ARICENT-L2IPV6SNP-MIB Table View

Switch context specific parameters for IPv6 control packet snooping related features in
Layer2 switch

fsIpv6SnpSystemEntry row .1.3.6.1.4.1.29601.2.122.1.1.1

Each entry contains the fields ralated to RA-Guard feature enable/disable, traces

Indexes

fsIpv6SnpContexId

Column	Syntax	OID
fsIpv6SnpContexId Identifies switch virtual context	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.122.1.1.1.1
fsIpv6SnpSystemControl The Administrative system control status of IPv6 control packet snooping module. start : Indicates that all resource required for this module are allocated. Configurations are allowed. shutdown : Indicates that all res…	Enumerationr/w Enumerated Values: 1 start 2 shutdown	.1.3.6.1.4.1.29601.2.122.1.1.1.2
fsIpv6SnpRagStatus Object to enable/disable the RA Guard feature in the switch instance	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.29601.2.122.1.1.1.3
fsIpv6SnpTraceLevel This object is to enable/disable the trace statements in IPv6 control packet snooping module The mapping between bit position and the level of trace is as follows: BIT 1 - Indicates all Traces BIT 2 - Ind…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.122.1.1.1.4

This table contains policy match criteria to validate the legitimagte RA messages

fsIpv6SnpRagPolicyEntry row .1.3.6.1.4.1.29601.2.122.2.1.1

Each entry contains the policy details.

Indexes

fsIpv6SnpRagPolicyId

Column	Syntax	OID
fsIpv6SnpRagPolicyId Indicates the RA Guard Policy id.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.29601.2.122.2.1.1.1
fsIpv6SnpRagDeviceRole Indicates the role of the device host mode : All RA messages are disallowed and will be dropped Rotuer mode: RA messages are validated against the policy.	Enumerationr/w Enumerated Values: 1 host 2 router	.1.3.6.1.4.1.29601.2.122.2.1.1.2
fsIpv6SnpRagMbit Enables verification of the advertised 'managed address configuration flag' to be on / off None : Indicates that validation of this field in RA message will be bypassed.	Enumerationr/w Enumerated Values: 0 off 1 on 2 none	.1.3.6.1.4.1.29601.2.122.2.1.1.3
fsIpv6SnpRagObit Enables verification of the advertised 'other configuration flag' to be on / off None : Indicates that validation of this field in RA message will be bypassed.	Enumerationr/w Enumerated Values: 0 off 1 on 2 none	.1.3.6.1.4.1.29601.2.122.2.1.1.4
fsIpv6SnpMatchRagAclId Configures the access list for the policy entry which is used to validate the source link layer address carried by RA message. Value 0 indicates that no access list is associated to the policy entry.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.122.2.1.1.5
fsIpv6SnpMatchRagPrefixListId Configures the prefix list Id used to validate the source ipv6 address prefixes carried by RA message. Value 0 indicates that no IPV6 prefix list is associated to the policy entry.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.122.2.1.1.6
fsIpv6SnpMatchRagSrcIp6ListId Configures the Src Ip6 list Id used to validate the source ipv6 address carried by RA message. Value 0 indicates that no Src Ip6 list is associated to the policy entry.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.122.2.1.1.7
fsIpv6SnpRagHopLimit Value 0: Indicates that validation of this field in RA message will be bypassed Enables the validation of advertised hoplimit carried by RA massage and the values will be as below Value 255: Indicates that the received …	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.29601.2.122.2.1.1.8
fsIpv6SnpRagRouterPreference Enables the validation of advertised router preference carried by RA massage to be low/medium/high. None : Indicates that validation of this field in RA message will be bypassed	Enumerationr/w Enumerated Values: 0 medium 1 high 2 none 3 low	.1.3.6.1.4.1.29601.2.122.2.1.1.9
fsIpv6SnpRagPolicyRowStatus This object is used to create or delete the entry in the RAG policy table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.122.2.1.1.10

This table contains access list information to be 
set as match criteria in the RA Guard policy table 
to validate the incoming RA message

fsIpv6SnpRagAclEntry row .1.3.6.1.4.1.29601.2.122.2.2.1

Each entry contains the information about access list

Indexes

fsIpv6SnpRagAclNo fsIpv6SnpRagAclEntryNo

Column	Syntax	OID
fsIpv6SnpRagAclNo Indicates the acl number for this entry. This acl number can be mapped to RA Guard policy entry to configure the matching criteria for the policy entry.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.29601.2.122.2.2.1.1
fsIpv6SnpRagAclEntryNo Indicates an entry associated with the acl number. For a single acl number, many entries can be created. Thus several MAC addresses can be associated to an acl number.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.29601.2.122.2.2.1.2
fsIpv6SnpRagAclSrcMacAddress Indicates the source Mac address associated with the acl-id.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.29601.2.122.2.2.1.3
fsIpv6SnpRagAclRowStatus This object is used to create or delete entry in the RA guard acl table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.122.2.2.1.4

This table contains Ipv6 address Prefix list information that can be  
set as match criteria in the RA Guard policy entry.
This can be used for validating the ipv6 address prefixes carried by incoming RA messages.

fsIpv6SnpRagPrefixListEntry row .1.3.6.1.4.1.29601.2.122.2.3.1

Each entry contains the Ipv6 address Prefixes used to validate the prefix information
carried in RA messages.

