete The Ethernet address of the client station.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.7.5.1.2`

wsSwitchAssociatedClientStatusTable

table obsolete

.1.3.6.1.4.1.207.8.42.8.34.7.6 · 1 row entry · 2 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsSwitchAssociatedClientStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsSwitchAssociatedClientStatusTable'

This table is maintained to lookup clients associated
to the APs managed by the specific controller.

wsSwitchAssociatedClientStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.7.6.1

Each entry in this table contain client associated
to each controller.

Indexes

wsSwitchIPAddress wsSwitchAssociatedClientMacAddress

Column	Syntax	OID
wsAssociatedClientSwitchIPAddressobsolete IP address of the WS associating the client.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.207.8.42.8.34.7.6.1.1`
wsSwitchAssociatedClientMacAddressobsolete Ethernet address of the associated client station.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.7.6.1.2`

wsAssociatedClientQosStatusTable

table obsolete

.1.3.6.1.4.1.207.8.42.8.34.7.7 · 1 row entry · 11 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAssociatedClientQosStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAssociatedClientQosStatusTable'

This table contains client QoS status parameters of clients that are
currently associated with managed APs. These objects represent the
actual operational status values in effect for the clients.

wsAssociatedClientQosStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.7.7.1

Each entry in this table contains client QoS status parameters
for a client associated with the WS managed AP.

Indexes

No indexes recorded

Column Syntax OID

wsAssociatedClientQosBandwidthLimitDownobsolete

Maximum bandwidth rate allowed for the wireless down (outbound)
direction from AP to client, thus controlling the maximum
receive rate from the AP for this wireless client. This
parameter is specified in bits-per-secon…

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.7.7.1.1

wsAssociatedClientQosBandwidthLimitUpobsolete

Maximum bandwidth rate allowed for the wireless up (inbound)
direction from client to AP, thus controlling the maximum
send rate from this wireless client to the AP. This
parameter is specified in bits-per-second (bps)…

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.7.7.1.2

wsAssociatedClientQosAccessControlDownTypeobsolete

Access list type used for the wireless down (outbound) direction from
the AP to this client. The wsAssociatedClientQosAccessControlDownName
object identifies the access list.

Enumeration

Enumerated Values:

1	none
2	ip
3	mac
4	ipv6

.1.3.6.1.4.1.207.8.42.8.34.7.7.1.3

wsAssociatedClientQosAccessControlDownNameobsolete

Name of the access list in use in accordance with the
wsAssociatedClientQosAccessControlDownType as follows:

none(1) - This object is not displayed.

ip(2) - This specifies an IP access li…

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.207.8.42.8.34.7.7.1.4

wsAssociatedClientQosAccessControlUpTypeobsolete

Access list type used for the wireless up (inbound) direction from
this client to the AP. The wsAssociatedClientQosAccessControlUpName
object identifies the access list.

Enumeration

Enumerated Values:

1	none
2	ip
3	mac
4	ipv6

.1.3.6.1.4.1.207.8.42.8.34.7.7.1.5

wsAssociatedClientQosAccessControlUpNameobsolete

Name of the access list in use in accordance with the
wsAssociatedClientQosAccessControlUpType as follows:

none(1) - This object is not displayed.

ip(2) - This specifies an IP access list…

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.207.8.42.8.34.7.7.1.6

wsAssociatedClientQosDiffservPolicyDownTypeobsolete

DiffServ policy type used for the wireless down (outbound) direction from
the AP to this client. The wsAssociatedClientQosDiffservPolicyDownName
object identifies the DiffServ policy.

Enumeration

Enumerated Values:

1	none
2	in

.1.3.6.1.4.1.207.8.42.8.34.7.7.1.7

wsAssociatedClientQosDiffservPolicyDownNameobsolete

Name of the DiffServ policy in use in accordance with the
wsAssociatedClientQosDiffservPolicyDownType as follows:

none(1) - This object is not displayed.

in(2) - This specifies a DiffServ…

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.207.8.42.8.34.7.7.1.8

wsAssociatedClientQosDiffservPolicyUpTypeobsolete

DiffServ policy type used for the wireless up (inbound) direction from
this client to the AP. The wsAssociatedClientQosDiffservPolicyUpName
object identifies the DiffServ policy.

Enumeration

Enumerated Values:

1	none
2	in

.1.3.6.1.4.1.207.8.42.8.34.7.7.1.9

wsAssociatedClientQosDiffservPolicyUpNameobsolete

Name of the DiffServ policy in use in accordance with the
wsAssociatedClientQosDiffservPolicyUpType as follows:

none(1) - This object is not displayed.

in(2) - This specifies a DiffServ p…

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.207.8.42.8.34.7.7.1.10

wsAssociatedClientQosOperStatusobsolete

Designates the AP quality-of-service operational status for
this wireless client. This represents the combined states of
the wsApClientQosMode object and the wsNetworkClientQosMode
object for the wireless network to wh…

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.7.7.1.11

wsAssociatedClientSessionStatisticsTable

table obsolete

.1.3.6.1.4.1.207.8.42.8.34.7.8 · 1 row entry · 15 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAssociatedClientSessionStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAssociatedClientSessionStatisticsTable'

This table contains statistics available for each client
associated to a WS managed AP, but accumulated for the duration
of the entire WLAN session, inclusive of client roaming.

wsAssociatedClientSessionStatisticsEntry row .1.3.6.1.4.1.207.8.42.8.34.7.8.1

Each entry in this table contain statistics available for each
client associated a WS managed AP, but accumulated for the duration
of the entire WLAN session, inclusive of client roaming.

Indexes

No indexes recorded

Column	Syntax	OID
wsAssociatedClientSessionPktsRecvdobsolete Total packets received by managed APs from the client station throughout the duration of the current WLAN session.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.7.8.1.1`
wsAssociatedClientSessionBytesRecvdobsolete Total bytes received by managed APs from the client station throughout the duration of the current WLAN session.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.7.8.1.2`
wsAssociatedClientSessionPktsTransmittedobsolete Total packets transmitted by managed APs to the client station throughout the duration of the current WLAN session.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.7.8.1.3`
wsAssociatedClientSessionBytesTransmittedobsolete Total bytes transmitted by managed APs to the client station throughout the duration of the current WLAN session.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.7.8.1.4`
wsAssociatedClientSessionDuplicatePktsRecvdobsolete Total duplicate packets received from the client station throughout the duration of the current WLAN session.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.7.8.1.5`
wsAssociatedClientSessionFragmentedPktsRecvdobsolete Total fragmented packets received from the client station. throughout the duration of the current WLAN session.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.7.8.1.6`
wsAssociatedClientSessionFragmentedPktsTransmittedobsolete Total fragmented packets transmitted to the client station throughout the duration of the current WLAN session.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.7.8.1.7`
wsAssociatedClientSessionTransmitRetryCountobsolete Indicates number of times transmits to client station succeeded after one or more retries throughout the duration of the current WLAN session.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.7.8.1.8`
wsAssociatedClientSessionTransmitRetryFailedCountobsolete Number of times transmits to client station failed after one or more retries throughout the duration of the current WLAN session.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.7.8.1.9`
wsAssociatedClientSessionPktsRecvDroppedobsolete Total packets dropped in the receive direction by managed APs from the client station throughout the duration of the current WLAN session. This is due to client QoS actions affecting the wireless up (inbound) direction…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.7.8.1.10`
wsAssociatedClientSessionBytesRecvDroppedobsolete Total bytes dropped in the receive direction by managed APs from the client station throughout the duration of the current WLAN session. This is due to client QoS actions affecting the wireless up (inbound) direction f…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.7.8.1.11`
wsAssociatedClientSessionPktsTransmitDroppedobsolete Total packets dropped in the transmit direction by managed APs to the client station throughout the duration of the current WLAN session. This is due to client QoS actions affecting the wireless down (outbound) directi…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.7.8.1.12`
wsAssociatedClientSessionBytesTransmitDroppedobsolete Total bytes dropped in the transmit direction by managed APs to the client station throughout the duration of the current WLAN session. This is due to client QoS actions affecting the wireless down (outbound) direction…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.7.8.1.13`
wsAssociatedClientSessionTSViolatePktsRecvdobsolete Number of packets received by managed APs from a client station throughout the duration of the current WLAN session that are in excess of the client's alotted traffic stream (TS) uplink bandwidth, or are for an access c…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.7.8.1.14`
wsAssociatedClientSessionTSViolatePktsTransmittedobsolete Number of packets transmitted by managed APs to a client station throughout the duration of the current WLAN session that are in excess of the client's alotted traffic stream (TS) downlink bandwidth, or are for an acces…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.7.8.1.15`

wsAssociatedClientQosCachedStatusTable

table obsolete

.1.3.6.1.4.1.207.8.42.8.34.7.9 · 1 row entry · 10 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAssociatedClientQosCachedStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAssociatedClientQosCachedStatusTable'

This table contains cached client QoS status parameters of clients that are
currently associated with managed APs. These objects represent values
that were retrieved from a RADIUS server for this client. See the
wsAssociatedClientQosStatusTable for the current set of operational
values in use for this client.

wsAssociatedClientQosCachedStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.7.9.1

Each entry in this table contains client QoS cached status parameters
for a client associated with the WS managed AP. Only those parameters
successfully retrieved from a RADIUS server via 802.1X authentication
on behal…

Indexes

No indexes recorded

Column Syntax OID

wsAssociatedClientQosCachedBandwidthLimitDownobsolete

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.7.9.1.1

wsAssociatedClientQosCachedBandwidthLimitUpobsolete

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.7.9.1.2

wsAssociatedClientQosCachedAccessControlDownTypeobsolete

Access list type used for the wireless down (outbound) direction from
the AP to this client. The wsAssociatedClientQosCachedAccessControlDownName
object identifies the access list.

Enumeration

Enumerated Values:

1	none
2	ip
3	mac
4	ipv6

.1.3.6.1.4.1.207.8.42.8.34.7.9.1.3

wsAssociatedClientQosCachedAccessControlDownNameobsolete

Name of the access list in use in accordance with the
wsAssociatedClientQosCachedAccessControlDownType as follows:

none(1) - This object is not displayed.

ip(2) - This specifies an IP acc…

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.207.8.42.8.34.7.9.1.4

wsAssociatedClientQosCachedAccessControlUpTypeobsolete

Access list type used for the wireless up (inbound) direction from
this client to the AP. The wsAssociatedClientQosCachedAccessControlUpName
object identifies the access list.

Enumeration

Enumerated Values:

1	none
2	ip
3	mac
4	ipv6

.1.3.6.1.4.1.207.8.42.8.34.7.9.1.5

wsAssociatedClientQosCachedAccessControlUpNameobsolete

Name of the access list in use in accordance with the
wsAssociatedClientQosCachedAccessControlUpType as follows:

none(1) - This object is not displayed.

ip(2) - This specifies an IP acces…

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.207.8.42.8.34.7.9.1.6

wsAssociatedClientQosCachedDiffservPolicyDownTypeobsolete

DiffServ policy type used for the wireless down (outbound) direction from
the AP to this client. The wsAssociatedClientQosCachedDiffservPolicyDownName
object identifies the DiffServ policy.

Enumeration

Enumerated Values:

1	none
2	in

.1.3.6.1.4.1.207.8.42.8.34.7.9.1.7

wsAssociatedClientQosCachedDiffservPolicyDownNameobsolete

Name of the DiffServ policy in use in accordance with the
wsAssociatedClientQosCachedDiffservPolicyDownType as follows:

none(1) - This object is not displayed.

in(2) - This specifies a Di…

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.207.8.42.8.34.7.9.1.8

wsAssociatedClientQosCachedDiffservPolicyUpTypeobsolete

DiffServ policy type used for the wireless up (inbound) direction from
this client to the AP. The wsAssociatedClientQosCachedDiffservPolicyUpName
object identifies the DiffServ policy.

Enumeration

Enumerated Values:

1	none
2	in

.1.3.6.1.4.1.207.8.42.8.34.7.9.1.9

wsAssociatedClientQosCachedDiffservPolicyUpNameobsolete

Name of the DiffServ policy in use in accordance with the
wsAssociatedClientQosCachedDiffservPolicyUpType as follows:

none(1) - This object is not displayed.

in(2) - This specifies a Diff…

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.207.8.42.8.34.7.9.1.10

wsPeerStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.8.1 · 1 row entry · 14 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsPeerStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsPeerStatusTable'

This table contain status parameters of peer controllers of wireless controller.

wsPeerStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.8.1.1

Each entry describes the status parameters of each peer of
wireless controller.

Indexes

wsPeerIpAddress

Column Syntax OID

wsPeerIpAddress

IP address of the peer controller.

wsPeerClusterControllerIndicator

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.8.1.1.1

Indicates if the peer controller is currently the Cluster Controller of the peer group or not.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.207.8.42.8.34.8.1.1.2

wsPeerTotalPeerSwitches

Total number of peer controllers detected on the network.

Integer32

Constraints:
range: 0-4

.1.3.6.1.4.1.207.8.42.8.34.8.1.1.3

wsPeerVendorId

Indicates vendor of peer controller software.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.8.1.1.4

wsPeerProtocolVersion

Indicates software version of peer controller.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.8.1.1.5

wsPeerSoftwareVersion

Indicates the protocol version of software on the peer
controller.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.8.1.1.6

wsPeerDiscoveryReason

Indicates the discovery method of peer controller.

Enumeration

Enumerated Values:

1	ip-poll
2	l2-poll

.1.3.6.1.4.1.207.8.42.8.34.8.1.1.7

wsPeerAge

Indicates time in seconds since last communication with the controller.

wsPeerConfigRequestAction

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.8.1.1.8

wsPeerManagedAPCount

Number of APs in the peer managed AP database that are authenticated,
configured, and have an active connection with the wireless controller.

Integer32

Constraints:
range: 0-192

.1.3.6.1.4.1.207.8.42.8.34.8.1.1.9

This action object is used to:
- start - Start the config push into the peer controller.
- Read on this object will always return none.

Enumeration

Enumerated Values:

1	none
2	start

.1.3.6.1.4.1.207.8.42.8.34.8.1.1.10

wsPeerConfigRequestStatus

The status for the configuration push operation to this peer controller.

Enumeration

Enumerated Values:

0	notStarted
1	requested
2	inProgress
3	invalidCodeVersion
4	invalidHwVersion
5	operationInProgress
6	invalidConfig
7	invalidPacketFormat
8	failureTimeout
9	failureGeneric
10	success

.1.3.6.1.4.1.207.8.42.8.34.8.1.1.11

wsPeerConfigSwitchIp

IP Address of the last controller from which this controller received
any wireless configuration data.

wsPeerConfigReceivedTimestamp

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.8.1.1.12

wsPeerConfigReceived

Indicates which portions of configuration were last received from a
peer controller. The combination of configurations are denoted by doing
'AND' of the values.BIT zero is ignored.

