ARICENT-Y1564-CFG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
92

fsY1564ContextTable

table
.1.3.6.1.4.1.29601.2.88.1.1 · 1 row entry · 8 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsY1564ContextTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-Y1564-CFG-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-Y1564-CFG-MIB::fsY1564ContextTable' 
Table of Y1564 module parameters per Y1564 Virtual Context.
fsY1564ContextEntry row .1.3.6.1.4.1.29601.2.88.1.1.1
This entry contains virtual context specific Y1564 module parameters.
Indexes
Column Syntax OID
fsY1564ContextId
Identifies the virtual context in the system
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.1.1.1.1
fsY1564ContextName
This object gives the context-name for this virtual context.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.29601.2.88.1.1.1.2
fsY1564ContextSystemControl
The administrative system control status of Y1564 module.

The value 'start' (1) indicates that all resources required
by Y1564 should be allocated and Y1564 should be supported
in the virtual context.
…
Enumerationr/w
Enumerated Values:
1start
2shutdown
 .1.3.6.1.4.1.29601.2.88.1.1.1.3
fsY1564ContextModuleStatus
The administrative module status of Y1564 module.

The value 'enable (1)' indicates that Y1564 should
be enabled in the virtual context

The value 'disable (2)' indicates that Y1564 should
…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.29601.2.88.1.1.1.4
fsY1564ContextTraceOption
This object is used to enable the trace statements in
Y1564 Module.

A FOUR BYTE integer is specified for enabling the level of tracing.
Each BIT in the four byte integer, represents a
level of Trace.
…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.29601.2.88.1.1.1.5
fsY1564ContextTrapStatus
This object is used to enable or disable the transmission of
TRAP notification messages.

By default this object is set to enable(1) for all virtual
contexts.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.29601.2.88.1.1.1.6
fsY1564ContextNumOfConfTestRunning
This object indicates the number of configuration tests are
currently running in the virtual context.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.1.1.1.7
fsY1564ContextNumOfPerfTestRunning
This object indicates the number of performance test are
currently running in the virtual context.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.1.1.1.8

