ARICENT-LA-MIB Table View

A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table. 
This Port-channel table is indexed through Key values and allows to 
configure link selection policy and the Mac address for 
the port-channel. All other objects in this table displays 
the details of the port-channel.

fsLaPortChannelEntry row .1.3.6.1.4.1.2076.63.2.1.1

There is one entry in this table for each created
port-channel port.

Indexes

fsLaPortChannelIfIndex

Column	Syntax	OID
fsLaPortChannelIfIndex The ifIndex of the port-channel(Aggregator's interface index).	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2076.63.2.1.1.1
fsLaPortChannelGroup An index that uniquely identifies an entry in this table.	IEEE8023-LAG-MIBLacpKey Type Constraints: range: 0..65535	.1.3.6.1.4.1.2076.63.2.1.1.2
fsLaPortChannelAdminMacAddressdeprecated This object is used for configuring MacAddress that is to be used by the port-channel when fsLaPortChannelMacSelection is force. WARNING: The value configured should not conflict with the MAC address of system ports th…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2076.63.2.1.1.3
fsLaPortChannelMacSelectiondeprecated Indicates the MAC address selection method for for the port-channel. Dynamic - System will reserve certain MAC address for aggregators. These MAC address are derived from BaseMac. If this object is …	Enumerationr/w Enumerated Values: 1 dynamic 2 force	.1.3.6.1.4.1.2076.63.2.1.1.4
fsLaPortChannelMode Current Operating Channel Mode of the port Lacp(1) - forcing the port to negotiate with the partner. manual(2) - force the port to enable channeling (Manual). disable(3) - channeling is disabled.	PortLaMode Type Values: 1 lacp 2 manual 3 disable	.1.3.6.1.4.1.2076.63.2.1.1.5
fsLaPortChannelPortCount The number of ports actually configured to the port-channel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2076.63.2.1.1.6
fsLaPortChannelActivePortCount This object will give the number of ports that are attached to the port-channel and actively carrying data traffic on the link.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2076.63.2.1.1.7
fsLaPortChannelSelectionPolicy Link selection policy to be used by the port-channel. Selection policy ISID implies selection based on Service-instance and is applicable only in provider Backbone bridge.	Enumerationr/w Enumerated Values: 1 macSrc 2 macDst 3 macSrcDst 4 ipSrc 5 ipDst 6 ipSrcDst 7 vlanId 8 isid 9 macSrcVid 10 macDstVid 11 macSrcDstVid 12 mplsVcLabel 13 mplsTunnelLabel 14 mplsVcTunnelLabel 15 enhanced 16 randomized	.1.3.6.1.4.1.2076.63.2.1.1.8
fsLaPortChannelDefaultPortIndex The ifIndex of the default port that gets attached to the aggregator. A value of 0 means there is no default port for this port-channel. If this object is set to 0, it will remove the current default port from the aggr…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2076.63.2.1.1.9
fsLaPortChannelMaxPorts This object specifies the maximum number of ports that can attach to a port-channel.	Integer32r/w Constraints: range: 2-8	.1.3.6.1.4.1.2076.63.2.1.1.10
fsLaPortChannelSelectionPolicyBitList This object is used to set the link selection policy to be used by the port-channel. A four byte integer is used for setting the selecting policy. Each bit in the four byte integer represents a particular selection poli…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2076.63.2.1.1.11
fsLaPortChannelDLAGDistributingPortIndex This object is used to configure the distributing port on which D-LAG periodic-sync and D-LAG event-update messages will be sent/received for D-LAG internal communication between the D-LAG nodes. Ports wh…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2076.63.2.1.1.12
fsLaPortChannelDLAGSystemID This object is used to configure the common system ID in D-LAG nodes to be used for communicating with the peer node when D-LAG status is enabled. Since all the D-LAG nodes use this common D-LAG system ID…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2076.63.2.1.1.13
fsLaPortChannelDLAGSystemPriority This object is used for configuring common system priority in D-LAG nodes to be used for communicating with the peer node when D-LAG status is enabled. Since all the D-LAG nodes use this common D-LAG syst…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2076.63.2.1.1.14
fsLaPortChannelDLAGPeriodicSyncTime This object is used to configure the D-LAG periodic sync timer used in distributed link aggregation. Periodic sync timer is used to configure the transmission interval of D-LAG periodic-sync PDUs. Periodic-sync timer wi…	millisecondsUnsigned32r/w Constraints: range: 0-90000	.1.3.6.1.4.1.2076.63.2.1.1.15
fsLaPortChannelDLAGMSSelectionWaitTime This object is used to configure the period for the master slave selection wait timer used in distributed link aggregation. This object is applicable, only if D-LAG status and D-LAG redundancy feature i…	millisecondsUnsigned32r/w Constraints: range: 0-90000	.1.3.6.1.4.1.2076.63.2.1.1.16
fsLaPortChannelDLAGRolePlayed This object is used to hold the current role played by the device participating in distributed LAG. This object is applicable, only if D-LAG status and D-LAG redundancy feature is enabled. …	Enumeration Enumerated Values: 0 none 1 master 2 slave 3 backupmaster	.1.3.6.1.4.1.2076.63.2.1.1.17
fsLaPortChannelDLAGStatus This object is used to enable or disable the D-LAG functionality. This object can be modified irrespective of whether corresponding port-channel is enabled/disabled. Configuring D-LAG statu…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.63.2.1.1.18
fsLaPortChannelDLAGRedundancy This object is used to enable/disable the redundancy feature in D-LAG node. When D-LAG redundancy feature is enabled, master-slave-selection algorithm can be used to select master/slave/backup-master. …	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.2076.63.2.1.1.19