Ex: Value 9 specifies o…

Bits

Enumerated Values:

1	none
2	globalConfig
3	discoveryConfig
4	validAPDatabase
5	channelPowerConfig
6	profileNetworkConfig
7	knownClientConfig
8	captivePortalConfig
9	radiusClientConfig
10	qosAclConfig
11	qosDiffServConfig
12	wdsGroupConfig
13	deviceLocationConfig

.1.3.6.1.4.1.207.8.42.8.34.8.1.1.13

The last time this controller received any configuration data from a
peer controller.

wsPeerSwitchIpAddress wsPeerSwitchAPMacAddress

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.42.8.34.8.1.1.14

wsPeerSwitchManagedAPTable

table

.1.3.6.1.4.1.207.8.42.8.34.8.3 · 1 row entry · 7 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsPeerSwitchManagedAPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsPeerSwitchManagedAPTable'

This table contain Managed AP database of the peer controllers of
wireless controller.

wsPeerSwitchManagedAPEntry row .1.3.6.1.4.1.207.8.42.8.34.8.3.1

Each entry describes the Managed AP Entry of the peer of
wireless controller.

Indexes

Column	Syntax	OID
wsPeerSwitchIpAddress The IP Address of the Peer controller.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.207.8.42.8.34.8.3.1.1`
wsPeerSwitchAPMacAddress The VAP0 MAC address of the AP managed by the peer controller.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.8.3.1.2`
wsPeerSwitchAPLocation This object indicates descriptive location of the managed AP by the peer controller.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.207.8.42.8.34.8.3.1.3`
wsPeerSwitchAPIPAddress IP address for the peer managed AP.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.207.8.42.8.34.8.3.1.4`
wsPeerSwitchAPProfileId Unique ID for the peer managed AP's configuration profile.	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.207.8.42.8.34.8.3.1.5`
wsPeerSwitchAPProfileName The descriptive name for the peer managed AP's configuration profile.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.207.8.42.8.34.8.3.1.6`
wsPeerSwitchAPHardwareType The Hardware platform for the AP. 1 --> BROADCOM.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.207.8.42.8.34.8.3.1.7`

wsRFScanAPStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.9.1 · 1 row entry · 23 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsRFScanAPStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsRFScanAPStatusTable'

This table is maintained with RF scan data received
from the WS managed APs.

wsRFScanAPStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.9.1.1

Each entry in this table contain RF scan data received
from the WS managed AP.

Indexes

wsRFScanAPMacAddress

Column Syntax OID

wsRFScanAPMacAddress

The MAC address of the detected AP, this could be a
physical radio interface or VAP MAC.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.1

wsRFScanAPRadioInterface

If status indicates a managed AP, this indicates the
radio interface on the Detected AP, if the value is
unknown (i.e. Rogue or third party APs) it is set to '0'.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.2

wsRFScanAPBaseMacAddress

If status indicates a managed AP, this indicates the
base MAC address of the detected AP, If the value is
unknown (i.e. Rogue of third party AP's) it is set to '0'.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.3

wsRFScanAPSSID

Service Set Id of the detected network.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.4

wsRFScanAPPhysicalMode

Indicates the 802.11 mode being used on an AP.

Enumeration

Enumerated Values:

1	ieee802dot11an
2	ieee802dot11bORgn

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.5

wsRFScanAPChannel

Indicates transmit channel of an AP.

Integer32

Constraints:
range: 0-13
range: 36-36
range: 40-40
range: 44-44
range: 48-48
range: 52-52
range: 56-56
range: 60-60
range: 64-64

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.6

wsRFScanAPTxRate

Indicates the rate at which an AP is currently
transmitting data, from 1 Mbit/s to 600 Mbit/s.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.7

wsRFScanAPBeaconInterval

Indicates beacon interval for a neighbor AP network.

Integer32

Constraints:
range: 20-2000

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.8

wsRFScanAPStatus

Indicates the managed status of an AP.

Enumeration

Enumerated Values:

1	managed
2	unknown
3	standalone
4	rogue

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.9

wsRFScanAPDiscoveredAge

Indicates timestamp in seconds when an AP was first detected.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.10

wsRFScanAPAge

Indicates time in seconds since an AP was last detected in the scan.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.11

wsRFScanAPStatusInitial

Indicates the initial status of an AP.

Enumeration

Enumerated Values:

1	managed
2	unknown
3	standalone
4	rogue

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.12

wsRFScanAPSecurityMode

Indicates the security mode of an AP.

Enumeration

Enumerated Values:

1	open
2	wep
3	wpa

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.13

wsRFScanAPHighRate

Indicates the highest supported rate advertised by an AP in Mbps.

wsRFScanAPRogueMitigation

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.14

wsRFScanAPDot11nMode

Indicates whether 802.11n is supported by an AP.

Enumeration

Enumerated Values:

0	notsupported
1	supported

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.15

wsRFScanAPAdHoc

Indicates that the beacon frame was received from an ad hoc network for an AP.

Enumeration

Enumerated Values:

0	notadhoc
1	adhoc

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.16

wsRFScanAPPeerManaged

Indicates that an AP is managed by a peer controller.

Enumeration

Enumerated Values:

0	localswitch
1	peerswitch

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.17

Indicates whether rogue AP mitigation is in progress for an AP.

Enumeration

Enumerated Values:

0	notrogue
1	inprogress
2	attackdisabled
3	toomany
4	illegalchannel
5	spoofing
6	adhoc

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.18

wsRFScanAPAcknowledgeRogue

This is a command that allows the administrator to restore
the initial status for this AP in the RF Scan database.
Read on this object will always return no-action.

Enumeration

Enumerated Values:

0	no-action
1	acknowledge

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.19

wsRFScanAPBSSID

BSSID advertised in the network.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.20

wsRFScanAPOUI

Manufacturer information for this AP.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.21

wsRFScanAPRRMSupported

Advertised status of Radio Resource Management (RRM) capability.

Enumeration

Enumerated Values:

0	unsupported
1	supported

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.22

wsRFScanAPDot11acMode

Indicates whether 802.11ac is supported by an AP.

Enumeration

Enumerated Values:

0	notsupported
1	supported

.1.3.6.1.4.1.207.8.42.8.34.9.1.1.23

wsFailureAPStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.9.3 · 1 row entry · 13 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsFailureAPStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsFailureAPStatusTable'

This table contain status parameters of APs
that failed to authenticate, or associate with
wireless controller.

wsFailureAPStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.9.3.1

Each entry in this table contain status parameters of failed AP.

Indexes

wsFailedAPMacAddress

Column Syntax OID

wsFailedAPMacAddress

The Ethernet address of the failed AP.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.3.1.1

wsFailedAPIpAddress

The network IP address of the failed AP.

wsFailedAPSoftwareVersion

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.9.3.1.2

wsFailedAPVendorId

Indicates vendor of the failed AP.

Enumeration

Enumerated Values:

1	broadcom
65535	others

.1.3.6.1.4.1.207.8.42.8.34.9.3.1.3

Indicates software version of the failed AP.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.9.3.1.4

wsFailedAPHWType

Indicates hardware type of the failed AP.

Enumeration

Enumerated Values:

1	reserved-1
2	reserved-2
3	reserved-3
4	reserved-4
5	tq3600
6	reserved-6
7	reserved-7
8	tq3200
9	tq2450
10	tq3400
11	reserved-11
12	tq4400
13	tq4600

.1.3.6.1.4.1.207.8.42.8.34.9.3.1.5

wsFailedAPFailureType

Indicates the last type of failure that occured.

Enumeration

Enumerated Values:

1	localAuthentication
2	noDbEntry
3	notManaged
4	radiusAuthentication
5	radiusChallenged
6	radiusUnreachable
7	invalidRadiusResponse
8	invalidProfileId
9	profileMismatch
10	radiusMsgSendFailed
11	noAPImageAvailable

.1.3.6.1.4.1.207.8.42.8.34.9.3.1.6

wsFailedAPValidationFailureCount

Number of times the AP failed to authenticate due to
MAC address validation failure.

wsFailedAPAuthenticationFailureCount

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.3.1.7

Number of times the AP failed to authenticate due to
incorrect authentication credentials.

wsFailedAPProtocolVersion

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.3.1.8

Indicates the protocol version supported by
the software on this AP.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.207.8.42.8.34.9.3.1.9

wsFailedAPAge

Indicates time since failure occured.

wsFailedAPReportingSwitch

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.3.1.10

This object indicates whether the AP failure happened on
this controller or on the peer-controller.

Enumeration

Enumerated Values:

1	local-switch
2	peer-switch

.1.3.6.1.4.1.207.8.42.8.34.9.3.1.11

wsFailedAPSwitchMacAddress

MAC address of the WS reporting the AP Authentication Failure.

wsFailedAPSwitchIpAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.3.1.12

IP address of the WS reporting the AP Authentication Failure.

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.9.3.1.13

wsAdHocClientStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.9.5 · 1 row entry · 5 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAdHocClientStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAdHocClientStatusTable'

This table contains information related to
Ad hoc clients detected in the network.

wsAdHocClientStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.9.5.1

Each entry in this table represents Ad hoc
client detected in the network.

Indexes

wsAdHocClientMacAddress

Column Syntax OID

wsAdHocClientMacAddress

The Ethernet address of the Ad hoc client detected.
If detection Mode is 'Beacon' then the client is
represented as an AP in the RF Scan database and
the Neighbor AP List. If the detection mode is
'Data Frame' then the …

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.5.1.1

wsDetectedAPMacAddress

The MAC address of an AP which last detected the Ad hoc
client.

wsDetectedAPRadioInterface

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.5.1.2

The radio interface of an AP which last detected the Ad hoc
client.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.9.5.1.3

wsAdHocClientDetectionMode

The mechanism through which this Ad hoc device is
detected. This can be through beacon frame or data frame.

Enumeration

Enumerated Values:

1	beacon-frame
2	data-frame

.1.3.6.1.4.1.207.8.42.8.34.9.5.1.4

wsAdHocClientAge

Indicates time since the last detection of this Ad hoc client.

wsAPTriangulationMacAddr wsAPTriangulationId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.5.1.5

wsAPTriangulationNonSentryStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.9.7 · 1 row entry · 8 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPTriangulationNonSentryStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPTriangulationNonSentryStatusTable'

This table contains triangulation data to help the
administrator determine which non-sentry APs are detecting the device.

wsAPTriangulationNonSentryStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.9.7.1

Each entry in this table contains triangulation
information for the RF Scan entry.

Indexes

Column	Syntax	OID
wsAPTriangulationMacAddr The MAC address of the detected AP, this could be a physical radio interface or VAP MAC.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.9.7.1.1`
wsAPTriangulationId Index of the sentry triangulation entry.	Integer32 Constraints: `range: 0-2`	`.1.3.6.1.4.1.207.8.42.8.34.9.7.1.2`
wsAPTriangulationNonSentryMacAddr The MAC address of the detecting AP.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.9.7.1.3`
wsAPTriangulationNonSentryRadio The radio of the detecting AP.	Integer32 Constraints: `range: 1-2`	`.1.3.6.1.4.1.207.8.42.8.34.9.7.1.4`
wsAPTriangulationRssi Received signal strength indicator in percent (0 to 100%).	Integer32 Constraints: `range: 0-100`	`.1.3.6.1.4.1.207.8.42.8.34.9.7.1.5`
wsAPTriangulationStrength Received signal strength in dBm (-127 to 127).	Integer32 Constraints: `range: -127-127`	`.1.3.6.1.4.1.207.8.42.8.34.9.7.1.6`
wsAPTriangulationNoise Noise reported on the channel by the AP in dBm (-127 to 127).	Integer32 Constraints: `range: -127-127`	`.1.3.6.1.4.1.207.8.42.8.34.9.7.1.7`
wsAPTriangulationAge Indicates the age since this device was most recently detected by the detecting AP.	SNMPv2-SMITimeTicks Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.9.7.1.8`

wsAPTriangulationSentryStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.9.8 · 1 row entry · 8 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPTriangulationSentryStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPTriangulationSentryStatusTable'

This table contains triangulation data to help the
administrator determine which sentry APs are detecting the device.

wsAPTriangulationSentryStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.9.8.1

Each entry in this table contains triangulation
information for the RF Scan entry.

Indexes

wsAPSentryTriangulationMacAddr wsAPSentryTriangulationId

Column	Syntax	OID
wsAPSentryTriangulationMacAddr The MAC address of the detected AP, this could be a physical radio interface or VAP MAC.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.9.8.1.1`
wsAPSentryTriangulationId Index of the sentry triangulation entry.	Integer32 Constraints: `range: 0-2`	`.1.3.6.1.4.1.207.8.42.8.34.9.8.1.2`
wsAPSentryTriangulationSentryMacAddr The MAC address of the detecting AP.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.9.8.1.3`
wsAPSentryTriangulationSentryRadio The radio of the detecting AP.	Integer32 Constraints: `range: 1-2`	`.1.3.6.1.4.1.207.8.42.8.34.9.8.1.4`
wsAPSentryTriangulationRssi Received signal strength indicator in percent (0 to 100%).	Integer32 Constraints: `range: 0-100`	`.1.3.6.1.4.1.207.8.42.8.34.9.8.1.5`
wsAPSentryTriangulationStrength Received signal strength in dBm (-127 to 127).	Integer32 Constraints: `range: -127-127`	`.1.3.6.1.4.1.207.8.42.8.34.9.8.1.6`
wsAPSentryTriangulationNoise Noise reported on the channel by the AP in dBm (-127 to 127).	Integer32 Constraints: `range: -127-127`	`.1.3.6.1.4.1.207.8.42.8.34.9.8.1.7`
wsAPSentryTriangulationAge Indicates age since this device was most recently detected by the detecting AP.	SNMPv2-SMITimeTicks Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.9.8.1.8`

wsAPRogueClassificationStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.9.9 · 1 row entry · 10 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPRogueClassificationStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPRogueClassificationStatusTable'

This table contains rogue classification test results.

wsAPRogueClassificationStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.9.9.1

Each entry in this table contains triangulation
information for the RF Scan entry.

Indexes

wsAPRogueClassificationMacAddr wsAPRogueClassificationTestId

Column Syntax OID

wsAPRogueClassificationMacAddr

The MAC address of the detected AP, this could be a
physical radio interface or VAP MAC.

wsAPRogueClassificationTestId

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.9.1.1

The rogue classification test id.

Integer32

Constraints:
range: 0-10

.1.3.6.1.4.1.207.8.42.8.34.9.9.1.2

wsAPRogueClassificationTestName

The rogue classification test identifier.

