ASANTE-AH1012-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
11
Rows
11
Columns
108

ipagentTrapRcvrTable

table mandatory
.1.3.6.1.4.1.298.1.1.5.2 · 1 row entry · 3 columns
Uses the asante variant from /opt/observium/mibs/asante.
Command help
Walk ipagentTrapRcvrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASANTE-AH1012-MIB' -M '/opt/observium/mibs/asante:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASANTE-AH1012-MIB::ipagentTrapRcvrTable'
Table consisting of the list of Network Management  
Stations that are to receive traps generated by this 
agent.
ipagentTrapRcvrEntry row .1.3.6.1.4.1.298.1.1.5.2.1
Destination IP address and community string for
a particular trap server.
Column Syntax OID
IP address for trap server receiving trap.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.298.1.1.5.2.1.1
Validation of individual trap receiver. If value
of this object is set to invalid(3), then that
particular entry is deemed invalid, meaning that
the address for that entry is no longer v…
Enumerationr/w
Enumerated Values:
1other
2valid
3invalid
.1.3.6.1.4.1.298.1.1.5.2.1.2
Community string for traps sent to this trap
receiver.
OctetStringr/w .1.3.6.1.4.1.298.1.1.5.2.1.3

concChassisPsTable

table mandatory
.1.3.6.1.4.1.298.1.3.1.1.4 · 1 row entry · 3 columns
Uses the asante variant from /opt/observium/mibs/asante.
Command help
Walk concChassisPsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASANTE-AH1012-MIB' -M '/opt/observium/mibs/asante:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASANTE-AH1012-MIB::concChassisPsTable'
This table contains concentrator's power supply     
information.
concChassisPsEntry row .1.3.6.1.4.1.298.1.3.1.1.4.1
The entry in the table containing the information
about a single power supply.
Column Syntax OID
The value of this object identifies the
power supply table for which this entry
contains power supply type and status.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.1.1.4.1.1
The value of this object identifies the
power supply module type.
Enumeration
Enumerated Values:
1other
.1.3.6.1.4.1.298.1.3.1.1.4.1.2
The value of this object identifies the
power supply module status.
Enumeration
Enumerated Values:
1other
2good
3bad
.1.3.6.1.4.1.298.1.3.1.1.4.1.3

concChassisGrpTable

table mandatory
.1.3.6.1.4.1.298.1.3.1.1.8 · 1 row entry · 5 columns
Uses the asante variant from /opt/observium/mibs/asante.
Command help
Walk concChassisGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASANTE-AH1012-MIB' -M '/opt/observium/mibs/asante:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASANTE-AH1012-MIB::concChassisGrpTable'
A table that contains information about the     
group/slot in this chassis.
concChassisGrpEntry row .1.3.6.1.4.1.298.1.3.1.1.8.1
A list of information for each slot in this chassis.
Column Syntax OID
The value of this object identifies the
chassis group table for which this entry
contains group related information.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.1.1.8.1.1
The number of port is available for up/down link
within this group.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.1.1.8.1.2
The value represents the function of this group.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.1.1.8.1.3
A description of this group device.
DisplayString .1.3.6.1.4.1.298.1.3.1.1.8.1.4
The hardware revision number of this particular
group.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.1.1.8.1.5

