ARICENT-MIVLAN-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
87

fsMIVlanBridgeInfoTable

table
.1.3.6.1.4.1.2076.138.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIVlanBridgeInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIVLAN-EXT-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIVLAN-EXT-MIB::fsMIVlanBridgeInfoTable' 
List of Tunneling related objects that can be configured
per Virtual Context in the system.
fsMIVlanBridgeInfoEntry row .1.3.6.1.4.1.2076.138.1.1.1
Virtual Context based Provider Bridge objects.
Indexes
Column Syntax OID
fsMIVlanContextId
Identifies a Virtual Context.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.138.1.1.1.1
fsMIVlanBridgeMode
This object indicates the Bridge mode of the switch.

Setting this to 'customerBridge' means that the switch will operate
as a 802.1Q VLAN Bridge.

Setting this to 'providerBridge' means tha…
Enumerationr/w
Enumerated Values:
1customerBridge
2providerBridge
3providerEdgeBridge
4providerCoreBridge
5providerBackoneICompBridge
6providerBackoneBCompBridge
7invalidBridgeMode
 .1.3.6.1.4.1.2076.138.1.1.1.2

fsMIVlanTunnelContextInfoTable

table
.1.3.6.1.4.1.2076.138.2.1 · 1 row entry · 13 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIVlanTunnelContextInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIVLAN-EXT-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIVLAN-EXT-MIB::fsMIVlanTunnelContextInfoTable' 
List of Tunneling related objects that can be configured
per Virtual Context in the system.
fsMIVlanTunnelContextInfoEntry row .1.3.6.1.4.1.2076.138.2.1.1
Virtual Context based Provider Bridge objects.
Indexes
Column Syntax OID
fsMIVlanTunnelBpduPri
Specifies the default User Priority for all the tunneled Layer 2
BPDUs received on tunnel ports per virtual context.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2076.138.2.1.1.1
fsMIVlanTunnelStpAddress
This object specifies the MAC address to be used for Customer STP BPDUs
tunneling. When STP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer BPDUs receive…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.138.2.1.1.2
fsMIVlanTunnelLacpAddress
This object specifies the MAC address to be used for LACP packets tunneling. When
LACP tunneling is enabled on a port, this MAC address will be
used as the destination MAC address of the customer LACP packets
received o…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.138.2.1.1.3
fsMIVlanTunnelDot1xAddress
This object specifies the MAC address to be used for Dot1x packets tunneling. When
Dot1x tunneling is enabled on a port, this MAC address will
be used as the the destination MAC address for the customer Dot1x
packets …
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.138.2.1.1.4
fsMIVlanTunnelGvrpAddress
The object specifies the MAC address to be used for Customer GVRP PDUs tunneling.
When GVRP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer GVRP PDUs
rece…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.138.2.1.1.5
fsMIVlanTunnelGmrpAddress
The MAC address to be used for GMRP PDUs tunneling. When GMRP
tunnelling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer GMRP PDUs
received over this port.
…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.138.2.1.1.6
fsMIVlanTunnelMvrpAddress
The object specifies the MAC address to be used for MVRP PDUs tunneling.
When MVRP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the received MVRP PDUs.
…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.138.2.1.1.7
fsMIVlanTunnelMmrpAddress
The object specifies the MAC address to be used for MMRP PDUs tunnelling.
When MMRP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the MMRP PDUs received
over this p…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.138.2.1.1.8
fsMIVlanTunnelElmiAddress
The object specifies the MAC address to be used for ELMI packets tunneling. When
ELMI tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the ELMI packets
received over th…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.138.2.1.1.9
fsMIVlanTunnelLldpAddress
This object specifies the MAC address to be used for LLDP packets tunneling. When
LLDP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the LLDP packets
received over t…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.138.2.1.1.10
fsMIVlanTunnelEcfmAddress
This object specifies the MAC address to be used for ECFM
packet tunneling. When ECFM tunneling is enabled on the port,
this MAC address will be used as destination MAC address of the
ECFM packets received over the p…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.138.2.1.1.11
fsMIVlanTunnelEoamAddress
This object specifies the MAC address to be used for EOAM packets
tunneling. When EOAM tunneling is enabled on the port, this
MAC address will be used as the the destination MAC address of
EOAM packets received over …
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.138.2.1.1.12
fsMIVlanTunnelIgmpAddress
This object specifies the MAC address to be used for IGMP packets
tunneling. When IGMP tunneling is enabled on the port, this
MAC address will be used as the destination MAC address of the
IGMP packets received over the…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.138.2.1.1.13

