ARICENT-DCB-MIB Table View

Port table contains the DCB features 
(Enhanced Transmission Selection/Priortiy Based Flow Control/Application priority) 
status (enabled or disabled) and DCBX version details

fsDcbPortEntry row .1.3.6.1.4.1.29601.2.22.2.1.1

An entry containing DCB control parameters for a particular port.

Indexes

fsDcbPortNumber

Column	Syntax	OID
fsDcbPortNumber This indicates the interface identifier for which the Dcb configuration is applied.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.29601.2.22.2.1.1.1
fsDcbETSAdminStatus This object enables or disables ETS feature on the given port. If set to 'enabled(1)', ETS feature will be enabled on this port. If set to 'disabled(2)', ETS feature will be disabled on…	EnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.22.2.1.1.2
fsDcbPFCAdminStatus This object enables or disables PFC feature on the given port. If set to 'enabled(1)', PFC feature will be enabled on this port. If set to 'disabled(2)', PFC feature will be disabled on t…	EnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.22.2.1.1.3
fsDcbRowStatus This object is used to create and delete a row in this table. Only 'createAndGo', and 'destroy' values are allowed for this object. 'createAndWait' and 'notInService' values are not allowed. …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.22.2.1.1.4
fsDcbAppPriAdminStatus This object enables or disables PFC feature on the given port. If set to 'enabled(1)', Application priority feature will be enabled on this port. If set to 'disabled(2)', Application prior…	EnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.22.2.1.1.5
fsDcbOperVersion This object specifies the Operating version of the DCBX protocol in which the system adjusts as needed to operate at the highest version supported by both link partners.	DcbxVersion Type Values: 1 auto 2 ieee 3 cee 4 unknown	.1.3.6.1.4.1.29601.2.22.2.1.1.6
fsDcbMaxVersion This object specifies the Highest DCBX protocol version supported by the local system.	DcbxVersion Type Values: 1 auto 2 ieee 3 cee 4 unknown	.1.3.6.1.4.1.29601.2.22.2.1.1.7
fsDcbPeerOperVersion This object specifies the Operating version of the DCBX protocol for peer in which the system adjusts as needed to operate at the highest version supported by both link partners.	DcbxVersion Type Values: 1 auto 2 ieee 3 cee 4 unknown	.1.3.6.1.4.1.29601.2.22.2.1.1.8
fsDcbPeerMaxVersion This object specifies the Highest DCBX protocol version supported by the peer system.	DcbxVersion Type Values: 1 auto 2 ieee 3 cee 4 unknown	.1.3.6.1.4.1.29601.2.22.2.1.1.9

Port table contains the DCBX feature status (enabled or disabled).

fsDCBXPortEntry row .1.3.6.1.4.1.29601.2.22.3.1.2.1

An entry containing DCBX control parameters for a particular port.

Indexes

fsDCBXPortNumber

Column	Syntax	OID
fsDCBXPortNumber This indicates the interface identifier for which the DCBX configuration is applied.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.29601.2.22.3.1.2.1.1
fsDCBXAdminStatus This object is used to enable or disable DCBX feature on the given port. If set to 'enabled(1)', DCBX feature will be enabled on this port. This will start the state machine for the feature for which t…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.22.3.1.2.1.2
fsDCBXMode This object specifies the mode of the DCBX in which the operating version will be elected dynamically based on TLV exchange when the Auto mode is selected. In auto mode, operating version is determined based on IEEE…	DcbxVersionr/w Type Values: 1 auto 2 ieee 3 cee 4 unknown	.1.3.6.1.4.1.29601.2.22.3.1.2.1.3

ETS Port table contains the ETS (Enhanced Transmission Selection) features 
information specific to this port. 
          