eGrpStatisticsTable

table mandatory
.1.3.6.1.4.1.298.1.3.3.1.3 · 1 row entry · 18 columns
Uses the asante variant from /opt/observium/mibs/asante.
Command help
Walk eGrpStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASANTE-AH1012-MIB' -M '/opt/observium/mibs/asante:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASANTE-AH1012-MIB::eGrpStatisticsTable'
Table of statistical information for each group.
eGrpStatisticsEntry row .1.3.6.1.4.1.298.1.3.3.1.3.1
Entry for individual group in table.
Indexes
Column Syntax OID
eGrpStatIndexmandatory
The value of this object identifies the group
for which this entry contains group statistical
information.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.3.1.1
Group counter of 'good' or readable frames. Frame
is between 64 and 1518 bytes in length and
has SFD and good FCS.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.3.1.2
Group counter of number of muliticast frames.
1st bit in highest ordered bytes of destination
address is set to 1. Broadcast packets are not
included.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.3.1.3
Group counter of number of broadcast frames. All
1s in network destination address. Multicast
packets are not included.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.3.1.4
Group counter for data frames longer than 1518
bytes, with a SFD and good FCS.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.3.1.5
eGrpStatRuntsmandatory
Group counter for data frames with size less than
64 bytes, with no CRC or alignment errors.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.3.1.6
Group counter of frames which are not integer
multiples of 1 byte .
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.3.1.7
Group counter of frames greater than 2 bytes and
less than 64 bytes, with SFD and bad FCS
(CRC error).
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.3.1.8
Group counter frames that failed Cyclic
Redundancy Check (CRC).
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.3.1.9
Group counter of Interframe Gap Errors
where time period between data frames is less than
5.5 micro seconds.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.3.1.10
Group counter of errors where incoming data rate
is not with in the tolerance level of
10 MHZ + or - 0.01%.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.3.1.11
Group counter of data burst where data is less than
10 bytes in length, with no SFD.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.3.1.12
Group counter of collision flags.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.3.1.13
Group counter of collisions occurring after the 64
byte collision window.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.3.1.14
eGrpStatMJLPsmandatory
Group counter of MAU jabber lockup protection
where hub repeater chip goes into lockup state.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.3.1.15
Group counter of ports in group autopartitioned in
response to 31 or more continuous collisions.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.3.1.16
Group counter of a burst of data greater than or
equal to 10 bytes in length with no SFD.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.3.1.17
Group counter of total errored frames including
toolong, runts, misaligned, or bad FCS.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.3.1.18

ePortStatisticsTable

table mandatory
.1.3.6.1.4.1.298.1.3.3.1.4 · 1 row entry · 19 columns
Uses the asante variant from /opt/observium/mibs/asante.
Command help
Walk ePortStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASANTE-AH1012-MIB' -M '/opt/observium/mibs/asante:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASANTE-AH1012-MIB::ePortStatisticsTable'
Table for port specific network statistics.
ePortStatisticsEntry row .1.3.6.1.4.1.298.1.3.3.1.4.1
Entry for individual port in table.
Column Syntax OID
ePortGrpIndexmandatory
The value of this object identifies the group for
which this entry contains port statistical
information.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.4.1.1
ePortIndexmandatory
The value of this object identifies the port for
which this entry contains port statistical
information.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.4.1.2
Port counter of good or readable frames. Frame is
between 64 and 1518 bytes in length and
has SFD and good FCS.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.4.1.3
Port counter of number of muliticast frames. 1st
bit in highest ordered bytes of destination address
is set to 1. Broadcast packets are not included.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.4.1.4
Port counter of number of broadcast frames. All
1s in network destination address. Multicast
packets are not included.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.4.1.5
Port counter for data frames longer than 1518
bytes, with a SFD and good FCS.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.4.1.6
Port counter for data frames with size less than
64 bytes, with no CRC or alignment errors.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.4.1.7
Port counter of frames which are not integer
multiples of 1 byte.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.4.1.8
Port counter of frames greater than 2 bytes and
less than 64 bytes, with SFD and bad
FCS (CRC error).
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.4.1.9
Port counter of frames that failed Cyclic
Redundancy Check (CRC).
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.4.1.10
Port counter of Interframe Gap Errors where
time period between data frames is less than 5.5
micro seconds.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.4.1.11
Port counter of errors where incoming data rate
is not with in the tolerance level of
10 MHZ + or - 0.01%.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.4.1.12
Port counter of data burst where data is less than
10 bytes in length, with no SFD.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.4.1.13
Port counter of collision flags.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.4.1.14
Port counter of collisions occurring after the 64
byte collision window.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.4.1.15
Port counter of MAU jabber lockup protection
where hub repeater chip goes into lockup state.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.4.1.16
Port counter of number of times port was
autopartitioned in response to 31 or more
continuous collisions.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.4.1.17
Port counter of a burst of data greater than or
equal to 10 bytes in length with no SFD.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.4.1.18
Port counter of total errored frames including
toolong, runts, misaligned, or bad FCS.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.4.1.19

