ARRIS-CER-VIDEO-VPME-MIB Table View

This table specifies the VPME instance details.
It specifies a collection of encrypted services which are in
the same Security Domain and are therefore share a common CW

cerVideoVpmeSdEntry row .0.7.1.1

Information about a single table entry.

Indexes

cerVideoVpmeSdIndex

Column	Syntax	OID
cerVideoVpmeSdIndex The security-domain instance number uniquely identifies the VPME instance for the E6000.	Integer32r/w Constraints: range: 1-7	.0.7.1.1.1
cerVideoVpmeSdDacId DACID uniquely identifies the VPME instance for this SCS. The default value is 0.	Integer32r/w Constraints: range: 0-65535	.0.7.1.1.2
cerVideoVpmeSdAdminState Set state of VPME instance for this security-domain. Setting the state to down will result in all sevices associated with this instance to be delivered in the clear	CADANT-TCAdminStater/w Type Values: 1 up 2 down	.0.7.1.1.3
cerVideoVpmeSdRowStatus Show state of VPME instance	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.0.7.1.1.4
cerVideoVpmeSdEqmIpAddress IP address of the host of the EQM.	CADANT-TCInetAddressIPv4or6r/w Type Constraints: range: 0 range: 4 range: 8 range: 16 range: 20	.0.7.1.1.5
cerVideoVpmeSdEqmTcpPort TCP port of the EQM.	Integer32r/w Constraints: range: 0-65535	.0.7.1.1.6
cerVideoVpmeSdSourceInterfaceIpv4IfIndex The ifIndex of the interface from which all IPv4 packets are sourced. A value of 0 indicates no source interface override.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.0.7.1.1.7
cerVideoVpmeSdSourceInterfaceIpv4Address The IP address of the interface from which all IPv4 packets are sourced. A value of 0 indicates no source interface override.	CADANT-TCInetAddressIPv4or6r/w Type Constraints: range: 0 range: 4 range: 8 range: 16 range: 20	.0.7.1.1.8

This read-only table is used to monitor the current state of the
VPME instance. Note there is a 1:1 mapping between an VPME instance 
and an security domain.

cerVideoVpmeSdStatsEntry row .0.7.2.1

Information about a single table entry.

Indexes

cerVideoVpmeSdStatsIndex

Column	Syntax	OID
cerVideoVpmeSdStatsIndex The security-domain instance number uniquely identifies the VPME instance for the E6000.	Integer32 Constraints: range: 1-7	.0.7.2.1.1
cerVideoVpmeSdStatsEqmWakeup Defines the number of seconds prior to a CW-Provision, that the EQM connection will be established. The default is 0 which means that the EQM connection remains permanently established.	Integer32 Constraints: range: 0-65535	.0.7.2.1.2
cerVideoVpmeSdStatsEcmDuration Defines defines the lifetime of the control word and ECM, in seconds. This value is signaled by the EQM and the E6000 must provision a new CW after this period of time.	Integer32 Constraints: range: 0-65535	.0.7.2.1.3
cerVideoVpmeSdStatsEcmTimeout Defines the countdown to the next CW provision event, in seconds.	Integer32 Constraints: range: 0-65535	.0.7.2.1.4
cerVideoVpmeSdStatsEcmRepPeriod Defines the rate at which ECM datagrams must be generated on the egress video stream for each encrypted service, in milliseconds.	Integer32 Constraints: range: 0-65535	.0.7.2.1.5
cerVideoVpmeSdStatsTimeInOperState Timestamp when the service became operational.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.0.7.2.1.6
cerVideoVpmeSdStatsEcmProvSuccCnt Count of the total number of successful ECM provision interactions with the EQM	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.7.2.1.7
cerVideoVpmeSdStatsEcmProvFailCnt Count of the total number of failed ECM provision interactions with the EQM.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.7.2.1.8
cerVideoVpmeSdStatsTimeoutCnt Count of the total number of EQM response timeouts which have occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.7.2.1.9
cerVideoVpmeSdStatsErrorCnt Count of the total number of Error messages from the EQM.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.7.2.1.10
cerVideoVpmeSdStatsEqmFlapCnt Count of the total number of connection failures to the EQM. This count does not include enable/disable of the VPME instance.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.7.2.1.11
cerVideoVpmeSdStatsVpmeOperState Indicates the operational state of the VPME instance.	Enumeration Enumerated Values: 1 is 2 oos	.0.7.2.1.12
cerVideoVpmeSdStatsSzIndex The instance of the streaming zone associated with the VPME instance. 0 is reserved for the unassigned case.	Integer32 Constraints: range: 0-7	.0.7.2.1.13

This is a table of configured Service Encryption rules.

cerVideoVpmeRuleEntry row .0.7.3.1

Information about a single table entry.

Indexes

cerVideoVpmeRuleDacId cerVideoVpmeRuleTransportId cerVideoVpmeRuleServiceId

Column	Syntax	OID
cerVideoVpmeRuleDacId DACID uniquely identifies the VPME instance to which this service encryption rule is bound to.	Integer32 Constraints: range: 0-65535	.0.7.3.1.1
cerVideoVpmeRuleTransportId Transport ID. A 0 value is interpreted as a wildcard all match.	Integer32 Constraints: range: 0-65536	.0.7.3.1.2
cerVideoVpmeRuleServiceId Service ID. A 0 value is interpreted as a wildcard all match.	Integer32r/w Constraints: range: 0-65536	.0.7.3.1.3
cerVideoVpmeRuleExclude If this variable is set to TRUE then the service(s) matched by this rule are excluded from scrambling.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.0.7.3.1.4
cerVideoVpmeRuleRowStatus The values that control the creation/deletion of Service Encryption Rules.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.0.7.3.1.5

This read-only table is used to monitor the current set of
encrypted active services.

cerVideoVpmeProgEntry row .0.7.4.1

Information about a single table entry.

Indexes

cerVideoVpmeProgDacId cerVideoVpmeProgQamIfIndex cerVideoVpmeProgServiceId

Column	Syntax	OID
cerVideoVpmeProgDacId DACID uniquely identifies the VPME instance which is encrypting this service	Integer32 Constraints: range: 1-65535	.0.7.4.1.1
cerVideoVpmeProgQamIfIndex The ifIndex of the QAM channel associated with this service.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.0.7.4.1.2
cerVideoVpmeProgServiceId Service ID.	Integer32 Constraints: range: 1-65536	.0.7.4.1.3
cerVideoVpmeProgTransportId Transport ID.	Integer32 Constraints: range: 1-65536	.0.7.4.1.4
cerVideoVpmeProgEcmPid Identifies the PID on which the ECM datagrams for this service are delivered	ARRIS-CER-VIDEO-MIBCerPID Type Constraints: range: 0..8191	.0.7.4.1.5
cerVideoVpmeProgDeliveryState The current encryption delivery state of the service.	CerVideoVpmeProgDeliveryState Type Values: 0 clear 1 encrypted 2 blocked	.0.7.4.1.6
cerVideoVpmeProgDeliveryStateTime The timestamp indicating when the service entered the current delivery state.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.0.7.4.1.7
cerVideoVpmeProgRuleTransportId The configured transportID of the encryption rule which this service is matched against.	Integer32 Constraints: range: 1-65535	.0.7.4.1.8
cerVideoVpmeProgRuleServiceId The configured serviceID of the encryption rule which this service is matched against.	Integer32 Constraints: range: 1-65535	.0.7.4.1.9