ARICENT-PIMCMN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
14
Rows
14
Columns
241
.1.3.6.1.4.1.2076.111.1.2.1 · 1 row entry · 55 columns
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsPimCmnInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-PIMCMN-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-PIMCMN-MIB::fsPimCmnInterfaceTable'
The (conceptual) table listing the router's PIM interfaces.
IGMP and PIM are enabled on all interfaces listed in this
table.
fsPimCmnInterfaceEntry row .1.3.6.1.4.1.2076.111.1.2.1.1
An entry (conceptual row) in the fsPimCmnInterfaceTable.
Column Syntax OID
The ifIndex value of this PIM interface.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.2076.111.1.2.1.1.1
The IP address type of the PIM Interface for which this entry
contains information.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2076.111.1.2.1.1.2
This object is the component Id of the component to which the
interface belongs to
Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.2076.111.1.2.1.1.3
The DR priority value configured for Hello message for that
router per interface
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.4
The hold time configured for the Hello message for that
router per interface
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.2076.111.1.2.1.1.5
The LanPruneDelayPresent bit configured for the router per
interface
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.2076.111.1.2.1.1.6
The LanPruneDelayPresent bit configured for the router per
interface
millisecondsInteger32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.2076.111.1.2.1.1.7
The Override Interval configured for the router per interface
millisecondsInteger32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.2076.111.1.2.1.1.8
The Generation identifier of the router. This is used by
neighbour routers to quickly detect router reboot and
synchronize RP-Set information and forwarding states by triggering
Bootstrap and Join/…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.1.1.9
The interface suppression period
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.1.1.10
The interface Administrative Status
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.1.1.11
This indicates this interface is border interface or not,
1-- border interface, 0(default value)-- Normal interface.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.1.1.12
The minimum interval that must transpire between two
successive Grafts sent by a router. This object corresponds
to the 'Graft_Retry_Period' timer value defined in the
PIM-DM specification. This object is used only by…
secondsUnsigned32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.2076.111.1.2.1.1.13
Evaluates to TRUE if all routers on this interface are
using the State Refresh option. This object is used only by
PIM-DM.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2076.111.1.2.1.1.14
The datagram TTL threshold for the interface. Any IP
multicast datagrams with a TTL less than this threshold will
not be forwarded out the interface. The default value of 0
means all multicast packets are forwarded out …
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.2076.111.1.2.1.1.15
The routing protocol running on this interface.
IANA-RTPROTO-MIBIANAipMRouteProtocol
Type Values:
1other
2local
3netmgmt
4dvmrp
5mospf
6pimSparseDense
7cbt
8pimSparseMode
9pimDenseMode
10igmpOnly
11bgmp
12msdp
.1.3.6.1.4.1.2076.111.1.2.1.1.16
The rate-limit, in kilobits per second, of forwarded
multicast traffic on the interface. A rate-limit of 0
indicates that no rate limiting is done.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.1.1.17
The number of octets of multicast packets that have arrived
on the interface, including framing characters. This object
is similar to ifInOctets in the Interfaces MIB, except that
only multicast packets are counted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.18
The number of octets of multicast packets that have been
sent on the interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.19
The number of octets of multicast packets that have arrived
on the interface, including framing characters. This object
is a 64-bit version of fsPimCmnInterfaceInMcaestOctets. It
is similar to ifHCInOctets in the Inte…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2076.111.1.2.1.1.20
The number of octets of multicast packets that have been
sent on the interface. This object is a 64-bit version of
fsPimCmnInterfaceOutMcastOctets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2076.111.1.2.1.1.21
This object is the component Id List of the components which are
associated with this interface
CompListr/w .1.3.6.1.4.1.2076.111.1.2.1.1.22
This object displays the number of DF Offer packets sent by an interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.23
This object displays the number of DF Offer packets received on an interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.24
This object displays the number of DF winner packets sent by an interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.25
This object displays the number of DF winner packets received on an interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.26
This object displays the number of DF Backoff packets sent per interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.27
This object displays the number of DF Backoff packets Received per interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.28
This object displays the number of DF pass packets sent per interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.29
This object displays the number of DF pass packets received on an interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.30
This object displays the number of packets received on an interface with incorrect checksum
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.31
This object displays the number of packets received on an interface with incorrect PIM packet type
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.32
This object displays the number of packets received on an interface with incorrect DF subtype
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.33
This object displays the number of packets dropped due to Authentication Failure
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.34
This object displays the number of PIM control packets received on an interface from non-neighbors
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.35
This object displays the number of Join and Prune packets received on an RPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.36
This object displays the number of (*,G) join and prune packets for which there is no RP in that specified group(G)
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.37
This object displays the number of (*,G) join and prune packets with wrong RP information in that group(G)
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.38
This object displays the number of (S,G) join packets received on an interface whose group range is in SSM Group range
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.39
This object displays the number of (*,G) or (S,G) join packets received on an interface whose group is configured as Bidir group
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.40
This object displays the number of hello packtes received on an interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.41
This object displays the number of hello packets sent by an interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.42
This object displays the number of join/prune packets received on an interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.43
This object displays the number of join/prune packets sent by an interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.44
This object displays the number of assert packets received on an interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.45
This object displays the number of assert packets sent by an interfcace
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.46
This object displays the number of graft packets received on an interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.47
This object displays the number of graft packets sent by an interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.48
This object displays the number of graft ACK packets received on an interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.49
This object displays the number of graft ACK packets sent by an interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.50
This object displays the number of packets with packet length error
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.51
This object displays the number of bad version packets
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.53
This object displays the number of packets sent from the interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.54
This object displays the interface connected to a non-PIM Domain
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.1.1.55
This object displays the number of join packets discarded on an interface whose group range is in SSM Group range
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.1.1.56

fsPimCmnNeighborTable

table deprecated
.1.3.6.1.4.1.2076.111.1.2.2 · 1 row entry · 13 columns
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsPimCmnNeighborTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-PIMCMN-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-PIMCMN-MIB::fsPimCmnNeighborTable'
The (conceptual) table listing the router's PIM neighbors.