Enumeration

Enumerated Values:

0	widsaprogue01
1	widsaprogue02
2	widsaprogue03
3	widsaprogue04
4	widsaprogue05
5	widsaprogue06
6	widsaprogue07
7	widsaprogue08
8	widsaprogue09
9	widsaprogue10
10	widsaprogue11

.1.3.6.1.4.1.207.8.42.8.34.9.9.1.3

wsAPRogueClassificationDetected

Indicates whether this test detected the condition
that it is designed to detect.

Enumeration

Enumerated Values:

0	notdetected
1	detected

.1.3.6.1.4.1.207.8.42.8.34.9.9.1.4

wsAPRogueClassificationReportingAPMac

The MAC address of the managed AP that last
reported detecting this condition.

wsAPRogueClassificationReportingAPRadio

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.9.1.5

The radio number of the managed AP that last
reported detecting this condition. Zero
indicates no report available

Integer32

Constraints:
range: 0-2

.1.3.6.1.4.1.207.8.42.8.34.9.9.1.6

wsAPRogueClassificationTestState

Indicates whether this test is configured to report rogues.

Enumeration

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.207.8.42.8.34.9.9.1.7

wsAPRogueClassificationTestResult

Indicates whether this test reported the device as rogue.

Enumeration

Enumerated Values:

0	notreported
1	roguereported

.1.3.6.1.4.1.207.8.42.8.34.9.9.1.8

wsAPRogueClassificationFirstTime

Indicates how long ago this test first detected the condition.

wsAPRogueClassificationLastTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.9.1.9

Indicates how long ago this test last detected the condition.

wsAPDeAuthenticationAttackStatusId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.9.1.10

wsAPDeAuthenticationAttackStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.9.10 · 1 row entry · 5 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPDeAuthenticationAttackStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPDeAuthenticationAttackStatusTable'

This table contains the AP de-authentication attack status.

wsAPDeAuthenticationAttackStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.9.10.1

This table contains information about APs against which
the Cluster Controller initiated a de-authentication attack.

Indexes

Column	Syntax	OID
wsAPDeAuthenticationAttackStatusId The AP de-authentication attack status table index.	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.207.8.42.8.34.9.10.1.1`
wsAPDeAuthenticationAttackBSSID BSSID of the AP against which the attack is launched.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.9.10.1.2`
wsAPDeAuthenticationAttackChannel Channel on which the rogue AP is operating.	Integer32 Constraints: `range: 1-161`	`.1.3.6.1.4.1.207.8.42.8.34.9.10.1.3`
wsAPDeAuthenticationAttackTime Time since attack started on this AP.	SNMPv2-SMITimeTicks Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.9.10.1.4`
wsAPDeAuthenticationAttackAge Time since RF Scan report about this AP.	SNMPv2-SMITimeTicks Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.9.10.1.5`

wsDetectedClientStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.9.11 · 1 row entry · 33 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsDetectedClientStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsDetectedClientStatusTable'

This table contains status parameters of clients that are
currently detected.

wsDetectedClientStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.9.11.1

Each entry in this table contains detected client status
parameters.

Indexes

wsDetectedClientMacAddress

Column Syntax OID

wsDetectedClientMacAddress

Detected client MAC address.

wsDetectedClientAuthStatus

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.1

wsDetectedClientStatus

This object indicates client's status.
Authenticated- Client is Authenticated with the
system and is not Rogue
Detected- Client is detected, not Authenticated,
not rogue, and is not found i…

Enumeration

Enumerated Values:

0	authenticated
1	detected
2	known
3	black-listed
4	rogue

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.2

This object indicates client's authentication status.
Note that the Client Status can be Rogue, but the client
can be Authenticated.

Enumeration

Enumerated Values:

0	not-authenticated
1	authenticated

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.3

wsDetectedClientEntryLastUpdatedAt

This object indicates time since any event has been received
for this client that updated the detected client database entry.

wsDetectedClientThreatDetectedStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.4

This object indicates if any one of the threat detection tests
have been triggered for this client. If the test is disabled the
client won't be marked as Rogue, but administrator may still be
interested in investigating…

Enumeration

Enumerated Values:

0	not-detected
1	detected

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.5

wsDetectedClientThreatMitigationStatus

This object indicates whether threat mitigation has been
done for this client.

Enumeration

Enumerated Values:

0	not-done
1	done

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.6

wsDetectedClientName

Nickname from the Known Client Database. If client is not
in the database then the nickname is blank.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.7

wsDetectedClientEntryCreateTime

Indicates the time the detected client entry was
created.

wsDetectedClientAuthSignal

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.8

wsDetectedClientChannel

this object indicates channel number in which the client is dtected

Unsigned32

Constraints:
range: 0-100

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.9

wsDetectedClientAuthRSSI

If the client is authenticated with the managed AP then this
object indicates Received Signal Strength(RSSI) value reported
by the AP with which the client is authenticated.

Unsigned32

Constraints:
range: 0-100

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.10

This object indicates the last signal strength(in dBm)
reported by the managed AP with which the client is authenticated.

Integer32

Constraints:
range: -128-128

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.11

wsDetectedClientAuthNoise

This object indicates the last channel noise(in dBm)
reported by the managed AP with which the client is authenticated.

Integer32

Constraints:
range: -128-128

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.12

wsDetectedClientProbeReqRecorded

This object indicates the number of probe requests
recorded so far during the probe collection interval.

wsDetectedClientProbeCollectionIntvl

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.13

This object indicates how much time is left before the
probe collection interval is done and the controller decides
whether the client is a threat.

wsDetectedClientHighestNumProbes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.14

This object indicates the largest number of probes that
the controller detected during the collection interval.

wsDetectedClientAuthMsgsRecorded

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.15

This object indicates the number of 802.11 authentication
messages recorded so far during the auth collection interval.

wsDetectedClientAuthCollectionIntvl

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.16

This object indicates how much time is left before the
authentication collection interval is done and the controller decides
whether the client is a threat.

wsDetectedClientHighestNumAuthMsgs

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.17

This object indicates the largest number of authentications that
the controller detected during the collection interval.

wsDetectedClientDeAuthMsgsRecorded

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.18

This object indicates the number of 802.11 de-authentication
messages recorded so far during the de-auth collection interval.

wsDetectedClientDeAuthCollectionIntvl

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.19

This object indicates how much time is left before the
de-authentication collection interval is done and the controller decides
whether the client is a threat.

wsDetectedClientHighestNumDeAuthMsgs

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.20

This object indicates the largest number of de-authentication
messages that the controller detected during the collection interval.

wsDetectedClientAuthFailures

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.21

This object indicates the number of 802.1X Authentication
failures detected for this client.

wsDetectedClientProbesDetected

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.22

This object indicates the number of probes detected in the last RF Scan.

wsDetectedClientBcastBSSIDProbes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.23

This object indicates the number of probes to broadcast
BSSID in the last RF Scan.

wsDetectedClientBcastSSIDProbes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.24

This object indicates the number of probes to broadcast
SSID in the last RF Scan.

wsDetectedClientSpecificBSSIDProbes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.25

This object indicates the number of probes to specific
BSSID in the last RF Scan.

wsDetectedClientSpecificSSIDProbes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.26

This object indicates the number of probes to specific
SSID in the last RF Scan.

wsDetectedClientLastNonBcastBSSID

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.27

This object indicates the last non-broadcast BSSID
detected in the RF Scan.

wsDetectedClientLastNonBcastSSID

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.28

This object indicates the last non-broadcast SSID
detected in the RF Scan.

wsDetectedClientThreatMitigationSent

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.29

This object indicates the time since the controller sent
the last threat mitigation message to this client.

wsDetectedClientEntryPurge

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.30

This is an action object. Setting this object to
enable will purge the detected client entry
except entries for authenticated clients.
Read on this object will always return disable.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.31

wsDetectedClientEntryAcknowledge

This is a command that allows the administrator
to clear the rogue status for the entry in the
Detected clients database

Enumeration

Enumerated Values:

0	no-action
1	acknowledge

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.32

wsDetectedClientOUI

Device manufacturer information for this Detected client.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.207.8.42.8.34.9.11.1.33

wsClientRogueClassificationStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.9.14 · 1 row entry · 10 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsClientRogueClassificationStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsClientRogueClassificationStatusTable'

This table contains rogue classification test results for clients.

wsClientRogueClassificationStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.9.14.1

Each entry in this table contains rogue classification
test results for a client.

Indexes

wsClientRogueClassificationMacAddr wsClientRogueClassificationTestId

Column Syntax OID

wsClientRogueClassificationMacAddr

The MAC address of the detected client.

wsClientRogueClassificationTestId

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.14.1.1

The rogue classification test id.

Integer32

Constraints:
range: 0-10

.1.3.6.1.4.1.207.8.42.8.34.9.14.1.2

wsClientRogueClassificationTestName

The rogue classification test identifier.

Enumeration

Enumerated Values:

0	widsclientrogue01
1	widsclientrogue02
2	widsclientrogue03
3	widsclientrogue04
4	widsclientrogue05
5	widsclientrogue06
6	widsclientrogue07

.1.3.6.1.4.1.207.8.42.8.34.9.14.1.3

wsClientRogueClassificationDetected

Indicates whether this test detected the condition
that it is designed to detect.

Enumeration

Enumerated Values:

0	notdetected
1	detected

.1.3.6.1.4.1.207.8.42.8.34.9.14.1.4

wsClientRogueClassificationReportingAPMac

The MAC address of the managed AP that last
reported detecting this condition.

wsClientRogueClassificationReportingAPRadio

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.14.1.5

The radio number of the managed AP that last
reported detecting this condition. Zero
indicates no report available

Integer32

Constraints:
range: 0-2

.1.3.6.1.4.1.207.8.42.8.34.9.14.1.6

wsClientRogueClassificationTestState

Indicates whether this test is configured to report rogues.

Enumeration

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.207.8.42.8.34.9.14.1.7

wsClientRogueClassificationTestResult

Indicates whether this test reported the device as rogue.

Enumeration

Enumerated Values:

0	notreported
1	roguereported

.1.3.6.1.4.1.207.8.42.8.34.9.14.1.8

wsClientRogueClassificationFirstTime

Indicates how long ago this test first detected the condition.

wsClientRogueClassificationLastTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.14.1.9

Indicates how long ago this test last detected the condition.

wsDetectedClientTriangulationMacAddr wsDetectedClientTriangulationId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.14.1.10

wsDetectedClientTriangulationNonSentryStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.9.15 · 1 row entry · 8 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsDetectedClientTriangulationNonSentryStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsDetectedClientTriangulationNonSentryStatusTable'

This table contains triangulation data to help the
administrator determine which three managed non-sentry
APs are detecting the client along with the signal
strength and the time stamp.

wsDetectedClientTriangulationNonSentryStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.9.15.1

Each entry in this table contains triangulation
information for the Detected Client entry.

Indexes

Column	Syntax	OID
wsDetectedClientTriangulationMacAddr The MAC address of the Detected Client.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.9.15.1.1`
wsDetectedClientTriangulationId Index of the non sentry triangulation entry.	Integer32 Constraints: `range: 0-2`	`.1.3.6.1.4.1.207.8.42.8.34.9.15.1.2`
wsDetectedClientTriangulationNonSentryMacAddr The MAC address of the detecting AP.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.9.15.1.3`
wsDetectedClientTriangulationNonSentryRadio The radio of the detecting AP.	Integer32 Constraints: `range: 1-2`	`.1.3.6.1.4.1.207.8.42.8.34.9.15.1.4`
wsDetectedClientTriangulationRssi Received signal strength indicator in percent (0 to 100%).	Integer32 Constraints: `range: 0-100`	`.1.3.6.1.4.1.207.8.42.8.34.9.15.1.5`
wsDetectedClientTriangulationStrength Received signal strength in dBm (-127 to 127).	Integer32 Constraints: `range: -127-127`	`.1.3.6.1.4.1.207.8.42.8.34.9.15.1.6`
wsDetectedClientTriangulationNoise Noise reported on the channel by the AP in dBm (-127 to 127).	Integer32 Constraints: `range: -127-127`	`.1.3.6.1.4.1.207.8.42.8.34.9.15.1.7`
wsDetectedClientTriangulationAge Indicates the time since this device was most recently detected by the detecting AP.	SNMPv2-SMITimeTicks Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.9.15.1.8`

wsDetectedClientTriangulationSentryStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.9.16 · 1 row entry · 8 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsDetectedClientTriangulationSentryStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsDetectedClientTriangulationSentryStatusTable'

This table contains triangulation data to help the
administrator determine which three managed sentry
APs are detecting the client along with the signal
strength and the time stamp.

wsDetectedClientTriangulationSentryStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.9.16.1

Each entry in this table contains triangulation
information for the Detected Client entry.

Indexes

wsDetectedClientSentryTriangulationMacAddr wsDetectedClientSentryTriangulationId

Column	Syntax	OID
wsDetectedClientSentryTriangulationMacAddr The MAC address of the detected client.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.9.16.1.1`
wsDetectedClientSentryTriangulationId Index of the sentry triangulation entry.	Integer32 Constraints: `range: 0-2`	`.1.3.6.1.4.1.207.8.42.8.34.9.16.1.2`
wsDetectedClientSentryTriangulationSentryMacAddr The MAC address of the AP detecting the client.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.9.16.1.3`
wsDetectedClientSentryTriangulationSentryRadio The radio of the AP detecting the client.	Integer32 Constraints: `range: 1-2`	`.1.3.6.1.4.1.207.8.42.8.34.9.16.1.4`
wsDetectedClientSentryTriangulationRssi Received signal strength indicator in percent (0 to 100%).	Integer32 Constraints: `range: 0-100`	`.1.3.6.1.4.1.207.8.42.8.34.9.16.1.5`
wsDetectedClientSentryTriangulationStrength Received signal strength in dBm (-127 to 127).	Integer32 Constraints: `range: -127-127`	`.1.3.6.1.4.1.207.8.42.8.34.9.16.1.6`
wsDetectedClientSentryTriangulationNoise Noise reported on the channel by the AP in dBm (-127 to 127).	Integer32 Constraints: `range: -127-127`	`.1.3.6.1.4.1.207.8.42.8.34.9.16.1.7`
wsDetectedClientSentryTriangulationAge Indicates time since this device was most recently detected by the detecting AP.	SNMPv2-SMITimeTicks Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.9.16.1.8`

wsDetectedClientPreAuthenticationHistoryTable

table

.1.3.6.1.4.1.207.8.42.8.34.9.17 · 1 row entry · 8 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsDetectedClientPreAuthenticationHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsDetectedClientPreAuthenticationHistoryTable'

This table contains pre-authentication history entries for
detected clients.

wsDetectedClientPreAuthenticationHistoryEntry row .1.3.6.1.4.1.207.8.42.8.34.9.17.1

Each entry in this table contains details of pre-authentication
events occured for the detected client.

