ARICENT-ESAT-CFG-MIB Table View

This table contains ESAT SLA configurations.

fsEsatSlaEntry row .1.3.6.1.4.1.29601.2.88.3.1

This entry contains information about a particular ESAT SLA
Configuration.

Indexes

fsEsatSlaId

Column	Syntax	OID
fsEsatSlaId This object specifies the ESAT Service Level Agreement Identifier. This is a free running index used to identify a SLA.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.29601.2.88.3.1.1
fsEsatSlaIfIndex This object specifies the Interface Index on which the ESAT test is performed.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.29601.2.88.3.1.2
fsEsatSlaEvcIndex This object specifies the service under test. The EVC is configured using the MEF MIB. Internally this object refers to fsEvcIndex in MEF MIB.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.29601.2.88.3.1.3
fsEsatSlaMEG This object specifies the Maintenance Entity Group (MEG) of the fsEsatSlaEntry. Internally this object refers to MIB object dot1agCfmMdIndex of ECFM 802.1ag standard.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.88.3.1.4
fsEsatSlaME This object specifies the Maintenance Entity (ME) of the fsEsatSlaEntry. Internally this object refers to MIB object dot1agCfmMaIndex of ECFM 802.1ag standard.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.88.3.1.5
fsEsatSlaMEP This object specifies the Maintenance Association End Point (MEP) of the fsEsatSlaEntry. Internally this object refers to MIB object dot1agCfmMepIdentifier of ECFM 802.1ag standard.	Unsigned32r/w Constraints: range: 1-8191	.1.3.6.1.4.1.29601.2.88.3.1.6
fsEsatSlaRateStep This object specifies the step load CIR (Committed Information Rate) configuration test. If no value is provided, 25% of CIR is sent first, followed by 50% of CIR and so on; the complete CIR is generated in 4 steps. F…	Integer32r/w Constraints: range: 10-100	.1.3.6.1.4.1.29601.2.88.3.1.7
fsEsatSlaFreqDelay This object specifies the delay in seconds between each packet part of the traffic generation.	Integer32r/w Constraints: range: 0-60	.1.3.6.1.4.1.29601.2.88.3.1.8
fsEsatSlaDuration This object specifies the duration of the complete Ethernet Service Activation Test in seconds. For CIR configuration test, the CIR traffic is generated for the configured duration. For step load CIR configuration test…	Integer32r/w Constraints: range: 1-3600	.1.3.6.1.4.1.29601.2.88.3.1.9
fsEsatSlaDirection This object specifies the direction of the measurements . In a bridge, the performance measurements can be done either at user-to-network interface (UNI)port or network-to-network interface (NNI) port. If the direction…	Enumerationr/w Enumerated Values: 1 external 2 internal	.1.3.6.1.4.1.29601.2.88.3.1.10
fsEsatSlaTrafProfileId This object specifies the Traffic Profile to which the SLA is currently mapped. Multiple packet profiles can be created and each can be associated to a given SLA. Each packet profile contains packet information such a…	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.29601.2.88.3.1.11
fsEsatSlaSacId This object specifies the Service Acceptance Criteria to which the SLA is currently mapped. Multiple SACs can be created and each can be associated to a given SLA. Each SAC refers to the minimum Information rate, frame …	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.29601.2.88.3.1.12
fsEsatSlaStatus This object specifies the ESAT SLA status. It is used to start or stop the SLA under test.	Enumerationr/w Enumerated Values: 1 start 2 stop	.1.3.6.1.4.1.29601.2.88.3.1.13
fsEsatSlaRowStatus This object specifies the row status and is used to create or deletea new entry by setting this object to the appropriate value as mentioned in SMI-v2.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.88.3.1.14

This table contains Traffic Profile configurations.

fsEsatTrafProfEntry row .1.3.6.1.4.1.29601.2.88.4.1

This entry contains information about a particular Traffic Profile configuration.

Indexes

fsEsatTrafProfId

Column	Syntax	OID
fsEsatTrafProfId This object specifies the ESAT Traffic Profile Identifier. This is a free running index.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.29601.2.88.4.1.1
fsEsatTrafProfDir This object specifies the direction of ESAT Traffic Profile Generation. When this object is set as external, the traffic is generated at the wire-side of network-to-network interface (NNI) and is transmitted to the re…	Enumerationr/w Enumerated Values: 1 external 2 internal	.1.3.6.1.4.1.29601.2.88.4.1.2
fsEsatTrafProfTagType This object specifies the type of ESAT vlan tag to be used for Traffic Profile Generation. This specifies the type of packet to be used to generate traffic.	Enumerationr/w Enumerated Values: 1 untagged 2 singletagged 3 doubletagged 4 prioritytagged	.1.3.6.1.4.1.29601.2.88.4.1.3
fsEsatTrafProfInVlan This object specifies the the VLAN ID for the inner vlan tag of the interface from which the message will be sent. This is applicable if the fsEsatTrafProfTagType is single tagged or double tagged.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.29601.2.88.4.1.4
fsEsatTrafProfOutVlan This object specifies the ESAT Outer VLAN ID to be used as part of profile frame. This is applicable if the fsEsatTrafProfTagType is double tagged.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.29601.2.88.4.1.5
fsEsatTrafProfInCos This object specifies the class of service (CoS) value for the inner VLAN tag of the interface from which the message will be sent. This is applicable if the fsEsatTrafProfTagType is single tagged, double tagged or pr…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.88.4.1.6
fsEsatTrafProfOutCos This object specifies the ESAT Outer Class of Service to be used as part of profile frame. This is applicable if the fsEsatTrafProfTagType is double tagged	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.88.4.1.7
fsEsatTrafProfPktSize This object specifies the ESAT Traffic Profile Packet Size in bytes.	Integer32r/w Constraints: range: 64-1518	.1.3.6.1.4.1.29601.2.88.4.1.8
fsEsatTrafProfSrcMac This object specifies the ESAT Source MAC address in the packet profile.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.29601.2.88.4.1.9
fsEsatTrafProfDestMac This object specifies the ESAT Destination MAC address in the packet profile.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.29601.2.88.4.1.10
fsEsatTrafProfPayload This object specifies the ESAT Payload in the packet profile.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.29601.2.88.4.1.11
fsEsatTrafProfRowStatus This object sp;ecifies the row status and is used to create or delete a new entry by setting this object to the appropriate value as mentioned in SMI-v2.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.88.4.1.12