This table has been superseded by fsPimCmnNeighborExtTable.
This table may be used as long as two neighbors on different
interfaces do not have the same IPv6 link-local address.
fsPimCmnNeighborEntry row .1.3.6.1.4.1.2076.111.1.2.2.1
An entry (conceptual row) in the fsPimCmnNeighborTable.
Column Syntax OID
The component Id of this neighbor table
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.2076.111.1.2.2.1.1
The address Type of the PIM neighbor for which this entry
contains information.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2076.111.1.2.2.1.2
The IP address of the PIM neighbor for which this entry
contains information.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.2.1.3
The value of ifIndex for the interface used to reach this
PIM neighbor.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.2.1.4
The time since this PIM neighbor (last) became a neighbor
of the local router.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.2.1.5
The minimum time remaining before this PIM neighbor will be
aged out.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.2.1.6
The Generation identifier of the router. This is used by
neighbour routers to quickly detect router reboot and synchronize
RP-Set information and forwarding states by triggering Bootstrap
and Join/Prune messages to the …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.2.1.7
The LanDelay configured for this PIM neighbor
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.2.1.8
The DR priority value configured for this PIM neighbor
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.2.1.9
The Override Interval configured for this PIM neighbor
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.2.1.10
Evaluates to TRUE if this neighbor is using the State
Refresh Capable option. This object is used only by
PIM-DM.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2076.111.1.2.2.1.11
Evaluates to TRUE if this neighbor is RPF Vector Capable.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2076.111.1.2.2.1.12
Evaluates to TRUE if this neighbor is Bidir-PIM Capable.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2076.111.1.2.2.1.13
.1.3.6.1.4.1.2076.111.1.2.3 · 1 row entry · 32 columns
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsPimCmnIpMRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-PIMCMN-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-PIMCMN-MIB::fsPimCmnIpMRouteTable'
The (conceptual) table listing PIM multicast routing information
fsPimCmnIpMRouteEntry row .1.3.6.1.4.1.2076.111.1.2.3.1
An entry (conceptual row) in the fsPimCmnIpMRouteTable. There
is one entry for each incoming interface running PIM
Column Syntax OID
The component Id of this table
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.2076.111.1.2.3.1.1
The IP family in which the route belongs to.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2076.111.1.2.3.1.2
The IP multicast group address for which this entry
contains multicast routing information.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.3.1.3
The network address which when combined with the
corresponding value of ipMRouteSourceMask identifies the
sources for which this entry contains multicast routing
information.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.3.1.4
The network mask which when combined with the corresponding
value of ipMRouteSource identifies the sources for which
this entry contains multicast routing information.
Integer32
Constraints:
range: 0-128
.1.3.6.1.4.1.2076.111.1.2.3.1.5
The address of the upstream neighbor (e.g., RPF neighbor)
from which IP datagrams from these sources to this multicast
address are received.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.3.1.6
The value of ifIndex for the interface on which IP
datagrams sent by these sources to this multicast address
are received.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.3.1.7
The time since the multicast routing information
represented by this entry was learned by the router.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.3.1.8
The number of packets which this router has received from
these sources and addressed to this multicast group
address.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.3.1.9
The time remaining before the router changes its upstream
neighbor back to its RPF neighbor. This timer is called the
Assert timer in the PIM Sparse and Dense mode specification.
A value of 0 indicates that no Assert ha…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.3.1.10
The metric advertised by the assert winner on the upstream
interface, or 0 if no such assert is in received.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.3.1.11
The preference advertised by the assert winner on the
upstream interface, or 0 if no such assert is in effect.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.3.1.12
The value of the RPT-bit advertised by the assert winner on
the upstream interface, or false if no such assert is in
effect.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2076.111.1.2.3.1.13
This object describes PIM-specific Timer flags related to a
Multicast Route Entry. If the bit is 1 indicates that timer
is started for that entry. The bits corresponding to the
timers are as follows:
0 - JP Suppressi…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.3.1.14
This object describes PIM-specific flags related to a
multicast state entry. See the PIM Sparse Mode
specification for the meaning of the RPT and SPT bits.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.3.1.15
Whether the local router has pruned itself from the tree.
This corresponds to the state of the upstream prune (S,G)
state machine in the PIM-DM specification. This object is
used only by PIM-DM.