Indexes

wsDetectedClientPreAuthenticationMacAddr wsDetectedClientPreAuthenticationId

Column Syntax OID

wsDetectedClientPreAuthenticationMacAddr

The MAC address of the detected client.

wsDetectedClientPreAuthenticationId

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.17.1.1

Numeric identifier for the preAuthentication entry.

wsDetectedClientPreAuthenticationApMac

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.17.1.2

The Ethernet address of the AP with which client has pre-authenticated.

wsDetectedClientPreAuthenticationApRadioId

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.17.1.3

The radio number of this radio in the AP with which client has
pre-authenticated.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.9.17.1.4

wsDetectedClientPreAuthenticationVapMac

The MAC address of the VAP to which client has roamed.

wsDetectedClientPreAuthenticationSSID

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.17.1.5

This object indicates the SSID used by the VAP.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.9.17.1.6

wsDetectedClientPreAuthenticationAge

Indicates time since this history event occured.

wsDetectedClientPreAuthenticationStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.17.1.7

Designates the pre-authentication operational status for
this detected client.

Enumeration

Enumerated Values:

0	success
1	failure

.1.3.6.1.4.1.207.8.42.8.34.9.17.1.8

wsDetectedClientRoamHistoryTable

table

.1.3.6.1.4.1.207.8.42.8.34.9.19 · 1 row entry · 8 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsDetectedClientRoamHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsDetectedClientRoamHistoryTable'

This table contains roam history entries for detected clients.

wsDetectedClientRoamHistoryEntry row .1.3.6.1.4.1.207.8.42.8.34.9.19.1

Each entry in this table contains details of roam
events occured for the detected client.

Indexes

wsDetectedClientRoamMacAddr wsDetectedClientRoamId

Column Syntax OID

wsDetectedClientRoamMacAddr

The MAC address of the detected client.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.19.1.1

wsDetectedClientRoamId

Numeric identifier for the Roam entry.

wsDetectedClientRoamApMac

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.19.1.2

The Ethernet address of the AP to which client has roamed.

wsDetectedClientRoamApRadioId

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.19.1.3

The radio number of this radio in the AP with which client has
roamed.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.9.19.1.4

wsDetectedClientRoamVapMac

The MAC address of the VAP to which client has roamed.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.9.19.1.5

wsDetectedClientRoamSSID

This object indicates the SSID used by the VAP.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.9.19.1.6

wsDetectedClientRoamAge

Indicates time since this roam history event occured.

wsDetectedClientRoamStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.9.19.1.7

Designates the roaming operational status for
this detected client.

Enumeration

Enumerated Values:

1	newAuthentication
2	roam

.1.3.6.1.4.1.207.8.42.8.34.9.19.1.8

wsAPHardwareCapabilityTable

table

.1.3.6.1.4.1.207.8.42.8.34.12.1 · 1 row entry · 5 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPHardwareCapabilityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPHardwareCapabilityTable'

This table defines supported features for APs of specific
hardware type. This is a read only table and is used by
application to validate parameters

wsAPHardwareCapabilityEntry row .1.3.6.1.4.1.207.8.42.8.34.12.1.1

Each entry provides access point hardware type details for each
AP hardware type supported by the WS.

Indexes

wsAPHWTypeID

Column Syntax OID

wsAPHWTypeID

Numeric identifier for the AP hardware type.

Integer32

Constraints:
range: 1-13

.1.3.6.1.4.1.207.8.42.8.34.12.1.1.1

wsAPHWTypeDescription

Descriptive name of the AP hardware type.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.207.8.42.8.34.12.1.1.2

wsAPHWTypeRadioCount

Number of radios supported by this hardware type AP.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.12.1.1.3

wsAPHWTypeID wsAPHWTypeRadioNum

Image type for code download for this hardware type AP.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.12.1.1.4

wsAPHWDualBootSuppport

Dual boot support for this hardware type AP.

Enumeration

Enumerated Values:

0	notsupported
1	supported

.1.3.6.1.4.1.207.8.42.8.34.12.1.1.5

wsAPHardwareRadioCapabilityTable

table

.1.3.6.1.4.1.207.8.42.8.34.12.2 · 1 row entry · 8 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPHardwareRadioCapabilityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPHardwareRadioCapabilityTable'

The AP harware radio capability table contain only those
parameters that vary from one AP hardware type to another.
Parameters that don't vary depending on AP type or radio type
are not included in the table.This read-only table provides the
user to view configurable parameters for the APs of specific
hardware type through the profile.

wsAPHardwareRadioCapabilityEntry row .1.3.6.1.4.1.207.8.42.8.34.12.2.1

Each entry provides radio capability details for each AP hardware
type supported by the WS.

Indexes

Column Syntax OID

wsAPHWTypeRadioNum

The radio number of this radio in the AP.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.12.2.1.1

wsAPHWTypeRadioID

The device id for this radio in the AP.

Integer32

Constraints:
range: 1-43421

.1.3.6.1.4.1.207.8.42.8.34.12.2.1.2

wsAPHWTypeRadioDescription

Text description of this radio type.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.207.8.42.8.34.12.2.1.3

wsAPHWTypeRadioVapCount

Number of virtual access points supported by this radio.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.207.8.42.8.34.12.2.1.4

wsAPHWTypeRadioAmodeSupport

Flag indicating whether this radio supports 802.11a mode.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.12.2.1.5

wsAPHWTypeRadioBGmodeSupport

Flag indicating whether this radio supports 802.11bg mode.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.12.2.1.6

wsAPHWTypeRadioNmodeSupport

Flag indicating whether this radio supports 802.11n
configuration parameters.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.12.2.1.7

wsAPHWTypeRadioACmodeSupport

Flag indicating whether this radio supports 802.11ac
configuration parameters.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.12.2.1.8

wsAPImageTypeCapabilityTable

table

.1.3.6.1.4.1.207.8.42.8.34.12.3 · 1 row entry · 1 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPImageTypeCapabilityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPImageTypeCapabilityTable'

This table defines supported image types for APs. This is a read
only table and is used by application to view possible image types

wsAPImageTypeCapabilityEntry row .1.3.6.1.4.1.207.8.42.8.34.12.3.1

Each entry provides access point image type details for each
AP image type supported by the WS.

Indexes

Column	Syntax	OID
wsAPImageTypeDescription Descriptive name of the AP image type.	OctetString Constraints: `range: 1-96`	`.1.3.6.1.4.1.207.8.42.8.34.12.3.1.1`

wsAPImageAvailabilityTable

table

.1.3.6.1.4.1.207.8.42.8.34.12.4 · 1 row entry · 1 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPImageAvailabilityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPImageAvailabilityTable'

This table lists the wireless controller stored AP code images.

wsAPImageAvailabilityEntry row .1.3.6.1.4.1.207.8.42.8.34.12.4.1

Each entry provides the code version of an AP image stored on the wireless controller.

Indexes

wsL2CentTnnlVlanRowStatus

Column	Syntax	OID
wsAPImageAvailability The code version of each AP image stored on the wireless controller.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.207.8.42.8.34.12.4.1.1`

wsL2CentTnnlVlanListTable

table

.1.3.6.1.4.1.207.8.42.8.34.13.1 · 1 row entry · 2 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsL2CentTnnlVlanListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsL2CentTnnlVlanListTable'

This table contains the list of layer 2 tunneled VLANs.

wsL2CentTnnlVlanListEntry row .1.3.6.1.4.1.207.8.42.8.34.13.1.1

A list of VLANs on which all frames are tunneled.
The entries in this table are limited to 64.

Indexes

wsL2CentTnnlVlanId

Column Syntax OID

wsL2CentTnnlVlanId

VLAN ID on which all frames are tunneled.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.207.8.42.8.34.13.1.1.1

This variable is used to create and delete entries
in the table.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.207.8.42.8.34.13.1.1.2

wsOuiTable

table

.1.3.6.1.4.1.207.8.42.8.34.14.1 · 1 row entry · 3 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsOuiTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsOuiTable'

This table contains the list of OUIs that have been configured by
the administrator. The entries in this table are limited to 64.

wsOuiEntry row .1.3.6.1.4.1.207.8.42.8.34.14.1.1

A list of OUIs. Each entry contains OUI and descriptive name of the
wireless device manufacturer. The administrator can enter up to 64
user-defined OUIs.

Indexes

wsOuiValue

Column Syntax OID

wsOuiValue

The OUI value for the AP or the client. Least significant bit of
the first byte must be zero.

WsOui

Type Constraints:
range: 3

.1.3.6.1.4.1.207.8.42.8.34.14.1.1.1

wsOuiDescription

The descriptive name for the manufacturer of AP or wireless client adapter.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.207.8.42.8.34.14.1.1.2

wsOuiRowStatus

This variable is used to create and delete entries
in the table.

wsRrmNeighborApMacAddr wsRrmNeighborVapMacAddr wsRrmNeighborMacAddr

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.207.8.42.8.34.14.1.1.3

wsRrmNeighborTable

table

.1.3.6.1.4.1.207.8.42.8.34.15.1 · 1 row entry · 10 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsRrmNeighborTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsRrmNeighborTable'

This table displays the known neighbors of each AP/VAP pair as
reported through RF scans that conform to the IEEE 802.11k standards
for Radio Resource Measurement (RRM).

wsRrmNeighborEntry row .1.3.6.1.4.1.207.8.42.8.34.15.1.1

Each entry provides information regarding known neighboring
APs that may be suitable for client roaming.

Indexes

Column Syntax OID

wsRrmNeighborApMacAddr

The MAC address of the managed AP that detected the neighbor.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.15.1.1.1

wsRrmNeighborVapMacAddr

The MAC address of the VAP that detected the neighbor.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.15.1.1.2

wsRrmNeighborMacAddr

The MAC address of the detected neighbor.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.15.1.1.3

wsRrmNeighborRSSI

The RSSI (signal strength) of the detected neighbor.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.207.8.42.8.34.15.1.1.4

wsRrmNeighborSSID

The SSID of the detected neighbor.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.15.1.1.5

wsRrmNeighborChannel

The channel of the detected neighbor.

Integer32

.1.3.6.1.4.1.207.8.42.8.34.15.1.1.6

wsRrmNeighborAge

The age, in seconds, of this table entry for the detected neighbor.

wsRrmChannelLoadHistoryEntryId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.15.1.1.7

wsRrmNeighborAllPurge

This is an action object used to purge all neighbors.
Reads on this object will always return disable.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.15.1.1.8

wsRrmNeighborApPurge

This is an action object used to purge all neighbors
detected by the managed AP described by this entry.
Reads on this object will always return disable.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.15.1.1.9

wsRrmNeighborVapPurge

This is an action object used to purge all neighbors
detected by the VAP described by this entry.
Reads on this object will always return disable.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.15.1.1.10

wsRrmChannelLoadHistoryTable

table

.1.3.6.1.4.1.207.8.42.8.34.16.1 · 1 row entry · 7 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsRrmChannelLoadHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsRrmChannelLoadHistoryTable'

This table displays the known channel load measurement history items.
Channel load measurements are part of the IEEE 802.11k standards
for Radio Resource Measurement (RRM).

wsRrmChannelLoadHistoryEntry row .1.3.6.1.4.1.207.8.42.8.34.16.1.1

Each entry provides information regarding previous channel load
measurement reports from clients .

Indexes

Column	Syntax	OID
wsRrmChannelLoadHistoryEntryId A unique identifier for a history entry.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.16.1.1.1`
wsRrmChannelLoadHistoryEntryApMacAddr The MAC address of the managed AP associated to the client.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.16.1.1.2`
wsRrmChannelLoadHistoryEntryClientMacAddr The MAC address of client that conducted the measurement.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.16.1.1.3`
wsRrmChannelLoadHistoryEntryChannel The channel used for the measurement.	Unsigned32 Constraints: `range: 0-14` `range: 36-36` `range: 40-40` `range: 42-42` `range: 44-44` `range: 48-48` `range: 50-50` `range: 52-52` `range: 56-56` `range: 58-58` `range: 60-60` `range: 64-64` `range: 100-100` `range: 104-104` `range: 108-108` `range: 112-112` `range: 116-116` `range: 120-120` `range: 124-124` `range: 128-128` `range: 132-132` `range: 136-136` `range: 140-140` `range: 149-149` `range: 152-153` `range: 157-157` `range: 160-161` `range: 165-165`	`.1.3.6.1.4.1.207.8.42.8.34.16.1.1.4`
wsRrmChannelLoadHistoryEntryAge The age of the measurement history entry.	SNMPv2-SMITimeTicks Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.16.1.1.5`
wsRrmChannelLoadHistoryEntryLoad The measured load, expressed as a percentage.	Unsigned32 Constraints: `range: 0-100`	`.1.3.6.1.4.1.207.8.42.8.34.16.1.1.6`
wsRrmChannelLoadHistoryEntryDuration The duration of the measurement, expressed in time units (TUs), where one TU equals 1024 microseconds.	Unsigned32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.207.8.42.8.34.16.1.1.7`

wsGlobalTspecStatisticsTable

table

.1.3.6.1.4.1.207.8.42.8.34.17.1.2 · 1 row entry · 9 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsGlobalTspecStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsGlobalTspecStatisticsTable'

This table contains global TSPEC statistics indexed
on a per access category (AC) basis.

wsGlobalTspecStatisticsEntry row .1.3.6.1.4.1.207.8.42.8.34.17.1.2.1

Each entry contains global TSPEC statistics indexed
on a per access category (AC) basis for the wireless
controller. If this controller is a Cluster Controller, these
object values represent the entire cluster.

Indexes

wsTspecACIndex

Column Syntax OID

wsTspecACIndex

Access category (AC) index used for referencing objects in the
table row. Only those ACs that support mandatory admission control
are available through this index. The currently supported AC index
values are:
0 -…

TspecSuppAC

Type Values:

0	voice
1	video

.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1.1

wsTotalWLANTspecPktsRecvd

Total packets received across all APs managed by
this controller for all traffic streams belonging to
the specified access category.

wsTotalWLANTspecPktsTransmitted

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1.2

Total packets transmitted across all APs managed by
this controller for all traffic streams belonging to
the specified access category.

wsTotalWLANTspecBytesRecvd

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1.3

Total bytes received across all APs managed by
this controller for all traffic streams belonging to
the specified access category.

wsTotalWLANTspecBytesTransmitted

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1.4

Total bytes transmitted across all APs managed by
this controller for all traffic streams belonging to
the specified access category.

wsTotalWLANTspecsAccepted

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1.5

Total number of TSPECs accepted across all APs managed by
this controller for the specified access category.

wsTotalWLANTspecsRejected

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1.6

Total number of TSPECs rejected across all APs managed by
this controller for the specified access category.

wsTotalWLANRoamingTspecsAccepted

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1.7

Total number of TSPECs accepted from roaming clients across
all APs managed by this controller for the specified
access category.