This table contains Service Acceptance Criteria Profile configuration. 
Service Acceptance Criteria (SAC) is a set of criteria used to ensure that a service meets its
functionality and quality requirement and that the service is ready to operate when it has been
deployed.

fsEsatSacEntry row .1.3.6.1.4.1.29601.2.88.5.1

This entry contains information about a particular SAC Profile configuration.

Indexes

fsEsatSacId

Column	Syntax	OID
fsEsatSacId This object specifies the ESAT SAC Identifier used to identify a particular SAC entry.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.29601.2.88.5.1.1
fsEsatSacInfoRate This object specifies the ESAT Information Rate configured as part of this SAC. This is the minimum Information Rate above which a test is declared fail. Information rate is a bit rate measure of available or consumed…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.88.5.1.2
fsEsatSacFrLossRatio This object specifies the ESAT Frame Loss Ratio (FLR) configured as part of this SAC. This is the minimum frame loss ratio above which a test is declared fail. Frame Loss Ratio measures the number of packets lost over…	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.29601.2.88.5.1.3
fsEsatSacFrTxDelay This object specifies the ESAT Frame Transfer Delay (FTD)configured as part of this SAC. This is the minimum frame transfer delay (in milliseconds)above which a test is declared fail. Frame Transfer delay measures the…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.88.5.1.4
fsEsatSacFrDelayVar This object specifies the ESAT Frame Delay Variation configured as part of this SAC. This is the minimum frame delay variation (in milliseconds) above which a test is declared fail. Frame Delay Variation (FDV) measure…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.88.5.1.5
fsEsatSacRowStatus This object specifies the row status and is used to create or delete a new entry by setting this object to the appropriate value as mentioned in SMI-v2.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.88.5.1.6

This table contains the statistics of the SLA operation performed.

fsEsatStatsEntry row .1.3.6.1.4.1.29601.2.88.6.1

This entry specifies the statistics about a particular step in the SLA operation performed.

Indexes

fsEsatSlaId fsEsatStatsStepId

Column	Syntax	OID
fsEsatStatsStepId This object specifies the ESAT Step Index in SLA operation statistics. A report is generated for each fsEsatSlaRateStep configured.. CIR configuration testis performed only in one step.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.29601.2.88.6.1.1
fsEsatStatsResult This oject specifies the step result for Ethernet Service Activation Test	Enumeration Enumerated Values: 1 pass 2 fail	.1.3.6.1.4.1.29601.2.88.6.1.2
fsEsatStatsDuration This object specifies the duration of the step of Ethernet Service Activation Test .	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.88.6.1.3
fsEsatStatsTxPkts This object specifies the number of packets transmitted during the step test. If the target does not support this counter, this value is maintanined as zero	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.88.6.1.4
fsEsatStatsTxBytes This object specifies the number of bytes transmitted during the step test. If the target does not support this counter, this value is maintanined as zero	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.29601.2.88.6.1.5
fsEsatStatsRxPkts This object specifies the number of packets received during the step test. If the target does not support this counter, this value is maintained as zero	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.88.6.1.6
fsEsatStatsRxBytes This object specifies the number of bytes received during the step test. If the target does not support this counter, value shall be zero	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.29601.2.88.6.1.7
fsEsatStatsIrMin This object specifies the Minimum Information Rate for the step test.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.88.6.1.8
fsEsatStatsIrMean This object specifies the Mean Information Rate for the step test.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.88.6.1.9
fsEsatStatsIrMax This object specifies the Maximum Information Rate for step test.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.88.6.1.10
fsEsatStatsFrLossCnt This object specifies the number of frames lost during the step test.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.88.6.1.11
fsEsatStatsFrLossRatio This object specifies the Frame Loss Ratio observed during the step test.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.88.6.1.12
fsEsatStatsFrTxDelayMin This object specifies the Minimum Frame Transfer Delay observed during the step test.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.88.6.1.13
fsEsatStatsFrTxDelayMean This object specifies the Mean Frame Transfer Delay observed during the step test.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.88.6.1.14
fsEsatStatsFrTxDelayMax This object specifies the Maximum Frame Transfer Delay observed during the step test.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.88.6.1.15
fsEsatStatsFrDelayVarMin This object specifies the Minimum Frame Delay Variation observed during the step test.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.88.6.1.16
fsEsatStatsFrDelayVarMean This object specifies the Mean Frame Delay Variation observed during the step test.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.88.6.1.17
fsEsatStatsFrDelayVarMax This object specifies the Maximum Frame Delay Variation observed during the step test.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.88.6.1.18
fsEsatStatsPortStateCounter This object specifies the number of times the port has toggled during each step test.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.88.6.1.19