ARRIS-C3-MAC-MIB Table View

Additional columns for docsIfCmtsMacTable.
An entry in this table exists for each ifEntry with an 
ifType of docsCableMaclayer(127).

dcxMACCmtsMacEntry row .1.3.6.1.4.1.4115.1.4.3.6.1.1.1

dcxMACCmtsMacEntry

Indexes

IF-MIBifIndex

Column	Syntax	OID
dcxMACCmtsMacMode Indicates the mode in which the MAC is operating. A read to this value may return any of the modes defined by DocsisMacType. Only the modes docsis, euroDocsis and mixed may be written. When set to docsis or euroDocsis, …	DocsisMacTyper/w Type Values: 1 docsis 2 euroDocsis 3 mixed 4 custom	.1.3.6.1.4.1.4115.1.4.3.6.1.1.1.1
dcxMACCableAdvanceType Cable Map Advance Type - 0 for Static, 1 for Dynamic.	Enumerationr/w Enumerated Values: 0 static 1 dynamic	.1.3.6.1.4.1.4115.1.4.3.6.1.1.1.2
dcxMACPlantLength Cable Plant Length (1-way) in kilometers.	kilometersUnsigned32r/w Constraints: range: 0-161	.1.3.6.1.4.1.4115.1.4.3.6.1.1.1.3
dcxMACFlapAgingTime Cable Flap List Aging Time in seconds.	secondsUnsigned32r/w Constraints: range: 0-864000	.1.3.6.1.4.1.4115.1.4.3.6.1.1.1.4
dcxMACFlapInsertTime Cable Flap List Insertion Time threshold in seconds.	secondsUnsigned32r/w Constraints: range: 0-86400	.1.3.6.1.4.1.4115.1.4.3.6.1.1.1.5
dcxMACFlapMissThresh Cable Flap List Miss Threshold in misses.	missesUnsigned32r/w Constraints: range: 0-12	.1.3.6.1.4.1.4115.1.4.3.6.1.1.1.6
dcxMACFlapListSize Cable Flap List Maximum Number of Entries.	entriesUnsigned32r/w Constraints: range: 0-6000	.1.3.6.1.4.1.4115.1.4.3.6.1.1.1.8
dcxMACCmOfflineAgingTime Cable modem offline aging time in seconds. Minimum value is 1 hour. Maximum time before aging a modem is 10 days. Default value is 24 hours.	secondsUnsigned32r/w Constraints: range: 3600-864000	.1.3.6.1.4.1.4115.1.4.3.6.1.1.1.9
dcxMACUccMaxFailedAttempts Maximum number of consecutive failed channel change attempts that a modem is allowed before the CMTS decides to no longer use the modem for load balancing purposes. If a modem successfully completes a channel change bef…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4115.1.4.3.6.1.1.1.10

Additional columns for docsIfDownstreamChannelTable.
An entry in this table exists for each ifEntry with an 
ifType of docsCableDownstream(128).

dcxMACDownstreamChannelEntry row .1.3.6.1.4.1.4115.1.4.3.6.1.2.1

dcxMACDownstreamChannelEntry

Indexes

IF-MIBifIndex

Column	Syntax	OID
dcxMACDownChannelMacMode Configures the downstream to DOCSIS or EuroDOCSIS. When dcxMACDownChannelWirelessMode is disabled, changes to this will impact the downstream annex type, modulation, symbol rate and interleaver. When wireless mode is en…	DocsisMacTyper/w Type Values: 1 docsis 2 euroDocsis 3 mixed 4 custom	.1.3.6.1.4.1.4115.1.4.3.6.1.2.1.1
dcxMACDownChannelUpconverter Controls whether or not the internal upconverter is used. If set to internal, the downstream IF frequency will operate in read-only mode and will be configured internally by the CMTS based on the downstream channel conf…	Enumerationr/w Enumerated Values: 1 internal 2 external	.1.3.6.1.4.1.4115.1.4.3.6.1.2.1.2
dcxMACDownChannelIfFrequency The IF frequency output by the modulator for this channel.	hertzInteger32r/w Constraints: range: 10000000-60000000	.1.3.6.1.4.1.4115.1.4.3.6.1.2.1.3
dcxMACDownChannelWirelessMode Enabling this mode allows non-standard downstream modulations and symbol rates to be configured which are suitable when using the CMTS in a wireless application. Changes to dcxMACDownChannelMacMode when wireless mode is…	Enumerationr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.4115.1.4.3.6.1.2.1.4
dcxMACDownChannelSymbolRate Sets the downstream symbol rate.	Integer32r/w Constraints: range: 1250000-6952000	.1.3.6.1.4.1.4115.1.4.3.6.1.2.1.5
dcxMACDownChannelAlpha The percentage of excess bandwidth for the channel.	percentSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.2.1.6