eTrafficMatrixTable

table mandatory
.1.3.6.1.4.1.298.1.3.3.1.5 · 1 row entry · 3 columns
Uses the asante variant from /opt/observium/mibs/asante.
Command help
Walk eTrafficMatrixTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASANTE-AH1012-MIB' -M '/opt/observium/mibs/asante:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASANTE-AH1012-MIB::eTrafficMatrixTable'
Table to analyze the number of packets received     
through network traffic by the size of each packet.
eTrafficMatrixEntry row .1.3.6.1.4.1.298.1.3.3.1.5.1
Individual entry in matrix of packet lengths table.
Column Syntax OID
Starting length for each range in table.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.5.1.1
Range of packet sizes to be scanned for in network
traffic.
Enumeration
Enumerated Values:
1other
2from-1-to-63-bytes
3from-64-to-127-bytes
4from-128-to-255-bytes
5from-256-to-511-bytes
6from-512-to-767-bytes
7from-768-to-1023-bytes
8from-1024-to-1518-bytes
9from-512-to-1023-bytes
10from-65-to-511-bytes
11exact-64-bytes
12over-1518-bytes
.1.3.6.1.4.1.298.1.3.3.1.5.1.2
Counter for number of frames received for
particular range specified by the MatrixRange.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.3.1.5.1.3

ePortRateTable

table optional
.1.3.6.1.4.1.298.1.3.3.1.6.1.6 · 1 row entry · 19 columns
Uses the asante variant from /opt/observium/mibs/asante.
Command help
Walk ePortRateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASANTE-AH1012-MIB' -M '/opt/observium/mibs/asante:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASANTE-AH1012-MIB::ePortRateTable'
Network statistics for individual ports measured    
in Rate/Second.
ePortRateEntry row .1.3.6.1.4.1.298.1.3.3.1.6.1.6.1
Individual entry in port rate table.
Column Syntax OID
The value of this object identifies the group for
which this entry contains port statistical
information.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.1
This value identifies the port for which
this entry contains port statistical information.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.2
Rate of occurrence of good or readable frames.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.3
Rate of occurrence of number of muliticast frames.
1st bit in highest ordered bytes of destination
address is set to 1. Broadcast packets are
not included.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.4
Rate of occurrence of number of broadcast frames.
All 1s in network destination address. Multicast
packets are not included.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.5
Rate of occurrence of data frames longer than 1518
bytes, with a SFD and good FCS.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.6
Rate of occurrence of data frames with size less
than 64 bytes, with no CRC or alignment errors.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.7
Rate of occurrence of frames which are not integer
multiples of 1 byte.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.8
Rate of occurrence of frames greater than 2 bytes
and less than 64 bytes, with SFD and bad
FCS (CRC error).
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.9
Rate of occurrence of frames that failed Cyclic
Redundancy Check (CRC).
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.10
Rate of occurrence of interframe Gap Errors where
time period between data frames is less than 5.5
micro seconds.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.11
Rate of occurrence of errors where incoming data
rate is not with in the tolerance level of
10 MHz + or - 0.01%.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.12
Rate of occurrence of data burst where data is less
than 10 bytes in length, with no SFD.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.13
Rate of occurrence of collision flags.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.14
Rate of occurrence of collisions occurring after the
64 byte collision window.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.15
Rate of occurrence of MAU jabber lockup
protection where hub repeater chip goes into
lockup state.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.16
Rate of occurrence of times port was
autopartitioned in response to 31 or
more continuous collisions.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.17
Rate of occurrence of a burst of data greater than
or equal to 10 bytes in length with no SFD.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.18
Rate of occurrence of total errored frames
including toolong, runts, misaligned, or bad FCS.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.19

