ARICENT-LBD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
8

fsLbdPortTable

table
.1.3.6.1.4.1.29601.2.123.2.1 · 1 row entry · 8 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsLbdPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-LBD-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-LBD-MIB::fsLbdPortTable' 
This table contains Loop Back Detection related configuration and statistics
at port level.
fsLbdPortEntry row .1.3.6.1.4.1.29601.2.123.2.1.1
Each entry in this table contains Loop Back Detection related configuration and statistics
for a port.
Indexes
Column Syntax OID
fsLbdPortId
This object specifies the Inteface index over which Loopback detection is connected
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.123.2.1.1.1
fsLbdLoopDetectStatus
This object is used to enable or disable the Loopback detection functionality in
the port. A value of 'enabled' (1) indicates that Loopback detection
functionality is enabled on the port. A value of 'disabled' (2)
indi…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.123.2.1.1.2
fsLbdTxCount
This object specifies the number of LPD PDUs transmitted out of the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.123.2.1.1.3
fsLbdRxCount
This object specifies the number of LPD PDUs received on the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.123.2.1.1.4
fsLbdPortStatus
This object indicates the current condition of the network connected to the port.
'noloopback' indicates that loop back condition is not detected in the network connected to the port.
'loopback' indicates that loop back…
Enumeration
Enumerated Values:
0noloopback
1loopback
 .1.3.6.1.4.1.29601.2.123.2.1.1.5
fsLbdPktTxFromPort
This object indicates the 'port-number' that was present in the received LBD PDU.
This port-number may be the potential port causing the loop condition in the network.
This object is valid only when 'loopback' condition…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.123.2.1.1.6
fsLbdPortRowStatus
Row status for the Port Entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.123.2.1.1.7
fsLbdClearStats
This object is used to clear the statistics of port.
When this object is set to 'true', it will clear the statistics of the port and reverts back to 'false'
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.123.2.1.1.8