Additional columns for docsIfUpstreamChannelTable.
An entry in this table exists for each ifEntry with an 
ifType of docsCableUpstream(129).

dcxMACUpstreamChannelEntry row .1.3.6.1.4.1.4115.1.4.3.6.1.3.1

dcxMACUpstreamChannelEntry

Indexes

IF-MIBifIndex

Column	Syntax	OID
dcxMACUpChannelMacMode Indicates the mode in which this upstream is operating. A read or write to this may consist only of the values docsis or euroDocsis.	DocsisMacTyper/w Type Values: 1 docsis 2 euroDocsis 3 mixed 4 custom	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.1
dcxMACUpChannelAmpAttenuation The amplifier attenuation level for this logical channel.	DOCS-IF-MIBTenthdBmVr/w	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.2
dcxMACUpChannelIngressCancellation Sets the ingress noise cancellation mode for this logical channel. Not all modes may be valid for a given logical channel configuration or hardware.	Enumerationr/w Enumerated Values: 1 disabled 2 tdmaOnly 3 scdmaSec 4 scdmaInc1 5 scdmaInc2	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.3
dcxMACUpChannelGroupId The group ID for this logical channel used to associate it with other upsteams on the same physical network. The group ID is an index into the dcxMACUpstreamGroupTable which defines common parameters for grouped upst…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.4
dcxMACUpChannelShortPollInterval The short interval for initial unicast maintanance on this logical channel.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.5
dcxMACUpChannelPeriodicPollInterval The periodic station maintanance interval on this logical channel.	Integer32r/w Constraints: range: 100-10000	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.6
dcxMACUpChannelInputPowerMode The receiver input power mode for this logical channel. In fixed mode the input power to the demodulator will remain fixed across symbol rate changes. In automatic mode the demodulator may vary the input power for opt…	Enumerationr/w Enumerated Values: 1 fixed 2 automatic	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.7
dcxMACUpChannelPower The nominal receiver input power for this logical channel.	DOCS-IF-MIBTenthdBmVr/w	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.8
dcxMACUpChannelPlantLength The cable length in km to the most distant CM on this logical upstream.	Unsigned32r/w Constraints: range: 1-320	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.9
dcxMACUpChannelMaxCmMapProcTime The maximum time in microseconds allowed for modems on this logical channel to process the Upstream Bandwidth Allocation MAP.	Unsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.10
dcxMACUpChannelConcatenation Enables or disables the use of packet concatenation by Cable Modems on this logical channel.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.11
dcxMACUpChannelSpMgtTriggerIndex An index into spectral management trigger table, identical to dcxMACSpMgtTriggerIndex in that table. All entries with the same value of dcxMACSpMgtTriggerIndex form a trigger group all assigned to the same logical up…	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.12
dcxMACUpChannelLowPowerOffset The maximum power offset of a burst below the nominal input power to the CMTS that will not cause a RNG-RSP with status continue. Valid range is from -10 dBmV to -1 dBmV in 1 dB increments.	Integer32r/w Constraints: range: -100--10	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.13
dcxMACUpChannelHighPowerOffset The maximum power offset of a burst above the nominal input power to the CMTS that will not cause a RNG-RSP with status continue. Valid range is from +1 dBmV to +10 dBmV in 1 dB increments.	Integer32r/w Constraints: range: 10-100	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.14
dcxMACUpChannelLogSnrAveTimeconstant The averaging timeconstant used to calculate the per-logical channel MIB variable docsIfSigQSignalNoise. The averaging uses a logarithmic scale, so that the actual timeconstant used is 2^X, where X is the value configu…	Unsigned32r/w Constraints: range: 0-10	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.15
dcxMACUpChannelImpulseMitigation Enables or disables impulse noise mitigation for this logical channel.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.16
dcxMACUpChannelRngPreambleGuardSymbols Number of guard symbols before the preamble pilot pattern for ranging bursts. Guard symbols may help the receiver to mitigate the effects of ISI and\or help with the detection of bursts with an early arrival time	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.17
dcxMACUpChannelNrngPreambleGuardSymbols Number of guard symbols before the preamble pilot pattern for non-ranging bursts. Guard symbols may help the receiver to mitigate the effects of ISI and\or help with the detection of bursts with an early arrival time	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.18
dcxMACUpChannelExtendedFrequencyErrorDetect Offsets in carrier frequency in the modem are corrected by the CMTS during ranging. Typically most if not all off the frequency error is removed in the initial ranging response with incremental changes removed during pe…	Enumerationr/w Enumerated Values: 0 none 1 initialRanging 2 periodicRanging 3 allRanging	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.19
dcxMACUpChannelLogC3SnrTimeconstant The averaging timeconstant used to calculate the per-logical channel MIB variable dcxMACUpChannelSignalNoise. The averaging uses a logarithmic scale, so that the actual timeconstant used is 2^X, where X is the value co…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.20
dcxMACUpChannelSignalNoise A measurement of the average signal/noise ratio for the logical upstream. The averaging may be controlled using the dcxMACUpChannelLogC3SnrTimeconstant variable	dBDOCS-IF-MIBTenthdB	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.21
dcxMACUpChannelSafeConfig If true, MIB SETs which would cause this logical channel to go offline will return a failure	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.22
dcxMACUpChannelInitialRangingDelay The number of extra microseconds to allow in a broadcast IUC3 grant to compensate for modems that perform initial ranging later than expected.	microsecondsUnsigned32r/w Constraints: range: 300-3000	.1.3.6.1.4.1.4115.1.4.3.6.1.3.1.23