The value of this object is also included in the
wsTotalWLANTspecsAccepted…

wsTotalWLANRoamingTspecsRejected

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1.8

Total number of TSPECs rejected from roaming clients across
all APs managed by this controller for the specified
access category.

The value of this object is also included in the
wsTotalWLANTspecsRejected…

wsSwitchIPAddress wsTspecACIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1.9

wsSwitchTspecStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.17.2.1 · 1 row entry · 4 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsSwitchTspecStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsSwitchTspecStatusTable'

This table contains TSPEC status parameters
for peer controllers of the wireless controller.

wsSwitchTspecStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.17.2.1.1

Each entry describes the TPEC status parameters
for a specific peer of the wireless controller.

Indexes

wsSwitchIPAddress

Column	Syntax	OID
wsSwitchTspecTotalVoiceTrafficStreams Total number of traffic streams currently established for the voice access category for the specified controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.17.2.1.1.1`
wsSwitchTspecTotalVideoTrafficStreams Total number of traffic streams currently established for the video access category for the specified controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.17.2.1.1.2`
wsSwitchTspecTotalTrafficStreamClients Total number of clients that currently possess one or more traffic streams in any access category for the specified controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.17.2.1.1.3`
wsSwitchTspecTotalTrafficStreamRoamingClients Total number of roaming clients that currently possess one or more traffic streams in any access category for the specified controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.17.2.1.1.4`

wsSwitchTspecStatisticsTable

table

.1.3.6.1.4.1.207.8.42.8.34.17.2.2 · 1 row entry · 8 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsSwitchTspecStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsSwitchTspecStatisticsTable'

This table contains WLAN TSPEC statistics on a per access category (AC)
basis for each controller in the peer group. Only the Cluster Controller
maintains entries for peer controllers. A non-Cluster Controller controller
just keeps its local statistics.

wsSwitchTspecStatisticsEntry row .1.3.6.1.4.1.207.8.42.8.34.17.2.2.1

Each entry contains WLAN TSPEC statistics on a per access category (AC)
basis for the specified wireless controller.

Indexes

Column	Syntax	OID
wsSwitchWLANTspecPktsRecvd Total packets received across all APs managed by this controller for all traffic streams belonging to the specified access category.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.2.2.1.1`
wsSwitchWLANTspecPktsTransmitted Total packets transmitted across all APs managed by this controller for all traffic streams belonging to the specified access category.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.2.2.1.2`
wsSwitchWLANTspecBytesRecvd Total bytes received across all APs managed by this controller for all traffic streams belonging to the specified access category.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.2.2.1.3`
wsSwitchWLANTspecBytesTransmitted Total bytes transmitted across all APs managed by this controller for all traffic streams belonging to the specified access category.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.2.2.1.4`
wsSwitchWLANTspecsAccepted Total number of TSPECs accepted across all APs managed by this controller for the specified access category.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.17.2.2.1.5`
wsSwitchWLANTspecsRejected Total number of TSPECs rejected across all APs managed by this controller for the specified access category.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.17.2.2.1.6`
wsSwitchWLANRoamingTspecsAccepted Total number of TSPECs accepted from roaming clients across all APs managed by this controller for the specified access category. This value of this object is also included in the wsSwitchWLANTspecsAccept…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.17.2.2.1.7`
wsSwitchWLANRoamingTspecsRejected Total number of TSPECs rejected from roaming clients across all APs managed by this controller for the specified access category. The value of this object is also included in the wsSwitchWLANTspecsRejecte…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.17.2.2.1.8`

wsManagedAPTspecStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.17.3.1 · 1 row entry · 3 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsManagedAPTspecStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsManagedAPTspecStatusTable'

This table contains TSPEC status parameters for all APs
managed by the controller.

wsManagedAPTspecStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.17.3.1.1

Each entry in this table contains TSPEC status parameters for
a specific AP managed by the controller.

Indexes

wsManagedAPMacAddress wsTspecACIndex

Column	Syntax	OID
wsManagedAPTspecNumActiveTrafficStreams Indicates the current number of active traffic streams (TSs) for the specified access category of the WS managed AP.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.1.1.1`
wsManagedAPTspecNumTrafficStreamClients Indicates the current number of clients with at least one active traffic stream (TS) for the specified access category of the WS managed AP.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.1.1.2`
wsManagedAPTspecNumTrafficStreamRoamingClients Indicates the current number of roaming clients with at least one active traffic stream (TS) for the specified access category of the WS managed AP. The value of this object is also included in the wsMana…	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.1.1.3`

wsManagedAPTspecStatisticsTable

table

.1.3.6.1.4.1.207.8.42.8.34.17.3.2 · 1 row entry · 8 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsManagedAPTspecStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsManagedAPTspecStatisticsTable'

This table contains TSPEC statistics available for all APs
managed by the controller.

wsManagedAPTspecStatisticsEntry row .1.3.6.1.4.1.207.8.42.8.34.17.3.2.1

Each entry in this table contains TSPEC statistics for
a specific AP managed by the controller.

Indexes

No indexes recorded

Column	Syntax	OID
wsManagedAPTspecPktsRecvd Total packets received by this AP on the wireless network for all traffic streams belonging to the specified access category.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.2.1.1`
wsManagedAPTspecPktsTransmitted Total packets transmitted by this AP on the wireless network for all traffic streams belonging to the specified access category.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.2.1.2`
wsManagedAPTspecBytesRecvd Total bytes received by this AP on the wireless network for all traffic streams belonging to the specified access category.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.2.1.3`
wsManagedAPTspecBytesTransmitted Total bytes transmitted by this AP on the wireless network for all traffic streams belonging to the specified access category.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.2.1.4`
wsManagedAPTspecsAccepted Total number of TSPECs accepted by this AP on the wireless network for the specified access category.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.2.1.5`
wsManagedAPTspecsRejected Total number of TSPECs rejected by this AP on the wireless network for the specified access category.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.2.1.6`
wsManagedAPRoamingTspecsAccepted Total number of TSPECs accepted from roaming clients by an AP on the wireless network for the specified access category. This value of this object is also included in the wsManagedAPTspecsAccepted object.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.2.1.7`
wsManagedAPRoamingTspecsRejected Total number of TSPECs rejected from roaming clients by an AP on the wireless network for the specified access category. This value of this object is also included in the wsManagedAPTspecsRejected object.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.2.1.8`

wsManagedAPRadioTspecStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.17.3.3 · 1 row entry · 7 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsManagedAPRadioTspecStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsManagedAPRadioTspecStatusTable'

This table contains TSPEC status parameters per radio interface
for all APs managed by the controller.

wsManagedAPRadioTspecStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.17.3.3.1

Each entry in this table contains TSPEC status parameters
per radio interface for a specific AP managed by the controller.

Indexes

wsManagedAPMacAddress wsManagedAPRadioInterface wsTspecACIndex

Column Syntax OID

wsManagedAPRadioTspecOperStatus

Indicates the current operational status for the specified
access category on this radio. If enabled(1),
this access category operates in accordance with admission
control mandatory (ACM) procedures.

Enumeration

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.207.8.42.8.34.17.3.3.1.1

wsManagedAPRadioTspecNumActiveTrafficStreams

Indicates the current number of active traffic streams (TSs)
for the specified access category on this radio.

wsManagedAPRadioTspecNumTrafficStreamClients

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.3.3.1.2

Indicates the current number of clients with at least one
active traffic stream (TS) for the specified access category
on this radio.

wsManagedAPRadioTspecNumTrafficStreamRoamingClients

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.3.3.1.3

Indicates the current number of roaming clients with at least one
active traffic stream (TS) for the specified access category
on this radio.

The value of this object is also included in the
wsManagedAPRa…

wsManagedAPRadioTspecMediumTimeAdmitted

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.3.3.1.4

Current sum of medium times allocated to clients with an active
traffic stream (TS) belonging to the specified access category on this
radio.

wsManagedAPRadioTspecMediumTimeUnallocated

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.3.3.1.5

Amount of configured medium time not currently allocated for the
specified access category on this radio that is available for
both non-roaming and roaming clients.

wsManagedAPRadioTspecMediumTimeRoamingUnallocated

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.3.3.1.6

Amount of configured medium time not currently allocated for the
specified access category on this radio that is available for
roaming clients only.

wsManagedAPMacAddress wsManagedAPRadioInterface wsManagedVAPId wsTspecACIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.3.3.1.7

wsManagedAPRadioTspecStatisticsTable

table

.1.3.6.1.4.1.207.8.42.8.34.17.3.4 · 1 row entry · 4 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsManagedAPRadioTspecStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsManagedAPRadioTspecStatisticsTable'

This table contains TSPEC statistics available per radio
interface for all APs managed by the controller.

wsManagedAPRadioTspecStatisticsEntry row .1.3.6.1.4.1.207.8.42.8.34.17.3.4.1

Each entry in this table contains TSPEC statistics per radio
interface for a specific AP managed by the controller.

Indexes

No indexes recorded

Column	Syntax	OID
wsManagedAPRadioTspecPktsRecvd Total packets received on this radio for all traffic streams belonging to the specified access category.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.4.1.1`
wsManagedAPRadioTspecPktsTransmitted Total packets transmitted on this radio for all traffic streams belonging to the specified access category.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.4.1.2`
wsManagedAPRadioTspecBytesRecvd Total bytes received on this radio for all traffic streams belonging to the specified access category.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.4.1.3`
wsManagedAPRadioTspecBytesTransmitted Total bytes transmitted on this radio for all traffic streams belonging to the specified access category.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.4.1.4`

wsManagedAPVAPTspecStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.17.3.5 · 1 row entry · 7 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsManagedAPVAPTspecStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsManagedAPVAPTspecStatusTable'

This table contains TSPEC status parameters for each VAP
on the specified radio interface for all APs managed
by the controller.

wsManagedAPVAPTspecStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.17.3.5.1

Each entry in this table contains TSPEC status parameters for each VAP
on the specified radio interface for a specific AP managed by the controller.

Indexes

Column Syntax OID

wsManagedAPVAPTspecOperStatus

Indicates the current operational status for the specified
access category on this VAP. If enabled(1),
this access category operates in accordance with admission
control mandatory (ACM) procedures.

Enumeration

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.207.8.42.8.34.17.3.5.1.1

wsManagedAPVAPTspecNumActiveTrafficStreams

Indicates the current number of active traffic streams (TSs)
for the specified access category on this VAP.

wsManagedAPVAPTspecNumTrafficStreamClients

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.3.5.1.2

Indicates the current number of clients with at least one
active traffic stream (TS) for the specified access category
on this VAP.

wsManagedAPVAPTspecNumTrafficStreamRoamingClients

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.3.5.1.3

Indicates the current number of roaming clients with at least one
active traffic stream (TS) for the specified access category
on this VAP.

The value of this object is also included in the
wsManagedAPVAPT…

wsManagedAPVAPTspecMediumTimeAdmitted

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.3.5.1.4

Current sum of medium times allocated to clients with an active
traffic stream (TS) belonging to the specified access category on this
VAP.

wsManagedAPVAPTspecMediumTimeUnallocated

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.3.5.1.5

Amount of configured medium time not currently allocated for the
specified access category on this VAP that is available for
both non-roaming and roaming clients.

wsManagedAPVAPTspecMediumTimeRoamingUnallocated

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.3.5.1.6

Amount of configured medium time not currently allocated for the
specified access category on this VAP that is available for
roaming clients only.

wsAssociatedClientMacAddress wsAssociatedClientTsTid

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.3.5.1.7

wsManagedAPVAPTspecStatisticsTable

table

.1.3.6.1.4.1.207.8.42.8.34.17.3.6 · 1 row entry · 4 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsManagedAPVAPTspecStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsManagedAPVAPTspecStatisticsTable'

This table contains TSPEC statistics available for each VAP
on the specified radio interface for all APs managed
by the controller.

wsManagedAPVAPTspecStatisticsEntry row .1.3.6.1.4.1.207.8.42.8.34.17.3.6.1

Each entry in this table contains TSPEC statistics for each VAP
on the specified radio for a specific AP managed by the controller.

Indexes

No indexes recorded

Column	Syntax	OID
wsManagedAPVAPTspecPktsRecvd Total packets received on this VAP for all traffic streams belonging to the specified access category.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.6.1.1`
wsManagedAPVAPTspecPktsTransmitted Total packets transmitted on this VAP for all traffic streams belonging to the specified access category.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.6.1.2`
wsManagedAPVAPTspecBytesRecvd Total bytes received on this VAP for all traffic streams belonging to the specified access category.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.6.1.3`
wsManagedAPVAPTspecBytesTransmitted Total bytes transmitted on this VAP for all traffic streams belonging to the specified access category.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.3.6.1.4`

wsAssociatedClientTsStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.17.4.1 · 1 row entry · 7 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAssociatedClientTsStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAssociatedClientTsStatusTable'

This table contains TSPEC traffic stream status parameters
for clients currently associated with managed APs.  Only
clients possessing one or more active traffic streams
appear in this table.

wsAssociatedClientTsStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.17.4.1.1

Each entry in this table contains TSPEC traffic stream status
parameters for a specific client that is currently associated
with the WS managed AP.

Indexes

Column Syntax OID

wsAssociatedClientTsTid

The traffic stream identifier (TID) indicated in the TSPEC that
defines the traffic stream for the specified access category
for the wireless client. Each traffic stream for a particular
client must have a unique TID i…

Unsigned32

Constraints:
range: 0-7

.1.3.6.1.4.1.207.8.42.8.34.17.4.1.1.1

wsAssociatedClientTsAccessCategory

Access category (AC) of this client traffic stream.
Only those ACs that support mandatory admission control
are used. The currently supported AC values are:
0 - Voice
1 - Video

TspecSuppAC

Type Values:

0	voice
1	video

.1.3.6.1.4.1.207.8.42.8.34.17.4.1.1.2

wsAssociatedClientTsDirection

The direction of the client traffic stream (TS) as indicated
in the TSPEC. An uplink(1) TS monitors data traffic flowing
from client station to AP, while a downlink(2) TS pertains to
the opposite direction. A bidirect…

Enumeration

Enumerated Values:

1	uplink
2	downlink
3	bidirectional

.1.3.6.1.4.1.207.8.42.8.34.17.4.1.1.3

wsAssociatedClientTsUserPriority

The user priority indicated in the TSPEC that defines
the traffic stream for the specified access category
for the wireless client. QoS Data frames to/from the client
containing this user priority are categorized as be…

wsAssociatedClientTsMediumTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.4.1.1.4

Indicates the amount of time this client is allowed to access
the wireless medium each second for the specified access category through
this traffic stream. This value is calculated by the AP based
on various parameter…

wsAssociatedClientTsExcessUsageEvents

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.4.1.1.5

The number of times the wireless client has appreciably exceeded
the medium time established for its TSPEC. The actual measure
of 'appreciably exceeded' is implementation-dependent, but it is
not necessarily a single o…

wsAssociatedClientTsRoamingClientIndicator

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.17.4.1.1.6

A flag indicating whether this traffic stream was established
by a wireless client that was considered to be a roaming client.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.207.8.42.8.34.17.4.1.1.7

wsAssociatedClientTsStatisticsTable

table

.1.3.6.1.4.1.207.8.42.8.34.17.4.2 · 1 row entry · 4 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAssociatedClientTsStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAssociatedClientTsStatisticsTable'

This table contains TSPEC traffic stream statistics
for clients currently associated with managed APs.  Only
clients possessing one or more active traffic streams
appear in this table.

wsAssociatedClientTsStatisticsEntry row .1.3.6.1.4.1.207.8.42.8.34.17.4.2.1

Each entry in this table contains TSPEC traffic stream statistics
for a specific client that is currently associated with the
WS managed AP.

