ARICENT-fs6374-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
138

fs6374ServiceConfigTable

table
.1.3.6.1.4.1.29601.2.107.1.1 · 1 row entry · 17 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fs6374ServiceConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-fs6374-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-fs6374-MIB::fs6374ServiceConfigTable' 
This object specifies a table that holds the service configurations.
fs6374ServiceConfigEntry row .1.3.6.1.4.1.29601.2.107.1.1.1
This object specifies Service Config Entry.
Indexes
Column Syntax OID
fs6374ContextId
This object specifies the unique identifier to identifies the
virtual router context.Currently, the implementation supports
only a single virtual instance of the router.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.1.1.1.1
fs6374ServiceName
This object specifies the unique name of the LSP/PW Service.
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.29601.2.107.1.1.1.2
fs6374MplsPathType
This object specifies the Mpls type which could be Tunnel/LSP or PW.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.107.1.1.1.3
fs6374FwdTnlIdOrPwId
This object specifies the ID which could be Tunnel Id for
unidirectional in forward direction or PW Id based on Mpls type.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.1.1.1.4
fs6374RevTnlId
This object specifies the ID which is the Tunnel Id for
unidirectional in reverse direction.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.1.1.1.5
fs6374SrcIpAddr
This object specifies the originating IP Address of the
unidirectional Tunnel or PW.
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.29601.2.107.1.1.1.6
fs6374DestIpAddr
This object specifies the terminating IP Address of the
unidirectional Tunnel or PW.
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.29601.2.107.1.1.1.7
fs6374EncapType
This object specifies the header type.
Enumerationr/w
Enumerated Values:
1withGALHEADER
2withoutGALHEADER
 .1.3.6.1.4.1.29601.2.107.1.1.1.8
fs6374TrafficClass
This object specifies the traffic class.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.29601.2.107.1.1.1.9
fs6374RowStatus
This object specifies the status of service configuration row.

The writable columns in a row can be changed even if the row
is active but writable columns cannot be changed if either of
loss/delay/combi…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.107.1.1.1.10
fs6374DyadicMeasurement
This object specifies the Dyadic Measurement status as
enabled or disabled.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.29601.2.107.1.1.1.11
fs6374TSFNegotiation
This object specifies the Timestamp Format Negotiation status as
enabled or disabled.
This configuration is applicable only for Non-dyadic Two-way DM
and Combined LMDM and value should be configured at querier end.
W…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.107.1.1.1.12
fs6374TSNegotiatedFormat
This object specifies the Negotiated Time Stamp Format of the
querier. This negotiated format is applicable only for
Non-dyadic Two-way DM and Combined LMDM.
The negotiated timestamp format can be either
timeSta…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.1.1.1.13
fs6374DyadicProactiveRole
This object specifies the Dyadic Measurement Proactive Role
status as active or passive.
If configured as passive, dyadic will initiated only after
initiated from active on peer end.
If configured as active, dyadic w…
Enumerationr/w
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.29601.2.107.1.1.1.14
fs6374QueryTransmitRetryCount
This object specifies the maximum number of retries of queries by a session
when querier is not getting response from the responder.
This object is used for congestion control at querier for outgoing packets.
Unsigned32r/w
Constraints:
range: 3-100
 .1.3.6.1.4.1.29601.2.107.1.1.1.15
fs6374SessionIntervalQueryStatus
This object specifies the Session Interval Query status as
enabled or disabled. This is applicable only for sending SQI TLV.
Whereas for responding to SQI TLV this is not mandatory to be enabled.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.29601.2.107.1.1.1.16
fs6374MinReceptionIntervalInMilliseconds
This object specifies the minimum time interval between two query
packets at which the service is ready to receive the packets.
This object is used for congestion control and rate limit the incoming
queries at responde…
millisecondsUnsigned32r/w
Constraints:
range: 100-10000
 .1.3.6.1.4.1.29601.2.107.1.1.1.17

fs6374ParamsConfigTable

table
.1.3.6.1.4.1.29601.2.107.2.1 · 1 row entry · 22 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fs6374ParamsConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-fs6374-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-fs6374-MIB::fs6374ParamsConfigTable' 
This object specifies all the configurations related to LM and DM 
as per virtual context of the router.
fs6374ParamsConfigTableEntry row .1.3.6.1.4.1.29601.2.107.2.1.1
This object specifies per virtual context LM and DM configuration parameters.
An entry in this table is created when a virtual context
is created.
Indexes
Column Syntax OID
fs6374LMType
This object specifies the type of LM calculation.

