ARUBAWIRED-RPVST-MIB Table View

Information describing the RPVST configuration
and statistics of the VLANs.

arubaWiredRpvstVlanEntry row .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1

Information describing the RPVST configuration
and statistics of each of the VLANs.

Indexes

arubaWiredRpvstVlanId

Column	Syntax	OID
arubaWiredRpvstVlanId A VLAN ID to uniquely identify the entries.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.1
arubaWiredRpvstVlanHelloTime The amount of time between the transmission of configuration BPDUs by this node on any port in this VLAN when it is root of the spanning tree, or trying to become so for this VLAN.	secondsInteger32r/w Constraints: range: 2-10	.1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.2
arubaWiredRpvstVlanForwardDelay The amount of time between transitioning from listening to learning and learning to forwarding by this node on any port when it is acting as a root for this VLAN.	secondsInteger32r/w Constraints: range: 4-30	.1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.3
arubaWiredRpvstVlanMaxAge The maximum age of RPVST information learned from the network on any port before it is discarded.	secondsInteger32r/w Constraints: range: 6-40	.1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.4
arubaWiredRpvstVlanPriority The value of the write-able portion of the Bridge ID (i.e., the first two octets of the (8 octet long) Bridge ID). The other (last) 6 octets of the Bridge ID are given by the value dot1dBridgeBaseAddress.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.5
arubaWiredRpvstVlanRoot To explicitly configure this switch to be primary/secondary root for this VLAN.	Enumerationr/w Enumerated Values: 0 none 1 primary 2 secondary	.1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.6
arubaWiredRpvstVlanRpvstAdminStatus To enable/disable RPVST on the VLAN.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.7
arubaWiredRpvstVlanResetCounters Setting this object to true(1) will reset the RPVST counters for this VLAN.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.8
arubaWiredRpvstVlanOperHelloTime The amount of time between the transmission of BPDUs by this node on any port in this VLAN when it is root of the spanning tree, or trying to become so for this VLAN. This is the actual value that this bridge is using.	secondsInteger32 Constraints: range: 1-10	.1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.9
arubaWiredRpvstVlanRootPriority The priority of root bridge in this VLAN.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.10
arubaWiredRpvstVlanRootPort The root port for this VLAN.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.11
arubaWiredRpvstVlanRootPathCost The path cost to the Root from this bridge in this VLAN.	Integer32 Constraints: range: 0-200000000	.1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.12
arubaWiredRpvstVlanRootMacAddress MAC address of the Root in this VLAN.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.13
arubaWiredRpvstVlanRootChangeCounter The number of times the root has changed for this VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.14
arubaWiredRpvstVlanTimeSinceLastTopoChange The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity for this VLAN.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.15
arubaWiredRpvstVlanTopoChangeCount The total number of topology changes detected by this bridge in this VLAN since the management entity was last reset or initialized.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.16
arubaWiredRpvstVlanSendTopoChangeCtrl Setting this object to true(1) will enable sending of SNMP notifications for all topology change events on this VLAN.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.17
arubaWiredRpvstVlanLogPortStateTransitions Setting this object to true(1) will enable event logging of PVST port state transitions for this VLAN.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.18

Information describing the RPVST specific
configuration and statistics of the ports.

arubaWiredRpvstPortEntry row .1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1

Information describing the RPVST specific
configuration and statistics of the ports.

Indexes

arubaWiredRpvstPortIndex

Column	Syntax	OID
arubaWiredRpvstPortIndex The port ifIndex	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.1
arubaWiredRpvstPortAdminEdge The administrative value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) indicates that this port should be assumed as a non-edge-port. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.2
arubaWiredRpvstPortAdminPointToPoint Refer the PointToPoint textual-convention.	PointToPointr/w Type Values: 1 forceTrue 2 forceFalse 3 auto	.1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.3
arubaWiredRpvstPortAutoEdge It is used by the Bridge detection state machine for the automatic identification of edge ports.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.4
arubaWiredRpvstPortBpduFiltering This value indicates whether or not BPDUs need to be filtered on this port and BPDU filter option forces a port to always stay in the forwarding state and be excluded from standard STP operation. If the value is true(1)…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.5
arubaWiredRpvstPortRestrictedTcn This value indicates whether or not to propagate topology changes to other ports. true(1) causes the port not to propagate topology changes to other ports.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.6
arubaWiredRpvstPortRootGuard Setting this object to true(1) forces port to not to be selected as root port even if this port has the least path cost to the root.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.7
arubaWiredRpvstPortLoopGuard Setting this object to true(1) causes the non-designated port to go into the STP loop inconsistent state instead of the forwarding state. In the loop-inconsistent state, the port prevents data traffic through the link, …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.8
arubaWiredRpvstPortBpduProtection Setting this true (1) indicates that no BPDUs are expected to be received on this port. At the reception of BPDUs the BPDU protection mechanism will disable this port and port will transition into BPDU Error state.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.9

Information describing the RPVST configuration
and statistics of the ports in the given VLAN.

arubaWiredRpvstPortVlanEntry row .1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1

Information describing the RPVST configuration
and statistics of the ports in the given VLAN.