 An entry created in this table in the following tables in the standard 
 DCBX MIB for this port.
 lldpXdot1dcbxConfigTCSupportedTable,
 lldpXdot1dcbxConfigETSConfigurationTable,
 lldpXdot1dcbxConfigETSRecommendationTable,
 lldpXdot1dcbxLocTCSupportedTable,
 lldpXdot1dcbxLocETSBasicConfigurationTable,
 lldpXdot1dcbxLocETSConPriorityAssignmentTable,
 lldpXdot1dcbxLocETSRecommendationTable,
 lldpXdot1dcbxAdminTCSupportedTable,
 lldpXdot1dcbxAdminETSBasicConfigurationTable,
 lldpXdot1dcbxAdminETSConPriorityAssignmentTable,
 lldpXdot1dcbxAdminETSRecommendationTable.
          
 Deletion of entry in this table deletes all the entries in the above tables 
 in the standard DCBX MIB for this port.

fsETSPortEntry row .1.3.6.1.4.1.29601.2.22.3.2.2.1

An entry containing ETS control parameters and ETS information
for a particular port.

Indexes

fsETSPortNumber

Column	Syntax	OID
fsETSPortNumber This indicates the interface identifier for which the ETS configuration is applied.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.29601.2.22.3.2.2.1.1
fsETSAdminMode This object is used to configure administrative mode for ETS feature on the given port. If set to 'auto(0)', and if ETS feature is enabled on this port then all the operational(local) parameters for th…	DcbAdminModer/w Type Values: 0 auto 1 on 2 off	.1.3.6.1.4.1.29601.2.22.3.2.2.1.2
fsETSDcbxOperState This object is used to display the current state of the DCBX state machine for the ETS feature on the given port. If state is Off '(0)', then ETS Operational(local) parameters will be same as ETS administ…	DcbState Type Values: 0 off 1 init 2 rxrecommended 3 ceedisabled 4 uselocalcfg 5 usepeercfg	.1.3.6.1.4.1.29601.2.22.3.2.2.1.3
fsETSDcbxStateMachine This object is used to display the DCBX state machine type that is used by the ETS feature on the given port.	DcbStateMachineType Type Values: 1 asymmetric 2 symmetric 3 feature	.1.3.6.1.4.1.29601.2.22.3.2.2.1.4
fsETSClearTLVCounters This object when set to TRUE, clears the following counters associated with a Port: fsETSConfTxTLVCounter, fsETSConfRxTLVCounter, fsETSConfRxTLVErrors, fsETSRecoTxTLVCounter, fsETSRecoRxTLVCounter,…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.22.3.2.2.1.5
fsETSConfTxTLVCounter This object is used to keep track of the number of ETS configuration TLV that are transmitted from this port. This counter will be incremented every time when there is ETS Configuration TLV is generated and transmitt…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.2.2.1.6
fsETSConfRxTLVCounter This object is used to keep track of the number of ETS ConfigurationTLV that are received in this port. This counter will be incremented every time when there is ETS Configuration TLV is received from the LLDP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.2.2.1.7
fsETSConfRxTLVErrors This object is used to keep track of number of malformed ETS Configuration TLVs received by ETS. This counter will be incremented every time a ETS Configuration TLV is dropped by ETS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.2.2.1.8
fsETSRecoTxTLVCounter This object is used to keep track of the number of ETS Recommendation TLV that are transmitted from this port. This counter will be incremented every time when there is ETS Recommendation TLV is generated and transmi…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.2.2.1.9
fsETSRecoRxTLVCounter This object is used to keep track of the number of ETS Recommendation TLV that are received in this port. This counter will be incremented every time when there is ETS Recommendation TLV is received from the LLDP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.2.2.1.10
fsETSRecoRxTLVErrors This object is used to keep track of number of malformed ETS Recommendation TLVs received by ETS. This counter will be incremented every time a ETS Recommendation TLV is dropped by ETS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.2.2.1.11
fsETSTcSuppTxTLVCounter This object is used to keep track of the number of TC Supported TLV that are transmitted from this port. This counter will be incremented every time when there is TC Supported TLV is generated and transmitted to the…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.2.2.1.12
fsETSTcSuppRxTLVCounter This object is used to keep track of the number of TC Supported TLV that are received in this port. This counter will be incremented every time when there is TC Supported TLV is received from the LLDP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.2.2.1.13
fsETSTcSuppRxTLVErrors This object is used to keep track of number of malformed TC Supported TLVs received by ETS. This counter will be incremented every time a TC Supported TLV is dropped by ETS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.2.2.1.14
fsETSRowStatus This object is used to create and delete a row in this table. Only 'createAndGo', and 'destroy' values are allowed for this object. 'createAndWait' and 'notInService' values are not allowed. …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.22.3.2.2.1.15
fsETSSyncd This object indicates whether the current DesiredConfig has been received by the peer, and is applicable only when the DCBX operating version is CEE	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.22.3.2.2.1.16
fsETSError This object indicates that an error has occurred during the configuration exchange with the peer. Error is also set to TRUE when the Compatible method for the feature fails. This object is applicable only when the DC…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.22.3.2.2.1.17
fsETSDcbxStatus This object indicates the current DCBX status of the ETS feature .	DcbxStatus Type Values: 1 peerNotAdvFeat 2 peerNotAdvDcbx 3 notAdvertise 4 disabled 5 peerDisabled 6 peerInError 7 peerNWillingCompatibleCfg 8 cfgNotCompatible 9 ok 10 unknown	.1.3.6.1.4.1.29601.2.22.3.2.2.1.18