oneway(1) Indicates that calculation of LM will be in one way.
twoway(2) Indicates that calculation of LM will be in two way.
This object cannot…
Enumerationr/w
Enumerated Values:
1oneway
2twoway
 .1.3.6.1.4.1.29601.2.107.2.1.1.1
fs6374LMMethod
This object specifies the mode in which LM feature will work.

direct(1) Indicates that the LM feature will work in
Direct Method.
inferred(2) Indicates that LM feature will work in …
Enumerationr/w
Enumerated Values:
1direct
2inferred
 .1.3.6.1.4.1.29601.2.107.2.1.1.2
fs6374LMMode
This object specifies the method of LM calculation.

onDemand(1) Indicates that calculation of LM will be
done based on user request.
proActive(2) Indicates that calculation of LM will be
…
Enumerationr/w
Enumerated Values:
1onDemand
2proActive
 .1.3.6.1.4.1.29601.2.107.2.1.1.3
fs6374LMNoOfMessages
This object specifies the number of queries to be sent in a session
when method for LM calculation is Ondemand.
This object cannot be modified when fs6374LMTransmitStatus
is `notReady`.
Unsigned32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.29601.2.107.2.1.1.4
fs6374LMTimeIntervalInMilliseconds
This object specifies the time interval between two query packets
for LM with the granularity of 10milliseconds.
This object cannot be modified when fs6374LMTransmitStatus
is `notReady`.
millisecondsUnsigned32r/w
Constraints:
range: 100-10000
 .1.3.6.1.4.1.29601.2.107.2.1.1.5
fs6374LMTimeStampFormat
This object specifies the preferred timestamp format
which will be used for LM.
The below specified timestamp formats are supported for
Loss Measurement but now, time stamp format NTP is not support.
timeStampForm…
FS6374TimeStampFormatr/w
Type Values:
0timeStampFormatNull
1timeStampFormatSequence
2timeStampFormatNTP
3timeStampFormatIEEE1588
 .1.3.6.1.4.1.29601.2.107.2.1.1.6
fs6374LMTransmitStatus
This object specifies the status of loss transmit.
Fs6374TransmitStatusr/w
Type Values:
1start
2stop
3ready
4notReady
 .1.3.6.1.4.1.29601.2.107.2.1.1.7
fs6374DMType
This object specifies the type of DM calculation.

oneway(1) Indicates that calculation of DM will be one-way.
twoway(2) Indicates that calculation of DM will be two-way.
This object cannot be …
Enumerationr/w
Enumerated Values:
1oneway
2twoway
 .1.3.6.1.4.1.29601.2.107.2.1.1.8
fs6374DMMode
This object specifies the method of DM calculation.

