ARICENT-OSPFV3-MIB Table View

The OSPFv3 Interface Table describes the  inter-
faces from the viewpoint of OSPFv3.

futOspfv3IfEntry row .1.3.6.1.4.1.2076.90.2.1

The OSPFv3 Interface Entry describes one inter-
face from the viewpoint of OSPFv3.

Indexes

futOspfv3IfIndex

Column	Syntax	OID
futOspfv3IfIndex The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2076.90.2.1.1
futOspfv3IfOperState This gives the Operational Status of the Interface.	Enumeration Enumerated Values: 1 operup 2 operdown 3 loopback 4 unloop	.1.3.6.1.4.1.2076.90.2.1.2
futOspfv3IfPassive This object is used to make the inteface as passive. If set to TRUE, then interface will be passive If set to FALSE then interface will be normal	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.90.2.1.3
futOspfv3IfNbrCount This gives the Total number of Neighbour's through that Interface.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.4
futOspfv3IfAdjCount This gives the Total number of Adjacencies through that Interface.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.5
futOspfv3IfHelloRcvd This gives the Total number of Hello packets received through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.6
futOspfv3IfHelloTxed This gives the Total number of Hello packets transmitted through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.7
futOspfv3IfHelloDisd This gives the Total number of Hello packets discarded through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.8
futOspfv3IfDdpRcvd This gives the Total number of Ddp packets received through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.9
futOspfv3IfDdpTxed This gives the Total number of Ddp packets transmitted through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.10
futOspfv3IfDdpDisd This gives the Total number of Ddp packets discarded through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.11
futOspfv3IfLrqRcvd This gives the Total number of Lrq packets received through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.12
futOspfv3IfLrqTxed This gives the Total number of Lrq packets transmitted through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.13
futOspfv3IfLrqDisd This gives the Total number of Lrq packets discarded through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.14
futOspfv3IfLsuRcvd This gives the Total number of Lsu packets received through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.15
futOspfv3IfLsuTxed This gives the Total number of Lsu packets transmitted through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.16
futOspfv3IfLsuDisd This gives the Total number of Lsu packets discarded through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.17
futOspfv3IfLakRcvd This gives the Total number of Lak packets received through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.18
futOspfv3IfLakTxed This gives the Total number of Lak packets transmitted through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.19
futOspfv3IfLakDisd This gives the Total number of Lak packets discarded on that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.20
futOspfv3IfLinkLSASuppression Specifies whether or not link LSA origination is suppressed for networks other than broadcast or NBMA. The object is set to value true (1) to suppress the origination.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.90.2.1.21
futOspfv3IfBfdState This object enables/disables BFD in a specific OSPFv3 interface. This object is set to enabled internally for particular interface entry, when futOspfv3BfdAllIfState is enabled. If futOspfv3BfdAllIfState…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.90.2.1.22
futOspfv3IfCryptoAuthType This object specifies the SHA crypto authentication type to be used on the interface	Enumerationr/w Enumerated Values: 1 sha1 3 sha256 4 sha384 5 sha512 6 none	.1.3.6.1.4.1.2076.90.2.1.23
futOspfv3IfCryptoAuthMode This object specifies the crypto authentication mode to be used on the interface	Enumerationr/w Enumerated Values: 1 full 2 transition 3 none	.1.3.6.1.4.1.2076.90.2.1.24
futOspfv3IfAuthTxed This object specifies the total number of Authentication Trailer packets transmitted on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.25
futOspfv3IfAuthRcvd This object specifies the total number of Authentication Trailer packets received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.26
futOspfv3IfAuthDisd This object specifies the Total number of Authentication Trailer packets discarded on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.90.2.1.27

A table of routing information.

futOspfv3RoutingEntry row .1.3.6.1.4.1.2076.90.3.1

The information regarding a single route.