Indexes

fsIpv6SnpRagPrefixListNo fsIpv6SnpRagPrefixListEntryNo

Column	Syntax	OID
fsIpv6SnpRagPrefixListNo Indicates the Prefix-list number of this entry. This prefix-list number can be mapped to RA Guard policy entry to configure the matching criteria for the policy entry.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.29601.2.122.2.3.1.1
fsIpv6SnpRagPrefixListEntryNo Indicates entry number for each prefix. For a single prefix-list number, many entries can be created. Thus several prefixes can be associated to a prefix-list number.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.29601.2.122.2.3.1.2
fsIpv6SnpRagPrefixListPrefix Ipv6 prefix value of this entry.	Ipv6AddressPrefixr/w Type Constraints: range: 16	.1.3.6.1.4.1.29601.2.122.2.3.1.3
fsIpv6SnpRagPrefixListLength Indicates prefix length for each Ipv6 prefix	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.29601.2.122.2.3.1.4
fsIpv6SnpRagPrefixListGe Minimum prefix length to be matched Value 0 indicates that no miminum prefix lenth, and this check would be bypassed	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.29601.2.122.2.3.1.5
fsIpv6SnpRagPrefixListLe Maximum prefix length to be matched Value 0 indicates that no maximum prefix lenth, and this check would be bypassed	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.29601.2.122.2.3.1.6
fsIpv6SnpRagPrefixListRowStatus This object is used to create or delete entry in the prefix list table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.122.2.3.1.7

This table contains RA Guard interface specific configurations.

fsIpv6SnpRagPortEntry row .1.3.6.1.4.1.29601.2.122.2.4.1

Each row in this table contains the RA guard configuration information for
the interface.

Indexes

fsIpv6SnpRagPortNumber

Column	Syntax	OID
fsIpv6SnpRagPortNumber Indicates the inteface index for which RA guard configurations are applied.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.29601.2.122.2.4.1.1
fsIpv6SnpRagPortStatus Object to enable/disable the RA Guard feature on the port	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.29601.2.122.2.4.1.2
fsIpv6SnpRagPortPolicyId Indicates RA Guard policy ID applied to the interface. A value of 0 indicates that no policy is applied on the interface.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.122.2.4.1.3
fsIpv6SnpRagPortMode Indicates the mode in which RA Guard functions on this interface. It can be stateful or stateless.	Enumerationr/w Enumerated Values: 1 stateless 2 stateful	.1.3.6.1.4.1.29601.2.122.2.4.1.4
fsIpv6SnpRagPortCurrentState Indicates current state of the RA Guard on port while operating in stateful mode. In stateless mode of operation, this object is not applicble and indicates a value 'na'.	Enumeration Enumerated Values: 0 na 1 learn 2 forward 3 block	.1.3.6.1.4.1.29601.2.122.2.4.1.5
fsIpv6SnpRagPortTriggerStateChange This objects allows manual triggering for movement of port state to learning/forwarding or blocking. This object is applicable when RA guard feature works in stateful mode on the interface.	Enumerationr/w Enumerated Values: 0 none 1 learn 2 forward 3 block	.1.3.6.1.4.1.29601.2.122.2.4.1.6
fsIpv6SnpRagPortLearnTime When the port state change is triggered to 'learn', the port remains in the learning state for the 'Learn Time' duration. After this time, the port state moves to 'forwarding' state if legitimate RA messages are receiv…	secondsInteger32r/w Constraints: range: 180-900	.1.3.6.1.4.1.29601.2.122.2.4.1.7
fsIpv6SnpRagPortTrustState Indicates RA guard port trust state as trusted/untrusted. trusted : RA messages will be forwarded without any validation untrusted : RA messages will be forwarded based on the RA guard policy validation on the interfa…	Enumerationr/w Enumerated Values: 1 trusted 2 untrusted	.1.3.6.1.4.1.29601.2.122.2.4.1.8
fsIpv6SnpRagPortVlanlist This object indicates the list of VLAN on which the RA guard feature is applicable. When VLAN list is NULL, the RA guard configurations are applicable at port level and for all VLANs on the port. When VLAN list is confi…	VlanListr/w	.1.3.6.1.4.1.29601.2.122.2.4.1.9
fsIpv6SnpRagPortRowStatus This object is used to create or delete entry in the table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.122.2.4.1.10

This table contains Src Ipv6 Prefix List information that can 
be set as match criteria in the RA Guard policy entry.
This can be used for validating the Src IPv6 carried by 
incoming RA messages.

fsIpv6SnpRagSrcIPv6ListEntry row .1.3.6.1.4.1.29601.2.122.2.5.1

Each entry contains the Src Ipv6 Prefixes used to validate the prefix information
carried in RA messages.

Indexes

fsIpv6SnpRagSrcIPv6ListNo fsIpv6SnpRagSrcIPv6EntryNo

Column	Syntax	OID
fsIpv6SnpRagSrcIPv6ListNo Indicates the Src IPv6 Prefix-list number of this entry The Src IPv6 Prefix List number can be mapped to RA Guard policy entry to configure the matching criteria for the policy entry.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.29601.2.122.2.5.1.1
fsIpv6SnpRagSrcIPv6EntryNo Indicates entry number for each Src IPv6 prefix. For a single Src IPv6 prefix-list number, many entries can be created. Thus several Src IPv6 prefixes can be associated to a prefix-list number.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.29601.2.122.2.5.1.2
fsIpv6SnpRagSrcIPv6Addr Src Ipv6 prefix value of this entry	Ipv6AddressPrefixr/w Type Constraints: range: 16	.1.3.6.1.4.1.29601.2.122.2.5.1.3
fsIpv6SnpRagSrcIPv6PrefixLength Indicates prefix length for each Src Ipv6 prefix	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.29601.2.122.2.5.1.4
fsIpv6SnpRagSrcIPv6RowStatus This object is used to create or delete entry in the Src IPv6 Prefix List table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.122.2.5.1.5