fsMIVlanTunnelTable

table
.1.3.6.1.4.1.2076.138.2.2 · 1 row entry · 2 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIVlanTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIVLAN-EXT-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIVLAN-EXT-MIB::fsMIVlanTunnelTable' 
This table contains information about the tunnel ports. A walk on 
this table will show only those interfaces that are configured for
tunneling.
This table is supported only when the Bridge is configured in Provider
Bridge (Q-in-Q) mode.
fsMIVlanTunnelEntry row .1.3.6.1.4.1.2076.138.2.2.1
Entry indicating the tunnel information of the port.
Indexes
Column Syntax OID
fsMIVlanPort
The Index value of the port in the system for which this entry
applies. The maximum index value of the port is defined by the
system.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2076.138.2.2.1.1
fsMIVlanTunnelStatus
Indicates whether Tunnelling is enabled or disabled on this port.
fsMIVlanTunnelStatus can be set to `enabled` if and only if the
Bridge mode is set to be `Provider Bridge Mode / Customer Bridge Mode`
and Future VLAN po…
ARICENTP-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.138.2.2.1.2

fsMIVlanTunnelProtocolTable

table
.1.3.6.1.4.1.2076.138.2.3 · 1 row entry · 13 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIVlanTunnelProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIVLAN-EXT-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIVLAN-EXT-MIB::fsMIVlanTunnelProtocolTable' 
This table contains information about the handling (Tunnel/Peer/
Discard)of customer Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/
IGMP/MVRP/MMRP/ELMI and LLDP) inside service provider network.
fsMIVlanTunnelProtocolEntry row .1.3.6.1.4.1.2076.138.2.3.1
Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2
protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP/MMRP/ELMI and LLDP) on this
port.

Tunnel Status cannot be set to `tunnel/discard`, if the protoc…
Indexes
Column Syntax OID
fsMIVlanTunnelProtocolDot1x
The object to specify whether to peer/tunnel/discard the Dot1x packets
received on this port.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.138.2.3.1.1
fsMIVlanTunnelProtocolLacp
The object to specify whether to peer/tunnel/discard the LACP packets
received on this port.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.138.2.3.1.2
fsMIVlanTunnelProtocolStp
The object to specify whether to peer/tunnel/discard the STP packets
received on this port.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.138.2.3.1.3
fsMIVlanTunnelProtocolGvrp
The object to specify whether to peer/tunnel/discard the GVRP packets
received on this port.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.138.2.3.1.4
fsMIVlanTunnelProtocolGmrp
The object to specify whether to peer/tunnel/discard the GMRP packets
received on this port.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.138.2.3.1.5
fsMIVlanTunnelProtocolIgmp
The object to specify whether to peer/tunnel/discard the IGMP packets
received on this port.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.138.2.3.1.6
fsMIVlanTunnelProtocolMvrp
The object to specify whether to peer/tunnel/discard the MVRP packets
received on this port.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.138.2.3.1.7
fsMIVlanTunnelProtocolMmrp
The object to specify whether to peer/tunnel/discard the MMRP packets
received on this port.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.138.2.3.1.8
fsMIVlanTunnelProtocolElmi
The object to specify whether to peer/tunnel/discard the ELMI packets
received on this port.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.138.2.3.1.9
fsMIVlanTunnelProtocolLldp
The object to specify whether to peer/tunnel/discard the LLDP packets
received on this port.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.138.2.3.1.10
fsMIVlanTunnelProtocolEcfm
The object to specify whether to peer/tunnel/discard the ECFM packets
received on this port.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.138.2.3.1.11
fsMIVlanTunnelOverrideOption
This object specifies whether Override option is enabled or disabled on
the Port.
If this option is set to enable, Tunnel status for all the Layer 2 control
protocol will be referred from port Table.
If this option is…
ARICENTP-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.138.2.3.1.12
fsMIVlanTunnelProtocolEoam
This object specifies whether to peer or tunnel or discard the EOAM packets
received on the port.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.138.2.3.1.13

fsMIVlanTunnelProtocolStatsTable

table
.1.3.6.1.4.1.2076.138.2.4 · 1 row entry · 24 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIVlanTunnelProtocolStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIVLAN-EXT-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIVLAN-EXT-MIB::fsMIVlanTunnelProtocolStatsTable' 
This table contains statistics information about the tunneled 
Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) 
received and transmitted over a port.
          