fsLaPortChannelDLAGMaxKeepAliveCount This read-only MIB object is used to provide keep alive mechanism when D-LAG status is enabled. Each D-LAG node will have a Max Keep alive count and each D-LAG node maintains separate keep alive counts for all other rem…	Integer32 Constraints: range: 0-5	.1.3.6.1.4.1.2076.63.2.1.1.20
fsLaPortChannelDLAGPeriodicSyncPduTxCount This object is used when distributing feature is enabled in a node to hold the number of periodic-sync PDUs sent on the distributing port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.2.1.1.21
fsLaPortChannelDLAGPeriodicSyncPduRxCount This object is used when distributing feature is enabled in a node to hold the number of periodic-sync PDUs received on the distributing port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.2.1.1.22
fsLaPortChannelDLAGEventUpdatePduTxCount This object is used when distributing feature is enabled in a node to hold the number of event-update PDUs sent on the distributing port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.2.1.1.23
fsLaPortChannelDLAGEventUpdatePduRxCount This object is used when distributing feature is enabled in a node to hold the number of event-update PDUs received on the distributing port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.2.1.1.24
fsLaPortChannelDLAGElectedAsMasterCount This object is used when distributing feature and redundancy feature both are enabled in a D-LAG node to hold the number of times the port-channel has been selected as master.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.2.1.1.25
fsLaPortChannelDLAGElectedAsSlaveCount This object is used when distributing feature and redundancy feature both are enabled in a D-LAG node to hold the number of times the port-channel has been selected as slave.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.2.1.1.26
fsLaPortChannelTrapTxCount The number of trap messages sent from the port-channel.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.2.1.1.27
fsLaPortChannelDLAGDistributingPortList This object is used to configure the distributing port list on which D-LAG periodic-sync and D-LAG event-update messages will be sent/received for D-LAG internal communication between the D-LAG nodes. Por…	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.2076.63.2.1.1.28
fsLaPortChannelMCLAGStatus This object is used to enable or disable the MC-LAG functionality. This object can be modified irrespective of whether corresponding port-channel is enabled/disabled. Configuring MC-LAG sta…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.63.2.1.1.29
fsLaPortChannelMCLAGSystemID This object is used to configure the common system ID in MC-LAG nodes to be used for communicating with the peer node when MC-LAG status is enabled. Since all the MC-LAG nodes use this common MC-LAG syste…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2076.63.2.1.1.30
fsLaPortChannelMCLAGSystemPriority This object is used for configuring common system priority in MC-LAG nodes to be used for communicating with the peer node when MC-LAG status is enabled. Since all the MC-LAG nodes use this common MC-LAG …	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2076.63.2.1.1.31
fsLaPortChannelMCLAGRolePlayed This object is used to hold the current role played by the device participating in MC-LAG. Role played by device can be none(0) - Current role played by the device will be set …	Enumeration Enumerated Values: 0 none 1 master 2 slave	.1.3.6.1.4.1.2076.63.2.1.1.32
fsLaPortChannelMCLAGMaxKeepAliveCount This read-only MIB object is used to provide keep alive mechanism when MC-LAG status is enabled. Each MC-LAG node will have a Max Keep alive count and each MC-LAG node maintains separate keep alive counts for all other …	Integer32 Constraints: range: 0-5	.1.3.6.1.4.1.2076.63.2.1.1.33
fsLaPortChannelMCLAGPeriodicSyncPduTxCount This object is used when MC-LAG feature is enabled in a node to hold the number of periodic-sync PDUs sent on the ICCL port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.2.1.1.34
fsLaPortChannelMCLAGPeriodicSyncPduRxCount This object is used when MC-LAG feature is enabled in a node to hold the number of periodic-sync PDUs received on the ICCL port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.2.1.1.35
fsLaPortChannelMCLAGEventUpdatePduTxCount This object is used when MC-LAG feature is enabled in a node to hold the number of event-update PDUs sent on the ICCL port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.2.1.1.36
fsLaPortChannelMCLAGEventUpdatePduRxCount This object is used when MC-LAG feature is enabled in a node to hold the number of event-update PDUs received on the ICCL port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.2.1.1.37
fsLaPortChannelClearStatistics This object is used to clear the statistics of port channel and its member ports. When this object is set to TRUE, it will clear the statistics for the port channel and member ports of that port channel.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.63.2.1.1.38
fsLaPortChannelUpCount This object specifies the number of times a portchannel moves to operational up state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.2.1.1.39
fsLaPortChannelDownCount This object specifies the number of times a portchannel moves to operational down state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.2.1.1.40
fsLaPortChannelHotStandByPortsCount This object specifies the number of hot standby ports in this port channel entry.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.2.1.1.41
fsLaPortChannelOperChgTimeStamp This object specifies the last operational change timestamp for this port channel.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.2.1.1.42
fsLaPortChannelDownReason This object specifies the reason when the portchannel moves to down state. operDown(1) - The port is operationally down. adminDown(2) - The port is shutdown by the user.	Enumeration Enumerated Values: 1 operDown 2 adminDown	.1.3.6.1.4.1.2076.63.2.1.1.43