onDemand(1) Indicates that calculation of DM will be done
based on user request.
proActive(2) Indicates that calculation of DM will be done
…
Enumerationr/w
Enumerated Values:
1onDemand
2proActive
 .1.3.6.1.4.1.29601.2.107.2.1.1.9
fs6374DMTimeIntervalInMilliseconds
This object specifies the time interval between two query packets
for DM with the granularity of 10milliseconds.
This object cannot be modified when fs6374DMTransmitStatus
is `notReady`.
millisecondsUnsigned32r/w
Constraints:
range: 100-10000
 .1.3.6.1.4.1.29601.2.107.2.1.1.10
fs6374DMNoOfMessages
This object specifies the number of queries to be sent in a session
when method for LM calculation is Ondemand.
This object cannot be modified when fs6374DMTransmitStatus
is `notReady`.
Unsigned32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.29601.2.107.2.1.1.11
fs6374DMTimeStampFormat
This object specifies the preferred timestamp format
which will be used for delay measurement calculation.
The below specified timestamp formats are supported for
Delay Measurement but now, time stamp format NTP is no…
FS6374TimeStampFormatr/w
Type Values:
0timeStampFormatNull
1timeStampFormatSequence
2timeStampFormatNTP
3timeStampFormatIEEE1588
 .1.3.6.1.4.1.29601.2.107.2.1.1.12
fs6374DMTransmitStatus
This object specifies the status of delay transmit and
an Enumerated value set to 'start' to initiate 1DM or
DMM transmission and 'stop' to stop 1DM or DMM transmission.
The values 'ready' and 'notReady' indicate wheth…
Fs6374TransmitStatusr/w
Type Values:
1start
2stop
3ready
4notReady
 .1.3.6.1.4.1.29601.2.107.2.1.1.13
fs6374CmbLMDMType
This object specifies the combined LMDM calculation type
provided by the service. The following two types are
possible:
oneway - Indicates that calculation of combined LMDM will be
in one way.
twoway - Ind…
Enumerationr/w
Enumerated Values:
1oneway
2twoway
 .1.3.6.1.4.1.29601.2.107.2.1.1.14
fs6374CmbLMDMMethod
This object specifies the combined LMDM calculation method
provided by the service. The following two methods are
possible:
direct - Indicates that the combined LMDM feature will work
in Direct Method…
Enumerationr/w
Enumerated Values:
1direct
2inferred
 .1.3.6.1.4.1.29601.2.107.2.1.1.15
fs6374CmbLMDMMode
This object specifies the combined LMDM calculation mode
provided by the service. The following two modes are
possible:
onDemand - Indicates that calculation of combined LMDM will
be done based on user …
Enumerationr/w
Enumerated Values:
1onDemand
2proActive
 .1.3.6.1.4.1.29601.2.107.2.1.1.16
fs6374CmbLMDMNoOfMessages
This object specifies the number of combined LMDM queries to be
sent in a session when method for LM calculation is `Ondemand`.
This object cannot be modified when the fs6374CmbLMDMTransmitStatus
is `notReady`.
Unsigned32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.29601.2.107.2.1.1.17
fs6374CmbLMDMTimeIntervalInMilliseconds
This object specifies the time interval between two combined
LMDM query packets for LM with the granularity of 10 milliseconds.
This object cannot be modified when fs6374CmbLMDMTransmitStatus
is `notReady`.
millisecondsUnsigned32r/w
Constraints:
range: 100-10000
 .1.3.6.1.4.1.29601.2.107.2.1.1.18
fs6374CmbLMDMTimeStampFormat
This object specifies the preferred timestamp format
which will be used for combined LMDM calculation.
The below specified timestamp formats are supported for
Combined loss and delay Measurement but now, time stamp
f…
FS6374TimeStampFormatr/w
Type Values:
0timeStampFormatNull
1timeStampFormatSequence
2timeStampFormatNTP
3timeStampFormatIEEE1588
 .1.3.6.1.4.1.29601.2.107.2.1.1.19
fs6374CmbLMDMTransmitStatus
This object specifies combined LMDM calculation transmission
status. The following two values are possible to set by
administrator:
start - To initiate combined LMDM transmission.
stop - To stop the combined LMDM …
Fs6374TransmitStatusr/w
Type Values:
1start
2stop
3ready
4notReady
 .1.3.6.1.4.1.29601.2.107.2.1.1.20
fs6374DMPaddingSize
This object specifies the size of the pattern to be included in
the Padding TLV of DM message.

This configuration is applicable only for Non-dyadic DM
Measurement.

Maximum frame size sugge…
Unsigned32r/w
Constraints:
range: 0-9000
 .1.3.6.1.4.1.29601.2.107.2.1.1.21
fs6374CmbLMDMPaddingSize
This object specifies the size of the pattern to be included in
the Padding TLV of Combined LMDM message.

This configuration is applicable only for Non-dyadic
Combined LMDM Measurement.

