ARRIS-SIP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
44

sipCfgPortTable

table
.1.3.6.1.4.1.4115.11.1.1 · 1 row entry · 28 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk sipCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-SIP-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-SIP-MIB::sipCfgPortTable' 
This table is used to define the SIP configurable data on a per port basis.
sipCfgPortEntry row .1.3.6.1.4.1.4115.11.1.1.1
An entry in the Configuration Port table.
Indexes
Column Syntax OID
sipCfgPortPortNumber
The unique value which identifies the port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.11.1.1.1.1
sipCfgPortUserName
String used for the user portion of the SIP URI for this port. It is
suggested that this string be the phone number of the line so that it
can be used for Caller ID. This object is only settable during
config file do…
OctetStringr/w
Constraints:
range: 0-1023
 .1.3.6.1.4.1.4115.11.1.1.1.2
sipCfgPortDisplayName
String used for the Display Name of the SIP URI. It is recommended that
this be the name of the subscriber so that it can be used for Caller
Name Delivery. This object is only settable during config file download.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.11.1.1.1.3
sipCfgPortLogin
String used for the login name of the SIP agent for this line. This
object is only settable during config file download. Since this
setting is used as part of the authentication process when read
will only show as XXX…
OctetStringr/w
Constraints:
range: 0-1023
 .1.3.6.1.4.1.4115.11.1.1.1.4
sipCfgPortPassword
String used for the password of the SIP agent for this line. This
object is only settable during config file download. Since this
setting is used as part of the authentication process when read
will only show as XXXXX…
OctetStringr/w
Constraints:
range: 0-8192
 .1.3.6.1.4.1.4115.11.1.1.1.5
sipCfgPortWarmOrHotlineNumber
To enable the warm or hotline feature on the line, this object must be set
to the phone number that will be called for the feature. For the warmline
feature this number should be set as well as the timeout object
sipCf…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.11.1.1.1.6
sipCfgPortWarmLineTimeout
This setting is used as the timer (in seconds) for the period of time
after an offhook before an INVITE for the warmline number is sent.
The default value for this object is 5 seconds.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.11.1.1.1.7
sipCfgPortRegistrarAdr
This is the address of the SIP registrar server for this line. This object is only
settable during config file download. It this object is used it will take precedence
over any setting to the sipCfgRegistrarAdr MIB o…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.11.1.1.1.8
sipCfgPortRegistrarPort
This is the port of the SIP registrar server for this line. This object is only
settable during config file download. It this object is used it will take precedence
over any setting to the sipCfgRegistrarAdr MIB obje…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.11.1.1.1.9
sipCfgPortRegistrarType
This is the type for the address of the SIP registrar server for this line. This object
is only settable during config file download. It this object is used it will take
precedence over any setting to the sipCfgRegist…
Enumerationr/w
Enumerated Values:
0ipv4
1dns
 .1.3.6.1.4.1.4115.11.1.1.1.10
sipCfgPortProxyAdr
This is the address of the SIP proxy server for this line. This can be the same server
as the registrar server. This object is only settable during config file download. It this
object is used it will take precedence o…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.11.1.1.1.11
sipCfgPortProxyPort
This is the port of the SIP proxy server for this line. This object is only settable
during config file download. It this object is used it will take precedence over any
setting to the sipCfgProxyAdr MIB object for th…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.11.1.1.1.12
sipCfgPortProxyType
This is the type for the address of the SIP proxy server for this line. This object
is only settable during config file download. It this object is used it will take
precedence over any setting to the sipCfgProxyAdr M…
Enumerationr/w
Enumerated Values:
0ipv4
1dns
 .1.3.6.1.4.1.4115.11.1.1.1.13
sipCfgPortFeatureSettings
This object allows for MSO control of certain feature states via the config file.
If the settings for these features do not need to be set a certain way at
powerup, then this MIB should not be used. This MIB is not set…
Bitsr/w
Enumerated Values:
0defaultFeatures
1callerIdPermanentDisable
2anonCallRejectionEnable
3callWaitingPermanentDisable
4threeWayCallingDisable
5callerIdReceiptDisable
6callTransferEnable
 .1.3.6.1.4.1.4115.11.1.1.1.14
sipCfgPortT38Mode
This object is used to enable T38 mode for the line. By default T38 is disabled. To
enable it this value must be set to t38Loose or t38Strict. In t38Loose mode T38
negotiation will be attempted without prior knowledge…
Enumerationr/w
Enumerated Values:
1t38Off
2t38Loose
3t38Strict
 .1.3.6.1.4.1.4115.11.1.1.1.15
sipCfgPortFaxOnlyTimeout
This object is used to define a line as a fax only line. The default value of the
object is zero which means no timeout. When the object is set to a non-zero value
a timer is started after receiving the far ends SDP. …
Integer32r/w
Constraints:
range: 0-600
 .1.3.6.1.4.1.4115.11.1.1.1.16
sipCfgPortMaxT38HSRedLevel
This MIB is used to set the maximum high-speed redundancy level that will be used for
T.38 fax-relay in both the send and receive direction. High speed redundancy refers
to the number of additional older data packets…
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.4115.11.1.1.1.17
sipCfgPortCallByeDelay
This MIB Object specifies the Bye Delay in seconds per line.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4115.11.1.1.1.18
sipCfgPortMWIClear
This MIB is used to clear or set the current MWI. If the MIB is set to FALSE, then the MTA will turn on both MWI tone
and visual MWI indicator. If the MIB is set to TRUE, the tone and indicator will be cleared. The Get…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.11.1.1.1.19
sipCfgPortMWIVisualEnable
This MIB Object enables or disables the visual indication for the MWI NOTIFY.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.11.1.1.1.20
sipCfgPortMWIToneEnable
This MIB Object enables or disables the stutter tone indication for the MWI NOTIFY.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.11.1.1.1.21
sipCfgPortWarmOrHotlineEnable
This MIB Object enables or disables the Warmline or Hotline feature.
sipCfgPortWarmOrHotlineNumber needs to be set to fully enable this feature.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.11.1.1.1.22
sipCfgPortDndRingReminderEnable
This MIB Object enables or disables the ringsplash when an IVNITE is rejected by DND.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.11.1.1.1.23
sipCfgPortLoopReversal
This MIB Object enables or disables the loop polarity/reversal.When enabled(1),it indicates
that if the line is calling party, it will reverse the polarity when the far end answers, then
set back to normal when the ca…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.11.1.1.1.24
sipCfgPortCurrentProxy
This is the address of the SIP proxy currently used by the line.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.11.1.1.1.25
sipCfgPortPrimaryProxy
This is the primary proxy of the line. Only used in PC2.0 load.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.11.1.1.1.26
sipCfgPortCallWaitingPermanentDisable
This Mib is used for setting the persistent state of Call waiting.There are three value for setting: ignore, forceDisable, forceEnable.
If this MIB is set to ignore(0),call waiting state will be based on the setting of …
Enumerationr/w
Enumerated Values:
0ignore
1forceDisable
2forceEnable
 .1.3.6.1.4.1.4115.11.1.1.1.27
sipCfgPortCallerIDCallWaitingPermanentDisable
This Mib is used for setting the persistent state of caller ID display in a call waiting scenario.
There are three value for setting: ignore, forceDisable, forceEnable.
If this MIB is set to ignore(0), the Caller ID dis…
Enumerationr/w
Enumerated Values:
0ignore
1forceDisable
2forceEnable
 .1.3.6.1.4.1.4115.11.1.1.1.28