This table contains port-channel attributes that
are used for manipulating entries in various tables.
          
fsLaIfPortChannelTable entry creation, modification 
and deletion results in related actions being 
performed on multiple tables, including ifMainTable, 
fsLaPortChannelTable, faLaPortTable and the 
dot3adAggPortTable. Likewise, data returned through 
fsLaIfPortChannelTable queries is derived from these 
tables.

fsLaIfPortChannelEntry row .1.3.6.1.4.1.2076.63.2.2.1

Information about a specific port-channel and
related components.

Indexes

fsLaIfPortChannelName

Column	Syntax	OID
fsLaIfPortChannelName The port-channel name of the form 'po<Key>', where <Key> is the port- channel group key.	OctetString Constraints: range: 3-7	.1.3.6.1.4.1.2076.63.2.2.1.1
fsLaIfPortChannelIfIndex The ifIndex of the port-channel.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2076.63.2.2.1.2
fsLaIfPortChannelGroupKey Port-channel group key identifier.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2076.63.2.2.1.3
fsLaIfPortChannelOperMode The operational mode of the port-channel. If the port-channel has no assigned ports, the mode is 'disable(4)'.	Enumerationr/w Enumerated Values: 1 manual 2 passive 3 active 4 disable	.1.3.6.1.4.1.2076.63.2.2.1.4
fsLaIfPortChannelPorts Text string identifying the port-channel member ports using the system representation of the port name. A maximum of 8 comma-separated port names can be specified, e.g., 'gi0/4,gi0/5,gi0/10'.	OctetStringr/w Constraints: range: 5-55	.1.3.6.1.4.1.2076.63.2.2.1.5
fsLaIfPortChannelAdminStatus The administrative status for the port-channel.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2076.63.2.2.1.6
fsLaIfPortChannelMtu The MTU for the port-channel. When changing the MTU, the port-channel must first be brought down. Changing MTU while the port-channel is administratively up is not permitted. If not specif…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2076.63.2.2.1.7
fsLaIfPortChannelPvid The PVID for the port-channel.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.2076.63.2.2.1.8
fsLaIfPortChannelPortMode The port mode for the port-channel.	Enumerationr/w Enumerated Values: 1 access 2 trunk 3 hybrid	.1.3.6.1.4.1.2076.63.2.2.1.9
fsLaIfPortChannelStpStatus The STP status for the port-channel.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.63.2.2.1.10
fsLaIfPortChannelDesc A textual string which contains a description for the port-channel interface. Attribute has the same semantics as the ifMainDesc object.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2076.63.2.2.1.11
fsLaIfPortChannelRowStatus This object allows entries to be created, modified and deleted in the fsLaIfPortChannelTable. Values 'createAndWait', 'active' and 'destroy' are supported for Sets. The rowStatus value of the underlying…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.63.2.2.1.12
fsLaIfPortChannelUserPriority The default user priority for the port-channel.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2076.63.2.2.1.13

