APS-MIB Table View

This table lists the APS groups that have been configured
on the system.

apsConfigEntry row .1.3.6.1.2.1.10.49.1.1.2.1

A conceptual row in the apsConfigTable.

Indexes

apsConfigName

Column	Syntax	OID
apsConfigName A textual name for the APS group.	OctetString Constraints: range: 1-32	.1.3.6.1.2.1.10.49.1.1.2.1.1
apsConfigRowStatus The status of this APS group entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Also, all associated apsChanConfigEntry rows must represent a set …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.49.1.1.2.1.2
apsConfigMode The architecture of the APS group. onePlusOne The 1+1 architecture permanently bridges the working line to the protection line. oneToN The 1:n architecture all…	Enumerationr/w Enumerated Values: 1 onePlusOne 2 oneToN 3 onePlusOneCompatible 4 onePlusOneOptimized	.1.3.6.1.2.1.10.49.1.1.2.1.3
apsConfigRevert The revertive mode of the APS group. nonrevertive Traffic remains on the protection line until another switch request is received. revertive When the condition…	Enumerationr/w Enumerated Values: 1 nonrevertive 2 revertive	.1.3.6.1.2.1.10.49.1.1.2.1.4
apsConfigDirection The directional mode of the APS group. unidirectional The unidirectional mode provides protection in one direction. bidirectional The bidirectional mode provid…	Enumerationr/w Enumerated Values: 1 unidirectional 2 bidirectional	.1.3.6.1.2.1.10.49.1.1.2.1.5
apsConfigExtraTraffic This object enables or disables the transfer of extra traffic on the protection channel in a 1:n architecture. This object must be set to disabled if the architecture is 1+1. It may be necessary to disable this in order…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.2.1.10.49.1.1.2.1.6
apsConfigSdBerThreshold The Signal Degrade Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER). For example, a value of 5 indicates a BER …	Integer32r/w Constraints: range: 5-9	.1.3.6.1.2.1.10.49.1.1.2.1.7
apsConfigSfBerThreshold The Signal Failure Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER). For example, a value of 5 indicates a BER …	Integer32r/w Constraints: range: 3-5	.1.3.6.1.2.1.10.49.1.1.2.1.8
apsConfigWaitToRestore The Wait To Restore period in seconds. After clearing of a condition that necessitated an automatic switch, the wait to restore period must elapse before reverting. This is intended to avoid rapid switch …	secondsInteger32r/w Constraints: range: 0-720	.1.3.6.1.2.1.10.49.1.1.2.1.9
apsConfigCreationTime The value of sysUpTime at the time the row was created	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.49.1.1.2.1.10
apsConfigStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.49.1.1.2.1.11

This table provides status information about APS groups
that have been configured on the system.

apsStatusEntry row .1.3.6.1.2.1.10.49.1.2.1

A conceptual row in the apsStatusTable.

Indexes

No indexes recorded

Column	Syntax	OID
apsStatusK1K2Rcv The current value of the K1 and K2 bytes received on the protection channel.	ApsK1K2 Type Constraints: range: 2	.1.3.6.1.2.1.10.49.1.2.1.1
apsStatusK1K2Trans The current value of the K1 and K2 bytes transmitted on the protection channel.	ApsK1K2 Type Constraints: range: 2	.1.3.6.1.2.1.10.49.1.2.1.2
apsStatusCurrent The current status of the APS group. modeMismatch Modes other than 1+1 unidirectional monitor protection line K2 bit 5, which indicates the architecture and K2 bits 6-8, which indicate if t…	Bits Enumerated Values: 0 modeMismatch 1 channelMismatch 2 psbf 3 feplf 4 extraTraffic	.1.3.6.1.2.1.10.49.1.2.1.3
apsStatusModeMismatches A count of Mode Mismatch conditions. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of apsStatusDisconti…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.49.1.2.1.4
apsStatusChannelMismatches A count of Channel Mismatch conditions. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of apsStatusDisco…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.49.1.2.1.5
apsStatusPSBFs A count of Protection Switch Byte Failure conditions. This condition occurs when either an inconsistent APS byte or an invalid code is detected. An inconsistent APS byte occurs when no three consecutive K1 bytes of the …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.49.1.2.1.6
apsStatusFEPLFs A count of Far-End Protection-Line Failure conditions. This condition is declared based on receiving SF on the protection line in the K1 byte. Discontinuities in the value of this counter can occur at re-…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.49.1.2.1.7
apsStatusSwitchedChannel This field is set to the number of the channel that is currently switched to protection. The value 0 indicates no channel is switched to protection. The values 1-14 indicate that working channel is switched to protectio…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.10.49.1.2.1.8
apsStatusDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this APS group's counters suffered a discontinuity. The relevant counters are the specific instances associated with this APS group of any …	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.49.1.2.1.9

This table lists the SONET LTE interfaces on the system.
Each interface that is listed has an ifType value of
sonet(39).

apsMapEntry row .1.3.6.1.2.1.10.49.1.3.2.1

A conceptual row in the apsMapTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
apsMapGroupName A textual name for the APS group which this channel is included in. If the channel is not part of an APS group this value is set to a string of size 0. When an instance of apsChanConfigIfIndex is set equa…	OctetString Constraints: range: 0-32	.1.3.6.1.2.1.10.49.1.3.2.1.2
apsMapChanNumber This field is set to a unique channel number within an APS group. The value 0 indicates the null channel. The values 1-14 define a working channel. If the SONET LTE is not part of an APS group this value is set to -1. …	Integer32 Constraints: range: -1-14	.1.3.6.1.2.1.10.49.1.3.2.1.3

This table lists the APS channels that have been configured
in APS groups.

apsChanConfigEntry row .1.3.6.1.2.1.10.49.1.4.1

A conceptual row in the apsChanConfigTable.