Enumeration
Enumerated Values:
1forwarding
2ackpending
3pruned
.1.3.6.1.4.1.2076.111.1.2.3.1.16
The time remaining before the local router may send a (S,G)
Prune message on pimSGRPFIfIndex. This timer is called the
(S,G) Prune Limit Timer in the PIM-DM specification. This
object is zero if the timer is not runni…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.3.1.17
Whether the router is an originator for an (S,G) message
flow. This corresponds to the state of the per-(S,G)
Originator state machine in the PIM-DM specification. This
object is used only by PIM-DM.
Enumeration
Enumerated Values:
1notOriginator
2originator
.1.3.6.1.4.1.2076.111.1.2.3.1.18
If pimSGOriginatorState is 'originator', this is the time
remaining before the local router reverts to a notOriginator
state. Otherwise, this is zero. This timer is called the
Source Active Timer in the PIM-DM specifi…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.3.1.19
If pimSGOriginatorState is 'originator', this is the time
remaining before the local router sends a State Refresh
message. Otherwise, this is zero. This timer is called the
State Refresh Timer in the PIM-DM specificat…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.3.1.20
The minimum amount of time remaining before this entry will
be aged out.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.3.1.21
The number of packets which this router has received from
these sources and addressed to this multicast group address,
which were dropped because they were not received on the
interface indicated by fsPimCmnIpMRouteInIf…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.3.1.22
The number of octets contained in IP datagrams which were
received from these sources and addressed to this multicast
group address, and which were forwarded by this router.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.3.1.23
The multicast routing protocol via which this multicast
forwarding entry was learned.
IANA-RTPROTO-MIBIANAipMRouteProtocol
Type Values:
1other
2local
3netmgmt
4dvmrp
5mospf
6pimSparseDense
7cbt
8pimSparseMode
9pimDenseMode
10igmpOnly
11bgmp
12msdp
.1.3.6.1.4.1.2076.111.1.2.3.1.24
The routing mechanism via which the route used to find the
upstream or parent interface for this multicast forwarding
entry was learned. Inclusion of values for routing
protocols is not intended to imply that those pro…
IANA-RTPROTO-MIBIANAipRouteProtocol
Type Values:
1other
2local
3netmgmt
4icmp
5egp
6ggp
7hello
8rip
9isIs
10esIs
11ciscoIgrp
12bbnSpfIgp
13ospf
14bgp
15idpr
16ciscoEigrp
17dvmrp
18rpl
19dhcp
20ttdp
.1.3.6.1.4.1.2076.111.1.2.3.1.25
The address portion of the route used to find the upstream
or parent interface for this multicast forwarding entry.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.3.1.26
The mask associated with the route used to find the upstream
or parent interface for this multicast forwarding entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.3.1.27
Route type
Enumeration
Enumerated Values:
1unicast
2multicast
.1.3.6.1.4.1.2076.111.1.2.3.1.28
The number of octets contained in IP datagrams which were
received from these sources and addressed to this multicast
group address, and which were forwarded by this router.
This object is a 64-bit version of fsPimCmnIp…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2076.111.1.2.3.1.29
This object is the Outgoing Interface List of the mroute
Q-BRIDGE-MIBPortList .1.3.6.1.4.1.2076.111.1.2.3.1.30
It shows the RPF vector Address to reach the actual destination:
either RP for creating (*,G) entry,
multicast Source for creating (S,G) entry.This Vector is stored
from the received Join/Prune Packet.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.3.1.31
The value shows the PIM mode of the group present
in the Mroute entry
Enumeration
Enumerated Values:
1dm
2sm
3ssm
4bidir
.1.3.6.1.4.1.2076.111.1.2.3.1.32
.1.3.6.1.4.1.2076.111.1.2.4 · 1 row entry · 13 columns
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsPimCmnIpMRouteNextHopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-PIMCMN-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-PIMCMN-MIB::fsPimCmnIpMRouteNextHopTable'
The (conceptual) table listing PIM information on the next hops
on outgoing interfaces for forwarding multicast datagrams
fsPimCmnIpMRouteNextHopEntry row .1.3.6.1.4.1.2076.111.1.2.4.1
An entry (conceptual row) in the fsPimCmnIpMRouteNextHopTable.
There is one entry per entry in the ipMRouteNextHopTable
whose interface is running PIM and whose
fsPimCmnIpMRouteNextHopState is pruned(1).
Column Syntax OID
The component Id for this table
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.2076.111.1.2.4.1.1
The IP family in which the Next hop address belongs to.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2076.111.1.2.4.1.2
The IP multicast group for which this entry specifies a
next-hop on an outgoing interface.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.4.1.3
The network address which when combined with the
corresponding value of fsPimCmnIpMRouteNextHopSourceMask identifies
the sources for which this entry specifies a next-hop on an
outgoing interface.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.4.1.4
The network mask which when combined with the corresponding
value of fsPimCmnIpMRouteNextHopSource identifies the sources for
which this entry specifies a next-hop on an outgoing interface
Integer32
Constraints:
range: 0-128
.1.3.6.1.4.1.2076.111.1.2.4.1.5
The ifIndex value of the interface for the outgoing
interface for this next-hop.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.2076.111.1.2.4.1.6
The address of the next-hop specific to this entry. For
most interfaces, this is identical to fsPimCmnIpMRouteNextHopGroup.