This table is supported only for Provider (Q-in-Q) and 802.1ad 
Bridges. This is not supported for customer bridges.
fsMIVlanTunnelProtocolStatsEntry row .1.3.6.1.4.1.2076.138.2.4.1
Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2
protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) on this port.
Indexes
Column Syntax OID
fsMIVlanTunnelProtocolDot1xPktsRecvd
The number of tunneled Dot1x Packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.1
fsMIVlanTunnelProtocolDot1xPktsSent
The number of tunneled Dot1x Packets transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.2
fsMIVlanTunnelProtocolLacpPktsRecvd
The number of tunneled LACP Packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.3
fsMIVlanTunnelProtocolLacpPktsSent
The number of tunneled LACP packets transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.4
fsMIVlanTunnelProtocolStpPDUsRecvd
The number of tunneled STP PDUs received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.5
fsMIVlanTunnelProtocolStpPDUsSent
The number of tunneled STP PDUs transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.6
fsMIVlanTunnelProtocolGvrpPDUsRecvd
The number of tunneled GVRP PDUs received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.7
fsMIVlanTunnelProtocolGvrpPDUsSent
The number of tunneled GVRP PDUs transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.8
fsMIVlanTunnelProtocolGmrpPktsRecvd
The number of tunneled GMRP PDUs packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.9
fsMIVlanTunnelProtocolGmrpPktsSent
The number of tunneled GMRP packets transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.10
fsMIVlanTunnelProtocolIgmpPktsRecvd
The number of tunneled IGMP packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.11
fsMIVlanTunnelProtocolIgmpPktsSent
This object specifies the number of tunneled IGMP packets transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.12
fsMIVlanTunnelProtocolMvrpPktsRecvd
The number of MVRPDUs received on a port for which the MVRP tunneling
status is enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.13
fsMIVlanTunnelProtocolMvrpPktsSent
The number of MVRPDUs transmitted on a port on which the MVRP tunneling
status is enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.14
fsMIVlanTunnelProtocolMmrpPktsRecvd
The number of MMRPDUs received on a port for which the MMRP tunneling
status is enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.15
fsMIVlanTunnelProtocolMmrpPktsSent
The number of MMRPDUs transmitted on a port on which the MMRP tunneling
status is enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.16
fsMIVlanTunnelProtocolElmiPktsRecvd
The number of ELMIPDUs received on a port for which the ELMI tunneling
status is enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.17
fsMIVlanTunnelProtocolElmiPktsSent
The number of ELMIPDUs transmitted on a port on which the ELMI tunneling
status is enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.18
fsMIVlanTunnelProtocolLldpPktsRecvd
The number of LLDPPDUs received on a port for which the LLDP tunneling
status is enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.19
fsMIVlanTunnelProtocolLldpPktsSent
The number of LLDPPDUs transmitted on a port on which the LLDP tunneling
status is enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.20
fsMIVlanTunnelProtocolEcfmPktsRecvd
The number of ECFMPDUs received on a port for which the ECFM tunneling
status is enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.21
fsMIVlanTunnelProtocolEcfmPktsSent
The number of ECFMPDUs transmitted on a port on which the ECFM tunneling
status is enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.22
fsMIVlanTunnelProtocolEoamPktsRecvd
This object displays the number of EOAMPDUs received on a port on which the EOAM tunneling
status is enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.23
fsMIVlanTunnelProtocolEoamPktsSent
This object displays number of EOAMPDUs transmitted on a port for which the EOAM tunneling
status is enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.4.1.24

fsMIServiceVlanTunnelProtocolTable

table
.1.3.6.1.4.1.2076.138.2.5 · 1 row entry · 9 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIServiceVlanTunnelProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIVLAN-EXT-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIVLAN-EXT-MIB::fsMIServiceVlanTunnelProtocolTable' 
This table contains information about the handling (Tunnel/Peer/
Discard)of customer Layer 2 protocols (GVRP/GMRP/IGMP/MVRP/MMRP/ECFM)
with service based inside service provider network.
fsMIServiceVlanTunnelProtocolEntry row .1.3.6.1.4.1.2076.138.2.5.1
This entry indicates the handling (Tunnel/Peer/Discard) of Layer 2
protocols (GVRP/GMRP/IGMP/MVRP/MMRP/ECFM) on the VLAN.