Entries containing definitions for group IDs
that can be associated with an upstream channel.

dcxMACUpstreamGroupEntry row .1.3.6.1.4.1.4115.1.4.3.6.1.4.1

dcxMACUpstreamGroupEntry

Indexes

dcxMACUpstreamGroupId

Column	Syntax	OID
dcxMACUpstreamGroupId The ID for this group.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.4115.1.4.3.6.1.4.1.1
dcxMACUpstreamGroupName The name associated with this group	OctetStringr/w Constraints: range: 1-63	.1.3.6.1.4.1.4115.1.4.3.6.1.4.1.2
dcxMACUpstreamGroupLoadBalancing Configures upstream load balancing for the group. Options are: none, initialNumeric, periodic. If set to none, no load balancing will be performed. If set to initialNumeric, the CMTS may redirect modems to other active …	Enumerationr/w Enumerated Values: 1 none 2 initialNumeric 3 periodic	.1.3.6.1.4.1.4115.1.4.3.6.1.4.1.3
dcxMACUpstreamGroupFrequencyIndex An index into upstream frequency table, identical to dcxMACUpstreamFrequencyIndex in that table. All entries with the same value of dcxMACUpstreamFrequencyIndex form a spectral frequency group all assigned to the sam…	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.4115.1.4.3.6.1.4.1.4
dcxMACUpstreamGroupSpMgtTriggerIndex An index into spectral management trigger table, identical to dcxMACSpMgtTriggerIndex in that table. All entries with the same value of dcxMACSpMgtTriggerIndex form a trigger group all assigned to the same upstream g…	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.4115.1.4.3.6.1.4.1.5
dcxMACUpstreamGroupStatus Used to create rows in this table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4115.1.4.3.6.1.4.1.6

Describes the upstream spectrum available for use by one or more
upstream groups. Entries are grouped by dcxMACUpstreamFrequencyIndex,
with each group assigned to one or more upstream groups.

dcxMACUpstreamFrequencyEntry row .1.3.6.1.4.1.4115.1.4.3.6.1.5.1

Describes a single contiguous region of upstream spectrum, available for
use by one or more upstream spectral groups.