PFC Port table contains the PFC (Priortiy Based Flow Control) features 
information specific to this port. 
          
 An entry created in the port table populates the entry in this table and 
 in the following tables in the standard DCBX Mib for this port. 
 lldpXdot1dcbxConfigPFCTable,
 lldpXdot1dcbxLocPFCBasicTable,
 lldpXdot1dcbxLocPFCEnableTable,
 lldpXdot1dcbxAdminPFCBasicTable,
 lldpXdot1dcbxAdminPFCEnableTable.
           
 Deletion of entry in the port table deletes the entry in this table and
 all the entries in the above tables in the standard DCBX mib for this port.

fsPFCPortEntry row .1.3.6.1.4.1.29601.2.22.3.3.2.1

An entry containing PFC control parameters and PFC information
for a particular port.

Indexes

fsPFCPortNumber

Column	Syntax	OID
fsPFCPortNumber This indicates the interface identifier for which the PFC configuration is applied.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.29601.2.22.3.3.2.1.1
fsPFCAdminMode This object is used to configure administrative mode for PFC feature on the given port. If set to 'auto(0)', and if PFC feature is enabled on this port then all the opertaional(local) parameters for th…	DcbAdminModer/w Type Values: 0 auto 1 on 2 off	.1.3.6.1.4.1.29601.2.22.3.3.2.1.2
fsPFCDcbxOperState This object is used to display the current state of the DCBX state machine for the PFC feature on the given port. If state is Off '(1)', then PFC Operational(local) parameters will be same as PFC administ…	DcbState Type Values: 0 off 1 init 2 rxrecommended 3 ceedisabled 4 uselocalcfg 5 usepeercfg	.1.3.6.1.4.1.29601.2.22.3.3.2.1.3
fsPFCDcbxStateMachine This object is used to display the DCBX state machine type that is used by the PFC feature on the given port.	DcbStateMachineType Type Values: 1 asymmetric 2 symmetric 3 feature	.1.3.6.1.4.1.29601.2.22.3.3.2.1.4
fsPFCClearTLVCounters This object when set to TRUE, clears the following counters associated with a Port: fsPFCTxTLVCounter, fsPFCRxTLVCounter, fsPFCRxTLVErrors. Setting this object to FALSE has no effect. This ob…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.22.3.3.2.1.5
fsPFCTxTLVCounter This object is used to keep track of the number of PFC TLV that are transmitted from this port. This counter will be incremented every time when there is PFC TLV is generated and transmitted to the LLDP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.6
fsPFCRxTLVCounter This object is used to keep track of the number of PFC TLV that are received in this port. This counter will be incremented every time when there is PFC TLV is received from the LLDP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.7
fsPFCRxTLVErrors This object is used to keep track of number of malformed TLVs received by PFC. This counter will be incremented every time a PFC-TLV is dropped by PFC.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.8
fsPFCRowStatus This object is used to create and delete a row in this table. Only 'createAndGo', and 'destroy' values are allowed for this object. 'createAndWait' and 'notInService' values are not allowed. …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.22.3.3.2.1.9
fsPFCSyncd This object indicates whether the current DesiredConfig has been received by the peer, and is applicable only when the DCBX operating version is CEE	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.22.3.3.2.1.10
fsPFCError This object indicates that an error has occurred during the configuration exchange with the peer. Error is also set to TRUE when the Compatible method for the feature fails.This object is applicable only when the DCB…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.22.3.3.2.1.11
fsPFCDcbxStatus This object indicates the current DCBX status of the PFC feature .	DcbxStatus Type Values: 1 peerNotAdvFeat 2 peerNotAdvDcbx 3 notAdvertise 4 disabled 5 peerDisabled 6 peerInError 7 peerNWillingCompatibleCfg 8 cfgNotCompatible 9 ok 10 unknown	.1.3.6.1.4.1.29601.2.22.3.3.2.1.12
