ARICENT-IGMP-MIB Table View

This table contains the IGMP Statistic information 
for all the ports in the system.

fsIgmpInterfaceEntry row .1.3.6.1.4.1.2076.36.1.4.1

Each entry contains the necessary information of IGMP
statistics on a logical interface.

Indexes

fsIgmpInterfaceIfIndex

Column	Syntax	OID
fsIgmpInterfaceIfIndex The ifIndex value of the interface for which IGMP is enabled.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2076.36.1.4.1.1
fsIgmpInterfaceAdminStatus This gives the Administrative Status of the Interface.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2076.36.1.4.1.2
fsIgmpInterfaceFastLeaveStatus This variable controls the fast leave feature of the IGPMV3 protocol. Making this object 'enable'supports immediate intimation to the Multicast Routing Protocol on the last member leaving the Group. Making this objec…	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.2076.36.1.4.1.3
fsIgmpInterfaceOperStatus This gives the Operational Status of the Interface.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2076.36.1.4.1.4
fsIgmpInterfaceIncomingPkts The total number of IGMP Packets received by the router	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.5
fsIgmpInterfaceIncomingJoins The Total Incoming JoinGroupMessage counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.6
fsIgmpInterfaceIncomingLeaves The Total Incoming LeaveGroupMessage counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.7
fsIgmpInterfaceIncomingQueries The Total Incoming Queries counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.8
fsIgmpInterfaceOutgoingQueries The Total Outgoing Queries counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.9
fsIgmpInterfaceRxGenQueries Indicates the number of General Queries received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.10
fsIgmpInterfaceRxGrpQueries Indicates the number of Group specific queries received on this interface. This object is specific to IGMP Proxy implementation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.11
fsIgmpInterfaceRxGrpAndSrcQueries Indicates the number of Group and source specific queries received on this interface. This object is specific to IGMP Proxy implementation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.12
fsIgmpInterfaceRxv1v2Reports Indicates the number of IGMPv1 and IGMPv2 reports received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.13
fsIgmpInterfaceRxv3Reports Indicates the number of IGMPv3 reports received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.14
fsIgmpInterfaceTxGenQueries Indicates the number of General queries sent on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.15
fsIgmpInterfaceTxGrpQueries Indicates the number of Group specific queries sent on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.16
fsIgmpInterfaceTxGrpAndSrcQueries Indicates the number of Group and source specific queries sent on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.17
fsIgmpInterfaceTxv1v2Reports Indicates the number of IGMP v1/v2 reports sent on this interface. This object is specific to IGMP Proxy implementation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.18
fsIgmpInterfaceTxv3Reports Indicates the number of IGMP v3 reports sent on this interface. This object is specific to IGMP Proxy implementation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.19
fsIgmpInterfaceTxv2Leaves Indicates the number of IGMP v2 leaves sent on this interface. This object is specific to IGMP Proxy implementation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.20
fsIgmpInterfaceChannelTrackStatus This variable controls the explicit channel tracking feature of the IGPMV3 protocol. Configuring this object as 'enable' makes the router to keep track of each individual host that is joined to a particular multicast …	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.2076.36.1.4.1.21
fsIgmpInterfaceGroupListId This indicate the except group list id for an interface.This grouplist will be exempted for limiting on this interface	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2076.36.1.4.1.22
fsIgmpInterfaceLimit This indicates the total number of multicast groups that can be allowed for this interface. If fsIgmpInterfaceCurGrpCount reaches this InterfaceLimit value then no membership reports will be honored on this interface ex…	Unsigned32r/w Constraints: range: 1-4096	.1.3.6.1.4.1.2076.36.1.4.1.23
fsIgmpInterfaceCurGrpCount This object specifies the current count of groups that were added to the interface.This counter will be incremented for each valid membership report on this interface and decremented for leave report if fsIgmpInterfaceL…	Unsigned32 Constraints: range: 1-4096	.1.3.6.1.4.1.2076.36.1.4.1.24
fsIgmpInterfaceCKSumError This object displays the number of packets received with checksum error on an interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.25
fsIgmpInterfacePktLenError This object displays the number of packets received with packet length error on an interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.26
fsIgmpInterfacePktsWithLocalIP This object displays the number of packets received on an interface with local IP address as source address.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.27
fsIgmpInterfaceSubnetCheckFailure This object displays the number of packets dropped due to subnet check failure.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.28
fsIgmpInterfaceQryFromNonQuerier This object displays the number of queries received from a non-querier on an interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.29
fsIgmpInterfaceReportVersionMisMatch This object displays the number of reports received by with version mismatch on an interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.30
fsIgmpInterfaceQryVersionMisMatch This object displays the number of queries received with version mismatch on an interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.31
fsIgmpInterfaceUnknownMsgType This object displays the number of packets received with unknown message type on an interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.32
fsIgmpInterfaceInvalidV1Report This object displays the number of invalid V2 reports received on an interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.33
fsIgmpInterfaceInvalidV2Report This object displays the number of invalid V2 reports received on an interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.34
fsIgmpInterfaceInvalidV3Report This object displays the number of invalid V3 reports received on an interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.35
fsIgmpInterfaceRouterAlertCheckFailure This object displays the number of packets dropped due to router alert check failure.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.36
fsIgmpInterfaceIncomingSSMPkts This object displays the number of V3 reports received on an interface for SSM group range.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.37
fsIgmpInterfaceInvalidSSMPkts This object displays the number of invalid SSM v3 reports received on an interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.36.1.4.1.38
fsIgmpInterfaceJoinPktRate This object specifies the rate at which the join packets can be received on an interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2076.36.1.4.1.39