Indexes

arubaWiredRpvstPortVlanId arubaWiredRpvstPortVlanIndex

Column	Syntax	OID
arubaWiredRpvstPortVlanId A VLAN ID to uniquely identify the entries.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.1
arubaWiredRpvstPortVlanIndex The port ifIndex	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.2
arubaWiredRpvstPortVlanPathCost The contribution of this port to the path cost of paths towards the root which include this port. auto(0)	Integer32r/w Constraints: range: 0-200000000	.1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.3
arubaWiredRpvstPortVlanPriority The value of the port priority field that is contained in the first (in network byte order) octet of the (2 octet long) Port ID.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.4
arubaWiredRpvstPortVlanResetCounters Setting this object to true(1) will reset the RPVST counters for this port-vlan pair. Get on this object will always return false(2)	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.5
arubaWiredRpvstPortVlanRole Role played by the port in a given VLAN.	Enumeration Enumerated Values: 1 root 2 alternate 3 designated 4 backup 5 master 6 disabled	.1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.6
arubaWiredRpvstPortVlanState The port's current state. This state controls what action a port takes on reception of a frame.	Enumeration Enumerated Values: 1 disabled 2 blocking 3 listening 4 learning 5 forwarding 6 broken 7 bpduError 8 loopInconsistent 9 pvidInconsistent 10 rootGuard	.1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.7
arubaWiredRpvstPortVlanDesigBridge The Bridge Identifier of the bridge that this port considers to be the Designated Bridge for this port's segment.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.8
arubaWiredRpvstPortVlanOperPointToPoint true : This value indicates that the MAC is connected to a point-to-point LAN segment; i.e., there is at most one other system attached to the LAN segment. false: This value indicates…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.9
arubaWiredRpvstPortVlanOperEdge The operational status of the edge port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) indicates that this port should be assumed as a non-edge-port.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.10
arubaWiredRpvstPortVlanInconsistencyReason The reason for which port is blocked by spanning tree protection function.	Enumeration Enumerated Values: 0 invalid 1 rootProtected 2 loopProtected 3 inconsistentPvidProtected	.1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.11

Information describing the Rpvst configuration
and statistics of the Ports and Vlans.

arubaWiredRpvstNotificationEntry row .1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1

Information describing the Rpvst
events for trap generation.

Indexes

arubaWiredRpvstId

Column	Syntax	OID
arubaWiredRpvstPortName Port name	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.1
arubaWiredRpvstVlanIndex VLAN ID	Integer32 Constraints: range: 0-4097	.1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.2
arubaWiredRpvstPortVlanErrantBpduRxCount The number of BPDUs received on a BPDU-filtering or BPDU-protected enabled port.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.3
arubaWiredRpvstErrantBpduSrcMac The source MAC address of the port sending Errant BPDU.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.4
arubaWiredRpvstSuperiorBpduSrcPort The name of the port sending superior BPDU	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.5
arubaWiredRpvstSuperiorBpduSrcMac The MacAddress of the port sending superior BPDU	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.6
arubaWiredRpvstErrantBpduDetector The identifier of the feature generating Errant BPDU trap.	Enumeration Enumerated Values: 1 bpduFilter 2 bpduProtection	.1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.7
arubaWiredRpvstDesignatedPort Designated Port of the Bridge.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.8
arubaWiredRpvstOldPortRole Old Port state	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.9
arubaWiredRpvstNewPortRole new port state	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.10
arubaWiredRpvstTopoChangeTime Topology change time	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.11
arubaWiredRpvstPreviousRootBridgeID Bridge ID of the previous Root. Bridge Id consists of priority and MAC address.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.12
arubaWiredRpvstNewRootBridgeID Bridge ID of the new Root. Bridge Id consists of priority and MAC address.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.13
arubaWiredRpvstRootBridgeChangeTimeStamp Time when the root changed	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.14
arubaWiredRpvstId VLAN ID	Integer32 Constraints: range: 0-4097	.1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.15