NBMA interfaces, however, may have multiple next-hop
addresses out a single outgoing interface.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.4.1.7
This object indicates why the downstream interface was
pruned, whether in response to a PIM prune message or due to
PIM Assert processing.
Enumeration
Enumerated Values:
0forwarding
1other
2prune
3assert
.1.3.6.1.4.1.2076.111.1.2.4.1.8
An indication of whether the outgoing interface and next-
hop represented by this entry is currently being used to
forward IP datagrams. The value 'forwarding' indicates it
is currently being used; the value 'pruned' i…
Enumeration
Enumerated Values:
1pruned
2forwarding
.1.3.6.1.4.1.2076.111.1.2.4.1.9
The time since the multicast routing information
represented by this entry was learned by the router
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.4.1.10
The minimum amount of time remaining before this entry will
be aged out. If ipMRouteNextHopState is pruned(1), the
remaining time until the prune expires and the state reverts
to forwarding(2). Otherwise, the remainin…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.4.1.11
The routing mechanism via which this next-hop was learned.
IANA-RTPROTO-MIBIANAipMRouteProtocol
Type Values:
1other
2local
3netmgmt
4dvmrp
5mospf
6pimSparseDense
7cbt
8pimSparseMode
9pimDenseMode
10igmpOnly
11bgmp
12msdp
.1.3.6.1.4.1.2076.111.1.2.4.1.12
The number of packets which have been forwarded using this
route.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.4.1.13
.1.3.6.1.4.1.2076.111.1.2.6 · 1 row entry · 8 columns
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsPimCmnCandidateRPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-PIMCMN-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-PIMCMN-MIB::fsPimCmnCandidateRPTable'
The (conceptual) table listing the IP multicast groups for
which the local router is to advertise itself as a
Candidate-RP when the value of fsPimCmnComponentCRPHoldTime is
non-zero.  If this table is empty, then the local router
will advertise itself as a Candidate-RP for all groups
(providing the value of fsPimCmnComponentCRPHoldTime is non-
zero).
fsPimCmnCandidateRPEntry row .1.3.6.1.4.1.2076.111.1.2.6.1
An entry (conceptual row) in the fsPimCmnCandidateRPTable.
Column Syntax OID
Component Id for this table
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.2076.111.1.2.6.1.1
The IP Address type in which the multicast group address,
and RP address belong to.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2076.111.1.2.6.1.2
The IP multicast group address which, when combined with
fsPimCmnCandidateRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a Candidate-RP.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.6.1.3
The multicast group address mask which, when combined with
fsPimCmnCandidateRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a Candidate-RP.
Integer32
Constraints:
range: 0-128
.1.3.6.1.4.1.2076.111.1.2.6.1.4
The (unicast) address of the interface which will be
advertised as a Candidate-RP.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.6.1.5
The priority of the interface which will be
advertised as a Candidate-RP.
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.2076.111.1.2.6.1.6
The status of this row, by which new entries may be
created, or old entries deleted from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2076.111.1.2.6.1.7
The value shows the PIM mode of the group for
which candidate RP is configured.
Enumerationr/w
Enumerated Values:
2sm
4bidir
.1.3.6.1.4.1.2076.111.1.2.6.1.8
.1.3.6.1.4.1.2076.111.1.2.7 · 1 row entry · 8 columns
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsPimCmnStaticRPSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-PIMCMN-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-PIMCMN-MIB::fsPimCmnStaticRPSetTable'
The (conceptual) table listing the IP multicast groups for
which the routers are available as the RP through static 
configuration.
fsPimCmnStaticRPSetEntry row .1.3.6.1.4.1.2076.111.1.2.7.1
An entry (conceptual row) in the pimStaticRPSetTable.
Column Syntax OID
Component Id for this table
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.2076.111.1.2.7.1.1
The IP address type in which the RP address belongs to.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2076.111.1.2.7.1.2
The IP multicast group address which, when combined with
pimStaticRPSetGroupMask, gives the group prefix for which this
entry contains information about the RP.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.7.1.3
The IP multicast group address mask which, when combined with
pimStaticRPSetGroupAddress, gives the group prefix for which this
entry contains information about the RP.
Integer32
Constraints:
range: 0-128
.1.3.6.1.4.1.2076.111.1.2.7.1.4
The address of the interface which will be
static configured as the RP.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.7.1.5
The status of this row, by which new entries may be
created, or old entries deleted from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2076.111.1.2.7.1.6
The value of the flag indicates if entry is configured
for static RP or embedded-RP.
disabled - entry configured for Static RP
enabled - entry configured for Embedded RP.
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.2076.111.1.2.7.1.7
The value shows the PIM mode of the group for
which static RP is configured.
Enumerationr/w
Enumerated Values:
2sm
4bidir
.1.3.6.1.4.1.2076.111.1.2.7.1.8
.1.3.6.1.4.1.2076.111.1.2.8 · 1 row entry · 3 columns
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsPimCmnComponentModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-PIMCMN-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-PIMCMN-MIB::fsPimCmnComponentModeTable'
The (conceptual) table listing the components modes).
fsPimCmnComponentModeEntry row .1.3.6.1.4.1.2076.111.1.2.8.1
An entry (conceptual row) in the fsPimCmnComponentModeTable.