A table that contains objects to set the port LACP mode
of dot3adAggPortTable.

fsLaPortEntry row .1.3.6.1.4.1.2076.63.3.1.1

Each entry in this table is for each physical port that participates
in link aggregation which can be either aggregatable or individual.
This table is indexed by the PortIndex.

Indexes

fsLaPortIndex

Column	Syntax	OID
fsLaPortIndex The ifIndex of the port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2076.63.3.1.1.1
fsLaPortMode This object is used to enable LACP, disable LACP or manually aggregate a port.	PortLaModer/w Type Values: 1 lacp 2 manual 3 disable	.1.3.6.1.4.1.2076.63.3.1.1.2
fsLaPortBundleState This read-only object is used to display the port state in aggregation upInBndl(0) - The port is operationally up and actively takes part in aggregation. standby(1) - The port is capable o…	Enumeration Enumerated Values: 0 upInBndl 1 standby 2 down 3 upIndividual	.1.3.6.1.4.1.2076.63.3.1.1.3
fsLaPortActorResetAdminState A string of 8 bits corresponding to the administrative values of Actor_State as transmitted by the actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activity), the second bit corresponds to bit 1…	LacpStater/w Type Values: 0 lacpActivity 1 lacpTimeout 2 aggregation 3 synchronization 4 collecting 5 distributing 6 defaulted 7 expired	.1.3.6.1.4.1.2076.63.3.1.1.4
fsLaPortAggregateWaitTime Duration of the port to attach to the PortChannel.	SNMPv2-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.3.1.1.5
fsLaPortPartnerResetAdminState A string of 8 bits corresponding to the administrative values of Partner_State. The first bit corresponds to bit 0 of Partner_State (LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout), the third …	LacpStater/w Type Values: 0 lacpActivity 1 lacpTimeout 2 aggregation 3 synchronization 4 collecting 5 distributing 6 defaulted 7 expired	.1.3.6.1.4.1.2076.63.3.1.1.6
fsLaPortActorAdminPort The port number used as dot3adAggPortActorPort and is communicated in LACPDUs as the Actor_Port.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2076.63.3.1.1.7
fsLaPortRestoreMtu The Restore MTU stores the original MTU of the port before getting aggregated to port channel. A SET on the MIB object is not allowed for SNMP users. This operation is allowed only during config-save-restore operation…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2076.63.3.1.1.8
fsLaPortSelectAggregator This read-only object is used to display whether the port participates in dynamic aggregator selection. The default will be static aggregation selection. static(0) - The port is involved only in static aggregati…	Enumeration Enumerated Values: 0 static 1 dynamic	.1.3.6.1.4.1.2076.63.3.1.1.9
fsLaPortErrStateDetCount This object is used to track number of times the port goes to detected state	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.3.1.1.10
fsLaPortErrStateRecCount This object is used to track number of times the port executes recovery code	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.3.1.1.11
fsLaPortDefaultedStateThreshold This object is used to track the maximum number of times a port in defaulted state can undergo error recovery. The value configured for fsLaDefaultedStateThreshold will override the threshold value configured on the por…	Unsigned32r/w Constraints: range: 0-20	.1.3.6.1.4.1.2076.63.3.1.1.12
fsLaPortHardwareFailureRecThreshold This object is used to track the maximum number of times a port can undergo recovery after a hardware failure. The value configured for fsLaHardwareFailureRecThreshold will override the threshold value configured on the…	Unsigned32r/w Constraints: range: 0-20	.1.3.6.1.4.1.2076.63.3.1.1.13
fsLaPortSameStateRecThreshold This object is used to track the maximum number of times a port can undergo recovery after a hardware failure. The value configured for fsLaSameStateRecThreshold will override the threshold value configured on the ports.	Unsigned32r/w Constraints: range: 0-20	.1.3.6.1.4.1.2076.63.3.1.1.14
fsLaPortUpInBundleCount This object is used to track the number of times a port goes to up-in-bundle state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.3.1.1.15