M…
Unsigned32r/w
Constraints:
range: 0-9000
 .1.3.6.1.4.1.29601.2.107.2.1.1.22

fs6374LMTable

table
.1.3.6.1.4.1.29601.2.107.3.1 · 1 row entry · 8 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fs6374LMTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-fs6374-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-fs6374-MIB::fs6374LMTable' 
This object specifies the table that holds the detailed buffer 
information for Loss measurement measured at various time 
intervals.
fs6374LMTableEntry row .1.3.6.1.4.1.29601.2.107.3.1.1
This object specifies the Loss statistics table entry.
Indexes
Column Syntax OID
fs6374LMSessionId
This object specifies the Loss measurement session id.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.3.1.1.1
fs6374LMSeqNum
This object specifies the locally maintained sequence number of
loss Entries.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.3.1.1.2
fs6374LMTxLossAtSenderEnd
This object specifies the transmit loss value which is calculated at
sender end.This value is populated for Two-way measurement.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.3.1.1.3
fs6374LMRxLossAtSenderEnd
This object specifies the receiver loss value which is calculated at
sender end. This value is populated for Two-way measurement.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.3.1.1.4
fs6374LMRxLossAtReceiverEnd
This object specifies the receiver loss value which is calculated at
sender end. This value is populated for one-way measurement.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.3.1.1.5
fs6374LMMeasurementTimeTakenInMilliseconds
This object specifies the time taken to measure loss.
millisecondsFS6374TimeRepresentation
Type Constraints:
range: 8
 .1.3.6.1.4.1.29601.2.107.3.1.1.6
fs6374LMTransmitResultOK
This object specifies the result of the operation:
- true The Loss measurement Message (1LM or LMM) will be
(or has been) sent.
- false The Loss measurement Message (1LM or LMM) will not be
sent.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.107.3.1.1.7
fs6374LMTestPktsCount
This object specifies the total number of test PDUs transmitted at sender end for each transaction. This value is populated for measurement.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.3.1.1.8

fs6374DMTable

table
.1.3.6.1.4.1.29601.2.107.4.1 · 1 row entry · 7 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fs6374DMTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-fs6374-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-fs6374-MIB::fs6374DMTable' 
This object specifies the table that contains the detailed buffer 
information for delay measured at various times.
fs6374DMTableEntry row .1.3.6.1.4.1.29601.2.107.4.1.1
The object specifies the detailed delay buffer table entry.
Indexes
Column Syntax OID
fs6374DMSessionId
This object specifies the delay measurement session id.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.4.1.1.1
fs6374DMSeqNum
This object specifies the locally maintained sequence number of
delay entries.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.4.1.1.2
fs6374DMDelayValue
This object specifies the measured delay value.
FS6374TimeRepresentation
Type Constraints:
range: 8
 .1.3.6.1.4.1.29601.2.107.4.1.1.3
fs6374DMRTDelayValue
This object specifies the measured round trip delay value.
FS6374TimeRepresentation
Type Constraints:
range: 8
 .1.3.6.1.4.1.29601.2.107.4.1.1.4
fs6374DMIPDV
This object specifies the Inter frame delay variation (IFDV),
calculated with respect to current transaction.
FS6374TimeRepresentation
Type Constraints:
range: 8
 .1.3.6.1.4.1.29601.2.107.4.1.1.5
fs6374DMPDV
This object specifies the Frame delay variation (IFDV), calculated
with respect to current transaction.
FS6374TimeRepresentation
Type Constraints:
range: 8
 .1.3.6.1.4.1.29601.2.107.4.1.1.6
fs6374DMTransmitResultOK
This object specifies the result of the operation:

- true The Delay measurement Message (1DM or DMM) will be
(or has been) sent.
- false The Delay measurement Message (1DM or DMM) will not…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.107.4.1.1.7