Column Syntax OID
Component Id for this table
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.2076.111.1.2.8.1.1
This object indicates the mode of the component. A value of
1 indicates the component is running in DM mode and value of
2 indicated that the component is running in DM mode
Enumerationr/w
Enumerated Values:
1dense
2sparse
.1.3.6.1.4.1.2076.111.1.2.8.1.2
The value indicates the number of retries that can be made to
send the graft message
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.2076.111.1.2.8.1.3
.1.3.6.1.4.1.2076.111.1.2.9 · 1 row entry · 4 columns
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsPimCmnRegChkSumCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-PIMCMN-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-PIMCMN-MIB::fsPimCmnRegChkSumCfgTable'
The (conceptual) table listing RPs configured in CISCO Router
fsPimCmnRegChkSumCfgEntry row .1.3.6.1.4.1.2076.111.1.2.9.1
An entry (conceptual row) in the fsPimCmnRegChkSumCfgTable.
Column Syntax OID
Component Id for this table, This configuration is valid
only for a sparse mode component.
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.2076.111.1.2.9.1.1
The IP address type of this entry
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2076.111.1.2.9.1.2
The RP Address of the router to which the Register
checksum should be calculated.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.9.1.3
The status of this Row, by which new entries may be created
If the RowStatus is set, then the Register Message checksum
should be calculated including the data packet other wise for
for any RP address not part of this t…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.2076.111.1.2.9.1.4
.1.3.6.1.4.1.2076.111.1.2.10 · 1 row entry · 10 columns
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsPimCmnDFTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-PIMCMN-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-PIMCMN-MIB::fsPimCmnDFTable'
The (conceptual) table shows the Elected RP 
for the IP multicast group
fsPimCmnDFEntry row .1.3.6.1.4.1.2076.111.1.2.10.1
An entry (conceptual row) in the fsPimCmnDFTable.
Column Syntax OID
The IP family for which DF state to be retrieved.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2076.111.1.2.10.1.1
The (unicast) address of the Elected RP for which the DF state of the
interface to be retrieved.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.10.1.2
The ifIndex value of the interface for which the
DF state to be retrieved.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.2076.111.1.2.10.1.3
The DF state on the PIM interface for the Elected RP.
Enumeration
Enumerated Values:
1offer
2winner
3backoff
4lose
.1.3.6.1.4.1.2076.111.1.2.10.1.4
The (Link-Local) address of the DFWinner(the PIM neighbor)
for the Elected RP in the PIM interface
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.10.1.5
The time since this DF Winner got elected.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.10.1.6
The timer for DF election state, on the expiry of this timer
the existing DF state gets expired and changes to the appropriate state.
If the timer is not running, then the existing state is permanent, till
the occurenc…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.10.1.7
The winner metric advertised by the DF winner or zero if there is no
DF exist
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.10.1.8
The winner metric preference advertised by the DF winner
or zero if there is no DF exist
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.10.1.9
The DF election Message Count(MC) for the DF state of RPA (I)
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.2076.111.1.2.10.1.10
.1.3.6.1.4.1.2076.111.1.2.11 · 1 row entry · 8 columns
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsPimCmnElectedRPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-PIMCMN-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-PIMCMN-MIB::fsPimCmnElectedRPTable'
The (conceptual) table shows the Elected RP 
for the IP multicast group
fsPimCmnElectedRPEntry row .1.3.6.1.4.1.2076.111.1.2.11.1
An entry (conceptual row) in the fsPimCmnElectedRPTable.
Column Syntax OID
Component Id for this table
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.2076.111.1.2.11.1.1
The IP Address type in which the multicast group address,
and RP address belong to.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2076.111.1.2.11.1.2
The IP multicast group address for which
the Elected RP to be identified.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.11.1.3
The multicast group address mask which, when combined with
fsPimCmnElectedRPGroupMask, identifies a group prefix for which
Elected-RP to be identified.
Integer32
Constraints:
range: 0-128
.1.3.6.1.4.1.2076.111.1.2.11.1.4
The (unicast) address of the interface which is
Elected as RP for the IP multicast Group address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.11.1.5
The priority of the interface which is
Elected as an RP for the IP multicast group address.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.2076.111.1.2.11.1.6
The HoldTime of the Elected RP for the IP multicast group address.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.2076.111.1.2.11.1.7
This object displays the up time of the Elected RP for the IP multicast group address.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.2076.111.1.2.11.1.8
.1.3.6.1.4.1.2076.111.1.2.12 · 1 row entry · 13 columns
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsPimCmnNeighborExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-PIMCMN-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-PIMCMN-MIB::fsPimCmnNeighborExtTable'
The extended (conceptual) table listing the router's PIM Neighbors. 