fsPFCRxPauseFrameCounter This object is used to keep track of total number of PFC Control Frame that are received in this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.13
fsPFCTxPauseFrameCounter This object is used to keep track of total number of PFC Control Frames that are transmitted from this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.14
fsPFCRxPauseFrameP0Counter This object is used to keep track of number of PFC Control Frames with Priority 0 that are received in this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.15
fsPFCRxPauseFrameP1Counter This object is used to keep track of number of PFC Control Frames with Priority 1 that are received in this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.16
fsPFCRxPauseFrameP2Counter This object is used to keep track of number of PFC Control Frames with Priority 2 that are received in this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.17
fsPFCRxPauseFrameP3Counter This object is used to keep track of number of PFC Control Frames with Priority 3 that are received in this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.18
fsPFCRxPauseFrameP4Counter This object is used to keep track of number of PFC Control Frames with Priority 4 that are received in this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.19
fsPFCRxPauseFrameP5Counter This object is used to keep track of number of PFC Control Frames with Priority 5 that are received in this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.20
fsPFCRxPauseFrameP6Counter This object is used to keep track of number of PFC Control Frames with Priority 6 that are received in this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.21
fsPFCRxPauseFrameP7Counter This object is used to keep track of number of PFC Control Frames with Priority 7 that are received in this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.22
fsPFCTxPauseFrameP0Counter This object is used to keep track of number of PFC Control Frames with Priority 0 that are transmitted from this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.23
fsPFCTxPauseFrameP1Counter This object is used to keep track of number of PFC Control Frames with Priority 1 that are transmitted from this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.24
fsPFCTxPauseFrameP2Counter This object is used to keep track of number of PFC Control Frames with Priority 2 that are transmitted from this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.25
fsPFCTxPauseFrameP3Counter This object is used to keep track of number of PFC Control Frames with Priority 3 that are transmitted from this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.26
fsPFCTxPauseFrameP4Counter This object is used to keep track of number of PFC Control Frames with Priority 4 that are transmitted from this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.27
fsPFCTxPauseFrameP5Counter This object is used to keep track of number of PFC Control Frames with Priority 5 that are transmitted from this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.28
fsPFCTxPauseFrameP6Counter This object is used to keep track of number of PFC Control Frames with Priority 6 that are transmitted from this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.29
fsPFCTxPauseFrameP7Counter This object is used to keep track of number of PFC Control Frames with Priority 7 that are transmitted from this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.30
fsPFCDataFrameDiscardCounter This object is used to keep track of number of data frames discarded	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.3.2.1.31
fsPFCClearPauseFrameCounters This object clears the following counters associated with a Port when set to TRUE fsPFCRxControlFrame, fsPFCTxControlFrame, fsPFCRxFramePriority0-7, fsPFCTxFramePriority0-7. Setting this o…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.22.3.3.2.1.32

Application Priority Port table contains the application priority feature's 
information specific to this port. 
          