fs6374LMStatsTable

table
.1.3.6.1.4.1.29601.2.107.5.1 · 1 row entry · 27 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fs6374LMStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-fs6374-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-fs6374-MIB::fs6374LMStatsTable' 
This object specifies the table that contains the summary of Loss 
information based on Service name and Session Id.
fs6374LMStatsTableEntry row .1.3.6.1.4.1.29601.2.107.5.1.1
The object specifies the loss Statistics table entry.
Indexes
Column Syntax OID
fs6374LMStatsMplsType
This object specifies the Mpls type which could be Tunnel/Lsp
or PW.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.107.5.1.1.1
fs6374LMStatsFwdTnlIdOrPwId
This object specifies the Tunnel Id for unidirectional in forward
direction or PW Id based on Mpls type.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.5.1.1.2
fs6374LMStatsRevTnlId
This object specifies the Tunnel Id for unidirectional in
reverse direction.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.5.1.1.3
fs6374LMStatsSrcIpAddr
This object specifies the source IP Address.
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.29601.2.107.5.1.1.4
fs6374LMStatsDestIpAddr
This object specifies the destination IP Address.
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.29601.2.107.5.1.1.5
fs6374LMStatsTrafficClass
This object specifies the traffic class.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.107.5.1.1.6
fs6374LMStatsMode
This object specifies the method (ondemand or proactive) used for LM.
This is not applicable for one-way type.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.107.5.1.1.7
fs6374LMStatsMethod
This object specifies the method (inferred or direct) used for LM.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.107.5.1.1.8
fs6374LMStatsType
This object specifies the type (oneWay or twoWay) used for LM.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.107.5.1.1.9
fs6374LMStatsTimeStampFormat
This object specifies the value of timestamp format for the LM.
FS6374TimeStampFormat
Type Values:
0timeStampFormatNull
1timeStampFormatSequence
2timeStampFormatNTP
3timeStampFormatIEEE1588
 .1.3.6.1.4.1.29601.2.107.5.1.1.10
fs6374LMStatsStartTime
This object specifies the time at which loss measurement starts.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.5.1.1.11
fs6374LMStatsFarEndLossMin
This object specifies the minimum value of far-end loss.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.5.1.1.12
fs6374LMStatsFarEndLossMax
This object specifies the maxmium value of far-end loss.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.5.1.1.13
fs6374LMStatsFarEndLossAvg
This object specifies the average of the far-end loss measured
for a transaction.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.5.1.1.14
fs6374LMStatsNearEndLossMin
This object specifies the minimum value of near-end loss.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.5.1.1.15
fs6374LMStatsNearEndLossMax
This object specifies the maxmium value of near-end loss.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.5.1.1.16
fs6374LMStatsNearEndLossAvg
This object specifies the average of the near-end loss measured
for a transaction.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.5.1.1.17
fs6374LMStatsTxPktCount
This object specifies the number of frames with loss information
sent for a transaction.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.5.1.1.18
fs6374LMStatsRxPktCount
This object specifies the number of frames with loss information
received for a transaction.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.5.1.1.19
fs6374LMStatsThroughputpercent
This object specifies the throughput loss value for a transaction.
OctetString .1.3.6.1.4.1.29601.2.107.5.1.1.20
fs6374LMStatsResponseErrors
This object specifies the number of responses dropped due to
errors.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.5.1.1.21
fs6374LMStatsResponseTimeout
This object specifies the number of queries Timedout.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.5.1.1.22
fs6374LMStatsMeasurementOnGoing
This object specifies whether for the particular session,
measurement is ongoing or not.
Complete(0) Indicates measurement is ongoing.
OnGoing(1) Indicates measurement has been completed.
Aborted(2) …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.107.5.1.1.23
fs6374LMDyadicMeasurement
This object specifies the Loss Calculation done over
dyadic Measurement
enable(1) Indicates that Loss over Dyadic
disable(2) Indicates normal loss measurement.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.107.5.1.1.24
fs6374LMRemoteSessionId
This object specifies Remote Session ID for the Loss/Comb LMDM
calculation done over dyadic Measurement.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.5.1.1.25
fs6374LMDyadicProactiveRole
This object specifies the Loss Calculation done
for which Dyadic proactive role.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.107.5.1.1.26
fs6374IsLMBufferSQIEnabled
This object specifies whether the SQI was enabled or disabled
for the corresponding session when the LM buffer was created.
A value of 'true' indicates that SQI was enabled for that service
during that particular se…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.107.5.1.1.27