sipCfgDialFeatTable

table
.1.3.6.1.4.1.4115.11.1.11 · 1 row entry · 6 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk sipCfgDialFeatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-SIP-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-SIP-MIB::sipCfgDialFeatTable' 
This table is used to define the SIP configurable data on a per port basis.
sipCfgDialFeatEntry row .1.3.6.1.4.1.4115.11.1.11.1
An entry in the Configuration Feature table.
Indexes
Column Syntax OID
sipCfgDialFeatNumber
The unique value which identifies the feature.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.11.1.11.1.1
sipCfgDialFeatName
Table of supported calling features.
Enumerationr/w
Enumerated Values:
1anonCallReject
2anonCallRejectDisable
30callForwardBusy
31callForwardBusyDisable
32callForwardUncond
33callForwardUncondDisable
34callForwardNoAnswer
35callForwardNoAnswerDisable
36warmline
37warmlineDisable
50callReturn
60callReDial
61callHold
62repeatDialingEnable
63repeatDialingCancel
70callWaitTempDisable
71callWaitPermDisableToggle
72callWaitPermanentDisable
73callWaitPermanentEnable
90callerIDPermBlockToggle
91callerIDTempEnable
92callerIDTempBlock
 .1.3.6.1.4.1.4115.11.1.11.1.2
sipCfgDialFeatCode
String comma separated to specify up to three codes for a particular feature.
Example:

*70,1170,*71

This would specify that either *70, 1170 or *71 would activate the current
feature. A ma…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.11.1.11.1.3
sipCfgDialFeatTone
This allows specification of a tone to be applied when a feature is entered.
Typically stutter tone is used to acknowledge a feature was entered but this can
be redefined here.
Enumerationr/w
Enumerated Values:
1stutterTone
2dialTone
 .1.3.6.1.4.1.4115.11.1.11.1.4
sipCfgDialFeatActive
This allows a particular feature to be enabled or disabled based on a particular line number.

