ARUBAWIRED-TEMPSENSOR-MIB

Monitored by Observium
        This MIB module describes management objects that manage Temperature
Sensors.
    
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Sensors
Explore Observium network monitoring
Source file
ARUBAWIRED-TEMPSENSOR-MIB
Last revised
Identity
arubaWiredTempSensor
Base OID
1.3.6.1.4.1.47196.4.1.1.3.11.3
Imported Objects
ARUBAWIRED-CHASSIS-MIB arubaWiredChassisMIB
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC DisplayString
Net-SNMP examples using the aruba MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ARUBAWIRED-TEMPSENSOR-MIB' -M '/opt/observium/mibs/aruba:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ARUBAWIRED-TEMPSENSOR-MIB::arubaWiredTempSensor'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARUBAWIRED-TEMPSENSOR-MIB' -M '/opt/observium/mibs/aruba:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARUBAWIRED-TEMPSENSOR-MIB::arubaWiredTempSensor'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (16)
2 directly used by Observium
.1.3.6.1.4.1.47196.4.1.1.3.11.3
.1.3.6.1.4.1.47196.4.1.1.3.11.3.0
.1.3.6.1.4.1.47196.4.1.1.3.11.3.1
.1.3.6.1.4.1.47196.4.1.1.3.11.3.1.1
Integer32
.1.3.6.1.4.1.47196.4.1.1.3.11.3.1.1.1
Integer32
.1.3.6.1.4.1.47196.4.1.1.3.11.3.1.1.2
Integer32
.1.3.6.1.4.1.47196.4.1.1.3.11.3.1.1.3
Integer32
.1.3.6.1.4.1.47196.4.1.1.3.11.3.1.1.4
OctetString
.1.3.6.1.4.1.47196.4.1.1.3.11.3.1.1.5
OctetString
.1.3.6.1.4.1.47196.4.1.1.3.11.3.1.1.6
millidegrees CelsiusSNMPv2-SMIInteger32
.1.3.6.1.4.1.47196.4.1.1.3.11.3.1.1.7
millidegrees CelsiusSNMPv2-SMIInteger32
.1.3.6.1.4.1.47196.4.1.1.3.11.3.1.1.8
millidegrees CelsiusSNMPv2-SMIInteger32
.1.3.6.1.4.1.47196.4.1.1.3.11.3.1.1.9
.1.3.6.1.4.1.47196.4.1.1.3.11.3.99
.1.3.6.1.4.1.47196.4.1.1.3.11.3.99.1
.1.3.6.1.4.1.47196.4.1.1.3.11.3.99.2
Dependencies (5) 4 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (2)
A collection of objects display configuration, status,
and measurements of Temperature Sensor table.
.1.3.6.1.4.1.47196.4.1.1.3.11.3.99.2.1
Notifications sent by temperature sensor management.
.1.3.6.1.4.1.47196.4.1.1.3.11.3.99.2.2
Compliance Statements (1)

OID .1.3.6.1.4.1.47196.4.1.1.3.11.3.99.1.1
A compliance statement for Aruba switch chassis.
Required groups
mandatory arubaWiredTempSensorTable
mandatory arubaWiredTempSensorNotificationsGroup
optional arubaWiredTempSensorTableGroup A Collection of Object(s) that display the current
temperature sensor parameters information.
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.4.1.47196.4.1.1.3.11.3.0.1
A notification generated when a temperature sensor state change
occurs. This can happen if a temperature sensor experiences a
fault or critical temperature value.