fsY1564SlaTable

table
.1.3.6.1.4.1.29601.2.88.2.1 · 1 row entry · 22 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsY1564SlaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-Y1564-CFG-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-Y1564-CFG-MIB::fsY1564SlaTable' 
This table contains Y1564 Service Level Agreement configurations.
SLA is an Agreement between service provider and subscribers
fsY1564SlaEntry row .1.3.6.1.4.1.29601.2.88.2.1.1
This entry contains information about a particular Y1564 SLA
Configuration.
Indexes
Column Syntax OID
fsY1564SlaId
This object specifies the Y1564 Service Level Agreement Identifier
(An Agreement between service provider and subscribers).
This is a free running index used to identify the SLA.
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.29601.2.88.2.1.1.1
fsY1564SlaEvcIndex
This object specifies the service provider VLAN (S-VLAN)
on which service is created. The EVC is configured using MEF MIB.
Internally this object refers to fsEvcIndex in MEF MIB.
Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.29601.2.88.2.1.1.2
fsY1564SlaMEG
This object specifies the Maintenance Entity Group (MEG) of the
fsY1564SlaEntry. Internally this object refers to MIB object
dot1agCfmMdIndex of ECFM 802.1ag standard. The value Zero is
used for unmapping MEG from Sla.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.29601.2.88.2.1.1.3
fsY1564SlaME
This object specifies the Maintenance Entity (ME) of the
fsY1564SlaEntry.Internally this object refers to MIB object
dot1agCfmMaIndex of ECFM 802.1ag standard. The value Zero is
used for unmapping ME from Sla
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.29601.2.88.2.1.1.4
fsY1564SlaMEP
This object specifies the Maintenance Association End Point (MEP)
of the fsY1564SlaEntry. Internally this object refers to MIB object
dot1agCfmMepIdentifier of ECFM 802.1ag standard. The value Zero is
used for unmappi…
Unsigned32r/w
Constraints:
range: 0-8191
 .1.3.6.1.4.1.29601.2.88.2.1.1.5
fsY1564SlaSacId
This object specifies the Service Acceptance Criteria to which
the SLA is currently mapped.Multiple SACs can be created and
each can be associated to a given SLA.Each SAC refers to the
minimum Information rate, frame…
Unsigned32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.29601.2.88.2.1.1.6
fsY1564SlaTrafProfileId
This object specifies the Traffic Profile to which the SLA is currently
mapped. Multiple packet profiles can be created and each can be associated
to a given SLA. Each packet profile contains packet information such a…
Unsigned32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.29601.2.88.2.1.1.7
fsY1564SlaStepLoadRate
This object specifies the step load rate of the step load CIR
(Committed Information Rate) configuration test. If no
value is provided, 25% of CIR is sent first,followed by
50% of CIR and so on; the complete CIR is g…
Integer32r/w
Constraints:
range: 10-100
 .1.3.6.1.4.1.29601.2.88.2.1.1.8
fsY1564SlaConfTestDuration
This object specifies the duration of each individual test in
seconds. If Configuration test is started with CIR, EIR,
Traffic Policing and fsY1564SlaConfTestDurationis specified as
10 then all the three tests should be…
Integer32r/w
Constraints:
range: 10-60
 .1.3.6.1.4.1.29601.2.88.2.1.1.9
fsY1564SlaTestStatus
This object specifies the Y1564 Service Configuration
test initiation status.
An enumerated value set to 'start' initiates service
configuration test based on bits selected in
object fsY1564SlaTestSelector.
…
Enumerationr/w
Enumerated Values:
1start
2stop
 .1.3.6.1.4.1.29601.2.88.2.1.1.10
fsY1564SlaServiceConfId
This object specifies the Service Configuration to which the SLA is currently
mapped. Multiple services can be created and each can be associated
to a given SLA. Each service contains the service configuration informati…
Unsigned32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.29601.2.88.2.1.1.11
fsY1564SlaColorMode
This object specifies whether the color-aware or color blind property is
employed by the bandwidth profile. The default value for this object is
ColorBlind.
Enumeration
Enumerated Values:
1colorAware
2colorBlind
 .1.3.6.1.4.1.29601.2.88.2.1.1.12
fsY1564SlaCoupFlag
This object specifies the modes of operation of the rate enforcement
algorithm. The choice of the value for CF has the effect of controlling the
volume of the Service Frames that are declared Yellow. When CF is set to …
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.88.2.1.1.13
fsY1564SlaCIR
The committed information rate Must be >= 0. CIR must be less than or
equal to EIR,if EIR > 0.
Unsigned32
Constraints:
range: 0-10485760
 .1.3.6.1.4.1.29601.2.88.2.1.1.14
fsY1564SlaCBS
The committed burst size Must be > 0 if CIR > 0.
BytesUnsigned32
Constraints:
range: 0-10485760
 .1.3.6.1.4.1.29601.2.88.2.1.1.15
fsY1564SlaEIR
The excess information rate Must be >= 0. EIR must be greater than or
equal to CIR,if EIR > 0.
Unsigned32
Constraints:
range: 0-10485760
 .1.3.6.1.4.1.29601.2.88.2.1.1.16
fsY1564SlaEBS
The excess burst size Must be > 0 if EIR > 0.
BytesUnsigned32
Constraints:
range: 0-10485760
 .1.3.6.1.4.1.29601.2.88.2.1.1.17
fsY1564SlaTrafPolicing
This object specifies the Traffic policing status. If the Trafific policing
status is set as off then Traffic polincing test is not triggered for the
specified SLA Id.Default Value for this object is on.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.29601.2.88.2.1.1.18
fsY1564SlaTestSelector
This object specifies the Test Input to be tested for the Test.