This table differs from fsPimCmnNeighborTable as it has 
fsPimCmnNeighborExtIfIndex as an index instead of the Component ID. This
 is because in IPv6, two neighbors on different interfaces can have the 
same link-local address. A Component ID List is added as an interface 
can be associated with multiple components.
fsPimCmnNeighborExtEntry row .1.3.6.1.4.1.2076.111.1.2.12.1
An entry (conceptual row) in the fsPimCmnNeighborExtTable.
Column Syntax OID
The value of ifIndex for the interface used to reach this
PIM Neighbor.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.2076.111.1.2.12.1.1
The address Type of the PIM Neighbor for which this entry
contains information.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2076.111.1.2.12.1.2
The IP address of the PIM Neighbor for which this entry
contains information.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.12.1.3
The components associated with the interface on which the PIM
neighbor for this entry is found.
CompList .1.3.6.1.4.1.2076.111.1.2.12.1.4
The time since this PIM Neighbor (last) became a Neighbor
of the local router.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.12.1.5
The minimum time remaining before this PIM Neighbor will be
aged out.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.12.1.6
The Generation identifier of the router. This is used by
neighbour routers to quickly detect router reboot and synchronize
RP-Set information and forwarding states by triggering Bootstrap
and Join/Prune messages to the …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.12.1.7
The LanDelay configured for this PIM Neighbor
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.12.1.8
The DR priority value configured for this PIM Neighbor
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.12.1.9
The Override Interval configured for this PIM Neighbor
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.12.1.10
Evaluates to TRUE if this Neighbor is using the State
Refresh Capable option. This object is used only by
PIM-DM.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2076.111.1.2.12.1.11
Evaluates to TRUE if this Neighbor is RPF Vector Capable.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2076.111.1.2.12.1.12
Evaluates to TRUE if this Neighbor is Bidir-PIM Capable.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2076.111.1.2.12.1.13
.1.3.6.1.4.1.2076.111.1.2.13 · 1 row entry · 35 columns
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsPimCmnIpGenMRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-PIMCMN-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-PIMCMN-MIB::fsPimCmnIpGenMRouteTable'
The table list the PIM multicast routing information in Bidir Mode
fsPimCmnIpGenMRouteEntry row .1.3.6.1.4.1.2076.111.1.2.13.1
This object specifies an entry (conceptual row) in the fsPimCmnIpGenMRouteTable.
One entry is listed for incoming interface on which PIM is enabled
Column Syntax OID
This object displays the component Id of fsPimCmnIpGenMRouteTable
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.2076.111.1.2.13.1.1
This object displays the The IP family on which the route is present
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2076.111.1.2.13.1.2
This object displays the The IP multicast group address
for which the specified entry contain multicast routing information
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.13.1.3
This object displays the network mask, when combined with the corresponding
value of ipMRouteGroup identifies the groups for which the
entry contains multicast routing information
Integer32
Constraints:
range: 0-128
.1.3.6.1.4.1.2076.111.1.2.13.1.4
This object displays the network address when combined with the
corresponding value of ipMRouteSourceMask identifies the
sources for which the entry contains multicast routing
information
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.13.1.5
This object displays the network mask when combined with the corresponding
value of ipMRouteSource identifies the sources for which
the entry contains multicast routing information
Integer32
Constraints:
range: 0-128
.1.3.6.1.4.1.2076.111.1.2.13.1.6
This object displays the address of the upstream neighbor
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.13.1.7
This object displays the interface index value on which IP
packets are sent to the multicast group address
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.13.1.8
This object displays the time between the multicast routing information
learnt by the router
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.13.1.9
This object displays the number of packets the router has received
by the multicast group address
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.13.1.10
This object displays the assert timer value which is the time remaining between the router
changing its upstream neighbor back to RPF neighbor. This is set only when PIM mode
is set to either Sparse and or Dense mode.…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.13.1.11
This object displays the metric advertised by the assert winner on the upstream
interface, or 0 if no assert is received.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.13.1.12
This object displays the preference advertised by the assert winner on the
upstream interface, or 0 if no assert is in effect.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.13.1.13
This object displays RPT-bit value advertised by the assert winner on
the upstream interface, else false is displayed
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2076.111.1.2.13.1.14
This object displays the PIM-specific timer flags related to a
Multicast Route Entry. If the bit is 1, it indicates that timer
is started for the specific entry. The bits corresponding to the
timers are as follows:
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.13.1.15
This object displays the PIM-specific flags related to a
multicast state entry
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.13.1.16
This object displays whether the local router has pruned itself from the PIM dense tree.
This corresponds to the state of the upstream prune (S,G)
state machine in the PIM-DM specification. This object is
used only wh…
Enumeration
Enumerated Values:
1forwarding
2ackpending
3pruned
.1.3.6.1.4.1.2076.111.1.2.13.1.17
This object displays the time till the local router sends a (S,G)
prune message on pimSGRPFIfIndex. Zero is displayed if the timer is not running.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.13.1.18
This object displays whether the router is the source for the (S,G) message
flow. This object is used only when PIM mode is set to dense mode
Enumeration
Enumerated Values:
1notOriginator
2originator
.1.3.6.1.4.1.2076.111.1.2.13.1.19
If pimSGOriginatorState is displayed as 'originator', the active timer is the time
period between the local router changes to notOriginator state.
