ARICENT-DHCP-RLY-MI-MIB Table View

This context table contains the global parameters of DHCP Relay 
that is required to be configured for each context.

fsMIDhcpContextEntry row .1.3.6.1.4.1.29601.2.92.2.1.1

An Entry for the configuration in a particular VR.

Indexes

fsMIDhcpContextId

Column	Syntax	OID
fsMIDhcpContextId The index value that uniquely identifies the virtual router in which the configuration is done.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.92.2.1.1.1
fsMIDhcpRelaying Only when enabled, the Relay Agent shall become active.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.29601.2.92.2.1.1.2
fsMIDhcpRelayServersOnly When enabled, the Relay Agent shall forward the packets from the client to a specific DHCP server.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.29601.2.92.2.1.1.3
fsMIDhcpRelaySecsThreshold IF the secs field in the DHCP message is greater than the fsMIDhcpRelaySecsThreshold, Packet get dropped at the Relay Agent	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.92.2.1.1.4
fsMIDhcpRelayHopsThreshold A maximum hop count,a relay agent allow to pass through it.If the HopCount in the Dhcp Message is greater than the fsMIDhcpRelayHopsThreshold, Packet get dropped at the Relay Agent	Integer32r/w Constraints: range: 0-16	.1.3.6.1.4.1.29601.2.92.2.1.1.5
fsMIDhcpRelayRAIOptionControl Only when enabled, the Relay Agent shall do any processing related to Relay Agent Information Options - like inserting the necessary options while relaying a packet from a client to a server and examining/stripping of o…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.29601.2.92.2.1.1.6
fsMIDhcpRelayRAICircuitIDSubOptionControl When enabled, if the RAIOption is globally enabled, then the Relay Agent shall insert the CircuitID sub-option, when necessary, while relaying packets from a client to server and also examines/strips off this sub-opti…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.29601.2.92.2.1.1.7
fsMIDhcpRelayRAIRemoteIDSubOptionControl When enabled, if the RAIOption is globally enabled, then the Relay Agent shall insert the RemoteID sub-option, when necessary, while relaying packets from a client to server and also examines/strips off this sub-optio…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.29601.2.92.2.1.1.8
fsMIDhcpRelayRAISubnetMaskSubOptionControl When enabled, if the RAIOption is globally enabled, then the Relay Agent shall insert the Subnet Mask sub-option, when necessary, while relaying packets from a client to server and also examines/strips off this sub-op…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.29601.2.92.2.1.1.9
fsMIDhcpRelayRAIOptionInserted Number of packets in which the RelayAgent inserted the RAIOption.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.92.2.1.1.10
fsMIDhcpRelayRAICircuitIDSubOptionInserted Number of packets in which the RelayAgent inserted the CircuitID SubOption.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.92.2.1.1.11
fsMIDhcpRelayRAIRemoteIDSubOptionInserted Number of packets in which the RelayAgent inserted the RemoteID SubOption.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.92.2.1.1.12
fsMIDhcpRelayRAISubnetMaskSubOptionInserted Number of packets in which the RelayAgent inserted the SubnetMask SubOption.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.92.2.1.1.13
fsMIDhcpRelayRAIOptionWronglySet Number of packets dropped by the Relay Agent because the giaddr field is not set but the RAI option exists in the packet.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.92.2.1.1.14
fsMIDhcpRelayRAISpaceConstraint Number of packets in which the RAI Option wasnot inserted by the Relay Agent because if inserted the packetsize shall exceed the MTU.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.92.2.1.1.15
fsMIDhcpConfigTraceLevel The Trace level Object which has bit masks for various levels of tracing	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.29601.2.92.2.1.1.16
fsMIDhcpConfigDhcpCircuitOption This Object defines the type of information to be present in circuit id sub-option.And this option can specfied only if CircuitIDSubOptionControl is enabled.It is possible to set more than one bit at a time.Currentl…	Bitsr/w Enumerated Values: 0 routerindex 1 vlanid 2 recvport	.1.3.6.1.4.1.29601.2.92.2.1.1.17
fsMIDhcpRelayCounterReset This object is used to reset the statistics counters. When set to set(1), statistics counters will be cleared. When set to notset(2), no action will take place.	Enumerationr/w Enumerated Values: 1 set 2 notset	.1.3.6.1.4.1.29601.2.92.2.1.1.18
fsMIDhcpRelayContextRowStatus Row status of this table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.92.2.1.1.19
fsMIDhcpRelayRAIVPNIDSubOptionControl This object When enabled & if the RAIOption is globally enabled along with VRF, then the Relay Agent shall insert the VRF name in the VPN identifier sub-option, Link Selection sub-option and server identifier override …	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.29601.2.92.2.1.1.20