 An entry created in the port table populates the entry in this table and 
 in the following tables in the standard DCBX Mib for this port. 
 lldpXdot1dcbxConfigAppPriTable,
 lldpXdot1dcbxLocAppPriBasicTable,
 lldpXdot1dcbxLocAppPriEnableTable,
 lldpXdot1dcbxAdminAppPriBasicTable,
 lldpXdot1dcbxAdminAppPriEnableTable.
           
 Deletion of entry in the port table deletes the entry in this table and
 all the entries in the above tables in the standard DCBX mib for this port.

fsAppPriPortEntry row .1.3.6.1.4.1.29601.2.22.3.4.2.1

An entry containing application priority control parameters and
application priority information for a particular port.

Indexes

fsAppPriPortNumber

Column	Syntax	OID
fsAppPriPortNumber This indicates the interface identifier for which the application priority configuration is applied.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.29601.2.22.3.4.2.1.1
fsAppPriAdminMode This object is used to configure the admin mode for application priority feature on the given port. - If this object is configured as 'auto(0)' on a port then all the operational(local) parame…	DcbAdminModer/w Type Values: 0 auto 1 on 2 off	.1.3.6.1.4.1.29601.2.22.3.4.2.1.2
fsAppPriDcbxOperState This object is used to display the current state of the DCBX state machine for the application priority feature on the given port. If state is Off '(1)', then application priority Operational(local) para…	DcbState Type Values: 0 off 1 init 2 rxrecommended 3 ceedisabled 4 uselocalcfg 5 usepeercfg	.1.3.6.1.4.1.29601.2.22.3.4.2.1.3
fsAppPriDcbxStateMachine This object is used to display the DCBX state machine type that is used by the application priority feature on the given port.	DcbStateMachineType Type Values: 1 asymmetric 2 symmetric 3 feature	.1.3.6.1.4.1.29601.2.22.3.4.2.1.4
fsAppPriClearTLVCounters This object when set to TRUE, clears the following counters associated with this port and resets its value to FALSE: fsAppPriTxTLVCounter, fsAppPriRxTLVCounter, fsAppPriRxTLVErrors. Setting th…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.22.3.4.2.1.5
fsAppPriTxTLVCounter This object is used to keep track of the number of application priority TLVs that are transmitted from the port. This counter will be incremented every time an application priority TLV is generated and transmitted to…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.4.2.1.6
fsAppPriRxTLVCounter This object indicates the number of application priority TLVs that are received in this port. This counter will be incremented every time when there is application priority TLV is received from LLDP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.4.2.1.7
fsAppPriRxTLVErrors This object indicates the number of malformed TLVs received by application priority module. This counter will be incremented every time an application priority TLV is dropped by the application priority module.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.4.2.1.8
fsAppPriAppProtocols This object indicates the total number of application priority entries present in the last TLV received from its peer	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.4.2.1.9
fsAppPriRowStatus This object is used to create and delete a row in this table. Only 'createAndGo', and 'destroy' values are allowed for this object. 'createAndWait' and 'notInService' values are not allowed. …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.22.3.4.2.1.10
fsAppPriSyncd This object indicates whether the current DesiredConfig has been received by the peer. This object is applicable only when the DCBX operating version is CEE	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.22.3.4.2.1.11
fsAppPriError This object indicates that an error has occurred during the configuration exchange with the peer. Error is also set to TRUE when the Compatible method for the feature fails.This object is applicable only when the DCB…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.22.3.4.2.1.12
fsAppPriDcbxStatus This object indicates the current DCBx status of the Application Priority feature.	DcbxStatus Type Values: 1 peerNotAdvFeat 2 peerNotAdvDcbx 3 notAdvertise 4 disabled 5 peerDisabled 6 peerInError 7 peerNWillingCompatibleCfg 8 cfgNotCompatible 9 ok 10 unknown	.1.3.6.1.4.1.29601.2.22.3.4.2.1.13