Indexes

apsChanConfigGroupName apsChanConfigNumber

Column	Syntax	OID
apsChanConfigGroupName A textual name for the APS group which this channel is included in.	OctetString Constraints: range: 1-32	.1.3.6.1.2.1.10.49.1.4.1.1
apsChanConfigNumber This field is set to a unique channel number within an APS group. The value 0 indicates the null channel. The values 1-14 define a working channel. This field must be assigned a unique number within the…	Integer32 Constraints: range: 0-14	.1.3.6.1.2.1.10.49.1.4.1.2
apsChanConfigRowStatus The status of this APS channel entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. A row in the apsChanConfigTable may not be create…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.49.1.4.1.3
apsChanConfigIfIndex The Interface Index assigned to a SONET LTE. This is an interface with ifType sonet(39). The value of this object must be unique among all instances of apsChanConfigIfIndex. In other words, a particular SONET LTE can on…	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.10.49.1.4.1.4
apsChanConfigPriority The priority of the channel. This field determines whether high or low priority SD and SF codes are used in K1 requests. This field is only applicable if the channel is to be included in a …	Enumerationr/w Enumerated Values: 1 low 2 high	.1.3.6.1.2.1.10.49.1.4.1.5
apsChanConfigStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.49.1.4.1.6

This table allows commands to be sent to configured APS
groups.

apsCommandEntry row .1.3.6.1.2.1.10.49.1.5.1

A conceptual row in the apsCommandTable. This row exists only
if the associated apsConfigEntry is active.

Indexes

apsChanConfigGroupName apsChanConfigNumber

Column	Syntax	OID
apsCommandSwitch Allows the initiation of an APS switch command on the APS group and channel specified by the index values. When read this object returns the last command written or noCmd if no command has been written to…	ApsSwitchCommandr/w Type Values: 1 noCmd 2 clear 3 lockoutOfProtection 4 forcedSwitchWorkToProtect 5 forcedSwitchProtectToWork 6 manualSwitchWorkToProtect 7 manualSwitchProtectToWork 8 exercise	.1.3.6.1.2.1.10.49.1.5.1.1
apsCommandControl Allows the initiation of an APS control command on the APS group and channel specified by the index values. When read this object returns the last command written or noCmd if no command has been written t…	ApsControlCommandr/w Type Values: 1 noCmd 2 lockoutWorkingChannel 3 clearLockoutWorkingChannel	.1.3.6.1.2.1.10.49.1.5.1.2

This table contains status information for all SONET LTE
interfaces that are included in APS groups.

apsChanStatusEntry row .1.3.6.1.2.1.10.49.1.6.1

A conceptual row in the apsChanStatusTable.

Indexes

No indexes recorded

Column	Syntax	OID
apsChanStatusCurrent Indicates the current state of the port. lockedOut This bit, when applied to a working channel, indicates that the channel is prevented from switching to the protection line. When applied …	Bits Enumerated Values: 0 lockedOut 1 sd 2 sf 3 switched 4 wtr	.1.3.6.1.2.1.10.49.1.6.1.1
apsChanStatusSignalDegrades A count of Signal Degrade conditions. This condition occurs when the line Bit Error Rate exceeds the currently configured value of the relevant instance of apsConfigSdBerThreshold. Discontinuities in the …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.49.1.6.1.2
apsChanStatusSignalFailures A count of Signal Failure conditions that have been detected on the incoming signal. This condition occurs when a loss of signal, loss of frame, AIS-L or a Line bit error rate exceeding the currently configured value of…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.49.1.6.1.3
apsChanStatusSwitchovers When queried with index value apsChanConfigNumber other than 0, this object will return the number of times this channel has switched to the protection line. When queried with index value apsChanConfigNum…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.49.1.6.1.4
apsChanStatusLastSwitchover When queried with index value apsChanConfigNumber other than 0, this object will return the value of sysUpTime when this channel last completed a switch to the protection line. If this channel has never s…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.49.1.6.1.5
apsChanStatusSwitchoverSeconds The cumulative Protection Switching Duration (PSD) time in seconds. For a working channel, this is the cumulative number of seconds that service was carried on the protection line. For the protection line, this is the c…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.49.1.6.1.6
apsChanStatusDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this channel's counters suffered a discontinuity. The relevant counters are the specific instances associated with this channel of any Coun…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.49.1.6.1.7