Tunnel Status cannot be set to `tunnel/discard`, if the protocol
is enabled globally…
Indexes
Column Syntax OID
fsMIServiceVlanId
This object specifies the service vlan identifier which is allocated
for the customer at provider domain.
AricentMIVlan-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.138.2.5.1.1
fsMIServiceProtocolEnum
This object specifies the protocols which are received on the service.
L2CPProtocols
Type Constraints:
range: 1..23
 .1.3.6.1.4.1.2076.138.2.5.1.2
fsMIServiceVlanRsvdMacaddress
This object specifies the reserved MAC address for the protocol and
it is applicable only when the value of the field fsMIServiceProtocolEnum
is `other`.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.138.2.5.1.3
fsMIServiceVlanTunnelMacaddress
This object specifies the Tunnel MAC address for the protocol and it is
applicable only when the value of the field fsMIServiceProtocolEnum is
`other`.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.138.2.5.1.4
fsMIServiceVlanTunnelProtocolStatus
This object specifies the status (peer/tunnel/discard) of L2 packets
received on the VLAN.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.138.2.5.1.5
fsMIServiceVlanTunnelPktsRecvd
This object specifies the number of tunneled Packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.5.1.6
fsMIServiceVlanTunnelPktsSent
This object specifies the number of tunneled Packets transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.5.1.7
fsMIServiceVlanDiscardPktsRx
This object specifies the number of packets discarded on the reception side
due to discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.5.1.8
fsMIServiceVlanDiscardPktsTx
This object specifies the number of packets discarded on the transmission side
due to discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.2.5.1.9

fsMIVlanDiscardStatsTable

table
.1.3.6.1.4.1.2076.138.3.1 · 1 row entry · 24 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIVlanDiscardStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIVLAN-EXT-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIVLAN-EXT-MIB::fsMIVlanDiscardStatsTable' 
This table contains statistics information about the L2 protocol   
packets (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) discarded 
on reception and transmission side due to 'Discard' tunnel protocol 
status.
fsMIVlanDiscardStatsEntry row .1.3.6.1.4.1.2076.138.3.1.1
Entry indicating the Discard statistics for L2 protocol packets.
This table is supported only for Provider(Q-in-Q) and 802.1ad Bridges.
Indexes
Column Syntax OID
fsMIVlanDiscardDot1xPktsRx
The number of Dot1x packets discarded on the reception side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.1
fsMIVlanDiscardDot1xPktsTx
The number of Dot1x packets discarded on the transmission side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.2
fsMIVlanDiscardLacpPktsRx
The number of LACP packets discarded on the reception side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.3
fsMIVlanDiscardLacpPktsTx
The number of LACP packets discarded on the transmission side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.4
fsMIVlanDiscardStpPDUsRx
The number of STP BPDUs discarded on the reception side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.5
fsMIVlanDiscardStpPDUsTx
The number of STP BPDUs discarded on the transmission side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.6
fsMIVlanDiscardGvrpPktsRx
The number of GVRP packets discarded on the reception side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.7
fsMIVlanDiscardGvrpPktsTx
The number of GVRP packets discarded on the transmission side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.8
fsMIVlanDiscardGmrpPktsRx
The number of GMRP packets discarded on the reception side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.9
fsMIVlanDiscardGmrpPktsTx
The number of GMRP packets discarded on the transmission side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.10
fsMIVlanDiscardIgmpPktsRx
The number of IGMP packets discarded on the reception side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.11
fsMIVlanDiscardIgmpPktsTx
The number of IGMP packets discarded on the transmission side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.12
fsMIVlanDiscardMvrpPktsRx
The number of MVRP packets discarded on the reception side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.13
fsMIVlanDiscardMvrpPktsTx
The number of MVRP packets discarded on the transmission side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.14
fsMIVlanDiscardMmrpPktsRx
This object specifies the number of MMRP packets discarded on the reception side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.15
fsMIVlanDiscardMmrpPktsTx
The number of MMRP packets discarded on the transmission side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.16
fsMIVlanDiscardElmiPktsRx
This object specifies the number of ELMI packets discarded on the reception side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.17
fsMIVlanDiscardElmiPktsTx
The number of ELMI packets discarded on the transmission side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.18
fsMIVlanDiscardLldpPktsRx
The number of LLDP packets discarded on the reception side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.19
fsMIVlanDiscardLldpPktsTx
The number of LLDP packets discarded on the transmission side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.20
fsMIVlanDiscardEcfmPktsRx
This object specifies the number of ECFM packets discarded on the reception side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.21
fsMIVlanDiscardEcfmPktsTx
The number of ECFM packets discarded on the transmission side
due to Discard option.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.22
fsMIVlanDiscardEoamPktsRx
This object displays the number of EOAM packets discarded
on the reception side when the tunnel protocol status
is set as Discard.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.23
fsMIVlanDiscardEoamPktsTx
This object displays the number of EOAM packets discarded
on the transmission side, when the tunnel protocol status
is set as Discard.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.138.3.1.1.24