Otherwise, this is zero. This object is used only when PIM mode is…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.13.1.20
If pimSGOriginatorState is displayed as 'originator', then the state refresh timer is the time
taken to send a State Refresh message. This object is used only when PIM mode is set to Dense mode
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.13.1.21
This object displays whether minimum amount of time before this entry will
is timed out
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.13.1.22
This object displays the number of packets which this router has received from
the multicast source and addressed to this multicast group address,
which were dropped as they were not received on the
interface specifi…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.13.1.23
This object displays the number of octets contained in IP packets which were
received from the multicast sources and destined to this multicast
group address
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.13.1.24
This object displays the multicast routing protocol through which this multicast
forwarding entry is learned
IANA-RTPROTO-MIBIANAipMRouteProtocol
Type Values:
1other
2local
3netmgmt
4dvmrp
5mospf
6pimSparseDense
7cbt
8pimSparseMode
9pimDenseMode
10igmpOnly
11bgmp
12msdp
.1.3.6.1.4.1.2076.111.1.2.13.1.25
This object displays the routing mechanism through which the route used to find the
upstream or parent interface for this multicast forwarding
entry is learned
IANA-RTPROTO-MIBIANAipRouteProtocol
Type Values:
1other
2local
3netmgmt
4icmp
5egp
6ggp
7hello
8rip
9isIs
10esIs
11ciscoIgrp
12bbnSpfIgp
13ospf
14bgp
15idpr
16ciscoEigrp
17dvmrp
18rpl
19dhcp
20ttdp
.1.3.6.1.4.1.2076.111.1.2.13.1.26
This object displays the address portion of the route used to find the upstream
or parent interface for this multicast forwarding entry.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.13.1.27
This object displays the The mask associated with the route which is used to find the upstream
or parent interface for this multicast forwarding entry
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.13.1.28
This object displays the multicast route type.
Enumeration
Enumerated Values:
1unicast
2multicast
.1.3.6.1.4.1.2076.111.1.2.13.1.29
This object displays the number of octets present in the IP packets which were
received from multicast sources and addressed to this multicast
group address.
This object is a 64-bit version of fsPimCmnIpGenMRouteOctets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2076.111.1.2.13.1.30
This object displays the outgoing interface list of the mroute
Q-BRIDGE-MIBPortList .1.3.6.1.4.1.2076.111.1.2.13.1.31
This object displays the RPF vector address to reach the actual destination:
either RP for creating (*,G) entry or ,
multicast Source for creating (S,G) entry. This vector address is obtained
from the received join/pr…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.13.1.32
This object displays the PIM mode of the group present
in the Mroute entry
Enumeration
Enumerated Values:
1dm
2sm
3ssm
4bidir
.1.3.6.1.4.1.2076.111.1.2.13.1.33
This object displays the route type for the group.This could be S,G or *,G or *,*,RP.
Enumeration
Enumerated Values:
0default
1sg
2sgrpt
4starg
8ssrp
.1.3.6.1.4.1.2076.111.1.2.13.1.34
This object displays the NP status of the mroute entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.13.1.35
.1.3.6.1.4.1.2076.111.1.2.14 · 1 row entry · 15 columns
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsPimCmnIpGenMRouteNextHopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-PIMCMN-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-PIMCMN-MIB::fsPimCmnIpGenMRouteNextHopTable'
This table lists the PIM information on the next hops 
on outgoing interfaces for forwarding multicast packets
fsPimCmnIpGenMRouteNextHopEntry row .1.3.6.1.4.1.2076.111.1.2.14.1
This object specifies an entry in the in the fsPimCmnIpGenMRouteNextHopTable.
There is an entry in the ipMRouteNextHopTable with interface is running in PIM and
fsPimCmnIpGenMRouteNextHopState is pruned(1)
Column Syntax OID
This object displays the component Id in the next-hop table
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.2076.111.1.2.14.1.1
This object displays the IP family of theNext hop address .
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2076.111.1.2.14.1.2
This object displays the next-hop on an outgoing interface for the IP multicast group
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.14.1.3
This object displays the network mask length of the multicast group present in the next hop table
Integer32
Constraints:
range: 0-128
.1.3.6.1.4.1.2076.111.1.2.14.1.4
This object displays the network source address present in the next hop table
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.14.1.5
This object displays the network mask length of the multicast source present in the next hop table
Integer32
Constraints:
range: 0-128
.1.3.6.1.4.1.2076.111.1.2.14.1.6
This object displays the interface index present in the next hop table
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.2076.111.1.2.14.1.7
This object displays the address of the next-hop specific to this entry . For
most interfaces, this is identical to fsPimCmnIpGenMRouteNextHopGroup but for .
NBMA interfaces may have multiple next-hop
addresses for an …
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2076.111.1.2.14.1.8
This object indicates the reason why the downstream interface was
pruned, whether in response to a PIM prune message or due to
PIM Assert processing
Enumeration
Enumerated Values:
0forwarding
1other
2prune
3assert
.1.3.6.1.4.1.2076.111.1.2.14.1.9
This object indicates whether the outgoing interface and next-
hop represented by this entry is currently being used to
forward IP packets. The value 'forwarding' indicates it
is currently being used; the value 'prun…
Enumeration
Enumerated Values:
1pruned
2forwarding
.1.3.6.1.4.1.2076.111.1.2.14.1.10
This object displays the time since the multicast routing information
learned by the router for the corresponding entry
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.14.1.11
This object displays the minimum amount of time remaining for this entry to be timed out.