fs6374DMStatsTable

table
.1.3.6.1.4.1.29601.2.107.6.1 · 1 row entry · 32 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fs6374DMStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-fs6374-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-fs6374-MIB::fs6374DMStatsTable' 
This object specifies the table which holds the summary of delay 
information based on Service name and Session Id.
fs6374DMStatsTableEntry row .1.3.6.1.4.1.29601.2.107.6.1.1
This object specifies the delay Statistics table entry.
Indexes
Column Syntax OID
fs6374DMStatsMplsType
This object specifies the MPLS type which could be Tunnel/LSP
or PW.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.107.6.1.1.1
fs6374DMStatsFwdTnlIdOrPwId
This object specifies the tunnel Id for unidirectional in forward
direction or PW Id based on Mpls type.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.6.1.1.2
fs6374DMStatsRevTnlId
This object specifies the tunnel Id for unidirectional in reverse
direction.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.6.1.1.3
fs6374DMStatsSrcIpAddr
This object specifies the source IP Address.
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.29601.2.107.6.1.1.4
fs6374DMStatsDestIpAddr
This object specifies the destination IP Address.
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.29601.2.107.6.1.1.5
fs6374DMStatsTrafficClass
This object specifies the traffic class.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.107.6.1.1.6
fs6374DMStatsMode
This object specifies the method (ondemand or proactive) used for DM.
This is not applicable for one-way type.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.107.6.1.1.7
fs6374DMStatsType
This object specifies type (oneWay or twoWay) used for DM.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.107.6.1.1.8
fs6374DMStatsTimeStampFormat
This object specifies the value of timestamp format for the DM.
FS6374TimeStampFormat
Type Values:
0timeStampFormatNull
1timeStampFormatSequence
2timeStampFormatNTP
3timeStampFormatIEEE1588
 .1.3.6.1.4.1.29601.2.107.6.1.1.9
fs6374DMStatsStartTime
This object specifies the time at which delay measurement starts.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.6.1.1.10
fs6374DMStatsMinDelay
This object specifies the minimum value of delay.
millisecondsFS6374TimeRepresentation
Type Constraints:
range: 8
 .1.3.6.1.4.1.29601.2.107.6.1.1.11
fs6374DMStatsMaxDelay
This object specifies the maximum value of frame-delay.
millisecondsFS6374TimeRepresentation
Type Constraints:
range: 8
 .1.3.6.1.4.1.29601.2.107.6.1.1.12
fs6374DMStatsAvgDelay
This object specifies the average delay measured for a one-way or
two-way delay measurement for a transaction.
millisecondsFS6374TimeRepresentation
Type Constraints:
range: 8
 .1.3.6.1.4.1.29601.2.107.6.1.1.13
fs6374DMStatsMinRTDelay
This object specifies the minimum value of round trip delay.
millisecondsFS6374TimeRepresentation
Type Constraints:
range: 8
 .1.3.6.1.4.1.29601.2.107.6.1.1.14
fs6374DMStatsMaxRTDelay
This object specifies the maximum value of round trip delay.
millisecondsFS6374TimeRepresentation
Type Constraints:
range: 8
 .1.3.6.1.4.1.29601.2.107.6.1.1.15
fs6374DMStatsAvgRTDelay
This object specifies the average delay measured for a round trip
delay measurement for a transaction.
millisecondsFS6374TimeRepresentation
Type Constraints:
range: 8
 .1.3.6.1.4.1.29601.2.107.6.1.1.16
fs6374DMStatsMinIPDV
This object specifies the minimum value of IPDV.
millisecondsFS6374TimeRepresentation
Type Constraints:
range: 8
 .1.3.6.1.4.1.29601.2.107.6.1.1.17
fs6374DMStatsMaxIPDV
This object specifies the maximum value of IPDV.
millisecondsFS6374TimeRepresentation
Type Constraints:
range: 8
 .1.3.6.1.4.1.29601.2.107.6.1.1.18
fs6374DMStatsAvgIPDV
This object specifies the average delay measured for a IPDV.
millisecondsFS6374TimeRepresentation
Type Constraints:
range: 8
 .1.3.6.1.4.1.29601.2.107.6.1.1.19
fs6374DMStatsMinPDV
This object specifies the minimum value of PDV.
millisecondsFS6374TimeRepresentation
Type Constraints:
range: 8
 .1.3.6.1.4.1.29601.2.107.6.1.1.20
fs6374DMStatsMaxPDV
This object specifies the maximum value of PDV.
millisecondsFS6374TimeRepresentation
Type Constraints:
range: 8
 .1.3.6.1.4.1.29601.2.107.6.1.1.21
fs6374DMStatsAvgPDV
This object specifies the average delay measured for a PDV.
millisecondsFS6374TimeRepresentation
Type Constraints:
range: 8
 .1.3.6.1.4.1.29601.2.107.6.1.1.22
fs6374DMStatsTxPktCount
This object specifies the count of transmitted DM packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.6.1.1.23
fs6374DMStatsRxPktCount
This object specifies the count of received DM packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.6.1.1.24
fs6374DMStatsResponseErrors
This object specifies the number of Responses dropped due to errors.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.6.1.1.25
fs6374DMStatsResponseTimeout
This object specifies the number of queries timedout.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.6.1.1.26
fs6374DMStatsMeasurementOnGoing
This object specifies whether for the particular session,
measurement is ongoing or not.
Complete(0) Indicates measurement is ongoing.
OnGoing(1) Indicates measurement has been completed.
Aborted(2) …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.107.6.1.1.27
fs6374DMDyadicMeasurement
This object specifies the Delay Calculation done over
dyadic Measurement
enable(1) Indicates that Delay over Dyadic
disable(2) Indicates normal Delay measurement.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.107.6.1.1.28
fs6374DMRemoteSessionId
This object specifies Remote Session ID for the Delay/Comb LMDM
calculation done over dyadic Measurement.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.6.1.1.29
fs6374DMDyadicProactiveRole
This object specifies the Delay Calculation done
for which Dyadic proactive role.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.107.6.1.1.30
fs6374DMStatsPaddingSize
This object specifies the Delay Calculation done
for which Padding size.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.6.1.1.31
fs6374IsDMBufferSQIEnabled
This object specifies whether the SQI was enabled or disabled
for the corresponding session when the DM buffer was created.
A value of 'true' indicates that SQI was enabled for that service
during that particular se…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.107.6.1.1.32