fsLaPortDownInBundleCount This object is used to track the number of times a port goes to down-in-bundle state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.3.1.1.16
fsLaPortBundStChgTimeStamp This object specifies the timestamp when a ports bundle state changes.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.3.1.1.17
fsLaPortDownInBundleReason This object specifies the reason when a port goes to operationally down state. operDown(1) - The port is operationally down partnerKeyMismatch(2)- partner admin key mismatch partnerIdMismatch(3) - Partner Id mismatch …	Enumeration Enumerated Values: 1 operDown 2 partnerKeyMismatch 3 partnerIdMismatch 4 partnerKeyZero 5 speedMismatch 6 mtuMismatch 7 pausemodeMismatch 8 portAggregation 9 hardwareFailure 10 hotStandBy 11 noLACPReceived	.1.3.6.1.4.1.2076.63.3.1.1.18
fsLaPortErrStateDetTimeStamp This object specifies the timestamp when the port goes to error detected state.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.3.1.1.19
fsLaPortErrStateRecTimeStamp This object specifies the timestamp when the port goes to error triggered state.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.3.1.1.20
fsLaPortRecTrigReason This object specifies the reason for error recovery: defaulted(1)- Port goes to defaulted state. hardwareFailure(2)- Hardware programming fails. sameState(3)-Port is stuck in same state for longer time.	Enumeration Enumerated Values: 1 defaulted 2 hardwareFailure 3 sameState	.1.3.6.1.4.1.2076.63.3.1.1.21
fsLaPortDefStateRecCount This object indicates the number of times a port undergoes error recovery due to defaulted state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.3.1.1.22
fsLaPortSameStateRecCount This object indicates the number of times a port undergoes error recovery due to same state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.3.1.1.23
fsLaPortHwFailRecCount This object specifies the number of times a port undergoes error recovery due to hardware failure.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.3.1.1.24
fsLaPortDefStateRecTimeStamp This object specifies the time when the last recovery is triggered to overcome from the defaulted state.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.3.1.1.25
fsLaPortSameStateRecTimeStamp This object specifies the time when the last recovery is triggered to overcome same state failure.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.3.1.1.26
fsLaPortHwFailRecTimeStamp This object specifies the time when the last recovery is triggered to overcome the hardware failure.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.3.1.1.27
fsLaPortRecState This object indicates the same state in which the port stays for a threshold before triggering a error recovery.	LacpState Type Values: 0 lacpActivity 1 lacpTimeout 2 aggregation 3 synchronization 4 collecting 5 distributing 6 defaulted 7 expired	.1.3.6.1.4.1.2076.63.3.1.1.28

This table is used to store the notification information
occurred.

fsLaHwFailTrapObjectsEntry row .1.3.6.1.4.1.2076.63.4.1.1

This entry is used to store the notification information.

Indexes

fsLaTrapPortChannelIndex fsLaTrapPortIndex

Column	Syntax	OID
fsLaTrapPortChannelIndex The ifIndex of the port-channel for which the failure has occurred.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2076.63.4.1.1.1
fsLaTrapPortIndex The ifIndex of the port for which the failure has occurred. A value of 0 means the failure is not port-specific.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2076.63.4.1.1.2
fsLaHwFailTrapType The hardware error type.	Enumeration Enumerated Values: 0 createAgg 1 addLinkToAgg 2 deleteAgg 3 removeLinkFromAgg 4 setSelectionPolicy 5 enableCollection 6 disableCollection 7 enableDistribution	.1.3.6.1.4.1.2076.63.4.1.1.3

This table is used to store the notification information
occurred for the distributed link aggregation.

fsLaDLAGTrapObjectsEntry row .1.3.6.1.4.1.2076.63.4.2.1

This entry is used to store the notification information.