Example a setting of 0x0003 would have this feature enabled for line 1 and line 2.
Bitsr/w
Enumerated Values:
0line32
1line31
2line30
3line29
4line28
5line27
6line26
7line25
8line24
9line23
10line22
11line21
12line20
13line19
14line18
15line17
16line16
17line15
18line14
19line13
20line12
21line11
22line10
23line09
24line08
25line07
26line06
27line05
28line04
29line03
30line02
31line01
 .1.3.6.1.4.1.4115.11.1.11.1.5
sipCfgDialFeatMode
This allows a particular feature to be enabled in different modes of dialing. The default is
a setting of 0x1 where the feature is active in a initial dialing (normal)
Bitsr/w
Enumerated Values:
0unused0
1unused1
2unused2
3unused3
4unused4
5unused5
6busy
7initialDialing
 .1.3.6.1.4.1.4115.11.1.11.1.6

sipCfgDialProxyTable

table
.1.3.6.1.4.1.4115.11.1.37 · 1 row entry · 7 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk sipCfgDialProxyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-SIP-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-SIP-MIB::sipCfgDialProxyTable' 
This table replaces an older MIB, sipCfgDialProxyMap, and defines the dial features
that are handled by the proxy.
sipCfgDialProxyEntry row .1.3.6.1.4.1.4115.11.1.37.1
An entry in the Configuration Feature table.
Indexes
Column Syntax OID
sipCfgDialProxyNumber
The unique value which identifies the feature.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.11.1.37.1.1
sipCfgDialProxyCode
The dial code that activates this feature. For example, *70
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.11.1.37.1.2
sipCfgDialProxyTone
This allows specification of a tone to be applied when a feature is entered.
Typically stutter tone is used to acknowledge a feature was entered but this can
be redefined here.
Enumerationr/w
Enumerated Values:
1stutterTone
2dialTone
 .1.3.6.1.4.1.4115.11.1.37.1.3
sipCfgDialProxyActive
This allows a particular feature to be enabled or disabled based on a particular line number.

Example a setting of 0x0003 would have this feature enabled for line 1 and line 2.
Bitsr/w
Enumerated Values:
0line32
1line31
2line30
3line29
4line28
5line27
6line26
7line25
8line24
9line23
10line22
11line21
12line20
13line19
14line18
15line17
16line16
17line15
18line14
19line13
20line12
21line11
22line10
23line09
24line08
25line07
26line06
27line05
28line04
29line03
30line02
31line01
 .1.3.6.1.4.1.4115.11.1.37.1.4
sipCfgDialProxyMessageType
For most proxy dial features, an INVITE message is sent to the proxy.
In special cases, a REFER message should be sent.
Enumerationr/w
Enumerated Values:
1invite
2refer
 .1.3.6.1.4.1.4115.11.1.37.1.5
sipCfgDialProxyMethod
Used to configure the method that the VSC is passed up to the proxy.
In the 'default' method the VSC is prepended to the dialstring and sent to
the proxy. In the 'PC20' method the VSC is sent as the host of the SIP URI…
Enumerationr/w
Enumerated Values:
0default
1pc20
 .1.3.6.1.4.1.4115.11.1.37.1.6
sipCfgDialProxyMethodDelimiter
Used to define the delimiter between the VSC and the number in the SIP INVITE message.
If this mib is not set, a '.' will be used as the delimiter.
The max length of delimiter is 4.

This mib is valid only…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.11.1.37.1.7

sipStatusPortTable

table
.1.3.6.1.4.1.4115.11.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk sipStatusPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-SIP-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-SIP-MIB::sipStatusPortTable' 
This table is used to get SIP status data on a per port basis.
sipStatusPortEntry row .1.3.6.1.4.1.4115.11.2.1.1
An entry in the Status Port table.
Indexes
Column Syntax OID
sipStatusPortPortNumber
The unique value which identifies the port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.11.2.1.1.1
sipStatusAlarms
This MIB object reports the current SIP alarm state for each line.

generalErrorAlrm - set when an error occurs that doesn't have an
RFC supported error condition

networkErrorAlrm - set whe…
Bits
Enumerated Values:
0unused
1generalErrorAlrm
2networkErrorAlrm
3callLegSentAuth
4regClientSentAuthReq
5authFailAlrm
6registrarLocAlrm
7proxyLocAlrm
 .1.3.6.1.4.1.4115.11.2.1.1.2
sipStatusPortMWISubscribed
This MIB indicates MWI is subscribed or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.11.2.1.1.3