This table contains the IP addresses of the DHCP Server 
to which the Relay Agent needs to forward the packets from 
the client. This object becomes active only when 
dhcpRelayServersOnly is enabled.

fsMIDhcpRelaySrvAddressEntry row .1.3.6.1.4.1.29601.2.92.2.2.1

Indexes

fsMIDhcpContextId fsMIDhcpRelaySrvIpAddress

Column	Syntax	OID
fsMIDhcpRelaySrvIpAddress The IP Address of the DHCP server.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.29601.2.92.2.2.1.1
fsMIDhcpRelaySrvAddressRowStatus RowStatus of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.92.2.2.1.2

This table holds the circuit id SubOption configured over the
interface.This option will be inserted for dhcp request packets 
received on this interface based on the status of 
fsMIDhcpRelayRAICircuitIDSubOptionControl.Using this table,the dhcp 
broadcast response is sent on the appropriate interface over which 
the broadcast dhcp request was received.

fsMIDhcpRelayIfEntry row .1.3.6.1.4.1.29601.2.92.2.3.1

Contains configured dhcp relay information suboptions

Indexes

fsMIDhcpContextId IF-MIBifIndex

Column	Syntax	OID
fsMIDhcpRelayIfCircuitId Circuit Id value configured over this interface.Configuring with zero value will reset the circuit id configuration for this interface.Circuit id will be inserted to dhcp request packet received on this interface if…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.92.2.3.1.1
fsMIDhcpRelayIfRemoteId Remote Id value configured over this interface.String of length zero will reset the configuration.Value other than XYZ (which is the considered as default value internally) can be configured for this object.Configuring…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.29601.2.92.2.3.1.2
fsMIDhcpRelayIfRowStatus Row status of this table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.92.2.3.1.3

This table contains interface-specific DHCP Servers
to which which the Relay Agent needs to forward the packets from
the client. If interface-specific DHCP Servers are configured,
they will be used instead of globally configured ones for the packets,
relayed over the interface.

fsMIDhcpRelayIfServerEntry row .1.3.6.1.4.1.29601.2.92.2.4.1

DHCP Server entry.

Indexes

fsMIDhcpContextId IF-MIBifIndex fsMIDhcpRelayIfServerIpAddress

Column	Syntax	OID
fsMIDhcpRelayIfServerIpAddress The IP Address of the DHCP server.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.29601.2.92.2.4.1.1
fsMIDhcpRelayIfServerRowStatus RowStatus of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.92.2.4.1.2

This table holds optional interface-specific Relay Agent configurables,
excluding DHCP suboptions.

fsMIDhcpRelayIfExtensionEntry row .1.3.6.1.4.1.29601.2.92.2.5.1

Contains the status of DHCP Relay Agent on this interface.

Indexes

fsMIDhcpContextId IF-MIBifIndex

Column	Syntax	OID
fsMIDhcpRelayIfExtensionRelayEnabled The Relaying Agent status on this interface. If disabled, DHCP broadcast packets, arriving on this interface, will not be relayed.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.29601.2.92.2.5.1.1
fsMIDhcpRelayIfExtensionRowStatus RowStatus of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.92.2.5.1.2