Indexes

No indexes recorded

Column	Syntax	OID
wsAssociatedClientTsPktsRecvd Total packets received from the client station for the traffic stream belonging to the specified access category. This object is only valid when the wsAssociatedClientTsDirection is either uplink(1) or bi…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.4.2.1.1`
wsAssociatedClientTsPktsTransmitted Total packets transmitted to the client station for the traffic stream belonging to the specified access category. This object is only valid when the wsAssociatedClientTsDirection is either downlink(2) or…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.4.2.1.2`
wsAssociatedClientTsBytesRecvd Total bytes received from the client station for the traffic stream belonging to the specified access category. This object is only valid when the wsAssociatedClientTsDirection is either uplink(1) or bidi…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.4.2.1.3`
wsAssociatedClientTsBytesTransmitted Total bytes transmitted to the client station for the traffic stream belonging to the specified access category. This object is only valid when the wsAssociatedClientTsDirection is either downlink(2) or b…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.17.4.2.1.4`

wsAPProvisioningTable

table

.1.3.6.1.4.1.207.8.42.8.34.18.1 · 1 row entry · 14 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAPProvisioningTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAPProvisioningTable'

This table contains data for provisioning access points and also the
AP provisioning status information.

wsAPProvisioningEntry row .1.3.6.1.4.1.207.8.42.8.34.18.1.1

Each entry has parameters that indicate AP provisioned values and
also parameters to configure new provisioning information.

Indexes

wsAPProvMacAddress

Column Syntax OID

wsAPProvMacAddress

MAC address of an AP.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.18.1.1.1

wsAPProvIPAddress

Network IP address of the AP.

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.18.1.1.2

wsAPProvPrimarySwitchIP

Provisioned primary controller IP address on the AP.

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.18.1.1.3

wsAPProvBackupSwitchIP

Provisioned backup controller IP address on the AP.

wsAPProvUnmanagedAPReprovMode

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.18.1.1.4

wsAPProvMutualAuthMode

The mutual authentication mode configured in the AP.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.18.1.1.5

The configured AP re-provisioning mode when in unmanaged state in
the AP.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.18.1.1.6

wsAPProvAge

Time since any information has been received from this AP.

wsAPProvNewPrimarySwitchIP

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.18.1.1.7

The IP address of the primary controller which the adminstrator wants to
provision the AP.

wsAPProvNewBackupSwitchIP

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.18.1.1.8

The IP address of the backup controller which the administrator wants to
provision the AP.

wsAPProvCertProfileTxStatus

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.18.1.1.9

wsAPProvNewProfileId

Profile ID to be configured in the local Valid AP database of the
primary and backup controllers.

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.207.8.42.8.34.18.1.1.10

wsAPProvCommand

This parameter triggers the AP provisioning process for this AP.

Enumeration

Enumerated Values:

0	none
1	initiate

.1.3.6.1.4.1.207.8.42.8.34.18.1.1.11

wsAPProvStatus

Status of the most recently issued AP provisioning command.

Enumeration

Enumerated Values:

1	not-started
2	requested
3	success
4	in-progress
5	provisioning-rejected
6	timed-out

.1.3.6.1.4.1.207.8.42.8.34.18.1.1.12

Status of the last AP profile and X.509 certificate distribution to
primary and backup controllers.

Enumeration

Enumerated Values:

1	not-started
2	success
3	failed

.1.3.6.1.4.1.207.8.42.8.34.18.1.1.13

wsAPProvEntryPurge

This is an action object. Setting this object to enable will delete
the AP entry if it is unmanaged. Reads on this object will always return
disabled.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.18.1.1.14

wsWDSAPGroupTable

table

.1.3.6.1.4.1.207.8.42.8.34.19.1 · 1 row entry · 5 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsWDSAPGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsWDSAPGroupTable'

The following

wsWDSAPGroupEntry row .1.3.6.1.4.1.207.8.42.8.34.19.1.1

Each entry

Indexes

wsWDSAPGroupId

Column Syntax OID

wsWDSAPGroupId

Unique WDS Group Id for each entry.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.19.1.1.1

wsWDSAPGroupName

AP configuration profile name.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.19.1.1.2

wsWDSAPGroupSpanningTree

This varible allows the spanning tree mode enabling or disabling in a Managed AP Group.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.19.1.1.3

wsWDSAPGroupPassword

Indicates password to be used to form WDS links among
the APs in a Managed AP Group. If password is
configured, read on this object will return '*****'.

OctetString

Constraints:
range: 8-63

.1.3.6.1.4.1.207.8.42.8.34.19.1.1.4

wsWDSAPGroupRowStatus

This variable is used to create or delete entries in the table.

wsWDSAPGroupId wsWDSAPGroupAPMacAddress

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.207.8.42.8.34.19.1.1.5

wsWDSAPGroupAPTable

table

.1.3.6.1.4.1.207.8.42.8.34.19.2 · 1 row entry · 3 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsWDSAPGroupAPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsWDSAPGroupAPTable'

List of the AP MAC addresses in the AP Group

wsWDSAPGroupAPEntry row .1.3.6.1.4.1.207.8.42.8.34.19.2.1

Per Group Group Id and MAC address of the AP.

Indexes

Column Syntax OID

wsWDSAPGroupAPMacAddress

AP MAC address in the WDS AP Group

wsWDSAPGroupAPStpPriority

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.19.2.1.1

AP's STP priority in the WDS AP Group

Integer32

Constraints:
range: 0-61440

.1.3.6.1.4.1.207.8.42.8.34.19.2.1.2

wsWDSAPGroupAPEntryRowStatus

This variable is used to create or delete entries in the table.

wsWDSAPGroupId wsWDSAPLinkSourceMacAddr wsWDSAPLinkSourceRadio wsWDSAPLinkDestMacAddr wsWDSAPLinkDestRadio

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.207.8.42.8.34.19.2.1.3

wsWDSAPLinkTable

table

.1.3.6.1.4.1.207.8.42.8.34.19.3 · 1 row entry · 6 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsWDSAPLinkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsWDSAPLinkTable'

This table contains the WDS AP Links created on the
controller.

wsWDSAPLinkEntry row .1.3.6.1.4.1.207.8.42.8.34.19.3.1

Each entry in this table contains parameters for the WDS link
of WDS AP Group in the Wireless network.

Indexes

Column Syntax OID

wsWDSAPLinkSourceMacAddr

MAC Address of one End-Point of WDS link.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.19.3.1.1

wsWDSAPLinkSourceRadio

Radio Number of the WDS Link End-Point on the Source AP.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.19.3.1.2

wsWDSAPLinkDestMacAddr

MAC Address of another End-Point of WDS link.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.19.3.1.3

wsWDSAPLinkDestRadio

Radio Number of the WDS Link End-Point on the Destination AP.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.19.3.1.4

wsWDSAPLinkPathCost

Spanning Tree path cost for the WDS AP Link.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.207.8.42.8.34.19.3.1.5

wsWDSAPLinkRowStatus

This variable is used to create or delete entries in the table.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.207.8.42.8.34.19.3.1.6

wsWDSAPGroupStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.19.4 · 1 row entry · 12 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsWDSAPGroupStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsWDSAPGroupStatusTable'

This table contains status parameters for the WDS APs created on the
controller.

wsWDSAPGroupStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.19.4.1

Each entry in this table contains status parameters for the WDS Group
configured in WDS group database.

Indexes

wsWDSAPGroupId

Column Syntax OID

wsWDSConfigAPCount

Number of APs configured by the Administrator in this WDS AP Group.

Integer32

Constraints:
range: 0-4

.1.3.6.1.4.1.207.8.42.8.34.19.4.1.1

wsWDSConnectedAPCount

Number of APs managed by the controller that are members of this WDS AP Group.

Integer32

Constraints:
range: 0-4

.1.3.6.1.4.1.207.8.42.8.34.19.4.1.2

wsWDSRootAPCount

Number of Root APs managed by the controller that are members of this WDS AP Group.

Integer32

Constraints:
range: 0-4

.1.3.6.1.4.1.207.8.42.8.34.19.4.1.3

wsWDSSatelliteAPCount

Number of Satellite APs managed by the controller that are members of this WDS AP Group.

Integer32

Constraints:
range: 0-4

.1.3.6.1.4.1.207.8.42.8.34.19.4.1.4

wsWDSAPRootBridge

MAC Address of the device elected as the Spanning Tree Root Bridge.

wsWDSDetectedWDSLinkCount

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.19.4.1.5

wsWDSAPRootDeviceType

The type of device elected as the Spanning Tree Root bridge.

Enumeration

Enumerated Values:

0	none
1	root-ap
2	satellite-ap
3	external-device

.1.3.6.1.4.1.207.8.42.8.34.19.4.1.6

wsWDSConfigWDSLinkCount

Number of configured bidirectional links in the WDS AP Group.

Integer32

Constraints:
range: 0-6

.1.3.6.1.4.1.207.8.42.8.34.19.4.1.7

Number of WDS links detected in the system.

Integer32

Constraints:
range: 0-6

.1.3.6.1.4.1.207.8.42.8.34.19.4.1.8

wsWDSBlockedWDSLinkCount

Number of WDS links blocked by the spanning tree protocol.

Integer32

Constraints:
range: 0-6

.1.3.6.1.4.1.207.8.42.8.34.19.4.1.9

wsWDSGroupNewPassword

This Password is sent to all controllers and APs when the Change-Password
command is initiadted by the administrator for this WDS Group.
When passwod is configured this object will always
return '*****'.

OctetString

Constraints:
range: 8-63

.1.3.6.1.4.1.207.8.42.8.34.19.4.1.10

wsWDSGroupChangePasswdStart

This action object is used to:
- start - Start the WDS Group password change for the peer controllers and the
managed APs.
- Read on this object will always return none.

Enumeration

Enumerated Values:

1	none
2	start

.1.3.6.1.4.1.207.8.42.8.34.19.4.1.11

wsWDSGroupChangePasswdStatus

Status of the last invocation of the password change protocol.

Enumeration

Enumerated Values:

1	not-started
2	requested
3	success
4	invalid-password
5	in-progress
6	timed-out
7	failed

.1.3.6.1.4.1.207.8.42.8.34.19.4.1.12

wsWDSAPStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.19.5 · 1 row entry · 8 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsWDSAPStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsWDSAPStatusTable'

This table contains status parameters for the WDS APs created on the
controller.

wsWDSAPStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.19.5.1

Each entry in this table contains status parameters for the WDS AP
configured in WDS group database.

Indexes

wsWDSAPGroupId wsWDSAPMacAddr

Column Syntax OID

wsWDSAPMacAddr

MAC Address of the WDS AP.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.19.5.1.1

wsWDSAPConnectionStatus

Flag indicating whether the AP is currently being managed by one of the
Wireless controllers in the cluster.

Enumeration

Enumerated Values:

0	not-connected
1	connected

.1.3.6.1.4.1.207.8.42.8.34.19.5.1.2

wsWDSAPSatelliteMode

Flag indicating whether the AP is a Satellite AP connected via WDS link or a Root AP connected via the wire to the campus network.

Enumeration

Enumerated Values:

0	none
1	wired
2	satellite

.1.3.6.1.4.1.207.8.42.8.34.19.5.1.3

wsWDSAPSTPRootMode

Flag indicating whether the AP is the root of the spanning tree.

Enumeration

Enumerated Values:

0	not-stp-root
1	stp-root

.1.3.6.1.4.1.207.8.42.8.34.19.5.1.4

wsWDSAPSTPCost

Spanning Tree Path Cost to the root.

wsWDSAPGroupId wsWDSSourceMacAddr wsWDSSourceRadio wsWDSDestMacAddr wsWDSDestRadio

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.19.5.1.5

wsWDSAPEthPortSTPStatus

Spanning Tree Status of the Ethernet Port.

Enumeration

Enumerated Values:

0	disabled
1	forwarding
2	learning
3	listening
4	blocking

.1.3.6.1.4.1.207.8.42.8.34.19.5.1.6

wsWDSAPEthPortMode

Ethernet Port Mode.

Enumeration

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.207.8.42.8.34.19.5.1.7

wsWDSAPEthPortLinkState

Link State of Ethernet Port.

Enumeration

Enumerated Values:

0	down
1	up

.1.3.6.1.4.1.207.8.42.8.34.19.5.1.8

wsWDSLinkStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.19.6 · 1 row entry · 9 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsWDSLinkStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsWDSLinkStatusTable'

This table contains status parameters for the WDS Links created on the
controller.

wsWDSLinkStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.19.6.1

Each entry in this table contains status parameters for the WDS link
created on the Wireless network.

Indexes

Column Syntax OID

wsWDSSourceMacAddr

MAC Address of one End-Point of WDS link.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.19.6.1.1

wsWDSSourceRadio

Radio Number of the WDS Link End-Point on the Source AP.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.19.6.1.2

wsWDSDestMacAddr

MAC Address of another End-Point of WDS link.

wsWDSLinkSourceEndPointDetected

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.19.6.1.3

wsWDSDestRadio

Radio Number of the WDS Link End-Point on the Destination AP.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.19.6.1.4

Flag indicating whether AP specified by the Destination MAC detected
the AP specified by the source MAC.

Enumeration

Enumerated Values:

0	not-detected
1	detected

.1.3.6.1.4.1.207.8.42.8.34.19.6.1.5

wsWDSLinkDestEndPointDetected

Flag indicating whether AP specified by the Source MAC detected the AP
specified by the Destination MAC.

Enumeration

Enumerated Values:

0	not-detected
1	detected

.1.3.6.1.4.1.207.8.42.8.34.19.6.1.6

wsWDSLinkSourceSTPState

Spanning Tree State of the link on the source AP.