This table contains the IGMP group statistic information

fsIgmpCacheEntry row .1.3.6.1.4.1.2076.36.1.5.1

Each entry contains the necessary Statistics of Multicast
Groups

Indexes

fsIgmpCacheAddress fsIgmpCacheIfIndex

Column	Syntax	OID
fsIgmpCacheAddress The IP multicast group address for which this entry contains information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2076.36.1.5.1.1
fsIgmpCacheIfIndex The interface for which this entry contains information for an IP multicast group address.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2076.36.1.5.1.2
fsIgmpCacheGroupCompMode The Group Compatibility Mode of the particular Group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2076.36.1.5.1.3

This table contains the IGMP grouplist information. Multiple range of groups will be grouped to a list and list can be mapped to an interface to exempt limit on that interface. Group list can be configured for IPv4 multicast addresses.

fsIgmpGroupListEntry row .1.3.6.1.4.1.2076.36.1.6.1

Each entry contains information related to IGMP grouplist

Indexes

fsIgmpGrpListId fsIgmpGrpIP fsIgmpGrpPrefixLen

Column	Syntax	OID
fsIgmpGrpListId This indicates the Id of Group List	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2076.36.1.6.1.1
fsIgmpGrpIP This indicates the Group IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2076.36.1.6.1.2
fsIgmpGrpPrefixLen This indicates the Prefix Length.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2076.36.1.6.1.3
fsIgmpGrpListRowStatus RowStatus of GroupList record	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.36.1.6.1.4

This table contains the IGMP SSM Mapped group and source information. 
Multiple range of groups will be mapped to a single source address.

fsIgmpSSMMapGroupEntry row .1.3.6.1.4.1.2076.36.1.8.1

Each entry contains information about the range of group address
mapped to source address.

Indexes

fsIgmpSSMMapStartGrpAddress fsIgmpSSMMapEndGrpAddress fsIgmpSSMMapSourceAddress

Column	Syntax	OID
fsIgmpSSMMapStartGrpAddress This indicates the Start Group IP address for which SSM mapping has to be applied.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2076.36.1.8.1.1
fsIgmpSSMMapEndGrpAddress This indicates the End Group IP address upto which SSM mapping has to be applied.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2076.36.1.8.1.2
fsIgmpSSMMapSourceAddress This indicates the Source IP address that has to be mapped to the given group IP address range.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2076.36.1.8.1.3
fsIgmpSSMMapRowStatus RowStatus of SSM Mapped Multicast Group record	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.36.1.8.1.4