ARRIS-C3-SUBINT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
36

dcxSubIntTable

table
.1.3.6.1.4.1.4115.1.4.3.11.1.1.1 · 1 row entry · 17 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk dcxSubIntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-C3-SUBINT-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-C3-SUBINT-MIB::dcxSubIntTable' 
Arris C3 Proprietary Sub-Interface table
dcxSubIntEntry row .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1
A row in the dcxSubIntTable. An entry in this table exists
for each Sub-Interface configured on the CMTS
Indexes
Column Syntax OID
dcxSubIntSlotIndex
the slot index of the card in the Cmts
Unsigned32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.1
dcxSubIntPortIndex
the port index of the port on a card
Unsigned32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.2
dcxSubIntSubIntIndex
the sub-interface index of the sub-inteface on a port
Unsigned32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.3
dcxSubIntBridgeGroupNum
bridge-group number which the sub-interface is configured on,
0 is reserved, 255 indicates not configured in a bridge-group
Unsigned32r/w
Constraints:
range: 0-254
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.4
dcxSubIntManagementAccess
is management of Cmts allowed through sub-interface
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.5
dcxSubIntPrimaryIpAddress
primary ip address of sub-interface
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.6
dcxSubIntPrimaryIpMask
primary ip subnet mask of sub-interface
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.7
dcxSubIntPrimaryIpBCastAddress
primary ip subnet broadcast address of sub-interface
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.8
dcxSubIntRelayEnabled
are DHCP packets relayed on this sub-interface
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.9
dcxSubIntRelayInformationOption
is the information options added to the DHCP packets relayed on this
sub-interface. Has no effect if dcxSubIntRelayEnabled is False on the
sub-interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.10
dcxSubIntGiaddrPolicy
which giaddr is used for DHCP packets relayed from CPEs on this sub-interface,
off(0) is returned when dcxSubIntRelayEnabled is False,
primary(1) indicates that the primary address on sub-interface is used,
policy(2) i…
Enumerationr/w
Enumerated Values:
0off
1primary
2policy
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.11
dcxSubIntInboundAclIndex
which Access Control List is this sub-interface bound to for inbound packets, a value
of zero indicates no ACL binding for inbound packets on the sub-interface
Unsigned32r/w
Constraints:
range: 0-2999
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.12
dcxSubIntOutgoingAclIndex
which Access Control List is this sub-interface bound to for outgoing packets, a value
of zero indicates no ACL binding for inbound packets on the sub-interface
Unsigned32r/w
Constraints:
range: 0-2999
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.13
dcxSubIntUnboundTag
sub-interface encapsulate Vlan Tag value, 0 indicates no tag
Unsigned32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.14
dcxSubIntUnboundTagIsNative
sub-interface will not generate packets with tags when native
is configured
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.15
dcxSubIntOperational
states if the subinterface is operational or not, factors are dcxSubIntStatus and the
physical ports oper and admin status
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.16
dcxSubIntStatus
Controls and reflects the status of rows in this table.
Rows in this table may be created by either the create-and-go or
create-and-wait paradigms. There is no restriction on changing
values in a row of this table w…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.17

dcxSubIntIpTable

table
.1.3.6.1.4.1.4115.1.4.3.11.1.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk dcxSubIntIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-C3-SUBINT-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-C3-SUBINT-MIB::dcxSubIntIpTable' 
Arris C3 Proprietary Sub-Interface table
dcxSubIntIpEntry row .1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1
A row in the dcxSubIntIpTable. An entry in this table exists for
each IP address configured on the Sub-Interface identified by
the dcxSubIntNumber
Indexes
Column Syntax OID
dcxSubIntIpIndex
sub-interface secondary IP address index
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1.1
dcxSubIntIpAddress
a secondary ip address of sub-interface
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1.2
dcxSubIntIpMask
a secondary ip subnet mask of sub-interface
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1.3
dcxSubIntIpBCastAddress
a secondary ip subnet broadcast address
of sub-interface
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1.4
dcxSubIntIpAddressType
primary(1): address is the primary address on
the sub-interface, only one allowed
secondary(2):address is one of the secondary
addresses configured on the sub-interface
Enumerationr/w
Enumerated Values:
1primary
2secondary
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1.5
dcxSubIntIpStatus
Controls and reflects the status of rows in this table.
Rows in this table may be created by the create-and-go
paradigm. There is no restriction on changing values
in a row of this table while the row is active.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1.6