ePortStateCtrlTable

table mandatory
.1.3.6.1.4.1.298.1.3.4.1.1 · 1 row entry · 12 columns
Uses the asante variant from /opt/observium/mibs/asante.
Command help
Walk ePortStateCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASANTE-AH1012-MIB' -M '/opt/observium/mibs/asante:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASANTE-AH1012-MIB::ePortStateCtrlTable'
Table for port control parameters.
ePortStateCtrlEntry row .1.3.6.1.4.1.298.1.3.4.1.1.1
Individual entry of port control in table.
Column Syntax OID
The value of this object identifies the group for
which this entry contains port control information.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.4.1.1.1.1
This value identifies the port for which this
entry contains port control information.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.4.1.1.1.2
Type of cabling physically connected to port.
Enumeration
Enumerated Values:
1other
2bNC
3aUI
4rJ45
5foil
6three-in-one
.1.3.6.1.4.1.298.1.3.4.1.1.1.3
Link status for particular port. On=physical link
if link test enabled. Off=no physical link
exists or link test is disabled.
Enumeration
Enumerated Values:
1others
2linkon
3linkoff
.1.3.6.1.4.1.298.1.3.4.1.1.1.4
Set can enable or disabled link integrity test.
Get will say if link integrity test is enabled (2)
or disabled (3).
Enumerationr/w
Enumerated Values:
1others
2linkTestEnable
3linkTestDisable
.1.3.6.1.4.1.298.1.3.4.1.1.1.5
Whether port has been autopartitioned (2) or not
autopartitioned (3).
Enumeration
Enumerated Values:
1others
2autopartitioned
3notautopartitioned
.1.3.6.1.4.1.298.1.3.4.1.1.1.6
Jabber detection for port. If On(2), then
jabber occurred on this port. Off(3), then no jabber
occurred or jabber detection has been manually
disabled.
Enumeration
Enumerated Values:
1others
2on
3off
.1.3.6.1.4.1.298.1.3.4.1.1.1.7
Set can enable or disable jabber detection test. Get
will say if jabber detection test is enabled (2)
or disabled (3).
Enumerationr/w
Enumerated Values:
1others
2enabled
3disabled
.1.3.6.1.4.1.298.1.3.4.1.1.1.8
Set will manually enable or disable any port. Get
will say if port has been enabled (2) or
disabled (3).
Enumerationr/w
Enumerated Values:
1others
2enabled
3disabled
.1.3.6.1.4.1.298.1.3.4.1.1.1.9
Whether RecvThreshold has been enabled or
disabled. Can use this to lower noise threshold
(tolerance) so that longer twisted pair links
can be used.
Enumerationr/w
Enumerated Values:
1others
2unreduce
3reduce
.1.3.6.1.4.1.298.1.3.4.1.1.1.10
Polarity is correct (2) or not for this port.
Enumeration
Enumerated Values:
1others
2normal
3reversed
.1.3.6.1.4.1.298.1.3.4.1.1.1.11
Autopolarity correction enabled or disabled.
Allows hub to make electrical corrections
automatically if cable does not reverse polarity
within wire pairs. If do not want this correction to
take p…
Enumerationr/w
Enumerated Values:
1others
2enabled
3disabled
.1.3.6.1.4.1.298.1.3.4.1.1.1.12

nodeSummaryTable

table mandatory
.1.3.6.1.4.1.298.1.3.5.1 · 1 row entry · 7 columns
Uses the asante variant from /opt/observium/mibs/asante.
Command help
Walk nodeSummaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASANTE-AH1012-MIB' -M '/opt/observium/mibs/asante:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASANTE-AH1012-MIB::nodeSummaryTable'
Node summary of all traffic through hub.
nodeSummaryEntry row .1.3.6.1.4.1.298.1.3.5.1.1
Individual entry in node summary table.
Column Syntax OID
Group Id for identifying the group
where node activity is detected.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.5.1.1.1
Port Id for identifying the port where
node activity is detected.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.5.1.1.2
The source MAC address of the node
that is transmitting frames
received by this port.
PhysAddress .1.3.6.1.4.1.298.1.3.5.1.1.3
The destination MAC address of the
node to which frames are being
received by this port.
PhysAddress .1.3.6.1.4.1.298.1.3.5.1.1.4
The 2 bytes after the source (src) address
in packet.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.5.1.1.5
Destination and source IP address if packet is
an Ethernet IP packet. It the packet is not an
Ethernet IP packet, then the information may
not be accurate.
OctetString .1.3.6.1.4.1.298.1.3.5.1.1.6
nodeSummary entry time stamp (in hundredths of a
second) since the network management portion of the
system was last re-initialized.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.298.1.3.5.1.1.7

