ARRIS-QAM-DETECTION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
5

arrisQamDetectionConfigFrequencyTable

table
.1.3.6.1.4.1.4115.1.3.12.1.1.2 · 1 row entry · 2 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisQamDetectionConfigFrequencyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-QAM-DETECTION-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-QAM-DETECTION-MIB::arrisQamDetectionConfigFrequencyTable' 
This table contains the MIB table required to configure the
QAM Detection Frequencies under test.
arrisQamDetectionConfigFrequencyEntry row .1.3.6.1.4.1.4115.1.3.12.1.1.2.1
This table contains the MIB table required to configure the
QAM Detection Frequencies under test.
Indexes
Column Syntax OID
arrisQamDetectionConfigFrequencyIndex
Index used to order the arrisQamDetectionConfigFrequencyTable entries.
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.4115.1.3.12.1.1.2.1.1
arrisQamDetectionConfigFrequency
This object shows the frequency under test. Value can be set to
91000000 Hz - 999000000 Hz. Setting value to 0 will disable this
frequency.
hertzInteger32r/w
Constraints:
range: 91000000-999000000
 .1.3.6.1.4.1.4115.1.3.12.1.1.2.1.2

arrisQamDetectionResultsTable

table
.1.3.6.1.4.1.4115.1.3.12.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisQamDetectionResultsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-QAM-DETECTION-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-QAM-DETECTION-MIB::arrisQamDetectionResultsTable' 
This table contains all the MIB variables required for the
QAM Detection Results.
arrisQamDetectionResultsEntry row .1.3.6.1.4.1.4115.1.3.12.1.2.1
This table contains all the MIB variables required for the
QAM Detection Results.
Indexes
Column Syntax OID
arrisQamDetectionResultsIndex
Index used to order the arrisQamDetectionResultsTable entries.
Integer32
Constraints:
range: 1-30
 .1.3.6.1.4.1.4115.1.3.12.1.2.1.1
arrisQamDetectionResultsFreq
This object shows a frequency where a QAM signal was detected.
hertzInteger32
Constraints:
range: 91000000-999000000
 .1.3.6.1.4.1.4115.1.3.12.1.2.1.2
arrisQamDetectionResultsTimestamp
This object shows the time and date of when a QAM signal was detected.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.1.3.12.1.2.1.3