Enumeration

Enumerated Values:

0	disabled
1	forwarding
2	learning
3	listening
4	blocking

.1.3.6.1.4.1.207.8.42.8.34.19.6.1.7

wsWDSLinkDestSTPState

Spanning Tree State of the link on the destination AP.

Enumeration

Enumerated Values:

0	disabled
1	forwarding
2	learning
3	listening
4	blocking

.1.3.6.1.4.1.207.8.42.8.34.19.6.1.8

wsWDSLinkAggregationMode

When parallel links are defined between two APs, this parameter
indicates whether this link is part of the aggregation link pair.

Enumeration

Enumerated Values:

0	not-aggregated
1	aggregated

.1.3.6.1.4.1.207.8.42.8.34.19.6.1.9

wsWDSLinkStatisticsTable

table

.1.3.6.1.4.1.207.8.42.8.34.19.7 · 1 row entry · 8 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsWDSLinkStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsWDSLinkStatisticsTable'

This table contains statistics available for each AP
managed by the controller.

wsWDSLinkStatisticsEntry row .1.3.6.1.4.1.207.8.42.8.34.19.7.1

Each entry in this table contain statistics available for each AP
managed by the controller.

Indexes

No indexes recorded

Column	Syntax	OID
wsWDSLinkSourceAPPktsSent Total number of packets transmitted by the Source AP on the WDS link.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.19.7.1.1`
wsWDSLinkSourceAPBytesSent Total number of bytes transmitted by the source AP on the link.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.19.7.1.2`
wsWDSLinkSourceAPPktsRcvd Total number of packets received by the Source AP on the WDS link.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.19.7.1.3`
wsWDSLinkSourceAPBytesRcvd Total number of bytes received by the Source AP on the WDS link.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.19.7.1.4`
wsWDSLinkDestAPPktsSent Total number of packets transmitted by the Destination AP on the WDS link.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.19.7.1.5`
wsWDSLinkDestAPBytesSent Total number of bytes transmitted by the Destination AP on the WDS link.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.19.7.1.6`
wsWDSLinkDestAPPktsRcvd Total number of packets received by the Destination AP on the WDS link.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.19.7.1.7`
wsWDSLinkDestAPBytesRcvd Total Number of bytes received by the Destination AP on the WDS link.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.19.7.1.8`

wsDevLocBldngTable

table

.1.3.6.1.4.1.207.8.42.8.34.20.1 · 1 row entry · 5 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsDevLocBldngTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsDevLocBldngTable'

This table contains data for configuration parameters for device location.

wsDevLocBldngEntry row .1.3.6.1.4.1.207.8.42.8.34.20.1.1

Each entry in this table contains building parameters.

Indexes

wsDevLocBldngNum

Column Syntax OID

wsDevLocBldngNum

Indicates building number for a particular building.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.207.8.42.8.34.20.1.1.1

wsDevLocBldngDesc

The building description for a particular building.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.207.8.42.8.34.20.1.1.2

wsDevLocFlrCount

Indicates floor count for a particular building.

Integer32

Constraints:
range: 0-20

.1.3.6.1.4.1.207.8.42.8.34.20.1.1.3

wsDevLocApCount

Indicates AP count for a particular building.

Integer32

Constraints:
range: 0-192

.1.3.6.1.4.1.207.8.42.8.34.20.1.1.4

wsDevLocBldngRowStatus

This variable is used to create and delete entries
in the table.

wsDevLocBldngNum wsDevLocBldngFlrNum

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.207.8.42.8.34.20.1.1.5

wsDevLocBldngFlrTable

table

.1.3.6.1.4.1.207.8.42.8.34.20.2 · 1 row entry · 4 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsDevLocBldngFlrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsDevLocBldngFlrTable'

This table contains data for configuration parameters for device location
building and floor.

wsDevLocBldngFlrEntry row .1.3.6.1.4.1.207.8.42.8.34.20.2.1

Each entry in this table contains building floor parameters.

Indexes

Column Syntax OID

wsDevLocBldngFlrNum

Indicates floor number for a particular building.

Integer32

Constraints:
range: 1-20

.1.3.6.1.4.1.207.8.42.8.34.20.2.1.1

wsDevLocBldngFlrDesc

The floor description for a particular floor.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.207.8.42.8.34.20.2.1.2

wsDevLocBldngFlrApCount

Indicates AP count for a particular building-floor.

Integer32

Constraints:
range: 0-192

.1.3.6.1.4.1.207.8.42.8.34.20.2.1.3

wsDevLocFlrRowStatus

This variable is used to create and delete entries
in the table.

wsDevLocBldngNum wsDevLocBldngFlrNum wsDevLocManagedApMac

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.207.8.42.8.34.20.2.1.4

wsDevLocManagedApTable

table

.1.3.6.1.4.1.207.8.42.8.34.20.3 · 1 row entry · 5 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsDevLocManagedApTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsDevLocManagedApTable'

This table contains data for configuration parameters for device location
building, floor and AP.

wsDevLocManagedApEntry row .1.3.6.1.4.1.207.8.42.8.34.20.3.1

Each entry in this table contains building floor parameters.

Indexes

Column Syntax OID

wsDevLocManagedApMac

The MAC address of the AP.

wsDevLocManagedApRowStatus

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.20.3.1.1

wsDevLocMeasurementUnit

Measurement Units in Meters/Feet.

Enumeration

Enumerated Values:

1	meters
2	feet

.1.3.6.1.4.1.207.8.42.8.34.20.3.1.2

wsDevLocManagedApXCoord

This indicates the X-coordinate of the AP.

Integer32

Constraints:
range: -3000-3000

.1.3.6.1.4.1.207.8.42.8.34.20.3.1.3

wsDevLocManagedApYCoord

This indicates the Y-coordinate of the AP.

Integer32

Constraints:
range: -3000-3000

.1.3.6.1.4.1.207.8.42.8.34.20.3.1.4

This variable is used to create and delete entries
in the table. AP entry should be created with Measurement
Unit and XY-Coordinates.

wsOnDemandTriggerFloorStatusBuildingNum wsOnDemandTriggerFloorStatusFloorNum

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.207.8.42.8.34.20.3.1.5

wsOnDemandTriggerFloorStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.20.6.1 · 1 row entry · 9 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsOnDemandTriggerFloorStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsOnDemandTriggerFloorStatusTable'

This table contains the location record for each building floor.

wsOnDemandTriggerFloorStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.20.6.1.1

Location record. Each entry contains location status of the
target device with respect to building anf floor numbers.

Indexes

Column Syntax OID

wsOnDemandTriggerFloorStatusBuildingNum

Building number.

wsOnDemandTriggerFloorStatusFloorNum

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1.1

Floor number

wsOnDemandTriggerFloorStatusDeviceFound

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1.2

Flag indicating whether the device is found on this floor.

Enumeration

Enumerated Values:

1	notFound
2	found

.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1.3

wsOnDemandTriggerFloorStatusNumOfAPs

Number of APs located on this floor that detected the
device.

wsOnDemandTriggerFloorStatusSolutionType

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1.4

Flag indicating whether the probability map is
a circle around the managed AP, or the solution is an X,Y
coordinate.

Enumeration

Enumerated Values:

1	noSolution
2	circle
3	point

.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1.5

wsOnDemandTriggerFloorStatusXCoordinate

X-axis offset. The parameter is applicable to the Circle
and Point solution.

wsOnDemandTriggerFloorStatusYCoordinate

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1.6

Y-axis offset. The parameter is applicable to the Circle
and Point solution.

wsOnDemandTriggerFloorStatusCircleRadius

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1.7

For the Circle solution this parameter represents the radius
from the X,Y coordinate where the device is most likely to be
located. For the Point solution this value is not applicable
and is set to 0.

wsOnDemandTriggerFloorStatusSigma

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1.8

The standard deviation for the location. The parameter is
applicable to Circle and Point solutions. For the Circle
solution the Sigma represents the offset from Circle Radius.
For the Point solution the sigma represents…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1.9

wsTriangulationLocStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.20.7 · 1 row entry · 9 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsTriangulationLocStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsTriangulationLocStatusTable'

This table contains data for triangulation location and
status information.

wsTriangulationLocStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.20.7.1

Each entry has parameters that indicate triangulation location
status values.

Indexes

wsTriangLocMacAddress

Column Syntax OID

wsTriangLocMacAddress

MAC address of an AP or Client.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.20.7.1.1

wsTriangLocDataType

This parameter indicates whether the location data
is present for this device.

Enumeration

Enumerated Values:

0	not-present
1	present

.1.3.6.1.4.1.207.8.42.8.34.20.7.1.2

wsTriangLocStatus

The status of the last iteration of the location computation algorithm.

Enumeration

Enumerated Values:

1	not-executed
2	success
3	failure

.1.3.6.1.4.1.207.8.42.8.34.20.7.1.3

wsTriangLocDeviceType

This parameter indicates device type whether AP or Client.

Enumeration

Enumerated Values:

1	ap
2	client

.1.3.6.1.4.1.207.8.42.8.34.20.7.1.4

wsTriangLocAge

Time since the last successful location computation.

wsAuthenticatedClientMacAddress

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.20.7.1.5

wsTriangLocBldng

Indicates building number in which device is detected.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.207.8.42.8.34.20.7.1.6

wsTriangLocFlr

Indicates floor number in which device is detected.

Integer32

Constraints:
range: 1-20

.1.3.6.1.4.1.207.8.42.8.34.20.7.1.7

wsTriangLocXCoord

This indicates the X axis offset of the device from
some arbitrary 0,0 point on the building floor.

Integer32

Constraints:
range: -3000-3000

.1.3.6.1.4.1.207.8.42.8.34.20.7.1.8

wsTriangLocYCoord

This indicates the Y axis offset of the device from
some arbitrary 0,0 point on the building floor.

Integer32

Constraints:
range: -3000-3000

.1.3.6.1.4.1.207.8.42.8.34.20.7.1.9

wsAuthenticatedClientStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.21.1 · 1 row entry · 33 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAuthenticatedClientStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAuthenticatedClientStatusTable'

This table contains status parameters of clients that are
currently associated with managed APs.

wsAuthenticatedClientStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.21.1.1

Each entry in this table contain client status parameters
assocaited with the WS managed AP.

Indexes

Column Syntax OID

wsAuthenticatedClientMacAddress

Authenticated client MAC address.

wsAuthenticatedClientTunnelIpAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.1

Indicates network IP address of the client station, 0.0.0.0 indicates unknown.
Tunnel IP subnet is present only for clients authenticated with tunneled VAPs.

wsAuthenticatedClientUserName

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.2

Indicates user name of the client that have authenticated via
802.1x, clients on networks with other security modes will
not have a user name.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.3

wsAuthenticatedClientSSID

Indicates the network on which the client is connected.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.4

wsAuthenticatedClientVLAN

If client is on VAP using VLAN data forwarding mode,
indicates current assigned VLAN.

Integer32

Constraints:
range: 0-4094

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.5

wsAuthenticatedClientStatus

This object indicates client's status.

Enumeration

Enumerated Values:

1	authenticated
2	associated
3	disassociated

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.6

wsAuthenticatedClientTxDataRate

Integer32

Constraints:
range: 2-1200

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.7

wsAuthenticatedClientInactivePeriod

For a current association, period of time that
the AP has not seen any traffic for the client.

wsAuthenticatedClientDisassociateAction

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.8

This is an action object. Setting this object to start
will initiate the disassociation of associated client.
Read on this object will always return none.

Enumeration

Enumerated Values:

1	none
2	start

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.9

wsAuthenticatedClientAge

Indicates time since the controller has received new data for
this client.

wsAuthenticatedClientAssociatingSwitch

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.10

This object indicates whether the client is associated
to an AP managed by this controller or peer-controller.

Enumeration

Enumerated Values:

1	local-switch
2	peer-switch

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.11

wsAuthenticatedClientSwitchMacAddress

MAC address of the WS associating the client.

wsAuthenticatedClientSwitchIpAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.12

IP address of the WS associating the client.

wsAuthenticatedClientDot11nCapable

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.13

Flag indicating whether this client is capable of 802.11n operation.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.14

wsAuthenticatedClientStbcCapable

Flag indicating whether this client is capable of Space Time Block Code (STBC) operation.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.15

wsAuthenticatedClientDistTunnelStatus

Indicates whether L2 Distributed Tunneling is Enabled or Disabled

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.16

wsAuthenticatedClientDistTunnelRoamStatus

Indicates whether the client is using the distrubuted tunnel or not.
Also indicates if it is a roamed client or not.

Enumeration

Enumerated Values:

0	associated
1	home

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.17

wsAuthenticatedClientDistTunnelHomeAPMac

Indicates MAC Address of the client's Home AP. Here the client should be
associated with the network on which the L2 Distributed Tunneling is enabled.

wsAuthenticatedClientDistTunnelAssocAPMac

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.18

MAC Address of the client's Association AP to which the client has roamed to.

wsAuthenticatedClientAPMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.19

MAC Address of the AP to which client is Authenticated.

wsAuthenticatedClientBSSID

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.20

BSSID of the VAP to which client is associated.

wsAuthenticatedClientRadioInterface

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.21

Indicates the radio interface on which client is associated.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.22

wsAuthenticatedClientChannel

Indicates channel for associated client entry.

Integer32

Constraints:
range: 1-165

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.23

wsAuthenticatedClientNwTime

Indicates time since this client first authenticated with
the network.

wsAuthenticatedClientIpAddress

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.24

Indicates network IPv4 address of the client station detetecd through ARP snooping, 0.0.0.0 indicates unknown.

wsAuthenticatedClientNetBiosName

Type Constraints:
range: 4

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.25

NetBios Name of the client.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.26

wsAuthenticatedClientRRMSupported

Enumeration

Enumerated Values:

1	enabled
2	supported
3	unsupported

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.27

wsAuthenticatedClientRRMLocationReportSupported

Indicates if the client can support RRM location report requests.

Enumeration

Enumerated Values:

1	supported
2	unsupported

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.28

wsAuthenticatedClientRRMBeaconTableMeasurementSupported

Indicates if the client can detect APs via RRM beacon table reports.

Enumeration

Enumerated Values:

1	supported
2	unsupported

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.29

wsAuthenticatedClientRRMBeaconActiveMeasurementSupported

Indicates if the client supports active scan capability.

Enumeration

Enumerated Values:

1	supported
2	unsupported

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.30

wsAuthenticatedClientRRMBeaconPassiveMeasurementSupported

Indicates if the client supports passive scan capability.

Enumeration

Enumerated Values:

1	supported
2	unsupported

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.31

wsAuthenticatedClientRRMChannelLoadMeasurementSupported

Indicates if the client supports RRM channel load measurement.