nodeSecuLev1Table

table mandatory
.1.3.6.1.4.1.298.1.3.5.2.1 · 1 row entry · 5 columns
Uses the asante variant from /opt/observium/mibs/asante.
Command help
Walk nodeSecuLev1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASANTE-AH1012-MIB' -M '/opt/observium/mibs/asante:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASANTE-AH1012-MIB::nodeSecuLev1Table'
Table of nodes which have access to particular      
ports.  Nodes are identified by MAC address.
nodeSecuLev1Entry row .1.3.6.1.4.1.298.1.3.5.2.1.1
Individual entry for node security table.
Column Syntax OID
Group ID for port which verifying node access.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.5.2.1.1.1
Specific port for which verifying node access.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.5.2.1.1.2
Address is valid or invalid.
Enumerationr/w
Enumerated Values:
1other
2valid
3invalid
.1.3.6.1.4.1.298.1.3.5.2.1.1.3
MAC address of nodes allowed for particular port.
PhysAddressr/w .1.3.6.1.4.1.298.1.3.5.2.1.1.4
Set action for node intrusion violation.
Enumerationr/w
Enumerated Values:
1other
2partition-port
3send-trap
4partition-port-and-send-trap
5send-trap-and-request-page
6partition-port-and-send-trap-and-request-page
.1.3.6.1.4.1.298.1.3.5.2.1.1.5

thresholdLev1Table

table optional
.1.3.6.1.4.1.298.1.3.6.1.1 · 1 row entry · 14 columns
Uses the asante variant from /opt/observium/mibs/asante.
Command help
Walk thresholdLev1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASANTE-AH1012-MIB' -M '/opt/observium/mibs/asante:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASANTE-AH1012-MIB::thresholdLev1Table'
Threshold/trap table.
thresholdLev1Entry row .1.3.6.1.4.1.298.1.3.6.1.1.1
Individual entry in threshold trap table.
Column Syntax OID
An index that uniquely identifies an entry in the
alarm table.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.6.1.1.1.1
Status of entry in threshold/trap table.
Enumerationr/w
Enumerated Values:
1other
2valid
3invalid
.1.3.6.1.4.1.298.1.3.6.1.1.1.2
Set target for threshold definition. Either whole
hub(2) or particular port (3).
Enumerationr/w
Enumerated Values:
1other
2hub
3port
.1.3.6.1.4.1.298.1.3.6.1.1.1.3
Group ID for trap set. One note--if the
target is selected as hub, the group index
will be ignored.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.6.1.1.1.4
Port number for trap set. One note--if the
target is selected as hub, the port index
will be ignored.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.6.1.1.1.5
Variable checking for in trap. These are the type
of frames that a trap will be verified against.
Enumerationr/w
Enumerated Values:
1other
2readable-frames
3mcast-frames
4bcast-frames
5frame-too-longs
6runts
7alignment-errors
8fragment-errors
9fCS-errors
10iFG-errors
11data-rate-mismatch
12short-events
13collisions
14late-collisions
15auto-partitions
16sfd-missing
17bad-frames
.1.3.6.1.4.1.298.1.3.6.1.1.1.6
The method of sampling the selected variable
and calculating the value to be compared
against the threshold.
Enumerationr/w
Enumerated Values:
1other
2event-per-second
.1.3.6.1.4.1.298.1.3.6.1.1.1.7
When the trap is triggered in relation to value set.
When goes above (2), below (3), or changes at
all from (4).
Enumerationr/w
Enumerated Values:
1other
2rising
3falling
4rising-or-falling
.1.3.6.1.4.1.298.1.3.6.1.1.1.8
Counter of threshold.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.6.1.1.1.9
The value of the statistic for the last
sampling period.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.6.1.1.1.10
How to respond to a triggered event for a
rising event.
Enumerationr/w
Enumerated Values:
1other
2partition-port
3send-trap
4partition-port-and-send-trap
5send-trap-and-request-page
6partition-port-and-send-trap-and-request-page
.1.3.6.1.4.1.298.1.3.6.1.1.1.11
How to respond to a triggered event for a
falling event.
Enumerationr/w
Enumerated Values:
1other
2partition-port
3send-trap
4partition-port-and-send-trap
5send-trap-and-request-page
6partition-port-and-send-trap-and-request-page
.1.3.6.1.4.1.298.1.3.6.1.1.1.12
The interval in seconds over which the data is
sampled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.298.1.3.6.1.1.1.13
8-byte octet reserved for the owner who
defined this entry.
OctetStringr/w
Constraints:
range: 8-8
.1.3.6.1.4.1.298.1.3.6.1.1.1.14