A FOUR BYTE integer is used to specify the Test Inputs. Each BIT in the
four byte integer represents the tests are to be included in Servic…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.29601.2.88.2.1.1.19
fsY1564SlaCurrentTestMode
This object specifies the currently running test
in service configuration test.
The mode will be one of the following

0 - Indicates the no test is in progress
1 - Simple CIR Validation Test
2 - Step Load …
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.29601.2.88.2.1.1.20
fsY1564SlaCurrentTestState
This object specifies the current test state of the SLA.
Enumeration
Enumerated Values:
1notInitiated
2completed
3inProgress
4aborted
 .1.3.6.1.4.1.29601.2.88.2.1.1.21
fsY1564SlaRowStatus
This object specifies the row status and is used to create or
deletea new entry by setting this object to the appropriate value as
mentioned in SMI-v2.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.88.2.1.1.22

fsY1564TrafProfTable

table
.1.3.6.1.4.1.29601.2.88.3.1 · 1 row entry · 7 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsY1564TrafProfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-Y1564-CFG-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-Y1564-CFG-MIB::fsY1564TrafProfTable' 
This table contains Traffic Profile configurations.
fsY1564TrafProfEntry row .1.3.6.1.4.1.29601.2.88.3.1.1
This entry contains information about a particular Traffic Profile
configuration.
Indexes
Column Syntax OID
fsY1564TrafProfId
This object specifies the Y1564 Traffic Profile Identifier. This is a free
running index.
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.29601.2.88.3.1.1.1
fsY1564TrafProfDir
This object specifies the direction of Y1564 Traffic Profile Generation.
When this object is set as external, the traffic is generated at the
wire-side of network-to-network interface (NNI) and is transmitted to the
re…
Enumerationr/w
Enumerated Values:
1external
2internal
 .1.3.6.1.4.1.29601.2.88.3.1.1.2
fsY1564TrafProfPktSize
This object specifies the Y1564 Traffic Profile Packet Size in bytes.
Allowable frame sizes are 64,128,256,512,1024,1280 and 1518
Integer32r/w
Constraints:
range: 64-1518
 .1.3.6.1.4.1.29601.2.88.3.1.1.3
fsY1564TrafProfPayload
This object specifies the Y1564 Payload in the packet profile.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.29601.2.88.3.1.1.4
fsY1564TrafProfOptEmixPktSize
This object specifies the optional variable-size pattern
(EMIX)in bytes for Y1564 Traffic Profile.
Frame Sizes and corresponding size desiginations are
a - 64, b - 128, c - 256, d - 512,e - 1024, f - 1280 ,g - 1518.
…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.29601.2.88.3.1.1.5
fsY1564TrafProfPCP
This object specifies the priority that is to be inserted
in the generated test frames. PCP value is inserted only if the Mep Type is
Vlan based Mep.
IEEE8021-TC-MIBIEEE8021PriorityCodePointr/w
Type Values:
1codePoint8p0d
2codePoint7p1d
3codePoint6p2d
4codePoint5p3d
 .1.3.6.1.4.1.29601.2.88.3.1.1.6
fsY1564TrafProfRowStatus
This object specifies the row status and is used to create or delete a new
entry by setting this object to the appropriate value as mentioned in SMI-v2.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.88.3.1.1.7

fsY1564SacTable

table
.1.3.6.1.4.1.29601.2.88.4.1 · 1 row entry · 7 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsY1564SacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-Y1564-CFG-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-Y1564-CFG-MIB::fsY1564SacTable' 
This table contains Service Acceptance Criteria Profile configuration. 
Service Acceptance Criteria (SAC) is a set of criteria used to ensure that
a service meets its functionality and quality requirement and that the
service is ready to operate when it has been deployed.
fsY1564SacEntry row .1.3.6.1.4.1.29601.2.88.4.1.1
This entry contains information about a particular SAC Profile configuration.
Indexes
Column Syntax OID
fsY1564SacId
This object specifies the Y1564 SAC Identifier used to identify
the particular SAC entry.
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.29601.2.88.4.1.1.1
fsY1564SacInfoRate
This object specifies the Y1564 Information Rate configured as
part of this SAC. This is the minimum Information Rate that each
services are expected to be met.

Information rate is the maximum rate at w…
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.29601.2.88.4.1.1.2
fsY1564SacFrLossRatio
This object specifies the Y1564 Frame Loss Ratio (FLR) configured as
part of this SAC. This is the minimum frame loss ratio that each
services are expected to be met.