Enumeration

Enumerated Values:

1	supported
2	unsupported

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.32

wsAuthenticatedClientDot11acCapable

Flag indicating whether this client is capable of 802.11ac operation.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.207.8.42.8.34.21.1.1.33

wsAuthenticatedClientStatisticsTable

table

.1.3.6.1.4.1.207.8.42.8.34.21.2 · 1 row entry · 15 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAuthenticatedClientStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAuthenticatedClientStatisticsTable'

This table contains statistics available for each client
associated to a WS managed AP.

wsAuthenticatedClientStatisticsEntry row .1.3.6.1.4.1.207.8.42.8.34.21.2.1

Each entry in this table contain statistics available for each
client associated a WS managed AP.

Indexes

No indexes recorded

Column	Syntax	OID
wsAuthenticatedClientPktsRecvd Total packets received by a managed AP from the client station.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.21.2.1.1`
wsAuthenticatedClientBytesRecvd Total bytes received by a managed AP from the client station.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.21.2.1.2`
wsAuthenticatedClientPktsTransmitted Total packets transmitted by a managed AP to the client station.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.21.2.1.3`
wsAuthenticatedClientBytesTransmitted Total bytes transmitted by a managed AP to the client station.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.21.2.1.4`
wsAuthenticatedClientDuplicatePktsRecvd Total duplicate packets received from the client station.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.21.2.1.5`
wsAuthenticatedClientFragmentedPktsRecvd Total fragmented packets received from the client station.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.21.2.1.6`
wsAuthenticatedClientFragmentedPktsTransmitted Total fragmented packets transmitted to the client station.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.21.2.1.7`
wsAuthenticatedClientTransmitRetryCount Indicates number of times transmits to client station succeeded after one or more retries.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.21.2.1.8`
wsAuthenticatedClientTransmitRetryFailedCount Number of times transmits to client station failed after one or more retries.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.21.2.1.9`
wsAuthenticatedClientPktsRecvDropped Total packets dropped in the receive direction by a managed AP from the client station. This is due to client QoS actions affecting the wireless up (inbound) direction from client to AP.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.21.2.1.10`
wsAuthenticatedClientBytesRecvDropped Total bytes dropped in the receive direction by a managed AP from the client station. This is due to client QoS actions affecting the wireless up (inbound) direction from client to AP.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.21.2.1.11`
wsAuthenticatedClientPktsTransmitDropped Total packets dropped in the transmit direction by a managed AP to the client station. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.21.2.1.12`
wsAuthenticatedClientBytesTransmitDropped Total bytes dropped in the transmit direction by a managed AP to the client station. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.21.2.1.13`
wsAuthenticatedClientTsViolatePktsRecvd Number of packets received by the AP from a client station that are in excess of the client's alotted traffic stream (TS) uplink bandwidth, or are for an access category requiring admission control to which the client s…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.21.2.1.14`
wsAuthenticatedClientTsViolatePktsTransmitted Number of packets transmitted by the AP to a client station that are in excess of the client's alotted traffic stream (TS) downlink bandwidth, or are for an access category requiring admission control to which the clien…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.21.2.1.15`

wsAuthenticatedClientNeighborManagedAPStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.21.3 · 1 row entry · 4 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAuthenticatedClientNeighborManagedAPStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAuthenticatedClientNeighborManagedAPStatusTable'

This table is maintained to lookup all WS managed APs
detected, client can see in its RF area.

wsAuthenticatedClientNeighborManagedAPStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.21.3.1

Each entry in this table contain WS managed APs that can
be seen by client in its RF area.

Indexes

wsAuthenticatedClientStationMacAddress wsAuthenticatedClientNeighborWSManagedAPMacAddress wsAuthenticatedClientNeighborWSManagedAPRadioInterface

Column Syntax OID

wsAuthenticatedClientStationMacAddress

The Ethernet address of a client station.

wsAuthenticatedClientNeighborWSManagedAPMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.21.3.1.1

The Ethernet address of a WS managed AP.

wsAuthenticatedClientNeighborWSManagedAPRadioInterface

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.207.8.42.8.34.21.3.1.2

The radio interface of Managed AP.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.207.8.42.8.34.21.3.1.3

wsAuthenticatedClientStationDiscoveryReason

Indicates the client status with respect to the
Managed AP it is refering. One or more flags can
be enabled at the same time.

Bits

Enumerated Values:

0	none
1	rfscan-discovered
2	neighbor-ap-associated
3	current-ap-associated
4	probe-request-discovered
5	ad-hoc-rogue
6	associated-to-peer-ap

.1.3.6.1.4.1.207.8.42.8.34.21.3.1.4

wsVAPAuthenticatedClientStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.21.4 · 1 row entry · 2 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsVAPAuthenticatedClientStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsVAPAuthenticatedClientStatusTable'

This table is maintained to lookup clients associated
to a specific VAP on a WS managed AP.

wsVAPAuthenticatedClientStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.21.4.1

Each entry in this table contain clients associated
to each VAP.

Indexes

wsAuthenticatedVAPMacAddress wsVAPAuthenticatedClientMacAddress

Column	Syntax	OID
wsAuthenticatedVAPMacAddress The Ethernet address assigned to a VAP to which the client is associated.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.21.4.1.1`
wsVAPAuthenticatedClientMacAddress The Ethernet address of associated client station.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.21.4.1.2`

wsSSIDAuthenticatedClientStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.21.5 · 1 row entry · 2 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsSSIDAuthenticatedClientStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsSSIDAuthenticatedClientStatusTable'

This table is maintained to lookup all clients
associated to a particular network.

wsSSIDAuthenticatedClientStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.21.5.1

Each entry in this table contain clients
associated to a particular network.

Indexes

wsSSIDAuthenticatedClientMacAddress

Column	Syntax	OID
wsAuthenticatedSSID Indicates the network on which the client is connected.	OctetString Constraints: `range: 1-32`	`.1.3.6.1.4.1.207.8.42.8.34.21.5.1.1`
wsSSIDAuthenticatedClientMacAddress The Ethernet address of the client station.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.21.5.1.2`

wsSwitchAuthenticatedClientStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.21.6 · 1 row entry · 2 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsSwitchAuthenticatedClientStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsSwitchAuthenticatedClientStatusTable'

This table is maintained to lookup clients associated
to the APs managed by the specific controller.

wsSwitchAuthenticatedClientStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.21.6.1

Each entry in this table contain client associated
to each controller.

Indexes

wsSwitchIPAddress wsSwitchAuthenticatedClientMacAddress

Column	Syntax	OID
wsAuthenticatedClientSwitchIPAddress IP address of the WS associating the client.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.207.8.42.8.34.21.6.1.1`
wsSwitchAuthenticatedClientMacAddress Ethernet address of the associated client station.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.207.8.42.8.34.21.6.1.2`

wsAuthenticatedClientQosStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.21.7 · 1 row entry · 11 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAuthenticatedClientQosStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAuthenticatedClientQosStatusTable'

This table contains client QoS status parameters of clients that are
currently associated with managed APs. These objects represent the
actual operational status values in effect for the clients.

wsAuthenticatedClientQosStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.21.7.1

Each entry in this table contains client QoS status parameters
for a client associated with the WS managed AP.

Indexes

No indexes recorded

Column Syntax OID

wsAuthenticatedClientQosBandwidthLimitDown

wsAuthenticatedClientQosBandwidthLimitUp

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.21.7.1.1

wsAuthenticatedClientQosAccessControlDownType

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.21.7.1.2

Access list type used for the wireless down (outbound) direction from
the AP to this client. The wsAuthenticatedClientQosAccessControlDownName
object identifies the access list.

Enumeration

Enumerated Values:

1	none
2	ip
3	mac
4	ipv6

.1.3.6.1.4.1.207.8.42.8.34.21.7.1.3

wsAuthenticatedClientQosAccessControlDownName

Name of the access list in use in accordance with the
wsAuthenticatedClientQosAccessControlDownType as follows:

none(1) - This object is not displayed.

ip(2) - This specifies an IP access…

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.207.8.42.8.34.21.7.1.4

wsAuthenticatedClientQosAccessControlUpType

Access list type used for the wireless up (inbound) direction from
this client to the AP. The wsAuthenticatedClientQosAccessControlUpName
object identifies the access list.

Enumeration

Enumerated Values:

1	none
2	ip
3	mac
4	ipv6

.1.3.6.1.4.1.207.8.42.8.34.21.7.1.5

wsAuthenticatedClientQosAccessControlUpName

Name of the access list in use in accordance with the
wsAuthenticatedClientQosAccessControlUpType as follows:

none(1) - This object is not displayed.

ip(2) - This specifies an IP access l…

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.207.8.42.8.34.21.7.1.6

wsAuthenticatedClientQosDiffservPolicyDownType

DiffServ policy type used for the wireless down (outbound) direction from
the AP to this client. The wsAuthenticatedClientQosDiffservPolicyDownName
object identifies the DiffServ policy.

Enumeration

Enumerated Values:

1	none
2	in

.1.3.6.1.4.1.207.8.42.8.34.21.7.1.7

wsAuthenticatedClientQosDiffservPolicyDownName

Name of the DiffServ policy in use in accordance with the
wsAuthenticatedClientQosDiffservPolicyDownType as follows:

none(1) - This object is not displayed.

in(2) - This specifies a DiffS…

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.207.8.42.8.34.21.7.1.8

wsAuthenticatedClientQosDiffservPolicyUpType

DiffServ policy type used for the wireless up (inbound) direction from
this client to the AP. The wsAuthenticatedClientQosDiffservPolicyUpName
object identifies the DiffServ policy.

Enumeration

Enumerated Values:

1	none
2	in

.1.3.6.1.4.1.207.8.42.8.34.21.7.1.9

wsAuthenticatedClientQosDiffservPolicyUpName

Name of the DiffServ policy in use in accordance with the
wsAuthenticatedClientQosDiffservPolicyUpType as follows:

none(1) - This object is not displayed.

in(2) - This specifies a DiffSer…

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.207.8.42.8.34.21.7.1.10

wsAuthenticatedClientQosOperStatus

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.207.8.42.8.34.21.7.1.11

wsAuthenticatedClientSessionStatisticsTable

table

.1.3.6.1.4.1.207.8.42.8.34.21.8 · 1 row entry · 15 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAuthenticatedClientSessionStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAuthenticatedClientSessionStatisticsTable'

This table contains statistics available for each client
associated to a WS managed AP, but accumulated for the duration
of the entire WLAN session, inclusive of client roaming.

wsAuthenticatedClientSessionStatisticsEntry row .1.3.6.1.4.1.207.8.42.8.34.21.8.1

Each entry in this table contain statistics available for each
client associated a WS managed AP, but accumulated for the duration
of the entire WLAN session, inclusive of client roaming.

Indexes

No indexes recorded

Column	Syntax	OID
wsAuthenticatedClientSessionPktsRecvd Total packets received by managed APs from the client station throughout the duration of the current WLAN session.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.21.8.1.1`
wsAuthenticatedClientSessionBytesRecvd Total bytes received by managed APs from the client station throughout the duration of the current WLAN session.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.21.8.1.2`
wsAuthenticatedClientSessionPktsTransmitted Total packets transmitted by managed APs to the client station throughout the duration of the current WLAN session.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.21.8.1.3`
wsAuthenticatedClientSessionBytesTransmitted Total bytes transmitted by managed APs to the client station throughout the duration of the current WLAN session.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.21.8.1.4`
wsAuthenticatedClientSessionDuplicatePktsRecvd Total duplicate packets received from the client station throughout the duration of the current WLAN session.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.21.8.1.5`
wsAuthenticatedClientSessionFragmentedPktsRecvd Total fragmented packets received from the client station. throughout the duration of the current WLAN session.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.21.8.1.6`
wsAuthenticatedClientSessionFragmentedPktsTransmitted Total fragmented packets transmitted to the client station throughout the duration of the current WLAN session.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.21.8.1.7`
wsAuthenticatedClientSessionTransmitRetryCount Indicates number of times transmits to client station succeeded after one or more retries throughout the duration of the current WLAN session.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.21.8.1.8`
wsAuthenticatedClientSessionTransmitRetryFailedCount Number of times transmits to client station failed after one or more retries throughout the duration of the current WLAN session.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.21.8.1.9`
wsAuthenticatedClientSessionPktsRecvDropped Total packets dropped in the receive direction by managed APs from the client station throughout the duration of the current WLAN session. This is due to client QoS actions affecting the wireless up (inbound) direction…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.21.8.1.10`
wsAuthenticatedClientSessionBytesRecvDropped Total bytes dropped in the receive direction by managed APs from the client station throughout the duration of the current WLAN session. This is due to client QoS actions affecting the wireless up (inbound) direction f…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.21.8.1.11`
wsAuthenticatedClientSessionPktsTransmitDropped Total packets dropped in the transmit direction by managed APs to the client station throughout the duration of the current WLAN session. This is due to client QoS actions affecting the wireless down (outbound) directi…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.21.8.1.12`
wsAuthenticatedClientSessionBytesTransmitDropped Total bytes dropped in the transmit direction by managed APs to the client station throughout the duration of the current WLAN session. This is due to client QoS actions affecting the wireless down (outbound) direction…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.207.8.42.8.34.21.8.1.13`
wsAuthenticatedClientSessionTSViolatePktsRecvd Number of packets received by managed APs from a client station throughout the duration of the current WLAN session that are in excess of the client's alotted traffic stream (TS) uplink bandwidth, or are for an access c…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.21.8.1.14`
wsAuthenticatedClientSessionTSViolatePktsTransmitted Number of packets transmitted by managed APs to a client station throughout the duration of the current WLAN session that are in excess of the client's alotted traffic stream (TS) downlink bandwidth, or are for an acces…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.207.8.42.8.34.21.8.1.15`

wsAuthenticatedClientQosCachedStatusTable

table

.1.3.6.1.4.1.207.8.42.8.34.21.9 · 1 row entry · 10 columns

Open in standard view

Uses the allied variant from /opt/observium/mibs/allied.

Command help

Walk wsAuthenticatedClientQosCachedStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-UWC-WLAN-SWITCH-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-UWC-WLAN-SWITCH-MIB::wsAuthenticatedClientQosCachedStatusTable'

This table contains cached client QoS status parameters of clients that are
currently associated with managed APs. These objects represent values
that were retrieved from a RADIUS server for this client. See the
wsAuthenticatedClientQosStatusTable for the current set of operational
values in use for this client.

wsAuthenticatedClientQosCachedStatusEntry row .1.3.6.1.4.1.207.8.42.8.34.21.9.1

Indexes

No indexes recorded

Column Syntax OID

wsAuthenticatedClientQosCachedBandwidthLimitDown

wsAuthenticatedClientQosCachedBandwidthLimitUp

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.207.8.42.8.34.21.9.1.1