Indexes

fsLaDLAGTrapPortChannelIndex

Column	Syntax	OID
fsLaDLAGTrapPortChannelIndex The port-channel interface index of the node which is role change event has occurred because of the master-slave-re-selection process. The role change can be either from master to slave or from slave to master.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2076.63.4.2.1.1
fsLaDLAGTrapType Traps generated in the master-slave selection/ master-slave-reselection process Trap type can be mastertobackupmaster : When the role played by the device changes from master to backup-master.…	Enumeration Enumerated Values: 0 mastertobackupmaster 1 backupmastertomaster 2 slavetobackupmaster 3 backupmastertoslave 4 mastertoslave 5 slavetomaster	.1.3.6.1.4.1.2076.63.4.2.1.2

This table is used to access the stored details of
all remote port-channels that are part of same D-LAG.
This table is indexed by port channel index and
remote port-channel unique system id.
All other objects in this table displays stored 
details of the remote port-channel.

fsLaDLAGRemotePortChannelEntry row .1.3.6.1.4.1.2076.63.6.1.1

There is one entry in this table for each remote port-channel
participating in distributed LAG other than the self.

Indexes

fsLaPortChannelIfIndex fsLaDLAGRemotePortChannelSystemID

Column	Syntax	OID
fsLaDLAGRemotePortChannelSystemID This is used to read the stored 6-octet MAC address value of each remote D-LAG node, which uniquely identifies the remote D-LAG node.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2076.63.6.1.1.1
fsLaDLAGRemotePortChannelSystemPriority This object is used to read the stored system priority of each remote D-LAG node.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2076.63.6.1.1.2
fsLaDLAGRemotePortChannelRolePlayed This object is used to read the stored value of current role played by each remote D-LAG node Value of role played by the remote D-LAG node can be none (0) - Current role played by the rem…	Enumeration Enumerated Values: 0 none 1 master 2 slave 3 backupmaster	.1.3.6.1.4.1.2076.63.6.1.1.3
fsLaDLAGRemotePortChannelKeepAliveCount This object represents the current keep alive count value of running keep alive counter maintained for each remote D-LAG node. This count will be incremented by value 1 for all the remote D-LAG node entri…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2076.63.6.1.1.4
fsLaDLAGRemotePortChannelSpeed This object represents the current speed of remote node port-channel, this can be referred in units of bits per second. If the speed of the particular port channel is greater among all the port-channels, then the activ…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.6.1.1.5
fsLaDLAGRemotePortChannelHighSpeed This object represents the current speed of remote node port-channel, this can be referred in units of 1,000,000 bits per second. If the speed of the particular port channel is greater among all the port-channels, then …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.6.1.1.6
fsLaDLAGRemotePortChannelMtu This object represents the current MTU of remote port-channel which is used for selecting best links in case of Active-Active DLAG. If the MTU of the particular port channel is greater among all the port-…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2076.63.6.1.1.7

This table is used to access the stored port list information
of each remote D-LAG node.
This table is indexed by combination of port-channel index,
remote port-channel unique system ID, and port indices configured
for that remote D-LAG node.

fsLaDLAGRemotePortEntry row .1.3.6.1.4.1.2076.63.7.1.1

There is one entry in this table for each port belonging
to the remote D-LAG node.

Indexes

fsLaPortChannelIfIndex fsLaDLAGRemotePortChannelSystemID fsLaDLAGRemotePortIndex

Column	Syntax	OID
fsLaDLAGRemotePortIndex This object is used to get the ifIndex of each port belonging to the remote D-LAG node.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2076.63.7.1.1.1
fsLaDLAGRemotePortBundleState This read-only object is used to get the port bundle states of each port belonging to the remote D-LAG node upInBndl(0) - The port is operationally up and actively takes part in aggregation. standby(1) …	Enumeration Enumerated Values: 0 upInBndl 1 standby 2 down 3 upIndividual	.1.3.6.1.4.1.2076.63.7.1.1.2
fsLaDLAGRemotePortSyncStatus This read-only object is used to get the current sync status of the each port belonging to the remote D-LAG node inSync(1) - The port sync status is inSync. outofSync(2) - The port sync sta…	Enumeration Enumerated Values: 1 inSync 2 outofSync	.1.3.6.1.4.1.2076.63.7.1.1.3
fsLaDLAGRemotePortPriority This read-only object is used to get the current port priority of the each port belonging to the remote D-LAG node.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2076.63.7.1.1.4