fs6374StatsTable

table
.1.3.6.1.4.1.29601.2.107.7.1 · 1 row entry · 18 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fs6374StatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-fs6374-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-fs6374-MIB::fs6374StatsTable' 
This object specifies the list of per virtual context 6374 Module Statistics.
fs6374StatsTableEntry row .1.3.6.1.4.1.29601.2.107.7.1.1
This object specifies the Per virtual context 6374 Module Statistics.
Indexes
Column Syntax OID
fs6374StatsLmmOut
This object specifies the number of LMM PDUs transmitted.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.7.1.1.1
fs6374StatsLmmIn
This object specifies the number of LMM PDUs received.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.7.1.1.2
fs6374StatsLmrOut
This object specifies the number of LMR PDUs transmitted.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.7.1.1.3
fs6374StatsLmrIn
This object specifies the number of LMR PDUs received.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.7.1.1.4
fs6374Stats1LmOut
This object specifies the number of 1LM PDUs transmitted.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.7.1.1.5
fs6374Stats1LmIn
This object specifies the number of 1LM PDUs received.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.7.1.1.6
fs6374Stats1DmOut
This object specifies the number of 1DM PDUs transmitted.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.7.1.1.7
fs6374Stats1DmIn
This object specifies the number of 1DM PDUs received.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.7.1.1.8
fs6374StatsDmmOut
This object specifies the number of DMM PDUs transmitted.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.7.1.1.9
fs6374StatsDmmIn
This object specifies the number of DMM PDUs received.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.7.1.1.10
fs6374StatsDmrOut
This object specifies the number of DMR PDUs transmitted.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.7.1.1.11
fs6374StatsDmrIn
This object specifies the number of DMR PDUs received.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.7.1.1.12
fs6374StatsCmb1LmDmOut
This object specifies the number of combined LMDM one way PDUs
transmitted.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.7.1.1.13
fs6374StatsCmb1LmDmIn
This object specifies the number of combined LMDM one way PDUs
received.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.7.1.1.14
fs6374StatsCmbLmmDmmOut
This object specifies the number of combined LMDM two way PDUs
transmitted.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.7.1.1.15
fs6374StatsCmbLmmDmmIn
This object specifies the number of combined LMDM two way PDUs
received.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.7.1.1.16
fs6374StatsCmbLmrDmrOut
This object specifies the number of combined LMR DMR two way PDUs
transmitted.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.7.1.1.17
fs6374StatsCmbLmrDmrIn
This object specifies the number of combined LMR DMR two ways PDUs
received.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.107.7.1.1.18