The calculation of expiry time varies as follows;
1. If ipMRouteNextHopState is set pruned(1), the
remaining time until till the …
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.14.1.12
This object displays the routing mechanism through which this next-hop is learned
IANA-RTPROTO-MIBIANAipMRouteProtocol
Type Values:
1other
2local
3netmgmt
4dvmrp
5mospf
6pimSparseDense
7cbt
8pimSparseMode
9pimDenseMode
10igmpOnly
11bgmp
12msdp
.1.3.6.1.4.1.2076.111.1.2.14.1.13
This object displays the number of packets which are forwarded using this
route
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2076.111.1.2.14.1.14
This object displays the NP programming status of the next hop interface
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.14.1.15
.1.3.6.1.4.1.2076.111.1.2.15 · 1 row entry · 24 columns
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsPimCmnContextExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-PIMCMN-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-PIMCMN-MIB::fsPimCmnContextExtTable'
Provides status settings based on context
fsPimCmnContextExtEntry row .1.3.6.1.4.1.2076.111.1.2.15.1
An entry in the fsPimCmnContextExtTable
Column Syntax OID
Context ID for this table entry
Integer32
Constraints:
range: 0-256
.1.3.6.1.4.1.2076.111.1.2.15.1.1
The default interval at which periodic PIM Join/Prune
messages are to be sent
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.15.1.2
The version number of the PIM protocol in the router
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.2076.111.1.2.15.1.3
The threshold of data rate for any group when exceeded,
source specific counters are initiated for that particular
group. It is based on number of bits per sec. To initiate
SPT switching counter, this threshold MUST …
Integer32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.2076.111.1.2.15.1.4
The threshold of data rate for any source when exceeded,
switching to Shortest Path Tree is initiated. It is based
on number of bits per sec. To switch to SPT, this threshold
MUST be configured
Integer32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.2076.111.1.2.15.1.5
The period (in seconds) over which the data rate
is to be monitored for initiating source specific
counting or initiating switch to shortest path tree.
Same period is used for monitoring data rate for
both source and gr…
Integer32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.2076.111.1.2.15.1.6
The threshold at which the RP initiates switching to
Source specific shortest path.It is based on number
of registered packets received. To switch to SPT, this
threshold MUST be configured
Integer32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.2076.111.1.2.15.1.7
The period (in seconds) over which RP monitors
register packets for switching to the source specific
shortest path tree. To switch to SPT, this period MUST
be configured
Integer32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.2076.111.1.2.15.1.8
The period (in seconds) over which RP monitors number of
register packets after sending the register stop message
to the source of the register message for rate limiting the
sending of register stop message
Integer32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.2076.111.1.2.15.1.9
The border bit which identifies the router as a
border router
Enumerationr/w
Enumerated Values:
1disable
2enable
.1.3.6.1.4.1.2076.111.1.2.15.1.10
The mode of the PIM-SM router (ssm_only or sm_ssm )
Enumerationr/w
Enumerated Values:
1ssmonly
2smssm
.1.3.6.1.4.1.2076.111.1.2.15.1.11
The flag indicating that static configuration of RP
is available
Enumerationr/w
Enumerated Values:
0disable
1enabled
.1.3.6.1.4.1.2076.111.1.2.15.1.12
The enabled status of IPv4 Multicast Routing by PIM
on this router
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.2076.111.1.2.15.1.13
The enabled status of IPv6 Multicast Routing by PIM
on this router.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.2076.111.1.2.15.1.14
Indicates whether to process and forward the state
Refresh message
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.2076.111.1.2.15.1.15
The interval between successive State Refresh messages
sent by an Originator. This timer period is called the
RefreshInterval in the PIM-DM specification. This object
is used only by PIM-DM. Minus one indicates that …
secondsInteger32r/w
Constraints:
range: -1--1
range: 4-100
.1.3.6.1.4.1.2076.111.1.2.15.1.16
The period of time after receiving a multicast message a
Originator router (directly connected to source) will
continue to send State Refresh Message
secondsUnsigned32r/w
Constraints:
range: 120-210
.1.3.6.1.4.1.2076.111.1.2.15.1.17
The status of IPv4 Multicast RPF Vector feature
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.2076.111.1.2.15.1.18
The status of Bidir-PIM Feature. Enabling/Disabling this
feature is applicable for both PIMv4 and PIMv6
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.2076.111.1.2.15.1.19
The time interval between the DF Election Offer
messages to be sent
millisecondsInteger32r/w
Constraints:
range: 1-20000000
.1.3.6.1.4.1.2076.111.1.2.15.1.20
The number of unanswered offers before the router
changes as the designated forwarder (DF)
Integer32r/w
Constraints:
range: 3-100
.1.3.6.1.4.1.2076.111.1.2.15.1.21
The status of Multicast Routing by PIM on this router
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.2076.111.1.2.15.1.22
Maximum IP route count
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.15.1.23
Current IP route count
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2076.111.1.2.15.1.24