Indexes

dcxMACUpstreamFrequencyIndex dcxMACUpstreamFrequencyRegion

Column	Syntax	OID
dcxMACUpstreamFrequencyIndex An index into the upstream frequency table representing a group of spectral regions, all associated with the same upstream spectral group.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.4115.1.4.3.6.1.5.1.1
dcxMACUpstreamFrequencyRegion An index into the upstream frequency table which, when grouped with other frequency regions with the same frequency index fully describe the upstream frequency spectrum available for use by a given spectral group.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.4115.1.4.3.6.1.5.1.2
dcxMACUpstreamFrequencyStart The start frequency for this upstream spectral region.	hertzSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.5.1.3
dcxMACUpstreamFrequencyStop The stop frequency for this upstream spectral region.	hertzSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.5.1.4
dcxMACUpstreamFrequencyStatus Used to create entries in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4115.1.4.3.6.1.5.1.5

Describes the spectral management triggers assigned to one 
or more upstream groups or channels. Entries are grouped by 
dcxMACSpMgtTriggerIndex, with each group assigned to one or more 
upstream channels or groups.

dcxMACSpectralMgtTriggerEntry row .1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1

Describes a single spectral management trigger, available for
use by one or more upstream channels or spectral groups.

Indexes

dcxMACSpMgtTriggerIndex dcxMACSpMgtTriggerNumber

Column	Syntax	OID
dcxMACSpMgtTriggerIndex An index into the spectral managment trigger table representing a group of triggers, all assigned to the same upstream channel or spectral group.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.1
dcxMACSpMgtTriggerNumber An index into the spectral managment trigger table which, when grouped with other triggers with the same trigger index fully describe the spectral mangement triggers assigned to the same upstream channel or spectral gr…	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.2
dcxMACSpMgtTriggerType Identifies the trigger type represented by this entry.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.3
dcxMACSpMgtTriggerAction An index into the spectral management action table, identical to dcxMACSpMgtActionIndex in that table, identifying the action to take if this trigger is invoked. Returns 0 if there is no action associated with this trig…	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.4
dcxMACSpMgtTriggerParam1 Parameter dependent on trigger type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.5
dcxMACSpMgtTriggerParam2 Parameter dependent on trigger type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.6
dcxMACSpMgtTriggerParam3 Parameter dependent on trigger type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.7
dcxMACSpMgtTriggerParam4 Parameter dependent on trigger type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.8
dcxMACSpMgtTriggerParam5 Parameter dependent on trigger type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.9
dcxMACSpMgtTriggerParam6 Parameter dependent on trigger type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.10
dcxMACSpMgtTriggerParam7 Parameter dependent on trigger type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.11
dcxMACSpMgtTriggerParam8 Parameter dependent on trigger type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.12
dcxMACSpMgtTriggerStatus Used to create and control the status of entries in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.13

Describes the spectral management actions assigned to one 
or more spectral managment triggers.

dcxMACSpectralMgtActionEntry row .1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1

Describes a single spectral management action, assigned to
one or more spectral management triggers.

Indexes

dcxMACSpMgtActionIndex

Column	Syntax	OID
dcxMACSpMgtActionIndex An index into the spectral managment actions table used to assign actions to spectral management triggers.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.1
dcxMACSpMgtActionType Identifies the action type represented by this entry.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.2
dcxMACSpMgtActionParam1 Parameter dependent on action type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.3
dcxMACSpMgtActionParam2 Parameter dependent on action type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.4
dcxMACSpMgtActionParam3 Parameter dependent on action type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.5
dcxMACSpMgtActionParam4 Parameter dependent on action type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.6
dcxMACSpMgtActionParam5 Parameter dependent on action type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.7
dcxMACSpMgtActionParam6 Parameter dependent on action type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.8
dcxMACSpMgtActionParam7 Parameter dependent on action type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.9
dcxMACSpMgtActionParam8 Parameter dependent on action type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.10
dcxMACSpMgtActionStatus Used to create and control the status of entries in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.11

Set up shared secrets for this DOCSIS MAC Interface

dcxMACSharedSecretEntry row .1.3.6.1.4.1.4115.1.4.3.6.1.7.1

dcxMACSharedSecretEntry

Indexes

IF-MIBifIndex dcxMACSharedSecretId

Column	Syntax	OID
dcxMACSharedSecretId ID for the associated shared secret.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.4115.1.4.3.6.1.7.1.1
dcxMACSharedSecretStr This is the shared secret itself, which is considered write-only. It can be SET but when a GET operation is performed the value is not returned.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4115.1.4.3.6.1.7.1.2
dcxMACSharedSecretStatus Row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4115.1.4.3.6.1.7.1.3