Indexes

futOspfv3RouteDestType futOspfv3RouteDest futOspfv3RoutePfxLength futOspfv3RouteNextHopType futOspfv3RouteNextHop

Column	Syntax	OID
futOspfv3RouteDestType The prefix type of futOspfv3RouteDestType. Only IPv6 addresses are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2076.90.3.1.1
futOspfv3RouteDest The Desitnation IPv6 Address of this route.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.2076.90.3.1.2
futOspfv3RoutePfxLength Indicates the prefix length of the destination Address.	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.2076.90.3.1.3
futOspfv3RouteNextHopType The prefix type offutOspfv3RouteNextHopType. Only IPv6 addresses are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2076.90.3.1.4
futOspfv3RouteNextHop Next Hop IPv6 Address for this route. For direct routes it has the value ::0.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.2076.90.3.1.5
futOspfv3RouteType Type of the route	Enumeration Enumerated Values: 1 intraArea 2 interArea 3 type1External 4 type2External 5 type1ExternalNssa 6 type1ExternalNssa	.1.3.6.1.4.1.2076.90.3.1.6
futOspfv3RouteAreaId Area ID associated with the route	OSPF-MIBAreaID	.1.3.6.1.4.1.2076.90.3.1.7
futOspfv3RouteCost It is a Type 1 external metrics which is expressed in the same units as OSPF interface cost ie. in terms of the OSPF link state metric. If Type1 and Type2 cost are present, Type1 external metrics always take precedenc…	OSPF-MIBBigMetric Type Constraints: range: 0..16777215	.1.3.6.1.4.1.2076.90.3.1.8
futOspfv3RouteType2Cost Type 2 external metrics are configured with the cost greater than any path internal to the AS. Use of Type 2 external metrics assumes that routing between AS is the major cost of routing a packet, and eliminates the…	OSPF-MIBBigMetric Type Constraints: range: 0..16777215	.1.3.6.1.4.1.2076.90.3.1.9
futOspfv3RouteInterfaceIndex Interface Index associated with the route	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2076.90.3.1.10

Indicates whether for the specified address range
Type-7/Type-5 LSA will be aggregated or not generated.

futOspfv3AsExternalAggregationEntry row .1.3.6.1.4.1.2076.90.4.1

Supports configuration of Type-5,Type-7 Address Range specifying
whether for the configured range, Type-5,Type-7 LSA will be
generated or not, and if generated whether aggregation is performed.

Indexes

futOspfv3AsExternalAggregationNetType futOspfv3AsExternalAggregationNet futOspfv3AsExternalAggregationPfxLength futOspfv3AsExternalAggregationAreaId

Column	Syntax	OID
futOspfv3AsExternalAggregationNetType The prefix type of futOspfv3AsExternalAggregationNetType. Only IPv6 addresses are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2076.90.4.1.1
futOspfv3AsExternalAggregationNet The IPv6 address of the Net indicated by the range.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.2076.90.4.1.2
futOspfv3AsExternalAggregationPfxLength The prefix length that pertains to the range.	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.2076.90.4.1.3
futOspfv3AsExternalAggregationAreaId Refer to description in futOspfv3AsExternalAggregationEffect.	OSPF-MIBAreaID	.1.3.6.1.4.1.2076.90.4.1.4
futOspfv3AsExternalAggregationEffect Indicates whether Type-5/Type-7 will be aggregated or not generated for the specified range. When set to 'allowAll' (3) and associated areaId is 0.0.0.0 aggregated Type-5 are generated for the specified range. In addit…	Enumerationr/w Enumerated Values: 1 advertise 2 doNotAdvertise 3 allowAll 4 denyAll	.1.3.6.1.4.1.2076.90.4.1.5
futOspfv3AsExternalAggregationTranslation This when set to enabled, P Bit is set in the generated Type-7 LSA. When set disabled P Bit is clear in the generated Type-7 LSA for the range.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.90.4.1.6
futOspfv3AsExternalAggregationStatus This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.90.4.1.7

A table of routing information.

futOspfv3BRRouteEntry row .1.3.6.1.4.1.2076.90.5.1

The information regarding a single route.

Indexes

futOspfv3BRRouteDest futOspfv3BRRouteNextHopType futOspfv3BRRouteNextHop futOspfv3BRRouteDestType

Column	Syntax	OID
futOspfv3BRRouteDest Router Id of the destination router. ABR/ASBR entries will have Router Id as the destination network Id	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2076.90.5.1.1
futOspfv3BRRouteNextHopType The prefix type of futOspfv3BRRouteNextHopType. Only IPv6 addresses are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2076.90.5.1.2
futOspfv3BRRouteNextHop Next Hop IPv6 Address for this route. For direct routes it has the value ::0.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.2076.90.5.1.3
futOspfv3BRRouteDestType Type of the route. The route can be ABR route entry or ASBR route entry	Enumeration Enumerated Values: 2 areaBorder 3 asBoundary	.1.3.6.1.4.1.2076.90.5.1.4
futOspfv3BRRouteType Type of the route	Enumeration Enumerated Values: 1 intraArea 2 interArea	.1.3.6.1.4.1.2076.90.5.1.5
futOspfv3BRRouteAreaId Area ID associated with the route	OSPF-MIBAreaID	.1.3.6.1.4.1.2076.90.5.1.6
futOspfv3BRRouteCost The cost associated with the route	OSPF-MIBBigMetric Type Constraints: range: 0..16777215	.1.3.6.1.4.1.2076.90.5.1.7
futOspfv3BRRouteInterfaceIndex Interface Index associated with the route	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2076.90.5.1.8