This table augments lldpXdot1dcbxAdminApplicationPriorityAppTable,
describing parameters of an application priority table.

fsAppPriXAppEntry row .1.3.6.1.4.1.29601.2.22.3.4.3.1

This table contains management information applicable to
an application entry.

Indexes

No indexes recorded

Column	Syntax	OID
fsAppPriXAppRowStatus The row status of Application Priority Mapping Entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.22.3.4.3.1.1

This table contains one row per port for the IEEE 802.1
organizationally defined LLDP Application PrioriyTLV on
the local system known to this agent

fslldpXdot1dcbxLocApplicationPriorityBasicEntry row .1.3.6.1.4.1.29601.2.22.3.4.4.1

Information about the IEEE 802.1 organizational defined
Application PriorityTLV LLDP extension.

Indexes

LLDP-V2-MIBlldpV2LocPortIfIndex

Column	Syntax	OID
fslldpXdot1dcbxLocApplicationPriorityWilling Indicates if the local system is willing to accept the Application Priority configuration of the remote system.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.22.3.4.4.1.1

This table contains one row per port for the IEEE 802.1
organizationally defined LLDP Application PrioriyTLV on
the local system known to this agent

fslldpXdot1dcbxAdminApplicationPriorityBasicEntry row .1.3.6.1.4.1.29601.2.22.3.4.5.1

Information about the IEEE 802.1 organizational defined
Application PriorityTLV LLDP extension.

Indexes

LLDP-V2-MIBlldpV2LocPortIfIndex

Column	Syntax	OID
fslldpXdot1dcbxAdminApplicationPriorityWilling Indicates if the local system is willing to accept the Application Priority configuration of the remote system.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.22.3.4.5.1.1

This table contains one row per port for the IEEE 802.1
organizationally defined LLDP Application Prioriy TLV
on the local system known to this agent

fslldpXdot1dcbxRemApplicationPriorityBasicEntry row .1.3.6.1.4.1.29601.2.22.3.4.6.1

Information about the IEEE 802.1 organizational defined
Application Priority TLV LLDP extension.

Indexes

LLDP-V2-MIBlldpV2RemTimeMark LLDP-V2-MIBlldpV2RemLocalIfIndex LLDP-V2-MIBlldpV2RemLocalDestMACAddress LLDP-V2-MIBlldpV2RemIndex

Column	Syntax	OID
fslldpXdot1dcbxRemApplicationPriorityWilling Indicates if the local system is willing to accept the Application Priority configuration of the remote system.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.22.3.4.6.1.1

A table that controls selection of Traffic Classes Supported
TLVs to be transmitted on individual ports.

fslldpXdot1dcbxConfigTCSupportedEntry row .1.3.6.1.4.1.29601.2.22.3.5.1.1

LLDP configuration information that controls the
transmission of IEEE 802.1 organizationally defined Traffic
Classes Supported TLV on LLDP transmission capable ports.

This configuration object augments the …

Indexes

No indexes recorded

Column	Syntax	OID
fslldpXdot1dcbxConfigTCSupportedTxEnable The fslldpXdot1dcbxConfigTCSupportedTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined port VLAN TLV transmission is allowed …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.22.3.5.1.1.1

This table contains one row per port for the IEEE 802.1
organizationally defined LLDP TCSupported TLV on the local
system known to this agent

fslldpXdot1dcbxLocTCSupportedEntry row .1.3.6.1.4.1.29601.2.22.3.5.2.1

Information about the IEEE 802.1 organizational defined
Traffic Classes Supported TLV LLDP extension.

