AT-ENVMON-MIB

        The AT Environment Monitoring MIB for managing and
reporting data relating to voltage rails, fan speeds,
temperature sensors and power supply units.
    
Source file
AT-ENVMON-MIB
Last revised
Identity
envMon
Base OID
1.3.6.1.4.1.207.8.4.4.3.10
Imported Objects
AT-SMI-MIB DisplayStringUnsized
AT-SYSINFO-MIB sysinfo
IF-MIB ifIndex
SNMPv2-SMI enterprises MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the allied-old MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'AT-ENVMON-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'AT-ENVMON-MIB::envMon'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-ENVMON-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-ENVMON-MIB::envMon'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (42)
.1.3.6.1.4.1.207.8.4.4.3.10
.1.3.6.1.4.1.207.8.4.4.3.10.1
.1.3.6.1.4.1.207.8.4.4.3.10.1.1
.1.3.6.1.4.1.207.8.4.4.3.10.1.1.1
.1.3.6.1.4.1.207.8.4.4.3.10.1.1.2
OctetString
.1.3.6.1.4.1.207.8.4.4.3.10.1.1.3
.1.3.6.1.4.1.207.8.4.4.3.10.1.1.4
.1.3.6.1.4.1.207.8.4.4.3.10.1.1.5
.1.3.6.1.4.1.207.8.4.4.3.10.1.1.6
.1.3.6.1.4.1.207.8.4.4.3.10.2
.1.3.6.1.4.1.207.8.4.4.3.10.2.1
.1.3.6.1.4.1.207.8.4.4.3.10.2.1.1
.1.3.6.1.4.1.207.8.4.4.3.10.2.1.2
OctetString
.1.3.6.1.4.1.207.8.4.4.3.10.2.1.3
.1.3.6.1.4.1.207.8.4.4.3.10.2.1.4
.1.3.6.1.4.1.207.8.4.4.3.10.2.1.5
.1.3.6.1.4.1.207.8.4.4.3.10.2.1.6
.1.3.6.1.4.1.207.8.4.4.3.10.2.1.7
.1.3.6.1.4.1.207.8.4.4.3.10.3
.1.3.6.1.4.1.207.8.4.4.3.10.3.1
.1.3.6.1.4.1.207.8.4.4.3.10.3.1.1
.1.3.6.1.4.1.207.8.4.4.3.10.3.1.2
OctetString
.1.3.6.1.4.1.207.8.4.4.3.10.3.1.3
.1.3.6.1.4.1.207.8.4.4.3.10.3.1.4
.1.3.6.1.4.1.207.8.4.4.3.10.3.1.5
.1.3.6.1.4.1.207.8.4.4.3.10.3.1.6
.1.3.6.1.4.1.207.8.4.4.3.10.4
.1.3.6.1.4.1.207.8.4.4.3.10.4.1
.1.3.6.1.4.1.207.8.4.4.3.10.4.1.1
.1.3.6.1.4.1.207.8.4.4.3.10.4.1.1.1
.1.3.6.1.4.1.207.8.4.4.3.10.4.1.1.2
.1.3.6.1.4.1.207.8.4.4.3.10.4.1.1.3
ObjectIdentifier
.1.3.6.1.4.1.207.8.4.4.3.10.4.1.1.4
OctetString
.1.3.6.1.4.1.207.8.4.4.3.10.4.1.1.5
.1.3.6.1.4.1.207.8.4.4.3.10.4.2
.1.3.6.1.4.1.207.8.4.4.3.10.4.2.1
.1.3.6.1.4.1.207.8.4.4.3.10.4.2.1.1
.1.3.6.1.4.1.207.8.4.4.3.10.4.2.1.2
.1.3.6.1.4.1.207.8.4.4.3.10.4.2.1.3
OctetString
.1.3.6.1.4.1.207.8.4.4.3.10.4.2.1.4
.1.3.6.1.4.1.207.8.4.4.3.10.4.2.1.5
.1.3.6.1.4.1.207.8.4.4.3.10.5
Dependencies (8) 5 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. AT-SMI-MIBallied-old
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. AT-SYSINFO-MIBallied-old
  9. AT-ENVMON-MIBallied-oldselected
Type Definitions (1)
Enumeration
psbSensorTypeInvalid(0)
fanSpeedDiscrete(1)
temperatureDiscrete(2)
voltageDiscrete(3)
Notifications / Traps (8)
NameOIDDescription
.1.3.6.1.4.1.207.8.4.4.3.10.5.1
Triggered when the monitored speed of a fan
drops below its lower threshold.
.1.3.6.1.4.1.207.8.4.4.3.10.5.2
Triggered when the monitored speed of a fan
returns to an acceptable value, the fan
having previously been in an alarm condition.
.1.3.6.1.4.1.207.8.4.4.3.10.5.3
Triggered when the voltage of a monitored
voltage rail, goes out of tolerance by
either dropping below its lower threshold,
or exceeding its upper threshold.
.1.3.6.1.4.1.207.8.4.4.3.10.5.4
Triggered when the voltage of a monitored
voltage rail returns to an acceptable value,
having previously been in an alarm condition.
.1.3.6.1.4.1.207.8.4.4.3.10.5.5
Triggered when a monitored temperature
exceeds its upper threshold.
.1.3.6.1.4.1.207.8.4.4.3.10.5.6
Triggered when a monitored temperature
returns to an acceptable value, having
previously been in an alarm condition.
.1.3.6.1.4.1.207.8.4.4.3.10.5.7
Triggered when a monitored parameter of
a power supply bay device goes out of
tolerance.
.1.3.6.1.4.1.207.8.4.4.3.10.5.8
Triggered when a monitored parameter of
a power supply bay device returns to an
acceptable value, having previously been
in an alarm condition.