Frame Loss Ratio measures the number…
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.29601.2.88.4.1.1.3
fsY1564SacFrTransDelay
This object specifies the Y1564 Frame Transfer Delay (FTD) configured
as part of this SAC. This is the minimum frame transfer delay
(in milliseconds) that each services are expected to be met.

Frame Tra…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.88.4.1.1.4
fsY1564SacFrDelayVar
This object specifies the Y1564 Frame Delay Variation configured
as part of this SAC. This is the minimum frame delay variation
(in milliseconds) that each services are expected to be met.

Frame Delay V…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.88.4.1.1.5
fsY1564SacAvailability
This object specifies the Y1564 Availability configured as part
of this SAC. This is the maximum avaliablity that each
services are expected to be met.
Example: 50% should be given as 50.00
39.61% should be…
OctetStringr/w
Constraints:
range: 1-6
 .1.3.6.1.4.1.29601.2.88.4.1.1.6
fsY1564SacRowStatus
This object specifies the row status and is used to create or
delete a new entry by setting this object to the appropriate
value as mentioned in SMI-v2.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.88.4.1.1.7

fsY1564ServiceConfTable

table
.1.3.6.1.4.1.29601.2.88.5.1 · 1 row entry · 8 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsY1564ServiceConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-Y1564-CFG-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-Y1564-CFG-MIB::fsY1564ServiceConfTable' 
This table contains Service Configuration information.
It includes bandwidth profile parameters, 
VLAN Index and Interface Index which will be used to create a 
service when MEF module is not defined.
fsY1564ServiceConfEntry row .1.3.6.1.4.1.29601.2.88.5.1.1
This entry contains information about a particular Y1564 Service
specific configuration.
Indexes
Column Syntax OID
fsY1564ServiceConfId
This object specifies the Y1564 Service Configuration Identifier.
This is a free running index used to identify a Service Configuration.
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.29601.2.88.5.1.1.1
fsY1564ServiceConfColorMode
This object specifies whether the color-aware or color blind
property is employed by the bandwidth profile.
The default value for this object is ColorBlind.
Enumerationr/w
Enumerated Values:
1colorAware
2colorBlind
 .1.3.6.1.4.1.29601.2.88.5.1.1.2
fsY1564ServiceConfCoupFlag
This object specifies the modes of operation of the rate enforcement
algorithm. The choice of the value for CF has the effect of controlling the
volume of the Service Frames that are declared Yellow. When CF is set to …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.88.5.1.1.3
fsY1564ServiceConfCIR
The committed information rate Must be >= 0. CIR must be less than or
equal to EIR,if EIR > 0.
Unsigned32r/w
Constraints:
range: 0-10485760
 .1.3.6.1.4.1.29601.2.88.5.1.1.4
fsY1564ServiceConfCBS
The committed burst size Must be > 0 if CIR > 0. Maximum allowable size
will be jumbo frame size.
Unsigned32r/w
Constraints:
range: 0-10485760
 .1.3.6.1.4.1.29601.2.88.5.1.1.5
fsY1564ServiceConfEIR
The excess information rate Must be >= 0. EIR must be greater than or
equal to CIR,if EIR > 0.
Unsigned32r/w
Constraints:
range: 0-10485760
 .1.3.6.1.4.1.29601.2.88.5.1.1.6
fsY1564ServiceConfEBS
The excess burst size Must be > 0 if EIR > 0.
Unsigned32r/w
Constraints:
range: 0-10485760
 .1.3.6.1.4.1.29601.2.88.5.1.1.7
fsY1564ServiceConfRowStatus
This object specifies the row status and is used to create or
delete a new entry by setting this object to the appropriate
value as mentioned in SMI-v2.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.88.5.1.1.8