Indexes

LLDP-V2-MIBlldpV2LocPortIfIndex

Column	Syntax	OID
fslldpXdot1dcbxLocTCSupported Indicates the number of traffic classes supported on the local system. A value of 0 indicates that 8 traffic classes are supported.	FsLldpXdot1dcbxTCSupportedCapacity Type Constraints: range: 0..7	.1.3.6.1.4.1.29601.2.22.3.5.2.1.1

This table contains one row per port for the IEEE 802.1
organizationally defined LLDP TCSupported TLV on the local
system known to this agent

fslldpXdot1dcbxRemTCSupportedEntry row .1.3.6.1.4.1.29601.2.22.3.5.3.1

Information about the IEEE 802.1 organizational defined
Traffic Classes Supported TLV LLDP extension.

Indexes

LLDP-V2-MIBlldpV2RemTimeMark LLDP-V2-MIBlldpV2RemLocalIfIndex LLDP-V2-MIBlldpV2RemLocalDestMACAddress LLDP-V2-MIBlldpV2RemIndex

Column	Syntax	OID
fslldpXdot1dcbxRemTCSupported Indicates the number of traffic classes supported on the local system. A value of 0 indicates that 8 traffic classes are supported.	FsLldpXdot1dcbxTCSupportedCapacity Type Constraints: range: 0..7	.1.3.6.1.4.1.29601.2.22.3.5.3.1.1

This table contains one row per port for the IEEE 802.1
organizationally defined LLDP TCSupported TLV on the local
system known to this agent

fslldpXdot1dcbxAdminTCSupportedEntry row .1.3.6.1.4.1.29601.2.22.3.5.4.1

Information about the IEEE 802.1 organizational defined
Traffic Classes Supported TLV LLDP extension.

Indexes

LLDP-V2-MIBlldpV2LocPortIfIndex

Column	Syntax	OID
fslldpXdot1dcbxAdminTCSupported Indicates the number of traffic classes supported on the local system. A value of 0 indicates that 8 traffic classes are supported. Note that generaly this represents a physical characteristic of the devi…	FsLldpXdot1dcbxTCSupportedCapacity Type Constraints: range: 0..7	.1.3.6.1.4.1.29601.2.22.3.5.4.1.1

This table contains the state variables of control state machine
for each port operating in CEE version.

fsDcbxCEECtrlEntry row .1.3.6.1.4.1.29601.2.22.3.6.2.1

This object specified the information about Control state variables and
control TLV counters as defined in DCBX base specification Rev 1.01.

Indexes

fsDcbxCEECtrlPortNumber

Column	Syntax	OID
fsDcbxCEECtrlPortNumber This object indicates the interface identifier for which the control state variables are maintained.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.29601.2.22.3.6.2.1.1
fsDcbxCEECtrlSeqNo This object specifies the current sequence number that is sent in DCBX control TLVs in CEE mode.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.6.2.1.2
fsDcbxCEECtrlAckNo This object specifies the current ACK number that is to be sent to peer in DCBX control TLVs in CEE mode.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.6.2.1.3
fsDcbxCEECtrlRcvdAckNo This object specifies the current ACK number that is sent by peer in DCBX control TLV in CEE mode.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.6.2.1.4
fsDcbxCEECtrlTxTLVCounter This object specifies the number of DCBX CEE frames transmitted per interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.6.2.1.5
fsDcbxCEECtrlRxTLVCounter This object specifies the number of DCBX CEE frames received per interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.6.2.1.6
fsDcbxCEECtrlRxTLVErrorCounter This object specifies the number of DCBX CEE frames discarded due to errors in the frame.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.22.3.6.2.1.7