fs6374SystemConfigTable

table
.1.3.6.1.4.1.29601.2.107.8.1 · 1 row entry · 6 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fs6374SystemConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-fs6374-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-fs6374-MIB::fs6374SystemConfigTable' 
This object specifies the table that contains system level 
information.
fs6374SystemConfigEntry row .1.3.6.1.4.1.29601.2.107.8.1.1
This object specifies the SystemConfig entry.
Indexes
Column Syntax OID
fs6374SystemControl
This object specifies the administrative system control status of
6374 module.
The value 'start' (1) indicates that all
resources required by the module should be allocated
and 6374 should be supported in the dev…
Enumerationr/w
Enumerated Values:
1start
2shutdown
 .1.3.6.1.4.1.29601.2.107.8.1.1.1
fs6374ModuleStatus
This object specifies the administrative module status of 6374 module.
This enables or disables 6374 in the system.
A value of 'enabled' (1) indicates that 6374 is
enabled in the device. A value of 'disabled'
(2) indi…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.107.8.1.1.2
fs6374DMBufferClear
This object specifies the trigger to remove the contents of Buffer
maintained for storing delay measured at various times.
Note: Get operation value should be ignored.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.107.8.1.1.3
fs6374LMBufferClear
This object specifies the trigger to remove the contents of Buffer
maintained for storing loss measured at various times.

Note: Get operation value should be ignored.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.107.8.1.1.4
fs6374DebugLevel
This object is used to enable the tracing in the selected submodule.
A 32 bit integer is used to store the Tracing level in the specified
module.
Different Tracing Levels -
BIT 0 - Initialisation and Shutdown Trace.
B…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.29601.2.107.8.1.1.5
fs6374TSFormatSupported
This object specifies the timestamp format supported in the system.
The below specified timestamp formats are supported in the system.
timeStampFormatNTP (2),
timeStampFormatIEEE1588 (3)
When …
FS6374SuppTimeStampFormat
Type Values:
1tsFormatNTP
2tsFormatIEEE1588
 .1.3.6.1.4.1.29601.2.107.8.1.1.6

fs6374NotificationsTable

table
.1.3.6.1.4.1.29601.2.107.9.1 · 1 row entry · 1 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fs6374NotificationsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-fs6374-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-fs6374-MIB::fs6374NotificationsTable' 
This object specifies the list of Traps supported in 6374.
fs6374NotificationsEntry row .1.3.6.1.4.1.29601.2.107.9.1.1
This object specifies the notification entry.
Indexes
Column Syntax OID
fs6374LMDMTrapControl
This object specifies a vector of Boolean notification types,
used to enable or disable the LM&DM Traps:
bTrapUnsupportedVersion (1),
bTrapUnsupportedControlCode (2),
bTrapU…
FS6374Trapsr/w
Type Values:
0none
1bTrapUnsupportedVersion
2bTrapUnsupportedControlCode
3bTrapUnsupportedDataFormat
4bTrapConnectionMismatch
5bTrapUnsupportedMandatoryTLVObject
6bTrapUnsupportedTimeStamp
7bTrapResponseTimeout
8bTrapResourceUnavailable
9bTrapTestAbort
10bTrapProactiveTestRestart
11bTrapUnsupportedQueryInterval
 .1.3.6.1.4.1.29601.2.107.9.1.1.1