This table is used to access the stored details of
all remote port-channels that are part of same MC-LAG.
This table is indexed by port channel index and
remote port-channel unique system id.
All other objects in this table displays stored
details of the remote port-channel.

fsLaMCLAGRemotePortChannelEntry row .1.3.6.1.4.1.2076.63.8.1.1

There is one entry in this table for each remote port-channel
participating in MC-LAG other than the self.

Indexes

fsLaPortChannelIfIndex fsLaMCLAGRemotePortChannelSystemID

Column	Syntax	OID
fsLaMCLAGRemotePortChannelSystemID This is used to read the stored 6-octet MAC address value of each remote MC-LAG node, which uniquely identifies the remote MC-LAG node.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2076.63.8.1.1.1
fsLaMCLAGRemotePortChannelSystemPriority This object is used to read the stored system priority of each remote MC-LAG node.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2076.63.8.1.1.2
fsLaMCLAGRemotePortChannelRolePlayed This object is used to read the stored value of current role played by each remote MC-LAG node Value of role played by the remote MC-LAG node can be none (0) - Current role played by the r…	Enumeration Enumerated Values: 0 none 1 master 2 slave	.1.3.6.1.4.1.2076.63.8.1.1.3
fsLaMCLAGRemotePortChannelKeepAliveCount This object represents the current keep alive count value of running keep alive counter maintained for each remote MC-LAG node. This count will be incremented by value 1 for all the remote MC-LAG node ent…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2076.63.8.1.1.4
fsLaMCLAGRemotePortChannelSpeed This object represents the current speed of remote node port-channel, this can be referred in units of bits per second. If the speed of the particular port channel is greater among all the port-channels, then the active…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.8.1.1.5
fsLaMCLAGRemotePortChannelHighSpeed This object represents the current speed of remote node port-channel, this can be referred in units of 1,000,000 bits per second. If the speed of the particular port channel is greater among all the port-channels, then …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.63.8.1.1.6
fsLaMCLAGRemotePortChannelMtu This object represents the current MTU of remote port-channel which is used for selecting best links in case of Active-Active MC-LAG. If the MTU of the particular port channel is greater among all the por…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2076.63.8.1.1.7

This table is used to access the stored port list information
of each remote MC-LAG node.
This table is indexed by combination of port-channel index,
remote port-channel unique system ID, and port indices configured
for that remote MC-LAG node.

fsLaMCLAGRemotePortEntry row .1.3.6.1.4.1.2076.63.9.1.1

There is one entry in this table for each port belonging
to the remote MC-LAG node.

Indexes

fsLaPortChannelIfIndex fsLaMCLAGRemotePortChannelSystemID fsLaMCLAGRemotePortIndex

Column	Syntax	OID
fsLaMCLAGRemotePortIndex This object is used to get the ifIndex of each port belonging to the remote MC-LAG node.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2076.63.9.1.1.1
fsLaMCLAGRemotePortSlotIndex This read-only object is used to get the current slot index of the each port belonging to the remote MC-LAG node.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2076.63.9.1.1.2
fsLaMCLAGRemotePortBundleState This read-only object is used to get the port bundle states of each port belonging to the remote MC-LAG node upInBndl(0) - The port is operationally up and actively takes part in aggregation. standby(1)…	Enumeration Enumerated Values: 0 upInBndl 1 standby 2 down 3 upIndividual	.1.3.6.1.4.1.2076.63.9.1.1.3
fsLaMCLAGRemotePortSyncStatus This read-only object is used to get the current sync status of the each port belonging to the remote MC-LAG node inSync(1) - The port sync status is inSync. outofSync(2) - The port sync statu…	Enumeration Enumerated Values: 1 inSync 2 outofSync	.1.3.6.1.4.1.2076.63.9.1.1.4
fsLaMCLAGRemotePortPriority This read-only object is used to get the current port priority of the each port belonging to the remote MC-LAG node.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2076.63.9.1.1.5