A table describing the configuration of Metric Cost and Route
Type information to be applied to the routes learnt from the RTM.

futOspfv3RedistRouteCfgEntry row .1.3.6.1.4.1.2076.90.6.1

Information describing the configuration of single route entry.

Indexes

futOspfv3RedistRouteDestType futOspfv3RedistRouteDest futOspfv3RedistRoutePfxLength

Column	Syntax	OID
futOspfv3RedistRouteDestType The prefix type of futOspfv3RedistRouteDestType. Only IPv6 addresses are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2076.90.6.1.1
futOspfv3RedistRouteDest IPv6 Address of the Destination route.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.2076.90.6.1.2
futOspfv3RedistRoutePfxLength Prefix Length of the Destination route.	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.2076.90.6.1.3
futOspfv3RedistRouteMetric The Metric value applied to the route before it is adv. into the OSPFv3 Domain.	OSPF-MIBBigMetricr/w Type Constraints: range: 0..16777215	.1.3.6.1.4.1.2076.90.6.1.4
futOspfv3RedistRouteMetricType The Metric Type applied to the route before it is adv. into the OSPFv3 Domain	Enumerationr/w Enumerated Values: 3 type1External 4 type2External	.1.3.6.1.4.1.2076.90.6.1.5
futOspfv3RedistRouteTagType The Tag Type MIB object describes whether Tags will be automatically generated or will be manually configured. If tags are manually configured , the futOspfv3RedistRouteTag MIB has to be set with the Tag value needed.	Enumerationr/w Enumerated Values: 1 manual 2 automatic	.1.3.6.1.4.1.2076.90.6.1.6
futOspfv3RedistRouteTag The Route Tag in case the user configures a Manual option for the tags.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2076.90.6.1.7
futOspfv3RedistRouteStatus The variable dispalys the status of the entry.Setting it to 'invalid' has the effect of rendering it inoperative.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.90.6.1.8

A table describing the configuration of filtering for route map.

futOspfv3DistInOutRouteMapEntry row .1.3.6.1.4.1.2076.90.8.1.1

Information describing the filtering configuration of single entry.

Indexes

futOspfv3DistInOutRouteMapName futOspfv3DistInOutRouteMapType

Column	Syntax	OID
futOspfv3DistInOutRouteMapName Route map name.	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.2076.90.8.1.1.1
futOspfv3DistInOutRouteMapType Type of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out	Integer32 Constraints: range: 1-3	.1.3.6.1.4.1.2076.90.8.1.1.2
futOspfv3DistInOutRouteMapValue Distance value ( this will be unused for distribute list )	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2076.90.8.1.1.3
futOspfv3DistInOutRouteMapRowStatus The status of this row, by which new entries may be created, or old entries deleted from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.90.8.1.1.4

This table contains the neighbor Entry for Bfd

futOspfv3NeighborBfdEntry row .1.3.6.1.4.1.2076.90.11.1.1

This entry contains information describing Bfd neighbor state

Indexes

No indexes recorded

Column	Syntax	OID
futOspfv3NbrBfdState This object specifies the Neighbor Bfd state.It is a read-only object. It is enabled internally only when BFD is enabled for monitoring the neighbor IP path.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.90.11.1.1.1

This OSPF-V3 Interface Authentication Table describes the parameters
required for  cryptographic Authentication.

futOspfv3IfAuthEntry row .1.3.6.1.4.1.2076.90.12.1

This object describes one Authentication Key from the viewpoint of OSPF-V3.