fsY1564ConfigTestReportTable

table
.1.3.6.1.4.1.29601.2.88.6.1 · 1 row entry · 18 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsY1564ConfigTestReportTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-Y1564-CFG-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-Y1564-CFG-MIB::fsY1564ConfigTestReportTable' 
This table contains the statistics of the SLA operation performed.
fsY1564ConfigTestReportEntry row .1.3.6.1.4.1.29601.2.88.6.1.1
This entry specifies the statistics about a particular step in the SLA
operation performed.
Indexes
Column Syntax OID
fsY1564ConfigTestReportSlaId
This object specifies the SLA Id of service configuration test.
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.29601.2.88.6.1.1.1
fsY1564ConfigTestReportFrSize
This object specifies the Y1564 frame size in SLA operation statistics.
Integer32
Constraints:
range: 64-1518
 .1.3.6.1.4.1.29601.2.88.6.1.1.2
fsY1564ConfigTestCurrentTestMode
This object specifies the Currently active test running
as part of service configuration test.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.29601.2.88.6.1.1.3
fsY1564ConfigTestReportStepId
This object specifies the Y1564 Step Index in SLA operation statistics.
Step Id for each test as follows.
1. For Simple CIR Validation test, step Id will be one
2. For Step Load CIR, step Id is based on step load rate
3…
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.29601.2.88.6.1.1.4
fsY1564ConfigTestReportResult
This oject specifies the result of Service Configuration Test.
Enumeration
Enumerated Values:
1pass
2fail
 .1.3.6.1.4.1.29601.2.88.6.1.1.5
fsY1564ConfigTestReportIrMin
This object indicates the Minimum value of Information Rate in KBPS for
the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.6.1.1.6
fsY1564ConfigTestReportIrMean
This object indicates the Mean value of Information Rate in KBPS for
the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.6.1.1.7
fsY1564ConfigTestReportIrMax
This object indicates the Maximum value of Information Rate in KBPS
for the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.6.1.1.8
fsY1564ConfigTestReportFrLossCnt
This object indicates the number of frames lost during the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.6.1.1.9
fsY1564ConfigTestReportFrLossRatio
This object specifies the Frame Loss Ratio observed during the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.6.1.1.10
fsY1564ConfigTestReportFrTxDelayMin
This object specifies the Minimum Frame Transfer Delay observed
during the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.6.1.1.11
fsY1564ConfigTestReportFrTxDelayMean
This object specifies the Mean Frame Transfer Delay observed during
the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.6.1.1.12
fsY1564ConfigTestReportFrTxDelayMax
This object specifies the Maximum Frame Transfer Delay observed
during the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.6.1.1.13
fsY1564ConfigTestReportFrDelayVarMin
This object specifies the Minimum Frame Delay Variation observed
during the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.6.1.1.14
fsY1564ConfigTestReportFrDelayVarMean
This object specifies the Mean Frame Delay Variation observed
during the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.6.1.1.15
fsY1564ConfigTestReportFrDelayVarMax
This object specifies the Maximum Frame Delay Variation observed
during the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.6.1.1.16
fsY1564ConfigTestReportTestStartTime
This object specifies the service start time of the test in Y1564
for Service configuration test.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.29601.2.88.6.1.1.17
fsY1564ConfigTestReportTestEndTime
This object specifies the service end time of the test in Y1564
for Service configuration test.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.29601.2.88.6.1.1.18

