AT-FIBER-MONITORING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
15

atFiberMonConfigTable

table
.1.3.6.1.4.1.207.8.4.4.3.27.2 · 1 row entry · 6 columns
Open in standard view
Uses the allied variant from /opt/observium/mibs/allied.
Command help
Walk atFiberMonConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-FIBER-MONITORING-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-FIBER-MONITORING-MIB::atFiberMonConfigTable' 
It contains the objects used to configure the operation of fiber monitoring.
atFiberMonConfigEntry row .1.3.6.1.4.1.207.8.4.4.3.27.2.1
Entry for the table. It contains the configurables of fiber monitering for an interface.
Indexes
Column Syntax OID
atFiberMonIfname
The name of the interface where the pluggable is in.
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.207.8.4.4.3.27.2.1.1
atFiberMonEnable
Enable or disable fiber monitoring.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
Constraints:
range: 0-65535
 .1.3.6.1.4.1.207.8.4.4.3.27.2.1.2
atFiberMonInterval
Fiber monitoring polling interval in seconds.
Integer32r/w
Constraints:
range: 0-65535
range: 2-60
 .1.3.6.1.4.1.207.8.4.4.3.27.2.1.3
atFiberMonSensitivity
The sensitivity for fiber monitoring.

Acceptable mode strings and value ranges are as below:

low - 2dB
medium - 1dB
high - 0.5dB
h…
OctetStringr/w .1.3.6.1.4.1.207.8.4.4.3.27.2.1.4
atFiberMonBaseline
The baseline value for firber mornitoring.

Acceptable mode string and value ranges are as below:

average <12-150> - number of readings used to calculate moving average.
fixed <1-65535> - f…
OctetStringr/w .1.3.6.1.4.1.207.8.4.4.3.27.2.1.5
atFiberMonAlarmAction
Actions to take when an alarm occurs.
Acceptable values are:
1. Log a message only.
2. Send snmp trap and log.
3. Shut down the interface and log.
4. Send trap, shutdown and log.
Enumerationr/w
Enumerated Values:
1logOnly
2sendTrap
3shutdown
4sendtrapAndShutdown
 .1.3.6.1.4.1.207.8.4.4.3.27.2.1.6

atFiberMonStateTable

table
.1.3.6.1.4.1.207.8.4.4.3.27.3 · 1 row entry · 9 columns
Open in standard view
Uses the allied variant from /opt/observium/mibs/allied.
Command help
Walk atFiberMonStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-FIBER-MONITORING-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-FIBER-MONITORING-MIB::atFiberMonStateTable' 
This table contains the information of fiber monitoring state for SFPs.
atFiberMonStateEntry row .1.3.6.1.4.1.207.8.4.4.3.27.3.1
Entry for fiber monitoring state table. It contains state values for a fiber channel.
Indexes
Column Syntax OID
atFiberMonIfindex
The index of the interface where the pluggable is in.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.207.8.4.4.3.27.3.1.1
atFiberMonChannel
The channel number of the pluggable.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.207.8.4.4.3.27.3.1.2
atFiberMonlIfDescription
Interface description. Normally it would be the name of the interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.4.4.3.27.3.1.3
atFiberMonActualBaseline
The calculated baseline value for the link, in units of 0.0001mW.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.207.8.4.4.3.27.3.1.4
atFiberMonThreshold
Threshold value for alarm to occur, in units of 0.0001mW.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.207.8.4.4.3.27.3.1.5
atFiberMonReadingHistory
The reading history. It is a string containing last 12 readings.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.4.4.3.27.3.1.6
atFiberMonMinReading
The minimum reading of rx power, in units of 0.0001mW.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.207.8.4.4.3.27.3.1.7
atFiberMonMaxReading
The maximum reading of rx power, in units of 0.0001mW.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.207.8.4.4.3.27.3.1.8
atFiberMonLastReading
The most recent reading of rx power, in units of 0.0001mW. -1 is returned if no readings have been taken yet.
Integer32
Constraints:
range: -1-65535
 .1.3.6.1.4.1.207.8.4.4.3.27.3.1.9