dcxSubIntCableHelperTable

table
.1.3.6.1.4.1.4115.1.4.3.11.1.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk dcxSubIntCableHelperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-C3-SUBINT-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-C3-SUBINT-MIB::dcxSubIntCableHelperTable' 
Arris C3 Proprietary Sub-Interface Cable Helper Table
dcxSubIntCableHelperEntry row .1.3.6.1.4.1.4115.1.4.3.11.1.1.3.1
A row in the dcxSubIntCableHelperTable.
An entry in this table exists for each cable helper
IP address configured on the Sub-Interface which is
identified using the dcxSubIntNumber
Indexes
Column Syntax OID
dcxSubIntCableHelperType
category of cable helper address.
cm(1) these helper addresses are only used when relaying
DHCP packets originating from a CM.
cpe(2) these helper addresses are only used when relaying
DHCP packets originating from a CP…
Enumeration
Enumerated Values:
0default
1cm
2cpe
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.3.1.1
dcxSubIntCableHelperIndex
sub-interface cable helper index
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.3.1.2
dcxSubIntCableHelperIpAddress
cable helper ip address configured on sub-interface
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.3.1.3
dcxSubIntCableHelperStatus
Controls and reflects the status of rows in this table.
Rows in this table may be created by the create-and-go
paradigm. Entries in this table can only be created or
deleted, no modification is possible.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.3.1.4

dcxSubIntVlanTagTable

table
.1.3.6.1.4.1.4115.1.4.3.11.1.1.4 · 1 row entry · 9 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk dcxSubIntVlanTagTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-C3-SUBINT-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-C3-SUBINT-MIB::dcxSubIntVlanTagTable' 
Arris C3 Proprietary Sub-Interface Vlan Tag Table
dcxSubIntVlanTagEntry row .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1
A row in the dcxSubIntVlanTagTable.
An entry in this table exists for each Vlan tag
that is configured on the sub-interface (which is
identified using the dcxSubIntNumber)
Indexes
Column Syntax OID
dcxSubIntVlanTag
sub-interface Vlan Tag value, 0 indicates no tag
Unsigned32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.1
dcxSubIntVlanNative
sub-interface will not generate packets with tags when native
is configured
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.2
dcxSubIntVlanIsBound
is sub-interface tag bound to another sub-interface's VLAN tag
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.3
dcxSubIntBoundVlanSlotIndex
slot index of VLAN tag that dcxSubIntVlanTag is bound to
-1 when VLAN not bound to another VLAN tag on another
sub-interface
Integer32r/w
Constraints:
range: -1-4094
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.4
dcxSubIntBoundVlanPortIndex
port index of VLAN tag that dcxSubIntVlanTag is bound to
-1 returned when VLAN not bound to another VLAN tag on another
sub-interface
Integer32r/w
Constraints:
range: -1-4094
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.5
dcxSubIntBoundVlanSubIntIndex
sub interface index of VLAN tag that dcxSubIntVlanTag is bound to
-1 returned when VLAN not bound to another VLAN tag on another
sub-interface
Integer32r/w
Constraints:
range: -1-4094
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.6
dcxSubIntBoundVlanTag
sub-interface Vlan Tag value, 0 indicates no tag
Unsigned32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.7
dcxSubIntBoundVlanNative
bound sub-interface will not generate packets with tags when native
is configured
FLASE will be returned when VLAN not bound to another VLAN tag on another
sub-interface
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.8
dcxSubIntVlanTagStatus
Controls and reflects the status of rows in this table.
Rows in this table may be created by the create-and-go
paradigm. There is no restriction on changing values
in a row of this table while the row is active.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.9