fsY1564PerformanceTestTable

table
.1.3.6.1.4.1.29601.2.88.7.1 · 1 row entry · 5 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsY1564PerformanceTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-Y1564-CFG-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-Y1564-CFG-MIB::fsY1564PerformanceTestTable' 
This table contains Service performance test related information.
Each entry in this table corresponds to a configured SLA entry in fsy1564SlaTable.
 Entry in this table has to be created explicitly.
fsY1564PerformanceTestEntry row .1.3.6.1.4.1.29601.2.88.7.1.1
This entry contains information about a particular Y1564 performance
specific configuration.
Indexes
Column Syntax OID
fsY1564PerformanceTestIndex
This object specifies the Y1564 performance test Identifier.
This is a free running index used to identify a service performance test.
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.29601.2.88.7.1.1.1
fsY1564PerformanceTestSlaList
This object specifies the SLA lists to be tested in Y1564
for Service performance test.
Example: SLA 1, 2, 3, 5, 7, 10 should be given as 1-2-3-5-7-10
OctetStringr/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.29601.2.88.7.1.1.2
fsY1564PerformanceTestDuration
This object is used to configure the period to complete Service
Performance Test.The default interval for this object is 2
hours.
Enumerationr/w
Enumerated Values:
1interval15min
2interval2hour
3interval24hour
 .1.3.6.1.4.1.29601.2.88.7.1.1.3
fsY1564PerformanceTestStatus
This object specifies the Y1564 Service Performance
test initiation status.
An enumerated value set to 'start' initiates service
performance test will be started for the SLA
lists specified in object fsY1564PerfSlaLi…
Enumerationr/w
Enumerated Values:
1start
2stop
 .1.3.6.1.4.1.29601.2.88.7.1.1.4
fsY1564PerformanceTestRowStatus
Denotes the Row status of the service performance test entry.
This object specifies the row status and is used to create or
delete a new entry by setting this object to the appropriate
value as mentioned in SMI-v2.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.88.7.1.1.5

fsY1564PerfTestReportTable

table
.1.3.6.1.4.1.29601.2.88.8.1 · 1 row entry · 17 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsY1564PerfTestReportTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-Y1564-CFG-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-Y1564-CFG-MIB::fsY1564PerfTestReportTable' 
This table contains the statistics of the SLA operation performed.
fsY1564PerfTestReportEntry row .1.3.6.1.4.1.29601.2.88.8.1.1
This entry specifies the statistics about a particular step in the SLA
operation performed.
Indexes
Column Syntax OID
fsY1564PerfTestReportFrSize
This object specifies the frame size in SLA performance test statistics.
Integer32
Constraints:
range: 64-1518
 .1.3.6.1.4.1.29601.2.88.8.1.1.1
fsY1564PerfTestReportResult
This oject specifies the result of service Performance Test.
Enumeration
Enumerated Values:
1pass
2fail
 .1.3.6.1.4.1.29601.2.88.8.1.1.2
fsY1564PerfTestReportIrMin
This object indicates the Minimum value of Information Rate in KBPS for
the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.8.1.1.3
fsY1564PerfTestReportIrMean
This object indicates the Mean value of Information Rate in KBPS for
the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.8.1.1.4
fsY1564PerfTestReportIrMax
This object indicates the Maximum value of Information Rate in KBPS for
the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.8.1.1.5
fsY1564PerfTestReportFrLossCnt
This object indicates the number of frames lost during the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.8.1.1.6
fsY1564PerfTestReportFrLossRatio
This object specifies the Frame Loss Ratio observed during the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.8.1.1.7
fsY1564PerfTestReportFrTxDelayMin
This object specifies the Minimum Frame Transfer Delay observed
during the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.8.1.1.8
fsY1564PerfTestReportFrTxDelayMean
This object specifies the Mean Frame Transfer Delay observed during
the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.8.1.1.9
fsY1564PerfTestReportFrTxDelayMax
This object specifies the Maximum Frame Transfer Delay observed
during the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.8.1.1.10
fsY1564PerfTestReportFrDelayVarMin
This object specifies the Minimum Frame Delay Variation observed
during the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.8.1.1.11
fsY1564PerfTestReportFrDelayVarMean
This object specifies the Mean Frame Delay Variation observed
during the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.8.1.1.12
fsY1564PerfTestReportFrDelayVarMax
This object specifies the Maximum Frame Delay Variation observed
during the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.8.1.1.13
fsY1564PerfTestReportAvailability
This object specifies the Availability of the service during the
test.
OctetString
Constraints:
range: 1-6
 .1.3.6.1.4.1.29601.2.88.8.1.1.14
fsY1564PerfTestReportUnavailableCount
This object specifies the Unavailable frame count during
the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.88.8.1.1.15
fsY1564PerfTestReportTestStartTime
This object specifies the service start time of the test in Y1564
for Service performance test.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.29601.2.88.8.1.1.16
fsY1564PerfTestReportTestEndTime
This object specifies the service end time of the test in Y1564
for Service performance test.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.29601.2.88.8.1.1.17