ARICENT-POE-MIB Table View

This table contains information associated MAC Addresses for which 
Power has to be applied.

fsPoeMacEntry row .1.3.6.1.4.1.2076.103.1.2.1

Powered Device(PD)s MAC address, the port through which its
been learnt

Indexes

fsPoePdMacAddress

Column	Syntax	OID
fsPoePdMacAddress MAC address of the PD.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2076.103.1.2.1.1
fsPoePdMacPort This object stores the port through which the fsPoePdMacAddress has been learnt	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2076.103.1.2.1.2
fsPoePdMacRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.103.1.2.1.3

A table of objects that display and control non-standard power
characteristics of power Ethernet ports on a Power Source
Entity (PSE) device.  This group will be implemented in
managed power Ethernet switches and mid-span devices.
Values of all read-write objects in this table are
persistent at restart/reboot.

fsPethPsePortEntry row .1.3.6.1.4.1.2076.103.1.3.1

A set of objects that display and control non-standard power
characteristics of a power Ethernet PSE port.

Indexes

fsPethPsePortGroupIndex fsPethPsePortIndex

Column	Syntax	OID
fsPethPsePortGroupIndex This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2076.103.1.3.1.1
fsPethPsePortIndex This variable uniquely identifies the power Ethernet PSE port within group fsPethPsePortGroupIndex to which the power Ethernet PSE entry is connected.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2076.103.1.3.1.2
fsPethPsPortPowerMeasurementsAmperage This variable contains the amperage value of a power Ethernet PSE port on which a device is connected	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2076.103.1.3.1.3
fsPethPsPortPowerMeasurementsVoltage This variable contains the voltage value of a power Ethernet PSE port on which a device is connected	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2076.103.1.3.1.4
fsPethPsPortPowerMeasurementsWattage This variable contains the wattage value of a power Ethernet PSE port on which a device is connected	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2076.103.1.3.1.5
fsPethPsPortPowerPriorityStatic This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used by a control mechanism that prevents over current situations…	Enumeration Enumerated Values: 1 critical 2 high 3 low	.1.3.6.1.4.1.2076.103.1.3.1.6
fsPethPsPortPowerMode This object controls the power mode configured by the user. It is port dependant, based on the capabilities of the port. 802d3 is standards based PoE, passive-24v is 24V passive PoE (no detection, no classification), pa…	Enumerationr/w Enumerated Values: 1 std802d3 2 passive-24v 3 passive-54v 4 force-power	.1.3.6.1.4.1.2076.103.1.3.1.7
fsPethPsPortPowerModeDynamic This objects informs if a power mode has been dynamically changed on a port via the auto-detect mechanism.	Enumeration Enumerated Values: 0 nonDynamic 1 dynamic	.1.3.6.1.4.1.2076.103.1.3.1.8