Indexes

futOspfv3IfAuthIfIndex futOspfv3IfAuthKeyId

Column	Syntax	OID
futOspfv3IfAuthIfIndex This object specifies the interface index of OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2076.90.12.1.1
futOspfv3IfAuthKeyId This object identifies the secret key used to create the message digest appended to the OSPF-V3 packet.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2076.90.12.1.2
futOspfv3IfAuthKey This object identifies the secret key which is used to create the message digest appended to the OSPF-V3 packet.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2076.90.12.1.3
futOspfv3IfAuthKeyStartAccept This object specifies the time at which the router starts Accepting packets that have been created with the key. If the value is not set, then it will be taken as 0, The value 0 mapped to key creation time	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2076.90.12.1.4
futOspfv3IfAuthKeyStartGenerate This object specifies the time at which the router starts generating packets that have been created with the key. If the value is not set, then it will be taken as 0, The value 0 mapped to key creation time	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2076.90.12.1.5
futOspfv3IfAuthKeyStopGenerate This object specifies the time at which the router stops using the key for packets generation. If the value is not set, then it will be taken as infinite and displayed as 0 example, Tuesday May 26, 2015 at 1:30 PM shoul…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2076.90.12.1.6
futOspfv3IfAuthKeyStopAccept This object specifies the time at which the router stops using the key for packets Verification. If the value is not set, then it will be taken as infinite and displayed as 0 example, Tuesday May 26, 2015 at 1:30 PM sho…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2076.90.12.1.7
futOspfv3IfAuthKeyStatus This object identifies the status of the key.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.90.12.1.8

This OSPF-V3 Interface Authentication Table describes the parameters
required for cryptographic Authentication.

futOspfv3VirtIfAuthEntry row .1.3.6.1.4.1.2076.90.13.1

This object describes entry of one
Authentication Key from the viewpoint of OSPF-V3.

Indexes

futOspfv3VirtIfAuthAreaId futOspfv3VirtIfAuthNeighbor futOspfv3VirtIfAuthKeyId

Column	Syntax	OID
futOspfv3VirtIfAuthAreaId This object specifies the transit area that the virtual link traverses. By definition, this should not be 0.0.0.0.	OSPF-MIBAreaID	.1.3.6.1.4.1.2076.90.13.1.1
futOspfv3VirtIfAuthNeighbor This object specifies the Router ID of the Virtual Neighbor.	OSPF-MIBRouterID	.1.3.6.1.4.1.2076.90.13.1.2
futOspfv3VirtIfAuthKeyId This object identifies the secret key used to create the message digest appended to the OSPF-V3 packet.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2076.90.13.1.3
futOspfv3VirtIfAuthKey This object specifies the secret key which is used to create the message digest appended to the OSPF-V3 packet.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2076.90.13.1.4
futOspfv3VirtIfAuthKeyStartAccept This object specifies the time at which the router starts generating packets that have been created with the key. If the value is not set, then it will be taken as 0, The value 0 mapped to key creation time	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2076.90.13.1.5
futOspfv3VirtIfAuthKeyStartGenerate This object specifies the time at which the router starts generating packets that have been created with the key. If the value is not set, then it will be taken as 0, The value 0 mapped to key creation time	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2076.90.13.1.6
futOspfv3VirtIfAuthKeyStopGenerate This object specifies the time at which the router stops using the key for packets generation. If the value is not set, then it will be taken as infinite and displayed as 0 example, Tuesday May 26, 2015 at 1:30 PM shoul…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2076.90.13.1.7
futOspfv3VirtIfAuthKeyStopAccept This object specifies the time at which the router stops using the key for packets Verification. If the value is not set, then it will be taken as infinite and displayed as 2136-02-06,06:28:15, DateTime equivalent to ma…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2076.90.13.1.8
futOspfv3VirtIfAuthKeyStatus This object identifies the status of the key.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.90.13.1.9

This table holds the crypto authentication type.

futOspfv3VirtIfCryptoAuthEntry row .1.3.6.1.4.1.2076.90.14.1

This object describes the entry of the cryptographic authentication.

Indexes

No indexes recorded

Column	Syntax	OID
futOspfv3VirtIfCryptoAuthType This object specifies the SHA crypto authentication type to be used on the interface	Enumerationr/w Enumerated Values: 1 sha1 3 sha256 4 sha384 5 sha512 6 none	.1.3.6.1.4.1.2076.90.14.1.1
futOspfv3VirtIfCryptoAuthMode This object specifies the crypto authentication mode to be used on the interface for setting transition	Enumerationr/w Enumerated Values: 1 full 2 transition 3 none	.1.3.6.1.4.1.2076.90.14.1.2